Przy próbie logowania do do routera przez putty po podaniu loginu i hasła dostaje taki komunikat "Server refused to allocate pty"
i zrywa polaczenie  jak to obejść?

Poprawiłem i teraz mam tak i dalej bez zmian, łacze się z Tplinkiem i w przegladarce wpisuje adres http://192.168.0.1:8080 i mam brak strony domoticza.

/etc/config$ netstat -apn | grep 8080
netstat: /proc/net/tcp6: No such file or directory
netstat: /proc/net/udp6: No such file or directory
netstat: /proc/net/raw6: No such file or directory
tcp        0      0 0.0.0.0:8080            0.0.0.0:*               LISTEN      3076/domoticz
/etc/config$ iptables -v -L | grep 8080
    0     0 ACCEPT     tcp  --  any    any     anywhere             anywhere             tcp dpt:8080 /* domot */

Czy słucha na tym porcie domoticz to niewiem ,jak to sprawdzić ? W sieci tworzonej przez Gargoyle loguje się do domoticza na tym porcie 8080.

Zmieniłem lan na 192.168.1.1 .Przekierowanie w Tplinku to ma być na WAN gargoyle 192.168.0.100 i port 8080  ?Czy coś jeszcze trzeba zrobić?

teraz mam tak

root@Gargoyle:~# opkg install libusb-compat_0.1.4-1_mvebu.ipk
Preparing to install the following packages, which will require 5459 bytes:
        libusb-compat

Preparing to install package libusb-compat...
        Successfully installed libusb-compat.
Installation of packages successful.

root@Gargoyle:~# mc
# ./domoticz
./domoticz: can't load library 'libudev.so.0'

A wiec skompilowałem openwrt.

w make menuconfig zaznaczyłem

<o> mosquitto.......... mosquitto - an MQTT message broker (with SSL support)            │ │ 
  │ │                   [o]   libwebsockets support                                                              │ │ 
  │ │                   [o]   Include mosquitto_passwd utility                                                   │ │ 
  │ │                   <o> mosquitto-client............. mosquitto - client tools (With SSL support)            │ │ 
  │ │                   <o> mosquitto-client-nossl.... mosquitto - client tools (Without SSL support)            │ │ 
  │ │                   <o> mosquitto-nossl. mosquitto - an MQTT message broker (without SSL support)   

a przy kompilacji domotycza dalej mam:

CMake Error at CMakeLists.txt:40 (message):
  Mosquitto includes or library cannot be found, and you ask to NOT use
  builtin

-- Configuring incomplete, errors occurred!
See also "/home/ja/chaos_calmer/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/CMakeFiles/CMakeOutput.log".
Makefile:100: recipe for target '/home/ja/chaos_calmer/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/.configured_yyyyyyyy' failed
make[2]: *** [/home/ja/chaos_calmer/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/.configured_yyyyyyyy] Error 1
make[2]: Leaving directory '/home/ja/chaos_calmer/package/domoticz'
package/Makefile:191: recipe for target 'package/domoticz/compile' failed
make[1]: *** [package/domoticz/compile] Error 2
make[1]: Leaving directory '/home/ja/chaos_calmer'
/home/ja/chaos_calmer/include/toplevel.mk:181: polecenia dla obiektu 'package/domoticz/compile' nie powiodły się
make: *** [package/domoticz/compile] Błąd 2

chyba dalej coś zle robie

-gcc-ranlib" -DCMAKE_FIND_ROOT_PATH="/home/ja/gargoyle/mvebu-src/staging_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi;/home/ja/gargoyle/mvebu-src/staging_dir/toolchain-arm_cortex-a9+vfpv3_gcc-4.8-linaro_uClibc-0.9.33.2_eabi" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=BOTH -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY -DCMAKE_STRIP=: -DCMAKE_INSTALL_PREFIX=/usr -DDL_LIBRARY=/home/ja/gargoyle/mvebu-src/staging_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi -DCMAKE_PREFIX_PATH=/home/ja/gargoyle/mvebu-src/staging_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi -DCMAKE_SKIP_RPATH=TRUE -DCMAKE_BUILD_TYPE=Release -DUSE_BUILTIN_MQTT=no -DUSE_BUILTIN_SQLITE=no -DUSE_STATIC_BOOST=no -DUSE_STATIC_LIBSTDCXX=no -DUSE_STATIC_OPENZWAVE=no -DUSE_PYTHON=no . )
-- The C compiler identification is GNU 4.8.3
-- The CXX compiler identification is GNU 4.8.3
-- Check for working C compiler: /home/ja/gargoyle/mvebu-src/staging_dir/toolchain-arm_cortex-a9+vfpv3_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-gcc
-- Check for working C compiler: /home/ja/gargoyle/mvebu-src/staging_dir/toolchain-arm_cortex-a9+vfpv3_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /home/ja/gargoyle/mvebu-src/staging_dir/toolchain-arm_cortex-a9+vfpv3_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-g++
-- Check for working CXX compiler: /home/ja/gargoyle/mvebu-src/staging_dir/toolchain-arm_cortex-a9+vfpv3_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
CMake Error at CMakeLists.txt:40 (message):
  Mosquitto includes or library cannot be found, and you ask to NOT use
  builtin

-- Configuring incomplete, errors occurred!
See also "/home/ja/gargoyle/mvebu-src/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/CMakeFiles/CMakeOutput.log".
Makefile:100: recipe for target '/home/ja/gargoyle/mvebu-src/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/.configured_yyy' failed
make[2]: *** [/home/ja/gargoyle/mvebu-src/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/domoticz-3.5877/.configured_yyy] Error 1
make[2]: Leaving directory '/home/ja/gargoyle/mvebu-src/package/domoticz'
package/Makefile:193: recipe for target 'package/domoticz/compile' failed
make[1]: *** [package/domoticz/compile] Error 2
make[1]: Leaving directory '/home/ja/gargoyle/mvebu-src'
/home/ja/gargoyle/mvebu-src/include/toplevel.mk:181: polecenia dla obiektu 'package/domoticz/compile' nie powiodły się
make: *** [package/domoticz/compile] Błąd 2

Dalej coś źle robię:

Applying ./patches/001-unix-fix-compilation-against-musl-libc-1127.patch using plaintext:
patching file cpp/src/platform/unix/SerialControllerImpl.cpp
Hunk #1 FAILED at 25.
1 out of 1 hunk FAILED -- saving rejects to file cpp/src/platform/unix/SerialControllerImpl.cpp.rej
Patch failed!  Please fix ./patches/001-unix-fix-compilation-against-musl-libc-1127.patch!
Makefile:93: recipe for target '/home/ja/gargoyle/mvebu-src/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/openzwave-1.4.2426/.prepared_2397131d3de3a9e9e3cae2542a50e9d6' failed
make[2]: *** [/home/ja/gargoyle/mvebu-src/build_dir/target-arm_cortex-a9+vfpv3_uClibc-0.9.33.2_eabi/openzwave-1.4.2426/.prepared_2397131d3de3a9e9e3cae2542a50e9d6] Error 1
make[2]: Leaving directory '/home/ja/gargoyle/mvebu-src/package/openzwave'
package/Makefile:193: recipe for target 'package/openzwave/compile' failed
make[1]: *** [package/openzwave/compile] Error 2
make[1]: Leaving directory '/home/ja/gargoyle/mvebu-src'
/home/ja/gargoyle/mvebu-src/include/toplevel.mk:181: polecenia dla obiektu 'package/domoticz/compile' nie powiodły się
make: *** [package/domoticz/compile] Błąd 2

Zaczynam watpić że mi sie uda to skompilować.

Dzieki za pomoc jestem kroczek dalej ale dalej jest problem - nie może pobrać pliku -jak pchnać ta kompilacje dalej

/home/ja/gargoyle/mvebu-src/scripts/download.pl "/home/ja/gargoyle/mvebu-src/dl" "openzwave-1.4.2279.tar.gz" "unknown" "" "http://old.openzwave.com/snapshots"
--2017-02-24 18:20:35--  http://old.openzwave.com/snapshots/open … 279.tar.gz
Resolving old.openzwave.com (old.openzwave.com)... 184.106.179.216
Connecting to old.openzwave.com (old.openzwave.com)|184.106.179.216|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-02-24 18:20:35 ERROR 404: Not Found.

Download failed.
--2017-02-24 18:20:35--  http://mirror2.openwrt.org/sources/open … 279.tar.gz
Resolving mirror2.openwrt.org (mirror2.openwrt.org)... 46.4.11.11
Connecting to mirror2.openwrt.org (mirror2.openwrt.org)|46.4.11.11|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-02-24 18:20:36 ERROR 404: Not Found.

Download failed.
--2017-02-24 18:20:36--  http://downloads.openwrt.org/sources/op … 279.tar.gz
Resolving downloads.openwrt.org (downloads.openwrt.org)... 78.24.191.177
Connecting to downloads.openwrt.org (downloads.openwrt.org)|78.24.191.177|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-02-24 18:20:36 ERROR 404: Not Found.

Download failed.
No more mirrors to try - giving up.
Makefile:46: recipe for target '/home/ja/gargoyle/mvebu-src/dl/openzwave-1.4.2279.tar.gz' failed
make[2]: *** [/home/ja/gargoyle/mvebu-src/dl/openzwave-1.4.2279.tar.gz] Error 2
make[2]: Leaving directory '/home/ja/gargoyle/mvebu-src/package/openzwave'
package/Makefile:193: recipe for target 'package/openzwave/compile' failed
make[1]: *** [package/openzwave/compile] Error 2
make[1]: Leaving directory '/home/ja/gargoyle/mvebu-src'
/home/ja/gargoyle/mvebu-src/include/toplevel.mk:181: polecenia dla obiektu 'package/domoticz/compile' nie powiodły się
make: *** [package/domoticz/compile] Błąd 2

Panowie potrzebuje pomocy bo mam problem z komplacja  Domoticza na platforme mvebu.przy kompilacji dostaje coś takiego:

~/gargoyle $ make -j1 V=s /gargoyle/mvebu-src/package/domoticz/compile
( \
    target=`echo /gargoyle/mvebu-src/package/domoticz/compile  | sed 's/\..*$//'` ; \
    profile=`echo /gargoyle/mvebu-src/package/domoticz/compile | sed 's/^.*\.//'`  ; \
    have_profile=`echo /gargoyle/mvebu-src/package/domoticz/compile | grep "\."`  ; \
    if [ -z "$have_profile" ] ; then profile="" ; fi ; \
    if [ ! -d "targets/${target}" ] ; then echo "ERROR: Specified Target Does Not Exist" ; exit ; fi ; \
    if [ -n "$profile" ] && [ ! -d "targets/${target}/profiles/${profile}" ] ; then echo "ERROR: Specified Target Profile Does Not Exist" ; exit ; fi ; \
    if [ -d "Distribution" ] ; then rm -rf "Distribution" ; fi ;\
    if [ ! -d "${target}-src" ] || [ "false" = "1" -o "false" = "true" -o "false" = "TRUE" ] ; then \
        bash build.sh "$target" "1.9.X (Built 20170221-1555 git@e015765)" "s" "ar71xx" "ar71xx" "true" "true" "$profile" "internationalize" "English-EN" "English-EN" "auto" "false"; \
    else \
        bash rebuild.sh "$target" "1.9.X (Built 20170221-1555 git@e015765)" "s" "true" "true" "$profile" "internationalize" "English-EN" "English-EN" "auto" "false"; \
    fi ; \
)
ERROR: Specified Target Does Not Exist