1 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

Tak z ciekawostek na 19 od Cezarego też działa.
W zasadzie jajko prawie to samo w 18 jest 4.14.152 a w 19 4.14.155 więc widać, że nie ma co specjalnie kompilować na siłę.
kmod-input-core i kmod-i2c-mux zainstalowane z repo.
W modules.d zrobiłem dopisałem by moduły się ładowały, ale karty/kart nie widać w systemie logread też nic nie pokazuje.
Starą metodą zrobiłem wpis w rc.local:
insmod input-core
insmod rc-core
insmod dvb-core
insmod dvb_usb_v2
#insmod rtl2830 - akurat dla moich kart niepotrzebny
insmod rtl2832
insmod r820t
insmod dvb-usb-rtl28xxu
I wszystko działa jak należy

pd

Idź do forum: Oprogramowanie / Software

2 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

@pawkon Jak coś to ja wgram... spokojnie nawet jak padnie to go podniosę tak czy owak.
Nie problem flasha wrzucić w programator;)
Jeśli chodzi o transkoding to pamiętaj iż nie masz wsparcia sprzętowego dla np. h264 więc to jest ciut za mało dla obliczeń przy transkodingu jeśli rozpatrujesz to że inne sprzęty to potrafią... ot zawsze diabeł tkwi w szczegółach.
Kiedyś bawiłem sie w transkoding na I3 i bez wsparcia GPU szkoda procka było na to marnować, ale to była inna architektura natomiast bardzo zbliżona do budowy tego typu sprzętów jakie w tym wątku.

Idź do forum: Oprogramowanie / Software

3 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

Myślę, że dvb_usb_v2 i i2c_mux tutaj robią tutaj całą robotę reszta nie ma znaczenia wg mojej skromnej opinii.
Przy wcześniejszych próbach i2c_mux instalowałem i2c_mux z repo dodatkowo dociągał i2c-core
Przy obecnej konfiguracji został tylko załadowany i2c_mux ręcznie i wszedł wcześniej zgłaszał jakiś błąd (HGW).
W zasadzie można by było przywrócić kompilację tych modułów przy tym stanie na każdą platformę. Ciekawe czy na 19 tak samo się zachowa...
Jakbyś miał chwilę to możemy to sprawdzić, sprzęt i tak na razie stoi u mnie na stole jako "zabawka" przed przejściem na tą platformę.
A i co do AR71xx to też mam gdzie testnąć kolega ma Archera C7, ale na razie na LEDE jedzie bo na tym działa, a mi się kurzy WRT160nl.
Jeszcze raz ukłony za poświęcony czas i chęć współpracy by nie trzeba było wyważać "otwartych" drzwi.
@Cezary jak temat zostanie w miarę ogarnięty można by to ponownie wrzucić tak jak kiedyś było w starszych wydaniach.
A tutka na koniec zrobię i można będzie podpiąć dla potomnych.
Może nie jest to idealne rozwiązanie, ale skuteczne.
pd

Idź do forum: Oprogramowanie / Software

4 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

Więc tak...
Obraz od Cezarego ostatni z gałęzi 18.06
zlib, libopenssl i tvheadend zainstalowane z repo openwrt.
tvheadend po zainstalowaniu zostało wyłączone i zatrzymane by nie "bruździło" w niczym.
kmod-input-core z repo też zainstalowane.
Następnie skopiowane moduły:
i2c-mux
rc-core
dvb-core
dvb_usb_v2
rtl2830
rtl2832
r820t
dvb-usb-rtl28xxu
i załadowane wg poniższej kolejności:
insmod input-core
insmod i2c-mux
insmod rc-core
insmod dvb-core
insmod dvb_usb_v2
insmod rtl2830
insmod rtl2832
insmod r820t
insmod dvb-usb-rtl28xxu
lsmod wygląda tak:
root@OpenWrt:~# lsmod
cfg80211              204800  2 mwlwifi,mac80211
compat                 12288  2 mac80211,cfg80211
crc_ccitt              12288  1 ppp_async
dvb_core               77824  3 rtl2832,rtl2830,dvb_usb_v2,[permanent]
dvb_usb_rtl28xxu       20480  0 [permanent]
dvb_usb_v2             16384  1 dvb_usb_rtl28xxu
fat                    53248  1 vfat
gpio_button_hotplug    12288  0
i2c_mux                12288  2 rtl2832,rtl2830
input_core             28672  2 rc_core
ip_tables              20480  4 iptable_nat,iptable_mangle,iptable_filter
ip6_tables             20480 24 ip6table_mangle,ip6table_filter
ip6t_REJECT            12288  2
ip6table_filter        12288  1
ip6table_mangle        12288  1
ipt_MASQUERADE         12288  1
ipt_REJECT             12288  2
iptable_filter         12288  1
iptable_mangle         12288  1
iptable_nat            12288  1
mac80211              385024  1 mwlwifi
mwlwifi               147456  0
nf_conntrack           65536 13 nf_conntrack_ipv6,ipt_MASQUERADE,xt_state,xt_nat,xt_conntrack,xt_REDIRECT,xt_CT,nf_nat_masquerade_ipv4,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat,nf_flow_table,nf_conntrack_rtcache
nf_conntrack_ipv4      12288 11
nf_conntrack_ipv6      12288  5
nf_conntrack_rtcache   12288  0
nf_defrag_ipv4         12288  1 nf_conntrack_ipv4
nf_defrag_ipv6         12288  1 nf_conntrack_ipv6
nf_flow_table          20480  2 xt_FLOWOFFLOAD,nf_flow_table_hw
nf_flow_table_hw       12288  1
nf_log_common          12288  2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4            12288  0
nf_log_ipv6            12288  0
nf_nat                 20480  4 xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4,nf_nat_ipv4
nf_nat_ipv4            12288  1 iptable_nat
nf_nat_masquerade_ipv4   12288  1 ipt_MASQUERADE
nf_nat_redirect        12288  1 xt_REDIRECT
nf_reject_ipv4         12288  1 ipt_REJECT
nf_reject_ipv6         12288  1 ip6t_REJECT
nls_cp437              12288  0
nls_iso8859_1          12288  0
nls_utf8               12288  0
ppp_async              16384  0
ppp_generic            28672  3 pppoe,ppp_async,pppox
pppoe                  16384  0
pppox                  12288  1 pppoe
r820t                  24576  1
rc_core                24576  3 dvb_usb_rtl28xxu,dvb_usb_v2,[permanent]
rtl2830                16384  0 [permanent]
rtl2832                12288  1 [permanent]
slhc                   12288  1 ppp_generic
uas                    16384  0
vfat                   16384  0
x_tables               16384 24 ipt_REJECT,ipt_MASQUERADE,xt_time,xt_tcpudp,xt_state,xt_nat,xt_multiport,xt_mark,xt_mac,xt_limit,xt_conntrack,xt_comment,xt_TCPMSS,xt_REDIRECT,xt_LOG,xt_FLOWOFFLOAD,xt_CT,iptable_mangle,iptable_filter,ip_tables,ip6t_REJECT,ip6table_mangle,ip6table_filter,ip6_tables

Urządzenie jak i wcześniej widziane w /dev/dvb/... ale z tą różnicą, że:
/etc/init.d/tvheadend start - nie powoduje restartu routera i teraz wisienka na torcie:)
tvheadend widzi kartę/karty (mam dwie takie same, testowałem i na jednej i na dwóch).
Ot działa pomimo że niektóre moduły mają [permanent]
Ciekawe gdzie diabeł tkwi...
pd
Więc krok do przodu. Dobra robota @pawkon

Idź do forum: Oprogramowanie / Software

5 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

Ogarnę "dom" i sprawdzę, dam znać. Dzięki za zainteresowanie;)

Idź do forum: Oprogramowanie / Software

6 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

Ok. dzięki za info.
Jak będziesz przekompilowywał to zrób od razu dla 19 zobaczymy czy pójdzie mam jeszcze AR71xx, ale to na spokojnie.

Idź do forum: Oprogramowanie / Software

7 Odpowiedź przez pd79

(71 odpowiedzi, napisanych Oprogramowanie / Software)

@pawkon dla jakiego kernela kompilowałeś moduły?
Niby wszystko załadowane...
Też walczę z tymi co są tutaj załączone, ale po uruchomieniu tvheadend następuje restart routera.
Jakbyś mógł się nimi podzielić byłbym zobowiązany
pd

Idź do forum: Oprogramowanie / Software

8 Odpowiedź przez pd79

(534 odpowiedzi, napisanych Oprogramowanie / Software)

Dziękuję Cezary

Idź do forum: Oprogramowanie / Software

9 Odpowiedź przez pd79

(534 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary czy mógłbyś pomóc przy kompilacji oscam z patchem pod 1813.
Ewentualnie wskazać jak Ty kompilujesz bo pod simple build binarka na tp-linka 3600/4300 nie działa natomiast Twoje działają bez problemu.

Idź do forum: Oprogramowanie / Software

10 Odpowiedź przez pd79

(4 odpowiedzi, napisanych Oprogramowanie / Software)

WiFi przy tym rozwiązaniu jest wąskim gardłem.

Idź do forum: Oprogramowanie / Software

11 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Wiec teraz czas testów...
Wielkie dzięki Cezary za wkład i chęci
Ot kolejne pudełko zostało ucywilizowane;)

Idź do forum: Oprogramowanie / Software

12 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

No i nastała jasność w eterze:)
Radio ożyło

Idź do forum: Oprogramowanie / Software

13 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.456000] NET: Registered protocol family 1
Tue Nov 24 18:50:53 2015 kern.debug kernel: [    0.460000] PCI: CLS 0 bytes, default 32
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.460000] gptu: totally 6 16-bit timers/counters
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.468000] gptu: misc_register on minor 63
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.472000] gptu: succeeded to request irq 126
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.476000] gptu: succeeded to request irq 127
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.480000] gptu: succeeded to request irq 128
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.484000] gptu: succeeded to request irq 129
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.488000] gptu: succeeded to request irq 130
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.492000] gptu: succeeded to request irq 131
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.500000] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a2x.bin
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.504000] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 3940000
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.512000] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 3940000
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.620000] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.636000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.640000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.668000] msgmni has been set to 116
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.672000] io scheduler noop registered
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.676000] io scheduler deadline registered (default)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.680000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.688000] console [ttyLTQ0] enabled
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.696000] bootconsole [early0] disabled
Tue Nov 24 18:50:53 2015 kern.warn kernel: [    0.712000] m25p80 spi32766.0: found s25fl064k, expected en25q64
Tue Nov 24 18:50:53 2015 kern.info kernel: [    0.716000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.720000] 5 ofpart partitions found on MTD device spi32766.0
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.728000] Creating 5 MTD partitions on "spi32766.0":
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.732000] 0x000000000000-0x000000020000 : "u-boot"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.736000] 0x000000020000-0x0000006c0000 : "firmware"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.744000] 0x0000001ab468-0x0000006c0000 : "rootfs"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.748000] mtd: device 2 (rootfs) set to be root filesystem
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.756000] 1 squashfs-split partitions found on MTD device rootfs
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    0.760000] 0x0000004a0000-0x0000006c0000 : "rootfs_data"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    1.580000] 0x0000006c0000-0x0000007c0000 : "dsl_fw"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    1.584000] 0x0000007c0000-0x0000007d0000 : "config"
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    1.592000] 0x0000007d0000-0x000000800000 : "boardconfig"
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.700000] libphy: lantiq,xrx200-mdio: probed
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.776000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.844000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.912000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.980000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.988000] wdt 1f8803f0.watchdog: Init done
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.992000] TCP: cubic registered
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.992000] NET: Registered protocol family 17
Tue Nov 24 18:50:53 2015 kern.info kernel: [    1.996000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Tue Nov 24 18:50:53 2015 kern.notice kernel: [    2.012000] Bridge firewalling registered
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.016000] 8021q: 802.1Q VLAN Support v1.8
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.088000] ath9k,eeprom ath9k_eep: pci slot: 0
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.092000] pci 0000:02:00.0: fixup device configuration
Tue Nov 24 18:50:53 2015 kern.warn kernel: [    2.100000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Tue Nov 24 18:50:53 2015 kern.warn kernel: [    2.104000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.112000] pci 0000:02:00.0: fixup info: [168c:ff1c] revision 01 class 0x020000
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.116000] ath9k,eeprom ath9k_eep: using led pin 0.
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.124000] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
Tue Nov 24 18:50:53 2015 kern.err kernel: [    2.136000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.216000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Tue Nov 24 18:50:53 2015 kern.info kernel: [    2.224000] Freeing unused kernel memory: 152K (8049a000 - 804c0000)
Tue Nov 24 18:50:53 2015 kern.info kernel: [    6.912000] eth0: port 5 got link
Tue Nov 24 18:50:53 2015 user.info kernel: [   15.300000] init: Console is alive
Tue Nov 24 18:50:53 2015 user.info kernel: [   15.304000] init: - watchdog -
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   32.964000] random: nonblocking pool is initialized
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   34.456000] SCSI subsystem initialized
Tue Nov 24 18:50:53 2015 kern.info kernel: [   34.464000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Tue Nov 24 18:50:53 2015 kern.info kernel: [   34.472000] ehci-platform: EHCI generic platform driver
Tue Nov 24 18:50:53 2015 kern.info kernel: [   34.480000] dwc2 1e101000.ifxhcd: requested GPIO 489
Tue Nov 24 18:50:53 2015 kern.info kernel: [   35.344000] dwc2 1e101000.ifxhcd: DWC OTG Controller
Tue Nov 24 18:50:53 2015 kern.info kernel: [   35.344000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Tue Nov 24 18:50:53 2015 kern.info kernel: [   35.352000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Tue Nov 24 18:50:53 2015 kern.err kernel: [   35.360000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Tue Nov 24 18:50:53 2015 kern.err kernel: [   35.360000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Tue Nov 24 18:50:53 2015 kern.info kernel: [   35.372000] hub 1-0:1.0: USB hub found
Tue Nov 24 18:50:53 2015 kern.info kernel: [   35.376000] hub 1-0:1.0: 1 port detected
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.240000] dwc2 1e106000.ifxhcd: DWC OTG Controller
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.240000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.248000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Tue Nov 24 18:50:53 2015 kern.err kernel: [   36.256000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Tue Nov 24 18:50:53 2015 kern.err kernel: [   36.256000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.268000] hub 2-0:1.0: USB hub found
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.272000] hub 2-0:1.0: 1 port detected
Tue Nov 24 18:50:53 2015 kern.info kernel: [   36.280000] usbcore: registered new interface driver usb-storage
Tue Nov 24 18:50:53 2015 user.info kernel: [   36.472000] init: - preinit -
Tue Nov 24 18:50:53 2015 user.info kernel: [   40.208000] mount_root: loading kmods from internal overlay
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   47.520000] jffs2: notice: (312) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Nov 24 18:50:53 2015 user.info kernel: [   47.536000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Tue Nov 24 18:50:53 2015 user.info kernel: [   47.612000] block: extroot: not configured
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   48.960000] jffs2: notice: (309) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Nov 24 18:50:53 2015 user.info kernel: [   54.880000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Tue Nov 24 18:50:53 2015 user.info kernel: [   54.932000] block: extroot: not configured
Tue Nov 24 18:50:53 2015 user.info kernel: [   54.936000] mount_root: switching to jffs2 overlay
Tue Nov 24 18:50:53 2015 user.info kernel: [   54.984000] procd: - early -
Tue Nov 24 18:50:53 2015 user.info kernel: [   54.984000] procd: - watchdog -
Tue Nov 24 18:50:53 2015 user.info kernel: [   55.744000] procd: - ubus -
Tue Nov 24 18:50:53 2015 user.info kernel: [   56.752000] procd: - init -
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.704000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.704000]

Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.720000] NET: Registered protocol family 8
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.720000] NET: Registered protocol family 20
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.740000] PPP generic driver version 2.4.2
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.756000] MEI CPE Driver, Version 1.2.0
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.756000]

Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.756000] (c) Copyright 2009, Infineon Technologies AG
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.756000]
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.764000]

Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.764000]
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.764000] Lantiq CPE API Driver version: DSL CPE API V4.11.4
Tue Nov 24 18:50:53 2015 kern.warn kernel: [   57.780000]
Tue Nov 24 18:50:53 2015 kern.warn kernel: [   57.780000] Predefined debug level: 2
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.788000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.796000] Backport generated by backports.git backports-20150129-0-gdd4a670
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.804000] Infineon Technologies DEU driver version 2.0.0
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.812000] IFX DEU DES initialized (multiblock).
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.816000] IFX DEU AES initialized (multiblock).
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.820000] IFX DEU ARC4 initialized (multiblock).
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.824000] IFX DEU SHA1 initialized.
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.828000] IFX DEU MD5 initialized.
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.832000] IFX DEU SHA1_HMAC initialized.
Tue Nov 24 18:50:53 2015 kern.notice kernel: [   57.836000] IFX DEU MD5_HMAC initialized.
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.848000] nf_conntrack version 0.5.0 (936 buckets, 3744 max)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.872000] NET: Registered protocol family 24
Tue Nov 24 18:50:53 2015 kern.info kernel: [   57.896000] xt_time: kernel timezone is -0000
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.040000] cfg80211: Calling CRDA to update world regulatory domain
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.048000] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.056000] cfg80211: World regulatory domain updated:
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.056000] cfg80211:  DFS Master region: unset
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.064000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.072000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.080000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.088000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.096000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.104000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.112000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.120000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Tue Nov 24 18:50:53 2015 kern.info kernel: [   58.128000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Tue Nov 24 18:50:59 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Tue Nov 24 18:51:05 2015 kern.info kernel: [   75.284000] device eth0.1 entered promiscuous mode
Tue Nov 24 18:51:05 2015 kern.info kernel: [   75.288000] device eth0 entered promiscuous mode
Tue Nov 24 18:51:05 2015 kern.info kernel: [   75.324000] br-lan: port 1(eth0.1) entered forwarding state
Tue Nov 24 18:51:05 2015 kern.info kernel: [   75.328000] br-lan: port 1(eth0.1) entered forwarding state
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'lan' is enabled
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'lan' is setting up now
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'lan' is now up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'loopback' is enabled
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'loopback' is now up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Network device 'eth0' link is up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Network device 'lo' link is up
Tue Nov 24 18:51:05 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Nov 24 18:51:06 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Nov 24 18:51:07 2015 daemon.err block: /dev/mtdblock3 is already mounted
Tue Nov 24 18:51:07 2015 kern.info kernel: [   76.808000] PTM 1.0.27    PTM (E1) firmware version 0.30
Tue Nov 24 18:51:07 2015 kern.warn kernel: [   76.812000] ifxmips_ptm: PTM init succeed
Tue Nov 24 18:51:07 2015 kern.info kernel: [   77.332000] br-lan: port 1(eth0.1) entered forwarding state
Tue Nov 24 18:51:09 2015 cron.info crond[867]: crond (busybox 1.23.2) started, log level 5
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: started, version 2.73 cachesize 150
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: DNS service limited to local subnets
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq-dhcp[908]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: using local addresses only for domain lan
Tue Nov 24 18:51:13 2015 daemon.warn dnsmasq[908]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: read /etc/hosts - 1 addresses
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq[908]: read /tmp/hosts/dhcp - 1 addresses
Tue Nov 24 18:51:13 2015 daemon.info dnsmasq-dhcp[908]: read /etc/ethers - 0 addresses
Tue Nov 24 18:51:14 2015 daemon.notice netifd: Interface 'wan' is enabled
Tue Nov 24 18:51:14 2015 daemon.notice netifd: Network device 'nas0' link is up
Tue Nov 24 18:51:14 2015 local2.notice br2684ctl[835]: Interface "nas0" created sucessfully
Tue Nov 24 18:51:14 2015 local2.notice br2684ctl[835]: Communicating over ATM 0.1.32, encapsulation: LLC
Tue Nov 24 18:51:14 2015 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Nov 24 18:51:14 2015 daemon.notice netifd: Interface 'wan' is setting up now
Tue Nov 24 18:51:14 2015 local2.err br2684ctl[835]: Fatal: failed to connect on socket; No such device
Tue Nov 24 18:51:18 2015 daemon.info pppd[977]: Plugin rp-pppoe.so loaded.
Tue Nov 24 18:51:18 2015 daemon.info pppd[977]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Tue Nov 24 18:51:18 2015 daemon.notice pppd[977]: pppd 2.4.7 started by root, uid 0
Tue Nov 24 18:51:20 2015 authpriv.info dropbear[881]: Not backgrounding
Tue Nov 24 18:51:22 2015 user.emerg syslog: setting up led usb
Tue Nov 24 18:51:22 2015 user.emerg syslog: setting up led usb2
Tue Nov 24 18:51:22 2015 user.emerg syslog: setting up led internet
Tue Nov 24 18:51:22 2015 user.emerg syslog: setting up led dsl
Tue Nov 24 18:51:22 2015 user.emerg syslog: setting up led wps
Tue Nov 24 18:51:22 2015 authpriv.info dropbear[1023]: Child connection from 192.168.1.111:2217
Tue Nov 24 18:51:23 2015 daemon.info procd: - init complete -
Tue Nov 24 18:51:33 2015 authpriv.notice dropbear[1023]: Password auth succeeded for 'root' from 192.168.1.111:2217
Tue Nov 24 18:51:33 2015 daemon.warn pppd[977]: Timeout waiting for PADO packets
Tue Nov 24 18:51:33 2015 daemon.err pppd[977]: Unable to complete PPPoE Discovery
Tue Nov 24 18:51:33 2015 daemon.info pppd[977]: Exit.
Tue Nov 24 18:51:33 2015 daemon.notice netifd: Interface 'wan' is now down
Tue Nov 24 18:51:34 2015 daemon.notice netifd: Interface 'wan' is disabled
Tue Nov 24 18:51:34 2015 daemon.notice netifd: Interface 'wan' is enabled
Tue Nov 24 18:51:34 2015 daemon.notice netifd: Interface 'wan' is setting up now
Tue Nov 24 18:51:34 2015 daemon.info pppd[1141]: Plugin rp-pppoe.so loaded.
Tue Nov 24 18:51:34 2015 daemon.info pppd[1141]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Tue Nov 24 18:51:34 2015 daemon.notice pppd[1141]: pppd 2.4.7 started by root, uid 0

Idź do forum: Oprogramowanie / Software

14 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Po wgraniu...
WiFi dalej się nie podnosi.
Mam gdzieś stary obraz znaleziony w sieci na którym WiFi działa ale z adslem był problem (nie było binarek do jego obsługi, a jak się je załadowało to zrywało cały czas synchronizację).
Może to będzie jakoś pomocne?

Idź do forum: Oprogramowanie / Software

15 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Dlatego poruszyłem ten temat.
p;)

Idź do forum: Oprogramowanie / Software

16 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Tak tylko tam był problem z przepełnianiem stosu pamięci przy obsłudze USB.
A ostatnio to poprawili ...

Idź do forum: Oprogramowanie / Software

17 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Ok dzięki za chęci;)
Jak to się mówi próba nie strzelba.
A kto nie próbuje ten nie ma.
p

Idź do forum: Oprogramowanie / Software

18 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

uci: Entry not found

wink dlatego zwróciłem się do Ciebie Cezary
mam narazie w domu zamieszanie poprzeprowadzkowe i sprzęt jeszcze nie popodłączany.
A chciałbym pomóc poprostu koledze.

Idź do forum: Oprogramowanie / Software

19 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.452000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.456000] NET: Registered protocol family 1
Mon Nov 23 23:40:21 2015 kern.debug kernel: [    0.460000] PCI: CLS 0 bytes, default 32
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.460000] gptu: totally 6 16-bit timers/counters
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.468000] gptu: misc_register on minor 63
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.472000] gptu: succeeded to request irq 126
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.476000] gptu: succeeded to request irq 127
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.480000] gptu: succeeded to request irq 128
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.484000] gptu: succeeded to request irq 129
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.488000] gptu: succeeded to request irq 130
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.492000] gptu: succeeded to request irq 131
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.500000] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a2x.bin
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.504000] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 3940000
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.512000] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 3940000
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.620000] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.640000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.644000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.668000] msgmni has been set to 116
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.672000] io scheduler noop registered
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.676000] io scheduler deadline registered (default)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.680000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.688000] console [ttyLTQ0] enabled
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.696000] bootconsole [early0] disabled
Mon Nov 23 23:40:21 2015 kern.warn kernel: [    0.712000] m25p80 spi32766.0: found s25fl064k, expected en25q64
Mon Nov 23 23:40:21 2015 kern.info kernel: [    0.716000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.720000] 5 ofpart partitions found on MTD device spi32766.0
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.728000] Creating 5 MTD partitions on "spi32766.0":
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.732000] 0x000000000000-0x000000020000 : "u-boot"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.736000] 0x000000020000-0x0000006c0000 : "firmware"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.744000] 0x0000001ab51c-0x0000006c0000 : "rootfs"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.752000] mtd: device 2 (rootfs) set to be root filesystem
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.756000] 1 squashfs-split partitions found on MTD device rootfs
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    0.760000] 0x0000004a0000-0x0000006c0000 : "rootfs_data"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    1.584000] 0x0000006c0000-0x0000007c0000 : "dsl_fw"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    1.588000] 0x0000007c0000-0x0000007d0000 : "config"
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    1.592000] 0x0000007d0000-0x000000800000 : "boardconfig"
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.700000] libphy: lantiq,xrx200-mdio: probed
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.776000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.844000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.912000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.980000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.988000] wdt 1f8803f0.watchdog: Init done
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.992000] TCP: cubic registered
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.992000] NET: Registered protocol family 17
Mon Nov 23 23:40:21 2015 kern.info kernel: [    1.996000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Mon Nov 23 23:40:21 2015 kern.notice kernel: [    2.012000] Bridge firewalling registered
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.016000] 8021q: 802.1Q VLAN Support v1.8
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.088000] ath9k,eeprom ath9k_eep: pci slot: 0
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.092000] pci 0000:02:00.0: fixup device configuration
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.100000] pci 0000:02:00.0: fixup info: [168c:ff1c] revision 01 class 0x020000
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.108000] ath9k,eeprom ath9k_eep: using led pin 0.
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.112000] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
Mon Nov 23 23:40:21 2015 kern.err kernel: [    2.120000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.204000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Mon Nov 23 23:40:21 2015 kern.info kernel: [    2.212000] Freeing unused kernel memory: 152K (8049a000 - 804c0000)
Mon Nov 23 23:40:21 2015 kern.info kernel: [    6.880000] eth0: port 5 got link
Mon Nov 23 23:40:21 2015 user.info kernel: [   15.308000] init: Console is alive
Mon Nov 23 23:40:21 2015 user.info kernel: [   15.308000] init: - watchdog -
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   32.972000] random: nonblocking pool is initialized
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   34.428000] SCSI subsystem initialized
Mon Nov 23 23:40:21 2015 kern.info kernel: [   34.436000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Nov 23 23:40:21 2015 kern.info kernel: [   34.444000] ehci-platform: EHCI generic platform driver
Mon Nov 23 23:40:21 2015 kern.info kernel: [   34.452000] dwc2 1e101000.ifxhcd: requested GPIO 489
Mon Nov 23 23:40:21 2015 kern.info kernel: [   35.316000] dwc2 1e101000.ifxhcd: DWC OTG Controller
Mon Nov 23 23:40:21 2015 kern.info kernel: [   35.316000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Mon Nov 23 23:40:21 2015 kern.info kernel: [   35.324000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Mon Nov 23 23:40:21 2015 kern.err kernel: [   35.332000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Mon Nov 23 23:40:21 2015 kern.err kernel: [   35.332000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Mon Nov 23 23:40:21 2015 kern.info kernel: [   35.344000] hub 1-0:1.0: USB hub found
Mon Nov 23 23:40:21 2015 kern.info kernel: [   35.348000] hub 1-0:1.0: 1 port detected
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.212000] dwc2 1e106000.ifxhcd: DWC OTG Controller
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.212000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.220000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Mon Nov 23 23:40:21 2015 kern.err kernel: [   36.228000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Mon Nov 23 23:40:21 2015 kern.err kernel: [   36.228000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.240000] hub 2-0:1.0: USB hub found
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.244000] hub 2-0:1.0: 1 port detected
Mon Nov 23 23:40:21 2015 kern.info kernel: [   36.252000] usbcore: registered new interface driver usb-storage
Mon Nov 23 23:40:21 2015 user.info kernel: [   36.444000] init: - preinit -
Mon Nov 23 23:40:21 2015 user.info kernel: [   40.200000] mount_root: loading kmods from internal overlay
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   47.516000] jffs2: notice: (312) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Nov 23 23:40:21 2015 user.info kernel: [   47.536000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Nov 23 23:40:21 2015 user.info kernel: [   47.604000] block: extroot: not configured
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   48.964000] jffs2: notice: (309) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Nov 23 23:40:21 2015 user.info kernel: [   54.900000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Nov 23 23:40:21 2015 user.info kernel: [   54.948000] block: extroot: not configured
Mon Nov 23 23:40:21 2015 user.info kernel: [   54.956000] mount_root: switching to jffs2 overlay
Mon Nov 23 23:40:21 2015 user.info kernel: [   54.996000] procd: - early -
Mon Nov 23 23:40:21 2015 user.info kernel: [   54.996000] procd: - watchdog -
Mon Nov 23 23:40:21 2015 user.info kernel: [   55.824000] procd: - ubus -
Mon Nov 23 23:40:21 2015 user.info kernel: [   56.832000] procd: - init -
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.740000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.740000]

Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.752000] NET: Registered protocol family 8
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.756000] NET: Registered protocol family 20
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.776000] PPP generic driver version 2.4.2
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.788000] MEI CPE Driver, Version 1.2.0
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.788000]

Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.792000] (c) Copyright 2009, Infineon Technologies AG
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.792000]
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.800000]

Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.800000]
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.800000] Lantiq CPE API Driver version: DSL CPE API V4.11.4
Mon Nov 23 23:40:21 2015 kern.warn kernel: [   57.816000]
Mon Nov 23 23:40:21 2015 kern.warn kernel: [   57.816000] Predefined debug level: 2
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.824000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.832000] Backport generated by backports.git backports-20150129-0-gdd4a670
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.840000] Infineon Technologies DEU driver version 2.0.0
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.848000] IFX DEU DES initialized (multiblock).
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.852000] IFX DEU AES initialized (multiblock).
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.856000] IFX DEU ARC4 initialized (multiblock).
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.860000] IFX DEU SHA1 initialized.
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.864000] IFX DEU MD5 initialized.
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.868000] IFX DEU SHA1_HMAC initialized.
Mon Nov 23 23:40:21 2015 kern.notice kernel: [   57.872000] IFX DEU MD5_HMAC initialized.
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.884000] nf_conntrack version 0.5.0 (936 buckets, 3744 max)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.908000] NET: Registered protocol family 24
Mon Nov 23 23:40:21 2015 kern.info kernel: [   57.932000] xt_time: kernel timezone is -0000
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.076000] cfg80211: Calling CRDA to update world regulatory domain
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.084000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.092000] cfg80211: World regulatory domain updated:
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.092000] cfg80211:  DFS Master region: unset
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.100000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.108000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.116000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.124000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.132000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.140000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.148000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.156000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Nov 23 23:40:21 2015 kern.info kernel: [   58.164000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Mon Nov 23 23:40:27 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Mon Nov 23 23:40:33 2015 kern.info kernel: [   75.396000] device eth0.1 entered promiscuous mode
Mon Nov 23 23:40:33 2015 kern.info kernel: [   75.400000] device eth0 entered promiscuous mode
Mon Nov 23 23:40:33 2015 kern.info kernel: [   75.428000] br-lan: port 1(eth0.1) entered forwarding state
Mon Nov 23 23:40:33 2015 kern.info kernel: [   75.432000] br-lan: port 1(eth0.1) entered forwarding state
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'lan' is enabled
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'lan' is setting up now
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'lan' is now up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'loopback' is enabled
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'loopback' is now up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Network device 'eth0' link is up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Network device 'lo' link is up
Mon Nov 23 23:40:33 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Nov 23 23:40:34 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Nov 23 23:40:34 2015 daemon.err block: /dev/mtdblock3 is already mounted
Mon Nov 23 23:40:35 2015 kern.info kernel: [   76.764000] PTM 1.0.27    PTM (E1) firmware version 0.30
Mon Nov 23 23:40:35 2015 kern.warn kernel: [   76.768000] ifxmips_ptm: PTM init succeed
Mon Nov 23 23:40:35 2015 kern.info kernel: [   77.436000] br-lan: port 1(eth0.1) entered forwarding state
Mon Nov 23 23:40:37 2015 cron.info crond[867]: crond (busybox 1.23.2) started, log level 5
Mon Nov 23 23:40:38 2015 daemon.notice netifd: Interface 'wan' is enabled
Mon Nov 23 23:40:38 2015 daemon.notice netifd: Network device 'nas0' link is up
Mon Nov 23 23:40:38 2015 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Nov 23 23:40:38 2015 local2.notice br2684ctl[833]: Interface "nas0" created sucessfully
Mon Nov 23 23:40:38 2015 local2.notice br2684ctl[833]: Communicating over ATM 0.1.32, encapsulation: LLC
Mon Nov 23 23:40:38 2015 daemon.notice netifd: Interface 'wan' is setting up now
Mon Nov 23 23:40:38 2015 local2.err br2684ctl[833]: Fatal: failed to connect on socket; No such device
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: started, version 2.73 cachesize 150
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: DNS service limited to local subnets
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq-dhcp[930]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: using local addresses only for domain lan
Mon Nov 23 23:40:41 2015 daemon.warn dnsmasq[930]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: read /etc/hosts - 1 addresses
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq[930]: read /tmp/hosts/dhcp - 1 addresses
Mon Nov 23 23:40:41 2015 daemon.info dnsmasq-dhcp[930]: read /etc/ethers - 0 addresses
Mon Nov 23 23:40:46 2015 daemon.info pppd[906]: Plugin rp-pppoe.so loaded.
Mon Nov 23 23:40:46 2015 daemon.info pppd[906]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Mon Nov 23 23:40:46 2015 daemon.notice pppd[906]: pppd 2.4.7 started by root, uid 0
Mon Nov 23 23:40:50 2015 authpriv.info dropbear[899]: Not backgrounding
Mon Nov 23 23:40:51 2015 user.emerg syslog: setting up led usb
Mon Nov 23 23:40:51 2015 user.emerg syslog: setting up led usb2
Mon Nov 23 23:40:51 2015 user.emerg syslog: setting up led internet
Mon Nov 23 23:40:51 2015 user.emerg syslog: setting up led dsl
Mon Nov 23 23:40:51 2015 user.emerg syslog: setting up led wps
Mon Nov 23 23:40:51 2015 authpriv.info dropbear[1024]: Child connection from 192.168.1.111:34059
Mon Nov 23 23:40:51 2015 daemon.info procd: - init complete -
Mon Nov 23 23:40:52 2015 authpriv.info dropbear[1036]: Child connection from 192.168.1.111:34063
Mon Nov 23 23:40:58 2015 authpriv.notice dropbear[1036]: Password auth succeeded for 'root' from 192.168.1.111:34063
Mon Nov 23 23:41:01 2015 authpriv.notice dropbear[1024]: Password auth succeeded for 'root' from 192.168.1.111:34059
Mon Nov 23 23:41:01 2015 daemon.warn pppd[906]: Timeout waiting for PADO packets
Mon Nov 23 23:41:01 2015 daemon.err pppd[906]: Unable to complete PPPoE Discovery
Mon Nov 23 23:41:01 2015 daemon.info pppd[906]: Exit.
Mon Nov 23 23:41:01 2015 daemon.notice netifd: Interface 'wan' is now down
Mon Nov 23 23:41:01 2015 daemon.notice netifd: Interface 'wan' is disabled
Mon Nov 23 23:41:01 2015 daemon.notice netifd: Interface 'wan' is enabled
Mon Nov 23 23:41:01 2015 daemon.notice netifd: Interface 'wan' is setting up now
Mon Nov 23 23:41:01 2015 daemon.info pppd[1195]: Plugin rp-pppoe.so loaded.
Mon Nov 23 23:41:01 2015 daemon.info pppd[1195]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Mon Nov 23 23:41:01 2015 daemon.notice pppd[1195]: pppd 2.4.7 started by root, uid 0


Hmm a z trunka który obraz?

Idź do forum: Oprogramowanie / Software

20 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Poszło przez  sysupgrade byłem szybszy... ale Wifi się nie podnosi...

Idź do forum: Oprogramowanie / Software

21 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Ok biorę się za testy;)
Dam znać...

Idź do forum: Oprogramowanie / Software

22 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Tak, mam;)
Pierwszy jego raz musiał być zaliczony kabelkiem...

Idź do forum: Oprogramowanie / Software

23 Odpowiedź przez pd79

(63 odpowiedzi, napisanych Oprogramowanie / Software)

Witam Cezary,
Czy dało by się skompilować obraz pod 8980 po ostatnich zmianach?
https://dev.openwrt.org/changeset/47130
Generalnie ostatni firmware od 8970 działa bez zastrzeżeń nawet usb. Hmm tylko brak WiFi, nie chodzi tu 5 GHz a przynajmniej o 2,4.
Mam akurat od kolegi ten router na "stole" i można by go ucywilizować.
Pozdrawiam serdecznie i z góry dziękuję za odpowiedź.
p

PS jeszcze cos takiego znalazłem
https://lists.openwrt.org/pipermail/ope … 28131.html

Idź do forum: Oprogramowanie / Software