Tez chetnie przytule 1-3 kostek dla 1043nd v1.0 prosze ok ontakt : jasko@jasko.pl
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez jaskopl
Strony 1
Tez chetnie przytule 1-3 kostek dla 1043nd v1.0 prosze ok ontakt : jasko@jasko.pl
OK. Pacjent odżył. Zła komenda, wystarczyło sysupgrade zrobic ![]()
Dziekuje za pomoc! ![]()
[ 179.568000] udhcpc invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0
[ 179.576000] Call Trace:[<80018c00>] 0x80018c00
[ 179.580000] [<80266010>] 0x80266010
[ 179.584000] [<80266010>] 0x80266010
[ 179.588000] [<8005c7b4>] 0x8005c7b4
[ 179.592000] [<8005c9cc>] 0x8005c9cc
[ 179.596000] [<8005c924>] 0x8005c924
[ 179.600000] [<8005d208>] 0x8005d208
[ 179.604000] [<80060754>] 0x80060754
[ 179.608000] [<8005b9b8>] 0x8005b9b8
[ 179.608000] [<80078514>] 0x80078514
[ 179.612000] [<8007c224>] 0x8007c224
[ 179.616000] [<801ca37c>] 0x801ca37c
[ 179.620000] [<801cc60c>] 0x801cc60c
[ 179.624000] [<8007c7ec>] 0x8007c7ec
[ 179.628000] [<80010460>] 0x80010460
[ 179.632000] [<800a6ef4>] 0x800a6ef4
[ 179.636000] [<801b3d8c>] 0x801b3d8c
[ 179.640000] [<800a4194>] 0x800a4194
[ 179.644000] [<800a471c>] 0x800a471c
[ 179.648000] [<800a4fa4>] 0x800a4fa4
[ 179.652000] [<8026b360>] 0x8026b360
[ 179.656000] [<800a285c>] 0x800a285c
[ 179.660000] [<80005b40>] 0x80005b40
[ 179.660000]
[ 179.664000] Mem-Info:
[ 179.664000] Normal per-cpu:
[ 179.668000] CPU 0: hi: 0, btch: 1 usd: 0
[ 179.672000] active_anon:762 inactive_anon:9 isolated_anon:0
[ 179.672000] active_file:3 inactive_file:7 isolated_file:0
[ 179.672000] unevictable:0 dirty:0 writeback:0 unstable:0
[ 179.672000] free:127 slab_reclaimable:203 slab_unreclaimable:1028
[ 179.672000] mapped:6 shmem:13 pagetables:120 bounce:0
[ 179.700000] Normal free:508kB min:508kB low:632kB high:760kB active_anon:3048kB inactive_anon:36kB active_file:12kB inactive_file:28kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:16256kB mlocked:0kB dirty:0kB writeback:0kB mapped:24kB shmem:52kB slab_reclaimable:812kB slab_unreclaimable:4112kB kernel_stack:408kB pagetables:480kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:3454 all_unreclaimable? yes
[ 179.740000] lowmem_reserve[]: 0 0
[ 179.744000] Normal: 1*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 508kB
[ 179.756000] 23 total pagecache pages
[ 179.760000] 0 pages in swap cache
[ 179.760000] Swap cache stats: add 0, delete 0, find 0/0
[ 179.768000] Free swap = 0kB
[ 179.768000] Total swap = 0kB
[ 179.776000] 4096 pages RAM
[ 179.776000] 826 pages reserved
[ 179.780000] 338 pages shared
[ 179.784000] 2860 pages non-shared
[ 179.788000] [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name
[ 179.796000] [ 346] 0 346 385 27 0 0 0 rcS
[ 179.800000] [ 347] 0 347 386 28 0 0 0 rcS
[ 179.808000] [ 348] 0 348 378 19 0 0 0 init
[ 179.816000] [ 349] 0 349 376 19 0 0 0 logger
[ 179.824000] [ 536] 0 536 379 20 0 0 0 syslogd
[ 179.832000] [ 538] 0 538 375 17 0 0 0 klogd
[ 179.840000] [ 540] 0 540 211 28 0 0 0 hotplug2
[ 179.848000] [ 549] 0 549 220 16 0 0 0 ubusd
[ 179.856000] [ 597] 0 597 374 15 0 0 0 watchdog
[ 179.864000] [ 635] 0 635 394 38 0 0 0 S20network
[ 179.872000] [ 642] 0 642 371 47 0 0 0 netifd
[ 179.880000] [ 700] 0 700 385 26 0 0 0 hotplug-call
[ 179.888000] [ 718] 0 718 385 26 0 0 0 hotplug-call
[ 179.896000] [ 728] 0 728 377 18 0 0 0 udhcpc
[ 179.904000] [ 741] 0 741 455 68 0 0 0 fw3
[ 179.912000] [ 752] 0 752 415 58 0 0 0 wifi
[ 179.920000] [ 759] 0 759 412 55 0 0 0 sh
[ 179.928000] [ 784] 0 784 415 61 0 0 0 wifi
[ 179.936000] [ 813] 0 813 211 27 0 0 0 hotplug2
[ 179.944000] [ 814] 0 814 385 26 0 0 0 hotplug-call
[ 179.952000] [ 822] 0 822 415 61 0 0 0 wifi
[ 179.960000] [ 823] 0 823 420 66 0 0 0 wifi
[ 179.968000] [ 826] 0 826 386 27 0 0 0 hotplug-call
[ 179.976000] [ 834] 0 834 386 27 0 0 0 hotplug-call
[ 179.984000] [ 835] 0 835 240 12 0 0 0 iwconfig
[ 179.992000] [ 836] 0 836 374 15 0 0 0 grep
[ 180.000000] [ 837] 0 837 412 55 0 0 0 sh
[ 180.004000] [ 838] 0 838 412 56 0 0 0 sh
[ 180.012000] [ 839] 0 839 412 55 0 0 0 sh
[ 180.020000] [ 840] 0 840 412 55 0 0 0 sh
[ 180.028000] Out of memory: Kill process 346 (rcS) score 1 or sacrifice child
[ 180.036000] Killed process 347 (rcS) total-vm:1544kB, anon-rss:112kB, file-rss:0kB
[ 180.152000] udhcpc invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0
[ 180.160000] Call Trace:[<80018c00>] 0x80018c00
[ 180.164000] [<80266010>] 0x80266010
[ 180.168000] [<80266010>] 0x80266010
[ 180.172000] [<8005c7b4>] 0x8005c7b4
[ 180.176000] [<8005c9cc>] 0x8005c9cc
[ 180.180000] [<8005c924>] 0x8005c924
[ 180.184000] [<8005d208>] 0x8005d208
[ 180.184000] [<80060754>] 0x80060754
[ 180.188000] [<8005b9b8>] 0x8005b9b8
[ 180.192000] [<80078514>] 0x80078514
[ 180.196000] [<8007c224>] 0x8007c224
[ 180.200000] [<801ca37c>] 0x801ca37c
[ 180.204000] [<801cc60c>] 0x801cc60c
[ 180.208000] [<8007c7ec>] 0x8007c7ec
[ 180.212000] [<80010460>] 0x80010460
[ 180.216000] [<800a6ef4>] 0x800a6ef4
[ 180.220000] [<801b3d8c>] 0x801b3d8c
[ 180.224000] [<800a4194>] 0x800a4194
[ 180.228000] [<800a471c>] 0x800a471c
[ 180.232000] [<800a4fa4>] 0x800a4fa4
[ 180.236000] [<8026b360>] 0x8026b360
[ 180.236000] [<800a285c>] 0x800a285c
[ 180.240000] [<80005b40>] 0x80005b40
[ 180.244000]
[ 180.248000] Mem-Info:
[ 180.248000] Normal per-cpu:
[ 180.252000] CPU 0: hi: 0, btch: 1 usd: 0
[ 180.256000] active_anon:746 inactive_anon:9 isolated_anon:0
[ 180.256000] active_file:3 inactive_file:8 isolated_file:0
[ 180.256000] unevictable:0 dirty:0 writeback:0 unstable:0
[ 180.256000] free:127 slab_reclaimable:203 slab_unreclaimable:1029
[ 180.256000] mapped:6 shmem:13 pagetables:115 bounce:0
[ 180.284000] Normal free:508kB min:508kB low:632kB high:760kB active_anon:2984kB inactive_anon:36kB active_file:12kB inactive_file:32kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:16256kB mlocked:0kB dirty:0kB writeback:0kB mapped:24kB shmem:52kB slab_reclaimable:812kB slab_unreclaimable:4116kB kernel_stack:400kB pagetables:460kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:3606 all_unreclaimable? yes
[ 180.324000] lowmem_reserve[]: 0 0
[ 180.328000] Normal: 1*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 508kB
[ 180.336000] 24 total pagecache pages
[ 180.340000] 0 pages in swap cache
[ 180.344000] Swap cache stats: add 0, delete 0, find 0/0
[ 180.352000] Free swap = 0kB
[ 180.352000] Total swap = 0kB
[ 180.356000] 4096 pages RAM
[ 180.360000] 826 pages reserved
[ 180.364000] 327 pages shared
[ 180.368000] 2872 pages non-shared
[ 180.372000] [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name
[ 180.380000] [ 346] 0 346 385 27 0 0 0 rcS
[ 180.384000] [ 348] 0 348 378 19 0 0 0 init
[ 180.392000] [ 349] 0 349 376 19 0 0 0 logger
[ 180.400000] [ 536] 0 536 379 20 0 0 0 syslogd
[ 180.408000] [ 538] 0 538 375 17 0 0 0 klogd
[ 180.416000] [ 540] 0 540 211 28 0 0 0 hotplug2
[ 180.424000] [ 549] 0 549 220 16 0 0 0 ubusd
[ 180.432000] [ 597] 0 597 374 15 0 0 0 watchdog
[ 180.440000] [ 635] 0 635 394 38 0 0 0 S20network
[ 180.448000] [ 642] 0 642 371 47 0 0 0 netifd
[ 180.456000] [ 700] 0 700 385 26 0 0 0 hotplug-call
[ 180.464000] [ 718] 0 718 385 26 0 0 0 hotplug-call
[ 180.472000] [ 728] 0 728 377 18 0 0 0 udhcpc
[ 180.480000] [ 741] 0 741 455 68 0 0 0 fw3
[ 180.488000] [ 752] 0 752 415 58 0 0 0 wifi
[ 180.496000] [ 759] 0 759 412 55 0 0 0 sh
[ 180.504000] [ 784] 0 784 415 61 0 0 0 wifi
[ 180.512000] [ 813] 0 813 211 27 0 0 0 hotplug2
[ 180.520000] [ 814] 0 814 385 26 0 0 0 hotplug-call
[ 180.528000] [ 822] 0 822 415 61 0 0 0 wifi
[ 180.536000] [ 823] 0 823 420 66 0 0 0 wifi
[ 180.544000] [ 826] 0 826 386 27 0 0 0 hotplug-call
[ 180.552000] [ 834] 0 834 386 27 0 0 0 hotplug-call
[ 180.560000] [ 835] 0 835 240 12 0 0 0 iwconfig
[ 180.568000] [ 836] 0 836 374 15 0 0 0 grep
[ 180.576000] [ 837] 0 837 412 55 0 0 0 sh
[ 180.584000] [ 838] 0 838 412 56 0 0 0 sh
[ 180.588000] [ 839] 0 839 412 55 0 0 0 sh
[ 180.596000] [ 840] 0 840 412 55 0 0 0 sh
[ 180.604000] Out of memory: Kill process 346 (rcS) score 1 or sacrifice child
[ 180.612000] Killed process 349 (logger) total-vm:1504kB, anon-rss:76kB, file-rss:0kB
po 20 rebootach
i nic... czekalem chyba z godzine ![]()
Start to blink diag led ...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Dec 19 17:38:13 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 003F7FFF (3899364)
nvram #03 003F8000 -> 003FFFFF (32768)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 003F7FFF (3899392)
nvram #02 003F8000 -> 003FFFFF (32768)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
CPU type 0x29006: 264MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80700000 - 0x807963C0 (615360)
Initialized Data: 0x8072D210 - 0x8072F970 (10080)
BSS Area: 0x8072F970 - 0x807303C0 (2640)
Local Heap: 0x807303C0 - 0x807943C0 (409600)
Stack Area: 0x807943C0 - 0x807963C0 (8192)
Text (code) segment: 0x80700000 - 0x8072D210 (184848)
Boot area (physical): 0x00797000 - 0x007D7000
Relocation Factor: I:00000000 - D:00000000
Boot version: v4.7
The boot is CFE
mac_init(): Find mac [00:1e:e5:6d:7b:b7] in location 1
Nothing...
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 00-1E-E5-6D-7B-B7, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Len: 0xF0000 (983040) (0xBC040000)
Offset0: 0x1C (28) (0xBC04001C)
Offset1: 0x960 (2400) (0xBC040960)
Offset2: 0xF0000 (983040) (0xBC130000)
Header CRC: 0xCDBF292D
Calculate CRC: 0xCDBF292D
Image 1 is OK
Try to load image 1.
Waiting for 3 seconds to upgrade ...
CMD: [load -raw -addr=0x807963c0 -max=0x770000 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x770000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3780 bytes read
Entry at 0x80001000
Closing network.
et0: link down
Starting program at 0x80001000
[ 0.000000] Linux version 3.3.8 (eric@Osiris) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Thu Oct 17 00:05:39 EDT 2013
[ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300)
[ 0.000000] bcm47xx: using ssb bus
[ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x01
[ 0.000000] found parallel flash.
[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
[ 0.000000] gpiochip_add: registered GPIOs 0 to 15 on device: bcm47xx
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00001000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00001000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Memory: 12912k/16384k available (2480k kernel code, 3472k reserved, 382k data, 168k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled
[ 0.004000] Calibrating delay loop... 262.14 BogoMIPS (lpj=524288)
[ 0.048000] pid_max: default: 32768 minimum: 301
[ 0.052000] Mount-cache hash table entries: 512
[ 0.060000] NET: Registered protocol family 16
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.112000] Switching to clocksource MIPS
[ 0.432000] PCI host bridge to bus 0000:00
[ 0.436000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
[ 0.444000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.448000] ssb: PCI: Fixing up bridge 0000:00:00.0
[ 0.456000] ssb: PCI: Fixing up device 0000:00:00.0
[ 0.460000] ssb: PCI: Fixing latency timer of device 0000:00:00.0 to 168
[ 0.468000] pci 0000:00:01.0: BAR 0: assigned [mem 0x40000000-0x40003fff]
[ 0.484000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 0.492000] ssb: PCI: Fixing up device 0000:00:01.0
[ 0.516000] ssb: Found chip with id 0x4321, rev 0x03 and package 0x01
[ 0.556000] can not parse nvram name pci/1/1/ledbh1(null) with value -1 got -22
[ 0.564000] can not parse nvram name pci/1/1/ledbh2(null) with value -1 got -22
[ 0.572000] can not parse nvram name pci/1/1/ledbh3(null) with value -1 got -22
[ 0.608000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[ 0.620000] NET: Registered protocol family 2
[ 0.624000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.632000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.640000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.648000] TCP: Hash tables configured (established 512 bind 512)
[ 0.652000] TCP reno registered
[ 0.656000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.664000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.672000] NET: Registered protocol family 1
[ 0.684000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.692000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.700000] msgmni has been set to 25
[ 0.704000] io scheduler noop registered
[ 0.708000] io scheduler deadline registered (default)
[ 0.716000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.744000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.772000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.800000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.832000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.844000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000
[ 0.852000] Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x00007f Chip ID 0x0000f9
[ 0.864000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.868000] Amd/Fujitsu Extended Query version 1.1.
[ 0.872000] number of CFI chips: 1
[ 0.876000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000
[ 0.884000] bcm47xx_part: bootloader size: 262144
[ 0.888000] bcm47xx_part: Looking for dual image
[ 0.892000] bcm47xx_part: TRX offset : 0
[ 0.896000] 4 bcm47xx partitions found on MTD device Physically mapped flash
[ 0.904000] Creating 4 MTD partitions on "Physically mapped flash":
[ 0.912000] 0x000000000000-0x000000040000 : "cfe"
[ 0.924000] 0x000000040000-0x0000003f0000 : "linux"
[ 0.932000] 0x000000130000-0x0000003f0000 : "rootfs"
[ 0.944000] mtd: partition "rootfs" set to be root filesystem
[ 0.952000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000
[ 0.960000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
[ 0.968000] 0x0000003f0000-0x000000400000 : "nvram"
[ 0.984000] bcm47xx_sflash: error registering platform driver: -19
[ 0.992000] bcm47xx_nflash: error registering platform driver: -19
[ 1.000000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.008000] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:1e:e5:6d:7b:b7
[ 1.024000] b44 ssb0:1: eth1: PHY Reset would not complete
[ 1.028000] b44 ssb0:1: eth1: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:88:88:88:00:2a
[ 1.040000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
[ 1.048000] TCP cubic registered
[ 1.052000] NET: Registered protocol family 17
[ 1.056000] Bridge firewalling registered
[ 1.060000] Ebtables v2.0 registered
[ 1.064000] 8021q: 802.1Q VLAN Support v1.8
[ 1.084000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.092000] Freeing unused kernel memory: 168k freed
[ 4.744000] diag: Detected 'Linksys WRT160N v1.x'
[ 4.804000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 4.812000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 6.148000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[ 13.668000] JFFS2 notice: (321) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 3 orphan) and 3 of xref (0 dead, 3 orphan) found.
switching to jffs2
- init -
[ 14.116000] b44 ssb0:0: eth0: powering down PHY
Please press Enter to activate this console. [ 16.780000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 16.788000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 17.072000] cfg80211: Calling CRDA to update world regulatory domain
[ 17.076000] cfg80211: World regulatory domain updated:
[ 17.084000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.092000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.100000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.108000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.116000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.124000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.508000] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[ 18.560000] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[ 18.588000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 18.964000] Broadcom 43xx-legacy driver loaded [ Features: PLD ]
[ 19.380000] PPP generic driver version 2.4.2
[ 19.620000] tun: Universal TUN/TAP device driver, 1.6
[ 19.628000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 19.808000] GRE over IPv4 demultiplexor driver
[ 19.864000] GRE over IPv4 tunneling driver
[ 20.056000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.008000] NET: Registered protocol family 24
[ 21.076000] nf_conntrack version 0.5.0 (204 buckets, 816 max)
[ 21.520000] PPTP driver version 0.8.5
[ 23.084000] xt_time: kernel timezone is -0000
[ 24.848000] Hooked IMQ after mangle on PREROUTING
[ 24.852000] Hooked IMQ after nat on POSTROUTING
[ 24.856000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[ 24.972000] Netfilter messages via NETLINK v0.30.
[ 25.128000] ip_set: protocol 6
[ 36.572000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 36.580000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 40.852000] b44 ssb0:0: eth0: powering down PHY
[ 40.876000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 40.884000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 40.900000] device eth0 entered promiscuous mode
[ 40.912000] br-lan: port 1(eth0) entered forwarding state
[ 40.916000] br-lan: port 1(eth0) entered forwarding state
[ 40.976000] b44 ssb0:1: eth1: Link is up at 100 Mbps, full duplex
[ 40.984000] b44 ssb0:1: eth1: Flow control is off for TX and off for RX
[ 42.920000] br-lan: port 1(eth0) entered forwarding state
i na tym wisi.....
W failsafe da sie wejsc [F] [ENTER] - i wtedy normlanie na roota, ale wszystko co robie, czyli wget i etc... konsola przyjmuje ale bez odpowiedzi...
Press the [f] key and hit [enter] to enter failsafe mode
f
- failsafe -
BusyBox v1.19.4 (2013-10-16 23:56:10 EDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.5.11 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision e3cc435 | OpenWrt revision r38347 |
| Built October 16, 2013 | Target brcm47xx/default |
------------------------------------------------------------------
root@(none):/# mount_root
[ 34.084000] JFFS2 notice: (330) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 3 orphan) and 3 of xref (0 dead, 3 orphan) found.
switching to jffs2
root@(none):/# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
none on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,relatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
root@(none):/# cd /tmp
root@(none):/tmp# ls
overlay tmp.tXd6XR
root@(none):/tmp# wget ftp://192.168.1.10/firmware.bin
root@(none):/tmp# ls
firmware.bin overlay tmp.tXd6XR
root@(none):/tmp# mtd -r write firmware.bin firmware
A po serialu nie pójdzie?
pepe2k: a wiesz jak zdemontowac flash'a ? i przeprogramowac podjoł bys sie ?
Niestety, wget czasami 9% czasami 12% i router zablokowany:(
Jakis pomysł?
Postawiony, tylko czekac az sie router podniesie ![]()
C:\160N>pscp -scp c:\160N\v24ok.bin root@192.168.1.1:/tmp
root@192.168.1.1's password:
v24ok.bin | 888 kB | 444.0 kB/s | ETA: 00:00:06 | 24%
.... i router lezy
Znowu minie z pol dnia zanim wstanie.
C:\160N>pscp c:\160N\v24ok.bin root@192.168.1.1:/tmp
root@192.168.1.1's password:
ash: /usr/libexec/sftp-server: not found
Fatal: Received unexpected end-of-file from server
A teraz co?!
ok znalazlem blad : -scp [ nie ten protokol ]
Cezary: masz moze GG lub cos gdzie bysmy mogli sie skontaktowac? Z gory dzieki za pomoc.
[w razie co moje gg:376830]
Owszem.
Wiec czemu nie chce przyjac pliku 1.7mb ??? ![]()
login as: root
root@192.168.1.1's password:
BusyBox v1.19.4 (2013-10-16 23:56:10 EDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.5.11 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision e3cc435 | OpenWrt revision r38347 |
| Built October 16, 2013 | Target brcm47xx/default |
------------------------------------------------------------------
root@Gargoyle:~# free
total used free shared buffers
Mem: 13080 12460 620 0 396
-/+ buffers: 12064 1016
Swap: 0 0 0
root@Gargoyle:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 320.0K 232.0K 88.0K 73% /
/dev/root 2.5M 2.5M 0 100% /rom
tmpfs 6.4M 80.0K 6.3M 1% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 320.0K 232.0K 88.0K 73% /overlay
overlayfs:/overlay 320.0K 232.0K 88.0K 73% /
root@Gargoyle:~#
---------------------------------------------
Z tego wynika ze w /tmp mm ponad 6MB wolnego??
Chodzi mi oto Cezary ze jak juz sie dostane po SCP, do niego czy jakies "pliki" mozna z niego wywalic? Pozatym jak sprawdzic ile wolnego miejsca mu zostalo?
OK. Za zadne skarby nie przyjmuje zadnego FW, nawet v24mini [1.7mb] dochodzi do 1.2 - 1.5 mb i zrywa polaczenie. Jezeli jest to wina "przepelnienia', to pytanie czy mozna cos wyrzucic by zyskac troche miejsca?
Jak juz wgram do /tmp tego v24mini.bin to rozumiem ze:
mtd -r write /tmp/v24mini.bin firmware
Nom mam juz go. v24 gen micro. 1.7MB. Teraz tylko czekać az linksys sie obudzi ![]()
na 100% do /tmp jeszcze za nim cokolwiek zrobilem to sprawdzilem
Cezary: Ok doszedlem do pkt. wrzucania do routerka /tmp obrazu, doszlo d o50-60% i zerwalo polaczenie
Router znowu zablokowany [ lekko swiecaca dioda WiFi ]
No to ja mam chyba wyłączone
albo to jakis dziwny obraz tego gargoylca
No obecnie router oczywiscie nie wstaje, a jeszcze nic nie zrobilem:(
Chciałem dobrze, ale linksys nie udostępnia firmware do tego modelu...
OT się robi:
Tomato: http://tomato.groov.pl/download/K24/bui … 16-VPN.trxściągnij, zmień nazwę na a.trx. Przez winscp przerzuć ten plik do /tmp. Zaloguj się przez ssh i wykonaj
mtd -r write /tmp/a.trx firmware
Cezary: Wszystko super tylko ze po wlaczeniu w GUI SSH, router znowu sie wywala
Domyslnie ma WYŁ. No ale popróbuje z kilka razy, bo jak narazie widze ze 2 opcje zapamietał, wiec jest nadzieja ![]()
Pytanie: Czy musi byc to obraz tomato, czy np moge micro dd-wrt dedykowany wgrac?
Mam FW do tego modelu, prosze tylko napisac co i jak zrobic?
Moj FW: WRT160N_1.02.11_001_US_code.bin
To broadcom - weź oryginał, obetnij nagłówek i przez mtd wgraj mu oryginalny soft. Jeżeli działa to działa, przywróć mu tylko soft.
Cezary, wszystko fajnie ale nigdy sie w to nie bawilem a moja wiedza na akurat ten temat nie jest za wielka. Moze jakas mala instrukcja? Byłbym wdzięczny.
Problem nietypowy. Dostałem od kolegi routerek, który był martwy. linksys wrt160N v1.0. Jak się dowiedziałem działał pod dd-wrt, wczesniej, następnie ktoś chciał zrobić mu "dobrze" i załadować gargoyle, ale chyba poszlo coś nie tak. Routerek obecnie po włączeniu świeci, bardzo delikatnie dioda WiFi. powiedzmy tak na 25-30%. Do routerka nie idzie sie w zaden sposob dostac. Zrobilem Hard Reseta, to po włączeniu POWER zaczoł mrugać przez jakieś 7-10 sekund i znowu lekko świeci WiFi. Po podłączeniu kabelka LAN, diody od 1-4 się zapalają normalnie, niestety IP nie przydziela. Postanowilem więc ze wykorzystam fakt, uzyskania migania POWER LED na starcie, TFPD dorwalem gdzies jakis FW od linksysa 160N v1, wrzucilem na routerka. Poszlo z sukcesem. Odczekalem na wszelki wypadek 10 minut. Router OFF, pozniej ON.... Sytuacja bez zmian. Wiec nie rezygnując, powtórka.... [ zrobilem tak ze 4 razy ]. Wkoncu moim oczom po wyjsciu na obiad [ jakas 1h ] Routerek zaczoł pięknie świecić POWEREM. Podpiolem kabelek, wystukalem 192.168.1.1 i moim oczom ukazał sie zamulajacy Gargoyle w domyslnych ustawieniach w wersji 1.5.11. No i niestety na tym sie konczy histora a zaczyna terazniejszosc. Oile dostac do srodka gargoyle sie moge, to juz zadnych ustawien zmienić nie. Zmiana hasła dostępu, zakonczyla się wywaleniem routera do stanu, początku tego opisu. Próbowałem nawet reset factory, programowo - nic. Probowalem wgrac FW od producęta - nic. Probowalem dd-wrt micro / mini / std - nic.....
Czy jest jakas opcja przywrocenia tego routerka do zycia? Czy mozna go uzyc juz tylko jako pamiątki?
Strony 1
eko.one.pl → Posty przez jaskopl
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc