Sposób sprawdzony i niestety nie działa. Obadam tickety pod podanym adresem. Jeśli wpadniecie na jakiś pomysł to dajcie znać.
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania
eko.one.pl → Posty przez kahoor
Znalezione posty: 13
1 2012-02-25 14:02:31
Odp: Brak netu po instalacji OpenWrt. (10 odpowiedzi, napisanych Oprogramowanie / Software)
2 2012-02-25 00:35:48
Odp: Brak netu po instalacji OpenWrt. (10 odpowiedzi, napisanych Oprogramowanie / Software)
Jedyny kabel jaki był wtedy podłączony do routera to koncówka linii od providera.
Nie zauważyłam żadnych problemów z połączeniem na standardowym fw.
3 2012-02-24 23:44:18
Odp: Brak netu po instalacji OpenWrt. (10 odpowiedzi, napisanych Oprogramowanie / Software)
root@kurnik:~$ dmesg
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #73 Sat Feb 4 09:48:30 CET 2012
prom: fw_arg0=00000006, fw_arg1=a3f6bfb0, fw_arg2=a3f6c450, fw_arg3=00000010
MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR7161 rev 2, CPU:680.000 MHz, AHB:170.000 MHz, DDR:340.000 MHz
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat 802e9200, node_mem_map 81000000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=WNDR3700v2 mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),14848k(rootfs),64k(art)ro,15872k@0x70000(firmware)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61648k/65536k available (2175k kernel code, 3820k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is NETGEAR WNDR3700v2
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
pci 0000:00:00.0: reg 10 32bit mmio pref: [0x000000-0xfffffff]
pci 0000:00:00.0: reg 14 io port: [0x00-0xff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
PCI: fixup device 0000:00:11.0
pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:11.0: PME# disabled
PCI: fixup device 0000:00:12.0
pci 0000:00:12.0: reg 10 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:12.0: PME# supported from D0 D3hot
pci 0000:00:12.0: PME# disabled
PCI: mapping irq 48 to pin1@0000:00:11.0
PCI: mapping irq 49 to pin1@0000:00:12.0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
yaffs Feb 3 2012 15:25:40 Installing.
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: mx25l12805d (16384 Kbytes)
6 cmdlinepart partitions found on MTD device spi0.0
Creating 6 MTD partitions on "spi0.0":
0x000000000000-0x000000050000 : "u-boot"
0x000000050000-0x000000070000 : "u-boot-env"
0x000000070000-0x000000170000 : "kernel"
0x000000170000-0x000000ff0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=A90000
0x000000560000-0x000000ff0000 : "rootfs_data"
0x000000ff0000-0x000001000000 : "art"
0x000000070000-0x000000ff0000 : "firmware"
Realtek RTL8366S ethernet switch driver version 0.2.2
rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
rtl8366s rtl8366s: RTL8366 ver. 1 chip found
rtl8366s: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
eth1: Atheros AG71xx at 0xba000000, irq 5
eth1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Realtek RTL8366S]
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=25)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
Registered led device: wndr3700:green:power
Registered led device: wndr3700:orange:power
Registered led device: wndr3700:green:wps
Registered led device: wndr3700:orange:wps
Registered led device: wndr3700:green:wan
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=48
PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Calling CRDA for country: US
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy1
ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=49
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR71xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
nf_conntrack version 0.5.0 (966 buckets, 3864 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
Hooked IMQ after mangle on PREROUTING
Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
Ebtables v2.0 registered
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ar71xx-ohci ar71xx-ohci: Atheros AR71xx built-in OHCI controller
ar71xx-ohci ar71xx-ohci: new USB bus registered, assigned bus number 2
ar71xx-ohci ar71xx-ohci: irq 14, io mem 0x1c000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Registered led device: wndr3700:green:usb
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
ar71xx: pll_reg 0xb8050014: 0x1099
eth1: link up (100Mbps/Full duplex)
ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
old minutes west=0, new minutes west=-60
eth1: link down
ar71xx: pll_reg 0xb8050014: 0x1099
eth1: link up (100Mbps/Full duplex)
eth1: link down
ar71xx: pll_reg 0xb8050014: 0x1099
eth1: link up (100Mbps/Full duplex)
eth1: link downoraz
Jan 1 01:18:24 kurnik user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1099
Jan 1 01:18:24 kurnik user.info kernel: eth1: link up (100Mbps/Full duplex)
Jan 1 01:18:27 kurnik user.notice ifup: Allowing Router Advertisements on wan ( eth1)
Jan 1 01:18:27 kurnik user.info firewall: adding wan (eth1) to zone wan
Jan 1 01:18:28 kurnik cron.err crond[2474]: crond (busybox 1.15.3) started, log level 5
Jan 1 01:18:28 kurnik user.warn kernel: ipt_bandwidth: timezone shift of 60 min utes detected, adjusting
Jan 1 01:18:28 kurnik user.warn kernel: old minutes west=0, new minutes west=-60
Jan 1 01:18:29 kurnik cron.err crond[2788]: crond (busybox 1.15.3) started, log level 5
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: reading /tmp/resolv.conf.auto
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 192.168.1.1#53
Jan 1 01:18:48 kurnik daemon.warn dnsmasq[860]: ignoring nameserver 192.168.2.1 - local interface
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain micro
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain micro
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain micro
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain oss
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain oss
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain oss
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain null
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain null
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain null
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain ing
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain ing
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain ing
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain indy
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain indy
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain indy
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain gopher
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain gopher
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain gopher
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain geek
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain geek
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain geek
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain fur
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain fur
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain fur
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain free
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain free
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain free
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain bbs
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain bbs
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain bbs
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain dyn
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain dyn
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain dyn
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain parody
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain parody
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain parody
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.142.171.235 #53 for domain glue
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 95.211.32.162# 53 for domain glue
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 66.244.95.20#5 3 for domain glue
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 78.47.86.43#53 for domain bit
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using nameserver 178.32.31.41#5 3 for domain bit
Jan 1 01:18:48 kurnik daemon.info dnsmasq[860]: using local addresses only for domain lan
Jan 1 01:21:01 kurnik cron.err crond[2788]: USER root pid 2835 cmd /bin/3gteste r
Jan 1 01:21:01 kurnik cron.err crond[2788]: USER root pid 2836 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 01:24:01 kurnik cron.err crond[2788]: USER root pid 2840 cmd /bin/3gteste r
Jan 1 01:24:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 01:27:01 kurnik cron.err crond[2788]: USER root pid 2847 cmd /bin/3gteste r
Jan 1 01:30:01 kurnik cron.err crond[2788]: USER root pid 2852 cmd /bin/3gteste r
Jan 1 01:31:01 kurnik cron.err crond[2788]: USER root pid 2855 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 01:33:01 kurnik cron.err crond[2788]: USER root pid 2857 cmd /bin/3gteste r
Jan 1 01:34:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 01:36:01 kurnik cron.err crond[2788]: USER root pid 2864 cmd /bin/3gteste r
Jan 1 01:39:01 kurnik cron.err crond[2788]: USER root pid 2867 cmd /bin/3gteste r
Jan 1 01:41:01 kurnik cron.err crond[2788]: USER root pid 2872 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 01:42:01 kurnik cron.err crond[2788]: USER root pid 2874 cmd /bin/3gteste r
Jan 1 01:43:47 kurnik authpriv.info dropbear[2877]: Child connection from 192.1 68.2.5:51898
Jan 1 01:44:07 kurnik authpriv.notice dropbear[2877]: Password auth succeeded f or 'root' from 192.168.2.5:51898
Jan 1 01:44:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 01:45:01 kurnik cron.err crond[2788]: USER root pid 2890 cmd /bin/3gteste r
Jan 1 01:48:01 kurnik cron.err crond[2788]: USER root pid 2893 cmd /bin/3gteste r
Jan 1 01:50:54 kurnik daemon.info dnsmasq-dhcp[860]: DHCPINFORM(br-lan) 192.168 .2.5 xx:xx:xx:xx:xx:xx
Jan 1 01:50:54 kurnik daemon.info dnsmasq-dhcp[860]: DHCPACK(br-lan) 192.168.2. 5 xx:xx:xx:xx:xx:xx Kahoor-Komputer
Jan 1 01:51:01 kurnik cron.err crond[2788]: USER root pid 3145 cmd /bin/3gteste r
Jan 1 01:51:01 kurnik cron.err crond[2788]: USER root pid 3146 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 01:54:01 kurnik cron.err crond[2788]: USER root pid 3150 cmd /bin/3gteste r
Jan 1 01:54:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 01:54:49 kurnik authpriv.info dropbear[2877]: Exit (root): Exited normall y
Jan 1 01:56:22 kurnik user.info kernel: eth1: link down
Jan 1 01:56:23 kurnik user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1099
Jan 1 01:56:23 kurnik user.info kernel: eth1: link up (100Mbps/Full duplex)
Jan 1 01:56:41 kurnik user.info kernel: eth1: link down
Jan 1 01:56:42 kurnik user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1099
Jan 1 01:56:42 kurnik user.info kernel: eth1: link up (100Mbps/Full duplex)
Jan 1 01:57:01 kurnik cron.err crond[2788]: USER root pid 3157 cmd /bin/3gteste r
Jan 1 02:00:01 kurnik cron.err crond[2788]: USER root pid 3162 cmd /bin/3gteste r
Jan 1 02:00:01 kurnik cron.err crond[2788]: USER root pid 3163 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 02:01:01 kurnik cron.err crond[2788]: USER root pid 3167 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 02:03:01 kurnik cron.err crond[2788]: USER root pid 3169 cmd /bin/3gteste r
Jan 1 02:04:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 02:06:01 kurnik cron.err crond[2788]: USER root pid 3176 cmd /bin/3gteste r
Jan 1 02:09:01 kurnik cron.err crond[2788]: USER root pid 3179 cmd /bin/3gteste r
Jan 1 02:11:01 kurnik cron.err crond[2788]: USER root pid 3184 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 02:12:01 kurnik cron.err crond[2788]: USER root pid 3186 cmd /bin/3gteste r
Jan 1 02:14:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 02:15:01 kurnik cron.err crond[2788]: USER root pid 3193 cmd /bin/3gteste r
Jan 1 02:18:01 kurnik cron.err crond[2788]: USER root pid 3196 cmd /bin/3gteste r
Jan 1 02:21:01 kurnik cron.err crond[2788]: USER root pid 3201 cmd /bin/3gteste r
Jan 1 02:21:01 kurnik cron.err crond[2788]: USER root pid 3202 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 02:24:01 kurnik cron.err crond[2788]: USER root pid 3206 cmd /bin/3gteste r
Jan 1 02:24:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 02:27:01 kurnik cron.err crond[2788]: USER root pid 3213 cmd /bin/3gteste r
Jan 1 02:30:01 kurnik cron.err crond[2788]: USER root pid 3218 cmd /bin/3gteste r
Jan 1 02:31:01 kurnik cron.err crond[2788]: USER root pid 3221 cmd /usr/bin/set _kernel_timezone >/dev/null 2>&1
Jan 1 02:32:04 kurnik user.info kernel: eth1: link down
Jan 1 02:33:01 kurnik cron.err crond[2788]: USER root pid 3223 cmd /bin/3gteste r
Jan 1 02:33:41 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 80 2.11: authenticated
Jan 1 02:33:41 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx IEEE 80 2.11: associated (aid 1)
Jan 1 02:33:41 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: pa irwise key handshake completed (RSN)
Jan 1 02:33:41 kurnik daemon.info dnsmasq-dhcp[860]: DHCPREQUEST(br-lan) 192.16 8.2.5 xx:xx:xx:xx:xx:xx
Jan 1 02:33:41 kurnik daemon.info dnsmasq-dhcp[860]: DHCPACK(br-lan) 192.168.2. 5 xx:xx:xx:xx:xx:xx Kahoor-Komputer
Jan 1 02:34:11 kurnik daemon.info dnsmasq-dhcp[860]: DHCPINFORM(br-lan) 192.168 .2.5 xx:xx:xx:xx:xx:xx
Jan 1 02:34:11 kurnik daemon.info dnsmasq-dhcp[860]: DHCPACK(br-lan) 192.168.2. 5 xx:xx:xx:xx:xx:xx Kahoor-Komputer
Jan 1 02:34:32 kurnik daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx WPA: gr oup key handshake completed (RSN)
Jan 1 02:36:01 kurnik cron.err crond[2788]: USER root pid 3252 cmd /bin/3gteste r
Jan 1 02:36:13 kurnik authpriv.info dropbear[3255]: Child connection from 192.1 68.2.5:49204
Jan 1 02:36:19 kurnik authpriv.notice dropbear[3255]: Password auth succeeded f Potrzeba czegos jeszcze? Nie ogarniam za bardzo logow.
Sloniu: Lokalny ISP. Byl nawet u mnie ale też nie wiedział gdzie jest problem 
RP614 podłączyłam w dniu dzisiejszym i hostname'a nie ustawiałam.
4 2012-02-24 22:42:48
Temat: Brak netu po instalacji OpenWrt. (10 odpowiedzi, napisanych Oprogramowanie / Software)
Witam!
Temat poruszałam jakiś czas temu. Niestety wtedy nie udało się go rozwiązać.
Bardzo potrzebuję paru funkcjonalności oferowanych przez alternatywny firmware dlatego postanowiłam powrócić do sprawy.
Posiadam Netgeara'a WNDR3700v2. Na oryginalnym sofcie działa bez problemu. Wystarczy sklonować mac adres.
Po wgraniu OpenWrt router nie może pobrać adresu IP na WANie. W tej chwili aby korzystać z OpenWrt mam wpięty router w router. Pośrednikiem jest router Netgeara RP614.
root@kurnik:~$ uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth0.1
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.ipaddr=192.168.2.1
network.lan.dns=192.168.2.1
network.wan=interface
network.wan.ifname=eth1
network.wan.proto=dhcp
network.wan.macaddr=XX:XX:XX:XX:XX:XX
network.@switch[0]=switch
network.@switch[0].name=rtl8366s
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch[0].blinkrate=2
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=rtl8366s
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 5t
network.@switch_port[0]=switch_port
network.@switch_port[0].device=rtl8366s
network.@switch_port[0].port=1
network.@switch_port[0].led=6
network.@switch_port[1]=switch_port
network.@switch_port[1].device=rtl8366s
network.@switch_port[1].port=2
network.@switch_port[1].led=9
network.@switch_port[2]=switch_port
network.@switch_port[2].device=rtl8366s
network.@switch_port[2].port=5
network.@switch_port[2].led=2
Oczywiście mogę żyć z tą dziwną topologią jednak denerwujący jest sam fakt, że nie działa coś co powinno..
5 2011-03-02 13:21:34
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
root@OpenWrt:~# uci show network.wan
network.wan=interface
network.wan.macaddr=00:1b:24:e3:9a:8a
network.wan.ifname=eth1
network.wan.ipaddr=192.168.130.107
network.wan.proto=static
network.wan.netmask=255.255.255.0
network.wan.gateway=192.168.130.1
network.wan.dns=192.168.110.1
root@OpenWrt:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.130.0 * 255.255.255.0 U 0 0 0 eth1
192.168.2.0 * 255.255.255.0 U 0 0 0 br-lan
default 192.168.130.1 0.0.0.0 UG 0 0 0 eth1
root@OpenWrt:~# ping 192.168.130.1
PING 192.168.130.1 (192.168.130.1): 56 data bytes
^[^Z[1]+ Stopped ping 192.168.130.1
eth1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:192.168.130.107 Bcast:192.168.130.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:5
6 2011-03-02 11:36:46
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
root@OpenWrt:~# uci show network.wan
network.wan=interface
network.wan.macaddr=00:1b:24:e3:9a:8a
network.wan.ifname=eth1
network.wan.ipaddr=192.168.130.107
network.wan.proto=static
7 2011-03-01 22:32:18
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Nadal glucha cisza. Route nie pokazuje zadnej bramki.
8 2011-03-01 19:40:19
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Wiem ze to wan dlatego wlasnie sie dziwie ze nie smiga.
network.wan.ipaddr=192.168.130.107 jest ustawione ale w ifconfig go nie widac. Nie mam pomyslu jak to inaczej przydzielic.
9 2011-03-01 19:11:06
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth0.1
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.ipaddr=192.168.2.1
network.wan=interface
network.wan.proto=dhcp
network.wan.macaddr=xx:xx:xx:xx:xx:xx
network.wan.ifname=eth1
network.wan.ipaddr=192.168.130.107
network.@switch[0]=switch
network.@switch[0].name=rtl8366s
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch[0].blinkrate=2
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=rtl8366s
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 5t
network.@switch_port[0]=switch_port
network.@switch_port[0].device=rtl8366s
network.@switch_port[0].port=1
network.@switch_port[0].led=6
network.@switch_port[1]=switch_port
network.@switch_port[1].device=rtl8366s
network.@switch_port[1].port=2
network.@switch_port[1].led=9
network.@switch_port[2]=switch_port
network.@switch_port[2].device=rtl8366s
network.@switch_port[2].port=5
network.@switch_port[2].led=2
root@OpenWrt:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 * 255.255.255.0 U 0 0 0 br-lan
root@OpenWrt:~# ifconfig
br-lan Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1467 errors:0 dropped:0 overruns:0 frame:0
TX packets:213 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:84031 (82.0 KiB) TX bytes:22772 (22.2 KiB)
eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1510 errors:0 dropped:0 overruns:0 frame:0
TX packets:215 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:113384 (110.7 KiB) TX bytes:24709 (24.1 KiB)
Interrupt:4
eth0.1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1467 errors:0 dropped:0 overruns:0 frame:0
TX packets:213 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:89899 (87.7 KiB) TX bytes:23624 (23.0 KiB)
eth1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:5
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
mon.wlan0 Link encap:UNSPEC HWaddr E0-91-F5-CC-D0-34-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2415 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:298317 (291.3 KiB) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr E0:91:F5:CC:D0:34
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:7704 (7.5 KiB)
W eth1 mam ustawiony taki mac jaki ma karta sieciowa laptopa.
Na sztywno przypisanego adresu dla wanu nigdzie nie widze.
10 2011-02-28 12:25:01
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Pozniej sprawdze te ustawienia. Najdziwniejsze jest to ze na oryginalnym firmware router dzialal. Wystarczylo ustawic odpowiedni mac.
11 2011-02-28 12:16:45
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Nie. W sekcji network > wan jest "not connected". Zaden pakiet nie wchodzi/wychodzi.
12 2011-02-28 11:23:37
Odp: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Dlugosc mac'a jest dobra. Nie chcialo mi sie tyle pisac. Na tych usatwieniach ktore teraz sa router bez problemu laczy sie z siecia u zmajomego (podlaczenie do modemu nietii) a u mnie nie chce dzialac.
13 2011-02-27 22:22:26
Temat: Wndr3700 - brak polaczenia z internetem. (24 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
Udalo mi sie skonfigurowac openwrt na routerze netgear wndr 3700.
Niestety mimo prawidlowej konfiguracji nie moge uzyskac polaczenia z internetem.
root@OpenWrt:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 * 255.255.255.0 U 0 0 0 br-lan
root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.ifname=eth0.1
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.ipaddr=192.168.2.1
network.wan=interface
network.wan.ifname=eth1
network.wan.macaddr=xx:xx:xx:xx:xx
network.wan.proto=dhcp
network.@switch[0]=switch
network.@switch[0].name=rtl8366s
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch[0].blinkrate=2
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=rtl8366s
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 5t
network.@switch_port[0]=switch_port
network.@switch_port[0].device=rtl8366s
network.@switch_port[0].port=1
network.@switch_port[0].led=6
network.@switch_port[1]=switch_port
network.@switch_port[1].device=rtl8366s
network.@switch_port[1].port=2
network.@switch_port[1].led=9
network.@switch_port[2]=switch_port
network.@switch_port[2].device=rtl8366s
network.@switch_port[2].port=5
network.@switch_port[2].led=2
Korzystam z sieci osiedlowej, weryfikacja uzytkownika po adresie mac.
Wynik ipconfig po bezposrednim polaczeniu do sieci (bez ww routera).
Karta Ethernet Połączenie lokalne:
Sufiks DNS konkretnego połączenia :
Opis. . . . . . . . . . . . . . . : Realtek RTL8101E Family PCI-E Fast Ethern
et NIC (NDIS 6.0)
Adres fizyczny. . . . . . . . . . :
DHCP włączone . . . . . . . . . . : Tak
Autokonfiguracja włączona . . . . : Tak
Adres IPv6 połączenia lokalnego . :
Adres IPv4. . . . . . . . . . . . . : 192.168.130.107(Preferowane)
Maska podsieci. . . . . . . . . . : 255.255.255.0
Dzierżawa uzyskana. . . . . . . . : 27 lutego 2011 21:25:59
Dzierżawa wygasa. . . . . . . . . : 28 lutego 2011 21:25:58
Brama domyślna. . . . . . . . . . : 192.168.130.1
Serwer DHCP . . . . . . . . . . . : 192.168.110.1
Identyfikator IAID DHCPv6 . . . . :
Identyfikator DUID klienta DHCPv6 :
Serwery DNS . . . . . . . . . . . : 192.168.110.1
Podstawowy serwer WINS. . . . . . : 217.168.129.101
NetBIOS przez Tcpip . . . . . . . : Włączony
Z gory dziekuje za pomoc.
Pozdrawiam
Znalezione posty: 13
Strony 1
eko.one.pl → Posty przez kahoor
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc