root@routeros:/dev# opkg update
Downloading http://eko.one.pl/openwrt/kamikaze/trunk/wrt160nl/packages/Packages.gz.
Inflating http://eko.one.pl/openwrt/kamikaze/trunk/wrt160nl/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/eko1.
root@routeros:/dev# opkg install kmod-usb-printer --force-downgrade
Installing kmod-usb-printer (2.6.32.9-1) to root...
Downloading http://eko.one.pl/openwrt/kamikaze/trunk/wrt160nl/packages/kmod-usb-printer_2.6.32.9-1_ar71xx.ipk.
Downgrading kernel on root from 2.6.32.10-1 to 2.6.32.9-1...
Downloading http://eko.one.pl/openwrt/kamikaze/trunk/wrt160nl/packages/kernel_2.6.32.9-1_ar71xx.ipk.
Configuring kmod-usb-printer.
Configuring kernel.
root@routeros:/dev# opkg list-installed
kernel - 2.6.32.9-1
kmod-nls-base - 2.6.32.10-1
kmod-usb-core - 2.6.32.9-1
kmod-usb-ohci - 2.6.32.10-1
kmod-usb-printer - 2.6.32.9-1
kmod-usb-serial - 2.6.32.9-1
kmod-usb-serial-option - 2.6.32.9-1
kmod-usb-storage - 2.6.32.9-1
kmod-usb-uhci - 2.6.32.10-1
kmod-usb2 - 2.6.32.9-1
libusb - 0.1.12-2
p910nd - 0.93-1
usb-modeswitch - 1.1.0-1
root@routeros:/dev#
root@routeros:/dev# lsmod | grep usb
usb_storage            31920  0
usbcore                97440  3 usb_storage,ehci_hcd
scsi_mod               68160  2 usb_storage,sd_mod
nls_base                4800  5 vfat,fat,nls_iso8859_1,nls_cp437,usbcore
root@routeros:/dev# lsmod | grep usblp
root@routeros:/dev# /e

root@routeros:/dev# ls /dev/
1-1                 kmsg                mtd2                mtd5ro              mtdblock4           ppp                 tty
1-1.2               log                 mtd2ro              mtd6                mtdblock5           ptmx                ttyS0
1-1.4               mem                 mtd3                mtd6ro              mtdblock6           pts                 urandom
console             mtd0                mtd3ro              mtdblock0           network_latency     random              usb1
cpu_dma_latency     mtd0ro              mtd4                mtdblock1           network_throughput  sda                 watchdog
full                mtd1                mtd4ro              mtdblock2           null                sda1                zero
fuse                mtd1ro              mtd5                mtdblock3           port                shm
root@routeros:/dev# cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.32.9 ehci_hcd
S:  Product=Atheros AR91xx built-in EHCI controller
S:  SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0409 ProdID=005a Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0204 ProdID=6025 Rev= 1.00
S:  Product=Flash Disk
S:  SerialNumber=191331000E1DB511
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04e8 ProdID=328e Rev= 1.00
S:  Manufacturer=Samsung Electronics Co., Ltd.
S:  Product=CLP-310 Series
S:  SerialNumber=1434BAFQC09876Z
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=1250us
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

 root@routeros:/dev# cat /etc/modules.d/60-usb-printer
usblp vendor=04e8 product=328e

root@routeros:~# dmesg
Linux version 2.6.32.9 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #9 Wed Mar 24 21:53:06 CET 2010
prom: fw_arg0=00000009, fw_arg1=a1f67fb0, fw_arg2=a1f68470, fw_arg3=00000008
MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9130 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802bf5c0, node_mem_map 81000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=WRT160NL
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29396k/32768k available (2038k kernel code, 3372k reserved, 393k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is Linksys WRT160NL
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
yaffs Mar 15 2010 22:44:54 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: en25p64 (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
6 wrt160nl partitions found on MTD device spi0.0
Creating 6 MTD partitions on "spi0.0":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000180000 : "kernel"
0x000000180000-0x0000007e0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=400000, len=3E0000
0x000000400000-0x0000007e0000 : "rootfs_data"
0x0000007e0000-0x0000007f0000 : "nvram"
0x0000007f0000-0x000000800000 : "art"
0x000000040000-0x0000007e0000 : "firmware"
ag71xx_mdio: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
eth0: connected to PHY at ag71xx-mdio:00 [uid=00008306, driver=Realtek RTL8306S]
eth1: Atheros AG71xx at 0xba000000, irq 5
eth1: connected to PHY at ag71xx-mdio:04 [uid=00008306, driver=Realtek RTL8306S]
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
gpio-buttons driver version 0.1.2
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
Registered led device: wrt160nl:blue:power
Registered led device: wrt160nl:amber:wps
Registered led device: wrt160nl:blue:wps
Registered led device: wrt160nl:blue:wlan
ar71xx: pll_reg 0xb8050014: 0x13000a44
eth0: link up (100Mbps/Full duplex)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ext4: Unknown symbol crc16
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.2: new high speed USB device using ar71xx-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 1-1.4: new high speed USB device using ar71xx-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi 0:0:0:0: Direct-Access              Flash Disk       5.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 1005568 512-byte logical blocks: (514 MB/491 MiB)
usb-storage: device scan complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
device eth0 entered promiscuous mode
Generic kernel compatibility enabled based on linux-next next-20100113
ar71xx: pll_reg 0xb8050014: 0x13000a44
eth0: link up (100Mbps/Full duplex)
br-lan: port 1(eth0) entering forwarding state
cfg80211: Calling CRDA to update world regulatory domain
ar71xx: pll_reg 0xb8050018: 0x13000a44
eth1: link up (100Mbps/Full duplex)
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
phy0: Selected rate control algorithm 'ath9k_rate_control'
phy0: Atheros AR9100 MAC/BB Rev:0 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (461 buckets, 1844 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
fuse init (API version 7.13)
eth1: link down
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020
ar71xx: pll_reg 0xb8050018: 0x13000a44
eth1: link up (100Mbps/Full duplex)
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
root@routeros:~#