FAQ o OpenWrt | Sprzedam różne routery | Oddam

2013-03-12 12:04:07

Jeszcze zauważyłem że po utracie kontaktu z routerem(po zaniku zasilania) po przytrzymaniu przycisku na obudownie router restartuje się i wszystko jest ok czyli jest extroot i jest kontakt z routerem. Wydaje mi się że router potrzebuje więcej czasu na zamontowanie karty sd albo karta jakoś inaczej się montuje jak już jest router włączony (przez wpięcie modemu na włączonym sprzęcie). A może coś z automount? Da się jakoś wydłużyć czas montowania?

2013-03-12 11:42:08

Właśnie podłączanie po serialu chciałem uniknąć(ciężko się podobno 3020 rozbiera) ale jak trzeba...

2013-03-12 11:31:02

logread:

Jan  1 01:00:37 Gargoyle kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Memory: 28976k/32768k available (2227k kernel code, 3792k reserved, 421k data, 216k init, 0k highmem)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] NR_IRQS:51
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.090000] NET: Registered protocol family 16
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-MR3020
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.350000] bio: create slab <bio-0> at 0
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.360000] Switching to clocksource MIPS
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.370000] NET: Registered protocol family 2
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.370000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.370000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.380000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.390000] TCP reno registered
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.400000] NET: Registered protocol family 1
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    0.410000] PCI: CLS 0 bytes, default 32
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.440000] msgmni has been set to 56
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.450000] io scheduler noop registered
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.450000] io scheduler deadline registered (default)
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.480000] console [ttyATH0] enabled, bootconsole disabled
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.490000] m25p80 spi0.0: found s25sl032a, expected m25p80
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.500000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.500000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.510000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.510000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.520000] 0x000000020000-0x00000010ba68 : "kernel"
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.540000] 0x00000010ba68-0x0000003f0000 : "rootfs"
Jan  1 01:00:37 Gargoyle kern.warn kernel: [    0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.550000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.560000] mtd: partition "rootfs_data" created automatically, ofs=390000, len=60000
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.570000] 0x000000390000-0x0000003f0000 : "rootfs_data"
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.570000] 0x0000003f0000-0x000000400000 : "art"
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    0.580000] 0x000000020000-0x0000003f0000 : "firmware"
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.600000] ag71xx_mdio: probed
Jan  1 01:00:37 Gargoyle kern.info kernel: [    0.610000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.170000] TCP cubic registered
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.170000] NET: Registered protocol family 17
Jan  1 01:00:37 Gargoyle kern.notice kernel: [    1.180000] Bridge firewalling registered
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.180000] Ebtables v2.0 registered
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.180000] 8021q: 802.1Q VLAN Support v1.8
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan  1 01:00:37 Gargoyle kern.info kernel: [    1.200000] Freeing unused kernel memory: 216k freed
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    3.500000] Registered led device: tp-link:green:3g
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    3.510000] Registered led device: tp-link:green:wlan
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    3.510000] Registered led device: tp-link:green:lan
Jan  1 01:00:37 Gargoyle kern.debug kernel: [    3.510000] Registered led device: tp-link:green:wps
Jan  1 01:00:37 Gargoyle kern.info kernel: [    6.160000] eth0: link up (100Mbps/Full duplex)
Jan  1 01:00:37 Gargoyle kern.info kernel: [   35.820000] usbcore: registered new interface driver usbserial
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.820000] USB Serial support registered for generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.830000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.840000] usbserial: USB Serial Driver core
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.890000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.980000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.090000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.090000] usbcore: registered new interface driver option
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.100000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.230000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.230000] usbcore: registered new interface driver sierra
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.240000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:41 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:41 Gargoyle kern.info kernel: [   41.970000] device eth0 entered promiscuous mode
Jan  1 01:00:41 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.270000] eth0: link up (100Mbps/Full duplex)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.270000] br-lan: port 1(eth0) entered forwarding state
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.280000] br-lan: port 1(eth0) entered forwarding state
Jan  1 01:00:42 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Jan  1 01:00:43 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.280000] br-lan: port 1(eth0) entered forwarding state
Jan  1 01:00:45 Gargoyle user.info sysinit: PHY for wifi device radio0 not found
Jan  1 01:00:46 Gargoyle user.info sysinit: PHY for wifi device radio0 not found
Jan  1 01:00:46 Gargoyle user.info sysinit: PHY for wifi device radio0 not found
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.350000] device wlan0 entered promiscuous mode
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.100000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:49 Gargoyle kern.info kernel: [   49.110000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:51 Gargoyle kern.info kernel: [   51.110000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 04:00:01 Gargoyle user.info sysinit: touch: /etc/crontabs/root: No space left on device
Jan  1 04:00:01 Gargoyle kern.err kernel: [   52.690000] overlayfs: ERROR - failed to whiteout 'root'
Jan  1 04:00:01 Gargoyle user.info sysinit: mv: can't remove '/etc/crontabs/root': No space left on device
Jan  1 04:00:01 Gargoyle kern.err kernel: [   52.760000] overlayfs: ERROR - failed to whiteout 'S50cron'
Jan  1 04:00:01 Gargoyle user.info sysinit: rm: can't remove '/etc/rc.d/S50cron': No space left on device
Jan  1 04:00:01 Gargoyle user.info sysinit: ln: /etc/rc.d/S50cron: File exists
Jan  1 04:00:01 Gargoyle user.info sysinit: touch: /etc/crontabs/root: No space left on device
Jan  1 04:00:01 Gargoyle user.info sysinit: mv: can't remove '/etc/crontabs/root': No space left on device
Jan  1 04:00:01 Gargoyle kern.err kernel: [   53.130000] overlayfs: ERROR - failed to whiteout 'root'
Jan  1 04:00:01 Gargoyle user.info sysinit: rm: can't remove '/etc/rc.d/S50cron': No space left on device
Jan  1 04:00:01 Gargoyle kern.err kernel: [   53.240000] overlayfs: ERROR - failed to whiteout 'S50cron'
Jan  1 04:00:01 Gargoyle user.info sysinit: ln: /etc/rc.d/S50cron: File exists
Jan  1 04:00:04 Gargoyle user.info sysinit: Loading defaults
Jan  1 04:00:05 Gargoyle user.info sysinit: Loading synflood protection
Jan  1 04:00:05 Gargoyle user.info sysinit: Adding custom chains
Jan  1 04:00:06 Gargoyle user.info sysinit: Loading zones
Jan  1 04:00:07 Gargoyle user.info sysinit: Loading forwardings
Jan  1 04:00:08 Gargoyle user.info sysinit: Loading rules
Jan  1 04:00:08 Gargoyle user.info sysinit: Loading redirects
Jan  1 04:00:08 Gargoyle user.info sysinit: Loading includes
Jan  1 04:00:08 Gargoyle user.info sysinit: Optimizing conntrack
Jan  1 04:00:09 Gargoyle user.info sysinit: Loading interfaces
Jan  1 04:00:09 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Jan  1 04:00:13 Gargoyle authpriv.info dropbear[1710]: Running in background
Jan  1 04:00:13 Gargoyle authpriv.info dropbear[1717]: Running in background
Jan  1 04:00:14 Gargoyle daemon.warn httpd_gargoyle[1762]: started as root without requesting chroot(), warning only
Jan  1 04:00:14 Gargoyle daemon.notice httpd_gargoyle[1762]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 04:00:16 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 04:00:16 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: started, version 2.62 cachesize 150
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: using local addresses only for domain lan
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: reading /tmp/resolv.conf.auto
Jan  1 04:00:16 Gargoyle daemon.warn dnsmasq[1824]: ignoring nameserver 192.168.1.3 - local interface
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: using local addresses only for domain lan
Jan  1 04:00:16 Gargoyle daemon.info dnsmasq[1824]: read /etc/hosts - 2 addresses
Jan  1 04:00:16 Gargoyle user.info sysinit: uci: Entry not found
Jan  1 04:00:17 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 04:00:17 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 04:00:17 Gargoyle user.info sysinit: setting up led USB
Jan  1 04:00:17 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 04:00:17 Gargoyle user.info sysinit: setting up led LAN
Jan  1 04:00:24 Gargoyle authpriv.info dropbear[2006]: Child connection from 192.168.1.51:1959
Jan  1 04:00:25 Gargoyle user.notice upnp daemon: external interface not found, not starting
Jan  1 04:00:26 Gargoyle user.notice ifup: Enabling Router Solicitations on loopback (lo)
Jan  1 04:00:33 Gargoyle authpriv.warn dropbear[2006]: Login attempt for nonexistent user from 192.168.1.51:1959
Jan  1 04:00:35 Gargoyle authpriv.info dropbear[2054]: Child connection from 192.168.1.51:1960
Jan  1 04:00:42 Gargoyle authpriv.notice dropbear[2054]: Password auth succeeded for 'root' from 192.168.1.51:1960
Jan  1 04:01:03 Gargoyle kern.info kernel: [  114.860000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Jan  1 04:01:03 Gargoyle kern.info kernel: [  115.360000] scsi0 : usb-storage 1-1:1.0
Jan  1 04:01:03 Gargoyle kern.info kernel: [  115.360000] scsi1 : usb-storage 1-1:1.1
Jan  1 04:01:06 Gargoyle kern.notice kernel: [  117.960000] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  1 04:01:06 Gargoyle kern.notice kernel: [  117.970000] scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jan  1 04:01:06 Gargoyle kern.notice kernel: [  117.980000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan  1 04:04:09 Gargoyle kern.notice kernel: [  301.300000] sd 1:0:0:0: [sda] 3932160 512-byte logical blocks: (2.01 GB/1.87 GiB)
Jan  1 04:04:09 Gargoyle kern.notice kernel: [  301.300000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 04:04:09 Gargoyle kern.info kernel: [  301.320000]  sda: sda1
Jan  1 04:04:10 Gargoyle kern.warn kernel: [  302.000000] head: sending ioctl 540d to a partition!
Jan  1 04:04:10 Gargoyle kern.warn kernel: [  302.010000] head: sending ioctl 540d to a partition!
Jan  1 04:04:12 Gargoyle kern.info kernel: [  304.380000] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
Jan  1 04:04:12 Gargoyle kern.warn kernel: [  304.410000] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
Jan  1 04:04:12 Gargoyle kern.info kernel: [  304.420000] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)

Z jakiegoś powodu nie zamontował mi automatycznie karty. Dopiero po wydaniu polecenia mount.

ps modeswitch jest odinstalowane

2013-03-12 10:59:23

Witam

Posiadam:
router MR3020 (gargoyle 1.5.9.6)
modem e173s-1
karta sd 2gb

Zrobiony extroot - działa.

1.Daje polecenie reboot - router restartuje się włącza extroot i działa tak jak trzeba
2.Odłączam zasilanie(wyciągam wtyczkę) przy włączonym routerze, podłączam. Widzę ze ruszył(diody się świecą), ale nie mam z nim kontaktu. Nie mogę go pingować po lan. Widzę wifi ale nie może się podłączyć.
Żeby znowu działało muszę:
a)odłączyć modem
b)odłączyć i podłączyć zasilanie do routera
c)router włącza się i mam z nim kontakt na powrót(oczywiście bez extroota)
d)podłączam modem - router montuje go(oczywiście dalej brak extroota)
e)polecenie reboot - po restarcie extroot działa jak należy

dodatkowo:
-modem przełączony na stałe

Czemu po zaniku zasilania przestaje działać?

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania

Znalezione posty: 4

1 Odpowiedź przez BartZ 2013-03-12 12:04:07

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040 (934 odpowiedzi, napisanych Oprogramowanie / Software)

2 Odpowiedź przez BartZ 2013-03-12 11:42:08

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040 (934 odpowiedzi, napisanych Oprogramowanie / Software)

3 Odpowiedź przez BartZ 2013-03-12 11:31:02

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040 (934 odpowiedzi, napisanych Oprogramowanie / Software)

4 Odpowiedź przez BartZ 2013-03-12 10:59:23

Odp: [howto] Extroot dla Gargoyle na TL-MR3420/MR3220/MR3020/MR3040 (934 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 4