Po zaktualizowaniu do 19.07 brak Sieci bezprzewodowych w ustawieniach Luci. Brak również pliku wireless w /etc/config
Log po pierwszym uruchomieniu:

Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.000000] Linux version 4.14.133 (cezary@eko.one.pl) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10196-c4e727f01c)) #0 Thu Jul 25 17:40:57 2019
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] MIPS: machine is TP-Link TL-WR1043ND v1
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] SoC: Atheros AR9132 rev 2
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Jul 25 19:41:06 2019 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Jul 25 19:41:06 2019 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Zone ranges:
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Early memory node ranges
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804f3f00, node_mem_map 81005be0
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x804f7740 with crng_init=0
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] Memory: 58408K/65536K available (3998K kernel code, 161K rwdata, 532K rodata, 1188K init, 211K bss, 7128K reserved, 0K cma-reserved)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] NR_IRQS: 51
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] CPU clock: 400.000 MHz
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.007906] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.094147] pid_max: default: 32768 minimum: 301
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.099047] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.105653] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.117805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.127672] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.133860] pinctrl core: initialized pinctrl subsystem
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.141922] NET: Registered protocol family 16
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.171581] clocksource: Switched to clocksource MIPS
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.177929] NET: Registered protocol family 2
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.183556] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.190527] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.196944] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.203502] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.209347] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.215957] NET: Registered protocol family 1
Thu Jul 25 19:41:06 2019 kern.debug kernel: [    0.220334] PCI: CLS 0 bytes, default 32
Thu Jul 25 19:41:06 2019 kern.warn kernel: [    0.224919] Crashlog allocated RAM at address 0x3f00000
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.231739] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.245561] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.251378] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.272463] io scheduler noop registered
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.276383] io scheduler deadline registered (default)
Thu Jul 25 19:41:06 2019 kern.err kernel: [    0.281986] ar7200-usb-phy usb-phy: phy reset is missing
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.288385] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.298114] console [ttyS0] disabled
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.301794] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 12500000) is a 8250
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.310315] console [ttyS0] enabled
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.317349] bootconsole [early0] disabled
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.346260] m25p80 spi0.0: w25q128 (16384 Kbytes)
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.351049] 3 fixed-partitions partitions found on MTD device spi0.0
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.357469] Creating 3 MTD partitions on "spi0.0":
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.362323] 0x000000000000-0x000000020000 : "u-boot"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.368398] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.374879] 2 tplink-fw partitions found on MTD device firmware
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.380841] Creating 2 MTD partitions on "firmware":
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.385906] 0x000000000000-0x0000001859ef : "kernel"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.391972] 0x0000001859f0-0x0000007d0000 : "rootfs"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.397898] mtd: device 3 (rootfs) set to be root filesystem
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.403688] 1 squashfs-split partitions found on MTD device rootfs
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.409918] 0x0000006d0000-0x0000007d0000 : "rootfs_data"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.416352] 0x0000007f0000-0x000000800000 : "art"
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    0.422918] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Jul 25 19:41:06 2019 kern.err kernel: [    0.429206] rtl8366rb rtl8366rb: cannot find mdio node phandle
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.551599] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.558342] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.798910] libphy: rtl8366rb: probed
Thu Jul 25 19:41:06 2019 kern.info kernel: [    0.803568] libphy: Fixed MDIO Bus: probed
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.143442] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.153338] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.162635] NET: Registered protocol family 10
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.173367] Segment Routing with IPv6
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.177183] NET: Registered protocol family 17
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.181785] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.194833] 8021q: 802.1Q VLAN Support v1.8
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.201793] hctosys: unable to open rtc device (rtc0)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.211758] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Thu Jul 25 19:41:06 2019 kern.info kernel: [    1.226147] Freeing unused kernel memory: 1188K
Thu Jul 25 19:41:06 2019 kern.warn kernel: [    1.230707] This architecture does not have kernel memory protection.
Thu Jul 25 19:41:06 2019 user.info kernel: [    2.113304] init: Console is alive
Thu Jul 25 19:41:06 2019 user.info kernel: [    2.117004] init: - watchdog -
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    2.501593] random: fast init done
Thu Jul 25 19:41:06 2019 user.info kernel: [    4.432617] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.714828] usbcore: registered new interface driver usbfs
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.720445] usbcore: registered new interface driver hub
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.726000] usbcore: registered new device driver usb
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.770974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    4.788206] SCSI subsystem initialized
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.797987] ehci-platform: EHCI generic platform driver
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.803598] ehci-platform 1b000100.usb: EHCI Host Controller
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.809328] ehci-platform 1b000100.usb: new USB bus registered, assigned bus number 1
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.817393] ehci-platform 1b000100.usb: irq 3, io mem 0x1b000100
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.851607] ehci-platform 1b000100.usb: USB 2.0 started, EHCI 1.00
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.858931] hub 1-0:1.0: USB hub found
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.863207] hub 1-0:1.0: 1 port detected
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.872833] usbcore: registered new interface driver usb-storage
Thu Jul 25 19:41:06 2019 kern.info kernel: [    4.881776] usbcore: registered new interface driver uas
Thu Jul 25 19:41:06 2019 user.info kernel: [    4.887891] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jul 25 19:41:06 2019 user.info kernel: [    4.905768] init: - preinit -
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    6.254463] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    6.470242] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    6.762765] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    8.246820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Jul 25 19:41:06 2019 kern.info kernel: [    8.252868] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Thu Jul 25 19:41:06 2019 kern.warn kernel: [    8.338170] urandom_read: 4 callbacks suppressed
Thu Jul 25 19:41:06 2019 kern.notice kernel: [    8.338182] random: procd: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    9.291952] eth0: link up (1000Mbps/Full duplex)
Thu Jul 25 19:41:06 2019 kern.info kernel: [    9.296640] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jul 25 19:41:06 2019 kern.info kernel: [    9.303562] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Thu Jul 25 19:41:06 2019 user.info kernel: [   11.655464] mount_root: loading kmods from internal overlay
Thu Jul 25 19:41:06 2019 user.info kernel: [   11.724745] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Jul 25 19:41:06 2019 user.info kernel: [   11.733318] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Jul 25 19:41:06 2019 user.info kernel: [   11.974131] block: attempting to load /etc/config/fstab
Thu Jul 25 19:41:06 2019 user.err kernel: [   11.979671] block: unable to load configuration (fstab: Entry not found)
Thu Jul 25 19:41:06 2019 user.err kernel: [   11.986674] block: no usable configuration
Thu Jul 25 19:41:06 2019 user.notice kernel: [   11.991790] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Thu Jul 25 19:41:06 2019 user.warn kernel: [   12.053655] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Jul 25 19:41:06 2019 kern.info kernel: [   12.211652] eth0: link down
Thu Jul 25 19:41:06 2019 user.info kernel: [   12.237884] procd: - early -
Thu Jul 25 19:41:06 2019 user.info kernel: [   12.240921] procd: - watchdog -
Thu Jul 25 19:41:06 2019 user.info kernel: [   13.261839] procd: - watchdog -
Thu Jul 25 19:41:06 2019 user.info kernel: [   13.265333] procd: - ubus -
Thu Jul 25 19:41:06 2019 kern.notice kernel: [   13.392300] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 kern.notice kernel: [   13.608942] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jul 25 19:41:06 2019 user.info kernel: [   13.785038] procd: - init -
Thu Jul 25 19:41:06 2019 user.info kernel: [   15.140617] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.214161] tun: Universal TUN/TAP device driver, 1.6
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.260499] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.313713] fuse init (API version 7.26)
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.349470] usbcore: registered new interface driver cdc_acm
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.355244] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.413371] usbcore: registered new interface driver cdc_wdm
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.433229] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.440847] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.493730] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jul 25 19:41:06 2019 kern.info kernel: [   15.524974] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Thu Jul 25 19:41:06 2019 user.info kernel: [   15.608252] urngd: v1.0.0 started.
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.004698] usbcore: registered new interface driver usblp
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.057292] usbcore: registered new interface driver usbserial
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.063371] usbcore: registered new interface driver usbserial_generic
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.070026] usbserial: USB Serial support registered for generic
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.140018] wireguard: WireGuard 0.0.20190601 loaded. See [url=http://www.wireguard.com]www.wireguard.com[/url] for information.
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.148578] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.262694] xt_time: kernel timezone is -0000
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.284274] usbcore: registered new interface driver cdc_ether
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.305953] usbcore: registered new interface driver cdc_ncm
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.532974] usbcore: registered new interface driver huawei_cdc_ncm
Thu Jul 25 19:41:06 2019 kern.notice kernel: [   16.625233] random: crng init done
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.677631] PPP generic driver version 2.4.2
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.703102] NET: Registered protocol family 24
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.711287] usbcore: registered new interface driver qmi_wwan
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.734681] usbcore: registered new interface driver rndis_host
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.749600] usbcore: registered new interface driver sierra
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.755403] usbserial: USB Serial support registered for Sierra USB modem
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.784179] usbcore: registered new interface driver sierra_net
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.867015] usbcore: registered new interface driver cdc_mbim
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.893979] usbcore: registered new interface driver option
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.899684] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.929506] usbcore: registered new interface driver qcserial
Thu Jul 25 19:41:06 2019 kern.info kernel: [   16.935503] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Jul 25 19:41:06 2019 kern.err kernel: [   17.040517] ath: phy0: Bad EEPROM checksum 0x0
Thu Jul 25 19:41:06 2019 kern.err kernel: [   17.045021] ath: phy0: Unable to initialize hardware; initialization status: -22
Thu Jul 25 19:41:06 2019 kern.err kernel: [   17.052479] ath9k 180c0000.wmac: failed to initialize device
Thu Jul 25 19:41:06 2019 kern.warn kernel: [   17.058230] ath9k: probe of 180c0000.wmac failed with error -22
Thu Jul 25 19:41:06 2019 user.info kernel: [   17.162143] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jul 25 19:41:07 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Jul 25 19:41:07 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Jul 25 19:41:07 2019 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: started, version 2.80 cachesize 150
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: DNS service limited to local subnets
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain test
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain onion
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain localhost
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain local
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain invalid
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain bind
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: using local addresses only for domain lan
Thu Jul 25 19:41:08 2019 daemon.warn dnsmasq[1177]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:08 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jul 25 19:41:26 2019 authpriv.info dropbear[1214]: Not backgrounding
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: 8021ad
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: 8021q
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: macvlan
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: veth
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: bridge
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: Network device
Thu Jul 25 19:41:28 2019 user.notice : Added device handler type: tunnel
Thu Jul 25 19:41:32 2019 daemon.err block: /dev/mtdblock3 is already mounted on /rom
Thu Jul 25 19:41:33 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records in
Thu Jul 25 19:41:33 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records out
Thu Jul 25 19:41:36 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: Generating a RSA private key
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.529058] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.535401] eth0: link up (1000Mbps/Full duplex)
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.540075] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.572312] br-lan: port 1(eth0.1) entered blocking state
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.577758] br-lan: port 1(eth0.1) entered disabled state
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.583669] device eth0.1 entered promiscuous mode
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.588497] device eth0 entered promiscuous mode
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.736712] br-lan: port 1(eth0.1) entered blocking state
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.742207] br-lan: port 1(eth0.1) entered forwarding state
Thu Jul 25 19:41:40 2019 kern.info kernel: [   57.748061] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'lan' is enabled
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'lan' is now up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'loopback' is now up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan' is enabled
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jul 25 19:41:40 2019 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Network device 'eth0' link is up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Network device 'lo' link is up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jul 25 19:41:40 2019 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jul 25 19:41:40 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jul 25 19:41:41 2019 kern.info kernel: [   58.572222] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Jul 25 19:41:41 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jul 25 19:41:41 2019 daemon.notice netifd: wan (1479): udhcpc: started, v1.30.1
Thu Jul 25 19:41:41 2019 daemon.err odhcpd[1358]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Jul 25 19:41:42 2019 daemon.notice netifd: wan (1479): udhcpc: sending discover
Thu Jul 25 19:41:42 2019 daemon.notice netifd: wan (1479): udhcpc: sending select for 192.168.10.147
Thu Jul 25 19:41:42 2019 daemon.notice netifd: wan (1479): udhcpc: lease of 192.168.10.147 obtained, lease time 43200
Thu Jul 25 19:41:43 2019 daemon.notice netifd: Interface 'wan' is now up
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: reading /tmp/resolv.conf.auto
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain test
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain onion
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain localhost
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain local
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain invalid
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain bind
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using local addresses only for domain lan
Thu Jul 25 19:41:43 2019 daemon.info dnsmasq[1177]: using nameserver 192.168.10.1#53
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c.1484 - 0 addresses
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/odhcpd - 1 addresses
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jul 25 19:41:45 2019 daemon.notice netifd: Interface 'wan6' is now up
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: reading /tmp/resolv.conf.auto
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain test
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain onion
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain localhost
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain local
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain invalid
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain bind
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using local addresses only for domain lan
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using nameserver 192.168.10.1#53
Thu Jul 25 19:41:45 2019 daemon.info dnsmasq[1177]: using nameserver fd72:cc0c:d195::1#53
Thu Jul 25 19:41:46 2019 daemon.info dnsmasq[1177]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:46 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c.1484 - 0 addresses
Thu Jul 25 19:41:46 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/odhcpd - 1 addresses
Thu Jul 25 19:41:46 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jul 25 19:41:48 2019 daemon.info dnsmasq[1177]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:48 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c.1484 - 0 addresses
Thu Jul 25 19:41:48 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/odhcpd - 2 addresses
Thu Jul 25 19:41:48 2019 daemon.info dnsmasq[1177]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jul 25 19:41:48 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Thu Jul 25 19:41:50 2019 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1177]: exiting on receipt of SIGTERM
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: started, version 2.80 cachesize 150
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: DNS service limited to local subnets
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq-dhcp[1822]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain test
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain onion
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain localhost
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain local
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain invalid
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain bind
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain lan
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: reading /tmp/resolv.conf.auto
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain test
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain onion
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain localhost
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain local
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain invalid
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain bind
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using local addresses only for domain lan
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using nameserver 192.168.10.1#53
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: using nameserver fd72:cc0c:d195::1#53
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: read /tmp/hosts/odhcpd - 2 addresses
Thu Jul 25 19:41:50 2019 daemon.info dnsmasq[1822]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Jul 25 19:41:51 2019 daemon.info dnsmasq-dhcp[1822]: read /etc/ethers - 0 addresses
Thu Jul 25 19:41:51 2019 daemon.info dnsmasq[1822]: read /etc/hosts - 4 addresses
Thu Jul 25 19:41:51 2019 daemon.info dnsmasq[1822]: read /tmp/hosts/odhcpd - 2 addresses
Thu Jul 25 19:41:51 2019 daemon.info dnsmasq[1822]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Jul 25 19:41:51 2019 daemon.info dnsmasq-dhcp[1822]: read /etc/ethers - 0 addresses
Thu Jul 25 19:41:52 2019 user.notice ddns-scripts[1769]: myddns_ipv4: PID 1769 started at 2019-07-25 19:41
Thu Jul 25 19:41:53 2019 user.warn ddns-scripts[1769]: myddns_ipv4: Service section disabled! - TERMINATE
Thu Jul 25 19:41:54 2019 user.warn ddns-scripts[1769]: myddns_ipv4: PID 1769 exit WITH ERROR 1 at 2019-07-25 19:41
Thu Jul 25 19:41:55 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: .......................................+++++
Thu Jul 25 19:41:55 2019 user.notice ddns-scripts[1936]: myddns_ipv6: PID 1936 started at 2019-07-25 19:41
Thu Jul 25 19:41:56 2019 user.warn ddns-scripts[1936]: myddns_ipv6: Service section disabled! - TERMINATE
Thu Jul 25 19:41:56 2019 user.warn ddns-scripts[1936]: myddns_ipv6: PID 1936 exit WITH ERROR 1 at 2019-07-25 19:41
Thu Jul 25 19:41:56 2019 daemon.info dnsmasq[1822]: exiting on receipt of SIGTERM
Thu Jul 25 19:41:57 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Jul 25 19:41:57 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Jul 25 19:41:57 2019 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Thu Jul 25 19:42:00 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: ......................+++++
Thu Jul 25 19:42:00 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: writing new private key to '/etc/uhttpd.key.new'
Thu Jul 25 19:42:00 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: -----
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: started, version 2.80 cachesize 150
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: DNS service limited to local subnets
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq-dhcp[2317]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain test
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain onion
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain localhost
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain local
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain invalid
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain bind
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain lan
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: reading /tmp/resolv.conf.auto
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain test
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain onion
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain localhost
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain local
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain invalid
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain bind
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using local addresses only for domain lan
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using nameserver 192.168.10.1#53
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: using nameserver fd72:cc0c:d195::1#53
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: read /etc/hosts - 4 addresses
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: read /tmp/hosts/odhcpd - 2 addresses
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq[2317]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Jul 25 19:42:04 2019 daemon.info dnsmasq-dhcp[2317]: read /etc/ethers - 0 addresses
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Thu Jul 25 19:42:04 2019 user.info adblock-3.6.5-2[1933]: adblock is currently disabled, please set adb_enabled to '1' to use this service
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Thu Jul 25 19:42:04 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Thu Jul 25 19:42:05 2019 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Thu Jul 25 19:42:05 2019 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Jul 25 19:42:05 2019 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Jul 25 19:42:05 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Thu Jul 25 19:42:05 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Thu Jul 25 19:42:06 2019 daemon.info dnsmasq-dhcp[2317]: DHCPREQUEST(br-lan) 192.168.1.163 00:1e:33:e1:b6:b7
Thu Jul 25 19:42:06 2019 daemon.info dnsmasq-dhcp[2317]: DHCPACK(br-lan) 192.168.1.163 00:1e:33:e1:b6:b7 DESKTOP-BM5SUSB
Thu Jul 25 19:42:07 2019 kern.warn kernel: [   84.540069] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Thu Jul 25 19:42:07 2019 kern.warn kernel: [   84.549652] jffs2_build_filesystem(): unlocking the mtd device...
Thu Jul 25 19:42:07 2019 kern.warn kernel: [   84.549723] done.
Thu Jul 25 19:42:10 2019 kern.warn kernel: [   84.557957] jffs2_build_filesystem(): erasing all blocks after the end marker...
Thu Jul 25 19:42:10 2019 kern.warn kernel: [   87.569201] done.
Thu Jul 25 19:42:10 2019 kern.notice kernel: [   87.578744] jffs2: notice: (2468) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jul 25 19:42:11 2019 kern.warn kernel: [   88.345982] overlayfs: upper fs does not support tmpfile.
Thu Jul 25 19:42:11 2019 daemon.info mount_root: performing overlay whiteout
Thu Jul 25 19:42:11 2019 daemon.info mount_root: syncronizing overlay
Thu Jul 25 19:42:11 2019 daemon.err mount_root: failed to sync jffs2 overlay
Thu Jul 25 19:42:13 2019 daemon.info procd: - init complete -
Thu Jul 25 19:42:13 2019 daemon.info urandom_seed[2549]: Seed saved (/etc/urandom.seed)
Thu Aug 15 22:36:33 2019 authpriv.info dropbear[2589]: Child connection from 192.168.1.163:58667
Thu Aug 15 22:36:42 2019 authpriv.notice dropbear[2589]: Auth succeeded with blank password for 'root' from 192.168.1.163:58667

Przy okazji , właśnie chciałem zaktualizować wr1043nd v1 , i po wgraniu Twojego luci 19.07 nie ma Sieci bezprzewodowych...
Aktualizowałem bez zachowania konfiguracji. Co to się stanęło ?

78

(9 odpowiedzi, napisanych Oprogramowanie)

Tak ( wg Part A)
https://mybroadband.co.za/forum/threads … de.899034/

Tylko Firmware wziasc ten DNA.

No i trzeba pamietac ze standardowo haslo to tego FW to admin/1234

79

(9 odpowiedzi, napisanych Oprogramowanie)

Pewnie chodzi o to , żeby Tp-link dostał IP sieci ,a nie IP z B315....
Do tego trzeba mieć Firmware z Bridge Mode.  Pomysł stąd: http://www.bez-kabli.pl/viewtopic.php?t … 45#p577357
Właśnie to testuje i działa.

80

(8 odpowiedzi, napisanych Oprogramowanie)

Jak w tym nadajniku jest LTE na 2600MHz to na szybko możesz wygiąć dwie antenki biquad na ta czestotliwosc.
Sam mam takie tymczasowo na działce i działają zadziwiająco dobrze.Przy tym taka antena ma dość wąskie pasmo 'i częstotliwości 2100(na niej moze być UMTS) nie powinna złapać.

81

(177 odpowiedzi, napisanych Oprogramowanie)

Wszystko było ok. Okazało się ,że to kwestia przeglądarki , na Chrome nie działa ( mimo czyszczenia danych przeglądarki ) , a na Firefox działa...
Może ktoś wie o co chodzi , bo nie bede walczył z Chromem , muszę jak najszybciej zacząć monitorować temperaturę w nieogrzewanym jeszcze domu.

82

(177 odpowiedzi, napisanych Oprogramowanie)

Dzięki.
Niestety dalej strony www nie widać mimo ,że start wygląda na ok:

root@OpenWrt:~# domoticz
2018-11-17 08:19:09.208  Status: Domoticz V4.9700 (c)2012-2018 GizMoCuz
2018-11-17 08:19:09.209  Status: Build Hash: b97777b, Date: 2018-06-23 16:18:06
2018-11-17 08:19:09.211  Status: Startup Path: /usr/bin/
2018-11-17 08:19:09.988  Status: PluginSystem: Started, Python version '3.6.5'.
2018-11-17 08:19:10.035  Active notification Subsystems: gcm, http (2/13)
2018-11-17 08:19:10.038  Status: WebServer(HTTP) started on address: :: with port 8080
2018-11-17 08:19:10.056  Error: [web:443] missing SSL certificate chain file ./server_cert.pem!
2018-11-17 08:19:10.058  Error: [web:443] missing SSL certificate file ./server_cert.pem!
2018-11-17 08:19:10.059  Error: [web:443] missing SSL private key file ./server_cert.pem!
2018-11-17 08:19:10.061  Error: [web:443] missing SSL DH parameters file ./server_cert.pem!
2018-11-17 08:19:10.063  Status: WebServer(SSL) started on address: :: with port 443
2018-11-17 08:19:10.072  Status: Proxymanager started.
2018-11-17 08:19:10.082  Starting shared server on: :::6144
2018-11-17 08:19:10.085  Status: RxQueue: queue worker started...
2018-11-17 08:19:10.087  Status: TCPServer: shared server started...
2018-11-17 08:19:12.090  Status: EventSystem: reset all events...
2018-11-17 08:19:12.094  Status: EventSystem: reset all device statuses...
2018-11-17 08:19:12.376  Status: PluginSystem: Entering work loop.
2018-11-17 08:19:12.634  Status: Python EventSystem: Initalizing event module.
2018-11-17 08:19:12.638  Status: EventSystem: Queue thread started...
2018-11-17 08:19:12.640  Status: EventSystem: Started

Nawet po zabiciu procesu i uruchomieniu z parametrem np -www 9050 też się uruchamia ,ale natym porcie również strona się nie wyświetla....

83

(177 odpowiedzi, napisanych Oprogramowanie)

A dlaczego u mnie strony nie widać ?

2018-11-16 23:20:24.871  Status: Domoticz V4.9700 (c)2012-2018 GizMoCuz
2018-11-16 23:20:24.872  Status: Build Hash: b97777b, Date: 2018-06-23 16:18:06
2018-11-16 23:20:24.875  Status: Startup Path: /usr/bin/
2018-11-16 23:20:25.039  Status: PluginSystem: Failed dynamic library load, install the latest libpython3.x library that is available for your platform.
2018-11-16 23:20:25.087  Active notification Subsystems: gcm, http (2/13)
2018-11-16 23:20:25.090  Status: WebServer(HTTP) started on address: :: with port 8080
2018-11-16 23:20:25.107  Error: [web:443] missing SSL certificate chain file ./server_cert.pem!
2018-11-16 23:20:25.109  Error: [web:443] missing SSL certificate file ./server_cert.pem!
2018-11-16 23:20:25.110  Error: [web:443] missing SSL private key file ./server_cert.pem!
2018-11-16 23:20:25.112  Error: [web:443] missing SSL DH parameters file ./server_cert.pem!
2018-11-16 23:20:25.115  Status: WebServer(SSL) started on address: :: with port 443
2018-11-16 23:20:25.124  Status: Proxymanager started.
2018-11-16 23:20:25.130  Starting shared server on: :::6144
2018-11-16 23:20:25.137  Status: RxQueue: queue worker started...
2018-11-16 23:20:25.139  Status: TCPServer: shared server started...
2018-11-16 23:20:27.148  Status: EventSystem: reset all events...
2018-11-16 23:20:27.152  Status: EventSystem: reset all device statuses...
2018-11-16 23:20:27.156  Status: EventSystem - Python: Failed dynamic library load, install the latest libpython3.x library that is available for your platform.
2018-11-16 23:20:27.159  Status: EventSystem: Queue thread started...
2018-11-16 23:20:27.161  Status: EventSystem: Started

Co trzeba doinstalować ,żeby zniknęło " install the latest libpython3.x"...
Platforma to OpenWrt 18.06-SNAPSHOT, r7355-47f68ca586 ,najnowsza od Cezarego.

84

(24 odpowiedzi, napisanych Termometr)

Podłączenie kondensatora pomiędzy Vdd i GND zwiększy pojemność lini danych ? W trybie pasożytniczym na pewno , ale nie przy trzech osobnych przewodach.

85

(24 odpowiedzi, napisanych Termometr)

Niektorzy zalecaja przy kazdym czujniku do filtrowania napiecia przylutowac do nozek GND i Vdd  czujnika kondensator ceramiczny 100nF, a i jeszcze dodatkowo elektrolit 100uF tez nie zaszkodzi.

86

(11 odpowiedzi, napisanych Termometr)

No aż tyle to nie będzie smile

87

(11 odpowiedzi, napisanych Termometr)

No właśnie nic takiego nie mogę wymyśleć z dokumentacji takiego standardowego DS2490...

88

(11 odpowiedzi, napisanych Termometr)

No tak ,ale będę miał dostęp i łatwo będzie go naprawić.


Chodzi mi raczej ,czy nie będzie problemów z czasem odczytu.
Planuję zrobić takie coś na Domoticzu zainstalowanym na RaspberryPi , odczyt wszystkich temperatur przez konwerter USB ,a wykonywanie(sterowanie zaworami) na płytce z 16 przekaźnikami.

89

(11 odpowiedzi, napisanych Termometr)

Kable z czujników byłyby raczej osobno to każdego czujnika , lub max 2 na jednym drucie ,dopiero do urządzenia podpięte byłoby do jednej linii.

90

(11 odpowiedzi, napisanych Termometr)

Mam dom w stanie surowym i zastanawiam się nad oczujnikowaniem ,głównie do sterowania zaworami w podłogówce.
W sumie byłoby tych czujników ok 50szt. Pytanie czy jest szansa ,aby pomiary działały na jednej linii z taką ilością czujników ?
Czy może coś innego ?

91

(51 odpowiedzi, napisanych Oprogramowanie)

Mam takie urządzenie , które aby sie połączyć z wifi ,potrzebuje w pliku konfiguracyjnym mieć wpisane SSID , hasło i również wygenerowane na tej podstawie PMK , inaczej sie nie połączy.

92

(51 odpowiedzi, napisanych Oprogramowanie)

Niestety żaden z wygenerowanych w ten sposób PMK nie jest poprawny. Kopiowałem i wklejałem na Windows 10 i na linuxie .
To urządzenie do podłączenia się do siedzi wymaga wpisania właśnie tego PMK i do sieci bez szyfrowania się podłącza , stąd wniosek ,że na pewno ten PMK jest niepoprawnie wygenerowany.
Może ktoś zna jakiś sposób ,żeby na już podłączonym do sieci urządzeniu podejrzeć ten PMK ?

93

(51 odpowiedzi, napisanych Oprogramowanie)

Wyświetla się jako emoji , tak samo jak w windowsie , ale po wygenerowaniu i wpisaniu w konfigurację urządzenie się nie łączy.
Najlepiej jakby w już podłączonym urządzeniu działo się wyświetlić ten 256bitowy Pairwise Master Key...

94

(51 odpowiedzi, napisanych Oprogramowanie)

A jak SSID wpisać np. na stronie https://www.wireshark.org/tools/wpa-psk.html aby się poprawnie PSK wygenerował ? Lub może ktoś zna inny sposób ,żeby ten 256bit Preshared Key dostać ?

95

(13 odpowiedzi, napisanych Oprogramowanie)

Bo do zasilania podłącza sie odbiorniki ,a nie kolejne zasilania.

96

(13 odpowiedzi, napisanych Oprogramowanie)

Na tym rysunku to:
1. Kontrolki się nie palą , bo włącznik na routerze nie jest wciśnięty
2. Na tej przejsciowce/płytce jest uklad MAX3232,ktory potrzebuje zasilanie 3,3V i nie bierze go z RS232 ( bo tam de facto żadnego zasilania nie ma) , tylko z routera.

97

(13 odpowiedzi, napisanych Oprogramowanie)

A na elektronice uczyli,żeby nie podłączać generatora do generatora ? Podłączysz dwa zasilania 3.3v ze sobą , w najlepszym razie nic sie nie stanie (prawdopodobieństwo 95%) w najgorszym ktorys stabilizator padnie.
Chyba ,ze w routerze na serialu na pinie 3,3v nie ma tego napięcia.

98

(79 odpowiedzi, napisanych Termometr)

Można jeszcze raz o link ?

99

(177 odpowiedzi, napisanych Oprogramowanie)

Dla testów na MR3420 z najnowszym LEDE z exrootem zainstalowałem domoticza , wchodzę na stronę , ale za żadne skarby nie chce się konfiguracja zachować i po resecie wszystko trzeba ustawiać ponownie. Prośba o jakąś sugestię.

EDIT: Trzeba było w pliku konfiguracyjnym zmienić w pliku konfiguracyjnym wskazanie bazy danych - linijka "option userdata ". Standardowa wskazuje na katalog /var , który nie jest po resecie zachowywany.

100

(7 odpowiedzi, napisanych Oprogramowanie)

Po wpisaniu w Google "pl2303 ds18b20"
http://www.elektroda.pl/rtvforum/topic3012789.html