FAQ o OpenWrt | Sprzedam różne routery | Oddam

2016-10-04 20:07:31

Cześć,
co jakiś czas sporadycznych zawiech doświadczam. Gargoyle 1.6.2.2, ostatni. Ostatnio średnio co drugi dzień. W trakcie namierzania dopiero jestem, ale generalnie objawy sa dwa.
1) katalog dev bez urzadzen modemu
2) katalog dev z urzadzeniami modemu

W obu wypadkach znika internet i nic się nie da z tym zrobić bez fizycznego restartu (tj. poweroff, odpiac zasilanie od routera, odpiac od huba, podpiac zasilanie, poczekac - albo pstryknąć listwą zamiast kabli)

UQMI odpalane ręcznie, przy --get-data-status zwraca "Failed to open device" a przy restarcie z connection monitora - "Failed to connect to service".

Wczoraj byla zawiecha z obecnymi urzadzeniami zarowno w /dev/ jak i /proc/bus/usb/devices, nawet laczyl sie po AT ale od razu SIGTERM lecial - tez tylko restart. Nie wpadlem zeby w dmesga zajrzec wczoraj.
A z obecnej zawiechy logi (w /dev/ brak modemu jak i extroota-sda):

Oct  4 09:57:33 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 09:57:33 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 10:57:33 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 10:57:34 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 11:57:34 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 11:57:36 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 12:57:36 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 12:57:36 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 13:05:31 Gargoyle kern.warn kernel: [54537.020000] ipt_bandwidth: backwards time shift detected, adjusting
Oct  4 13:57:11 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: authenticated
Oct  4 13:57:11 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: associated (aid 1)
Oct  4 13:57:11 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: pairwise key handshake completed (RSN)
Oct  4 13:57:14 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPDISCOVER(br-lan) a4:4e:31:d4:31:0c 
Oct  4 13:57:14 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPOFFER(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 13:57:14 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPREQUEST(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 13:57:14 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 13:57:17 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 13:57:17 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 13:57:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 13:57:37 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 13:57:37 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 14:07:11 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 14:07:11 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 14:07:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:17:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:27:31 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:37:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:47:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:57:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 14:57:37 Gargoyle daemon.notice netifd: wan (1027): Sending renew...
Oct  4 14:57:37 Gargoyle daemon.notice netifd: wan (1027): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 15:07:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 15:17:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 15:18:13 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 15:18:13 Gargoyle daemon.notice netifd: wan (1027): Received SIGTERM
Oct  4 15:18:13 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 15:18:13 Gargoyle daemon.info dnsmasq[1681]: reading /tmp/resolv.conf.auto
Oct  4 15:18:13 Gargoyle daemon.warn dnsmasq[1681]: ignoring nameserver 192.168.1.1 - local interface
Oct  4 15:18:13 Gargoyle daemon.info dnsmasq[1681]: using local addresses only for domain lan
Oct  4 15:19:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 15:19:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 15:19:06 Gargoyle daemon.notice netifd: wan (11090): "Unknown error"
Oct  4 15:19:06 Gargoyle daemon.notice netifd: wan (11106): udhcpc (v1.19.4) started
Oct  4 15:19:06 Gargoyle daemon.notice netifd: wan (11106): Sending discover...
Oct  4 15:19:06 Gargoyle daemon.notice netifd: wan (11106): Sending select for 31.1.217.234...
Oct  4 15:19:06 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 15:19:06 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Oct  4 15:19:07 Gargoyle user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Oct  4 15:19:11 Gargoyle daemon.info dnsmasq[1681]: reading /tmp/resolv.conf.auto
Oct  4 15:19:11 Gargoyle daemon.info dnsmasq[1681]: using nameserver 212.2.96.52#53
Oct  4 15:19:11 Gargoyle daemon.info dnsmasq[1681]: using nameserver 212.2.96.51#53
Oct  4 15:19:11 Gargoyle daemon.warn dnsmasq[1681]: ignoring nameserver 192.168.1.1 - local interface
Oct  4 15:19:11 Gargoyle daemon.info dnsmasq[1681]: using local addresses only for domain lan
Oct  4 15:27:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 15:37:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 15:47:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 15:57:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:07:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:17:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:19:07 Gargoyle daemon.notice netifd: wan (11106): Sending renew...
Oct  4 16:19:07 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 16:27:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:37:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:47:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 16:57:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:07:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:17:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:19:07 Gargoyle daemon.notice netifd: wan (11106): Sending renew...
Oct  4 17:19:07 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 17:27:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:37:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:38:10 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: authenticated
Oct  4 17:38:10 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: associated (aid 1)
Oct  4 17:38:10 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: pairwise key handshake completed (RSN)
Oct  4 17:38:10 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPREQUEST(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 17:38:10 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 17:38:13 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 17:38:13 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 17:47:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 17:57:30 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 18:07:31 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 18:17:31 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: group key handshake completed (RSN)
Oct  4 18:19:08 Gargoyle daemon.notice netifd: wan (11106): Sending renew...
Oct  4 18:19:08 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 19:19:08 Gargoyle daemon.notice netifd: wan (11106): Sending renew...
Oct  4 19:19:08 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 20:19:09 Gargoyle daemon.notice netifd: wan (11106): Sending renew...
Oct  4 20:19:09 Gargoyle daemon.notice netifd: wan (11106): Lease of 31.1.217.234 obtained, lease time 7200
Oct  4 20:23:13 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:23:14 Gargoyle daemon.notice netifd: wan (11106): Received SIGTERM
Oct  4 20:23:14 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:23:14 Gargoyle daemon.info dnsmasq[1681]: reading /tmp/resolv.conf.auto
Oct  4 20:23:14 Gargoyle daemon.warn dnsmasq[1681]: ignoring nameserver 192.168.1.1 - local interface
Oct  4 20:23:14 Gargoyle daemon.info dnsmasq[1681]: using local addresses only for domain lan
Oct  4 20:24:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:24:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:25:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:25:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:26:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:26:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:27:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:27:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:28:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:28:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:29:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:29:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:30:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:30:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:30:19 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: authenticated
Oct  4 20:30:19 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c IEEE 802.11: associated (aid 1)
Oct  4 20:30:19 Gargoyle daemon.info hostapd: wlan0: STA a4:4e:31:d4:31:0c WPA: pairwise key handshake completed (RSN)
Oct  4 20:30:20 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPREQUEST(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 20:30:20 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 20:30:23 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 20:30:23 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 20:31:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:31:01 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:31:33 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c 
Oct  4 20:31:33 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.232 a4:4e:31:d4:31:0c Dell-Komputer
Oct  4 20:32:02 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:32:02 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:33:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:33:02 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:34:01 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:34:02 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:35:02 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:35:02 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:35:57 Gargoyle daemon.info hostapd: wlan0: STA 00:21:5c:5e:ee:e3 IEEE 802.11: authenticated
Oct  4 20:35:57 Gargoyle daemon.info hostapd: wlan0: STA 00:21:5c:5e:ee:e3 IEEE 802.11: associated (aid 2)
Oct  4 20:35:57 Gargoyle daemon.info hostapd: wlan0: STA 00:21:5c:5e:ee:e3 WPA: pairwise key handshake completed (RSN)
Oct  4 20:36:00 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPDISCOVER(br-lan) 00:21:5c:5e:ee:e3 
Oct  4 20:36:00 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPOFFER(br-lan) 192.168.1.203 00:21:5c:5e:ee:e3 
Oct  4 20:36:00 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPREQUEST(br-lan) 192.168.1.203 00:21:5c:5e:ee:e3 
Oct  4 20:36:00 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.203 00:21:5c:5e:ee:e3 Mateusz-Lap
Oct  4 20:36:02 Gargoyle user.notice /usr/lib/gargoyle/ping_watchdog.sh: WAN Restart
Oct  4 20:36:02 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Oct  4 20:36:03 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPINFORM(br-lan) 192.168.1.203 00:21:5c:5e:ee:e3 
Oct  4 20:36:03 Gargoyle daemon.info dnsmasq-dhcp[1681]: DHCPACK(br-lan) 192.168.1.203 00:21:5c:5e:ee:e3 Mateusz-Lap
(ciach)

do 20.23 internet był

dmesg

root@Gargoyle:~# dmesg
[    0.000000] Linux version 3.3.8 (cezary@eko.one.pl) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #67 Sat Sep 27 09:51:31 CEST 2014
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7241 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802ed700, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-MR3420 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29044k/32768k available (2224k kernel code, 3724k reserved, 391k data, 184k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
[    0.100000] MIPS: machine is TP-LINK TL-MR3420
[    0.500000] registering PCI controller with io_map_base unset
[    0.540000] bio: create slab <bio-0> at 0
[    0.550000] PCI host bridge to bus 0000:00
[    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.560000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.560000] pci 0000:00:00.0: [168c:002e] type 0 class 0x000280
[    0.560000] pci 0000:00:00.0: fixup device configuration
[    0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
[    0.570000] pci 0000:00:00.0: supports D1
[    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    0.570000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.580000] Switching to clocksource MIPS
[    0.580000] NET: Registered protocol family 2
[    0.590000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.590000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.600000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.610000] TCP reno registered
[    0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.630000] NET: Registered protocol family 1
[    0.630000] PCI: CLS 0 bytes, default 32
[    0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.650000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.660000] msgmni has been set to 56
[    0.670000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.680000] io scheduler noop registered
[    0.680000] io scheduler deadline registered (default)
[    0.690000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.720000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.720000] console [ttyS0] enabled, bootconsole disabled
[    0.740000] m25p80 spi0.0: found en25f32, expected m25p80
[    0.740000] m25p80 spi0.0: en25f32 (4096 Kbytes)
[    0.750000] 5 tp-link partitions found on MTD device spi0.0
[    0.760000] Creating 5 MTD partitions on "spi0.0":
[    0.760000] 0x000000000000-0x000000020000 : "u-boot"
[    0.770000] 0x000000020000-0x00000010b600 : "kernel"
[    0.770000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.790000] 0x00000010b600-0x0000003f0000 : "rootfs"
[    0.790000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.810000] mtd: partition "rootfs" set to be root filesystem
[    0.810000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000
[    0.820000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
[    0.830000] 0x0000003f0000-0x000000400000 : "art"
[    0.830000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.860000] ag71xx_mdio: probed
[    0.860000] eth0: Atheros AG71xx at 0xba000000, irq 5
[    1.420000] eth0: Found an AR7240/AR9330 built-in switch
[    2.450000] eth1: Atheros AG71xx at 0xb9000000, irq 4
[    3.000000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    3.010000] TCP cubic registered
[    3.010000] NET: Registered protocol family 17
[    3.020000] Bridge firewalling registered
[    3.020000] Ebtables v2.0 registered
[    3.030000] 8021q: 802.1Q VLAN Support v1.8
[    3.040000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    3.050000] Freeing unused kernel memory: 184k freed
[    6.470000] Registered led device: tp-link:green:system
[    6.470000] Registered led device: tp-link:green:qss
[    6.470000] Registered led device: tp-link:green:3g
[    9.800000] JFFS2 notice: (448) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 36 of xref (0 dead, 18 orphan) found.
[   10.540000] SCSI subsystem initialized
[   10.710000] usbcore: registered new interface driver usbfs
[   10.720000] usbcore: registered new interface driver hub
[   10.730000] usbcore: registered new device driver usb
[   11.190000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.200000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[   11.210000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   11.250000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   11.270000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   11.270000] hub 1-0:1.0: USB hub found
[   11.280000] hub 1-0:1.0: 1 port detected
[   11.300000] Initializing USB Mass Storage driver...
[   11.300000] usbcore: registered new interface driver usb-storage
[   11.310000] USB Mass Storage support registered.
[   11.600000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   11.750000] hub 1-1:1.0: USB hub found
[   11.750000] hub 1-1:1.0: 4 ports detected
[   12.050000] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
[   12.180000] scsi0 : usb-storage 1-1.2:1.0
[   12.270000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[   12.410000] scsi1 : usb-storage 1-1.4:1.5
[   13.180000] scsi 0:0:0:0: Direct-Access     Mass     Storage Device   1.00 PQ: 0 ANSI: 0 CCS
[   13.410000] scsi 1:0:0:0: CD-ROM            L_T_E     USB SCSI CD-ROM  USB PQ: 0 ANSI: 0
[   13.420000] scsi 1:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 0
[   13.440000] sd 1:0:0:1: [sdb] Attached SCSI removable disk
[   13.450000] sd 0:0:0:0: [sda] 3887104 512-byte logical blocks: (1.99 GB/1.85 GiB)
[   13.460000] sd 0:0:0:0: [sda] Write Protect is off
[   13.470000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[   13.470000] sd 0:0:0:0: [sda] No Caching mode page present
[   13.470000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   13.480000] sd 0:0:0:0: [sda] No Caching mode page present
[   13.490000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   13.500000]  sda: sda1
[   13.500000] sd 0:0:0:0: [sda] No Caching mode page present
[   13.510000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   13.520000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   33.810000] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[   33.920000] EXT4-fs (sda1): recovery complete
[   33.930000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   34.640000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   34.650000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   34.830000] cfg80211: Calling CRDA to update world regulatory domain
[   34.840000] cfg80211: World regulatory domain updated:
[   34.840000] cfg80211:  DFS Master region: unset
[   34.850000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   34.860000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   34.860000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   35.860000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   35.870000] ath: EEPROM regdomain: 0x0
[   35.870000] ath: EEPROM indicates default country code should be used
[   35.870000] ath: doing EEPROM country->regdmn map search
[   35.870000] ath: country maps to regdmn code: 0x3a
[   35.870000] ath: Country alpha2 being used: US
[   35.870000] ath: Regpair used: 0x3a
[   35.890000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   35.890000] Registered led device: ath9k-phy0
[   35.890000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
[   35.900000] cfg80211: Calling CRDA for country: US
[   35.910000] cfg80211: Regulatory domain changed to country: US
[   35.910000] cfg80211:  DFS Master region: unset
[   35.920000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   35.930000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   35.940000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   36.170000] PPP generic driver version 2.4.2
[   36.320000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   36.730000] NET: Registered protocol family 24
[   36.800000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
[   37.410000] xt_time: kernel timezone is -0000
[   38.100000]  Hooked IMQ after mangle on PREROUTING
[   38.110000]  Hooked IMQ after nat on POSTROUTING
[   38.110000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[   38.320000] Netfilter messages via NETLINK v0.30.
[   38.340000] ip_set: protocol 6
[   38.930000] usbcore: registered new interface driver cdc_acm
[   38.940000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   39.070000] usbcore: registered new interface driver usbserial
[   39.080000] USB Serial support registered for generic
[   39.080000] usbcore: registered new interface driver usbserial_generic
[   39.090000] usbserial: USB Serial Driver core
[   39.140000] usbcore: registered new interface driver cdc_wdm
[   39.170000] usbcore: registered new interface driver cdc_ether
[   39.310000] usbcore: registered new interface driver cdc_ncm
[   39.340000] qmi_wwan 1-1.4:1.0: not on our whitelist - ignored
[   39.340000] qmi_wwan 1-1.4:1.1: not on our whitelist - ignored
[   39.350000] qmi_wwan 1-1.4:1.2: not on our whitelist - ignored
[   39.360000] qmi_wwan 1-1.4:1.3: not on our whitelist - ignored
[   39.370000] qmi_wwan 1-1.4:1.4: cdc-wdm0: USB WDM device
[   39.370000] qmi_wwan 1-1.4:1.4: wwan0: register 'qmi_wwan' at usb-ehci-platform-1.4, Qualcomm WWAN/QMI device, 4a:be:88:0f:2e:c2
[   39.380000] usbcore: registered new interface driver qmi_wwan
[   39.490000] USB Serial support registered for GSM modem (1-port)
[   39.500000] option 1-1.4:1.0: GSM modem (1-port) converter detected
[   39.510000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[   39.510000] option 1-1.4:1.1: GSM modem (1-port) converter detected
[   39.520000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[   39.530000] option 1-1.4:1.2: GSM modem (1-port) converter detected
[   39.540000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[   39.540000] option 1-1.4:1.3: GSM modem (1-port) converter detected
[   39.550000] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB3
[   39.560000] usbcore: registered new interface driver option
[   39.560000] option: v0.7.2:USB Driver for GSM modems
[   39.700000] USB Serial support registered for Sierra USB modem
[   39.700000] usbcore: registered new interface driver sierra
[   39.710000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   48.460000] device eth0 entered promiscuous mode
[   55.380000] device wlan0 entered promiscuous mode
[   55.970000] br-lan: port 2(wlan0) entered forwarding state
[   55.980000] br-lan: port 2(wlan0) entered forwarding state
[   57.980000] br-lan: port 2(wlan0) entered forwarding state
[  133.250000] ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
[  133.260000]                old minutes west=0, new minutes west=-120
[54537.020000] ipt_bandwidth: backwards time shift detected, adjusting
[81934.120000] eth0: link up (1000Mbps/Full duplex)
[81934.120000] br-lan: port 1(eth0) entered forwarding state
[81934.130000] br-lan: port 1(eth0) entered forwarding state
[81934.220000] usb 1-1: USB disconnect, device number 2
[81934.230000] usb 1-1.2: USB disconnect, device number 3
[81934.240000] usb 1-1.4: USB disconnect, device number 4
[81934.240000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[81934.250000] option 1-1.4:1.0: device disconnected
[81934.260000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[81934.270000] option 1-1.4:1.1: device disconnected
[81934.270000] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[81934.280000] option 1-1.4:1.2: device disconnected
[81934.280000] option: option_instat_callback: error -143
[81934.290000] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[81934.300000] option 1-1.4:1.3: device disconnected
[81934.300000] qmi_wwan 1-1.4:1.4: wwan0: unregister 'qmi_wwan' usb-ehci-platform-1.4, Qualcomm WWAN/QMI device
[81934.600000] usb 1-1: new high-speed USB device number 5 using ehci-platform
[81934.770000] hub 1-0:1.0: unable to enumerate USB device on port 1
[81935.030000] Buffer I/O error on device sda1, logical block 1540612
[81935.030000] Buffer I/O error on device sda1, logical block 1540613
[81935.040000] Buffer I/O error on device sda1, logical block 1540614
[81935.040000] Buffer I/O error on device sda1, logical block 1540615
[81935.050000] EXT4-fs error (device sda1): ext4_readdir:173: inode #385027: comm hotplug-call: path /lib/functions/fsck: directory contains a hole at offset 0
[81935.070000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #385027: comm ls: reading directory lblock 0
[81935.160000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #229377: comm hotplug-call: reading directory lblock 0
[81935.280000] EXT4-fs error (device sda1): ext4_readdir:173: inode #385027: comm hotplug-call: path /lib/functions/fsck: directory contains a hole at offset 0
[81935.420000] Buffer I/O error on device sda1, logical block 1197112
[81935.430000] Buffer I/O error on device sda1, logical block 1197113
[81935.430000] Buffer I/O error on device sda1, logical block 1197114
[81935.440000] Buffer I/O error on device sda1, logical block 1197115
[81935.450000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81935.470000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #299428: comm ls: reading directory lblock 0
[81935.620000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81935.640000] eth0: link down
[81935.640000] br-lan: port 1(eth0) entered disabled state
[81935.830000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.040000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.240000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.440000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.640000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.750000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81936.920000] EXT4-fs error (device sda1): ext4_readdir:173: inode #385027: comm hotplug-call: path /lib/functions/fsck: directory contains a hole at offset 0
[81937.060000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81937.160000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81937.260000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81937.360000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299428: comm hotplug-call: path /etc/hotplug.d/usb: directory contains a hole at offset 0
[81937.640000] eth0: link up (1000Mbps/Full duplex)
[81937.640000] br-lan: port 1(eth0) entered forwarding state
[81937.650000] br-lan: port 1(eth0) entered forwarding state
[81939.650000] br-lan: port 1(eth0) entered forwarding state
[81994.780000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #229377: comm ash: reading directory lblock 0
[82416.590000] Buffer I/O error on device sda1, logical block 1197064
[82416.600000] Buffer I/O error on device sda1, logical block 1197065
[82416.600000] Buffer I/O error on device sda1, logical block 1197066
[82416.610000] Buffer I/O error on device sda1, logical block 1197067
[82416.620000] EXT4-fs error (device sda1): ext4_readdir:173: inode #299052: comm crond: path /etc/crontabs: directory contains a hole at offset 0
[82686.280000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #229377: comm ash: reading directory lblock 0
[82686.300000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #135169: comm ash: reading directory lblock 0
[82686.310000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #36866: comm ash: reading directory lblock 0
[83399.150000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #229377: comm ash: reading directory lblock 0

uptime w chwili pisania [20:57] ~23godziny, czyli 82800.

root@Gargoyle:~# cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

i teraz dylemat jajka i kury.
Czy SIGTERM poszedl z powodu bledow na extroocie, czy tylko ifup wan sie nie udaje z tego powodu?

Nie mam linuksa pod reka wiec sciagniecie fsck do ramu routera zaraz uskutecznie, ale generalnie zastanawia mnie niestabilność. Prąd za bardzo w domu nie znika (najczesciej uptime > 2d i brak netu, meaning router sie nie restartuje, zegar w mikrofalowce tez jest). na gargoylu 1.4.x i lacznosci PPP / po AT zwichy sie zdarzaly ale raz na miesiac-dwa. na 1.6.x z extrootem i uqmi/NDIS blizej raz na dwa tygodnie.

Hub Logilink UA0085 z zasilaniem 2A od samego początku (4 lata).

2016-10-01 23:14:35

przy upgradzie do 1.6.2.2 (z 1.4 chyba, z 2012 soft) na 3020 v1 miałem identyczny problem. Udalo mi sie wbic w failsafe, ale dopiero zdaje sie wgranie nie upgradu a pelnej paczki z zaoraniem konfiguracji pomoglo.

2016-06-07 17:55:04

dla potomności,
http://www.3g-modem-wiki.com/page/ZTE+AT-commands
ZCDRUN=8 działa, na /dev/ttyUSB3, mozna wyjmowac i wkladac bez szkody dla extroota.

modem po wlozeniu jest rejestrowany jako modem i dziala.
Trzy pytania jeszcze:
1) jak wywalic z hotpluga/inita usb_modeswitch bez wywalania binarki/pakietu ?
2) odpalenie polaczenia bez monitora polaczenia to bedzie cos w ten deseń:

ifdown wan
uqmi -d /dev/cdc-wdm0 --set-device-operating-mode offline
uqmi -d /dev/cdc-wdm0 --set-device-operating-mode reset
sleep 20
uqmi -d /dev/cdc-wdm0 --set-device-operating-mode online
sleep 20
ifup wan

?
3) czy przez QMI da rade sprawdzic np. sile sygnalu?
Dzieki

2016-06-07 17:09:44

pytam bo wywalilem usb_modeswitch i zastanawiam sie czy da rade przestawic modem na stale

2016-06-07 16:46:22

dobra, zadziałało.
Ale, po delikatnym wylaczeniu pradu (przez komende poweroff ) i ponowne wlaczenie routera ,modem sie nie odzywa. Po przelaczeniu na RAS/PPP i reboocie niby wszystko pieknie ładnie, dioda caly czas zielona,
Jan 1 16:01:24 Gargoyle local2.info chat[1961]: CONNECT
Jan 1 16:01:24 Gargoyle local2.info chat[1961]: -- got it
Jan 1 16:01:24 Gargoyle local2.info chat[1961]: send ( ^M)
Jan 1 16:01:24 Gargoyle daemon.info pppd[1957]: Serial connection established.
Jan 1 16:01:24 Gargoyle daemon.info pppd[1957]: Using interface 3g-wan
Jan 1 16:01:24 Gargoyle daemon.notice pppd[1957]: Connect: 3g-wan <--> /dev/ttyUSB2

ale ping nie przechodzi, nowej trasy w route -n nie ma, dioda na modemie nie miga. W QMI też, po prostu nie działa (z aktywnym monitorem polaczen). Przy wyjm/wloz modemu extroot na pendraku wpiętym do huba się wywali, więc pytanie czy da się go przełączyć na stałe albo delikatniej mode_switcha wywolywac (zeby extroota nie wywalil) ? Czy odlaczac zasilanie od routera po poweroff, od huba, wlaczyc router, wlaczyc zasilanie do hubu?

2016-06-04 23:37:42

extroota tez nie moge zrobic.
uci commit fstab
uci: I/O error.

firstboot i wszystko od poczatku,
tyle ze wpierw extroot, potem QMI?

2016-06-04 19:48:21

nie zapcha się od statystyk w miesiac?
z paru rzeczy nie bede korzystal (bandwidth shaping, QoS, bridge) to bym to mogl wywalic.

2016-06-04 19:38:37

Dzięki, poszło! ^^
Speedtest ~53Mbps, test sciagania z chomika 4200-4800 KB/s vs. 1600 na RAS@1.6.2, vs. 800-1000 na RAS@1.5.5
Na Flashu 36 kilo zostało. Które pakiety są na rootfsie poza tymi doinstalowanymi?
powyżej 50-100 KB wypadałoby pewnie zostawić

2016-06-04 19:02:19

Hej,
czy komuś w tej kombinacji udało się uruchomić staruszka via qmi?

Uaktualniłem dzisiaj gargoyle 1.5.5 PL -> 1.6.2 (ostatni obraz, na attitude_adjustment), działa tak piąty rok z aktywnym hubem.

Doinstalowałem kmod-usb-net-qmi-wwan , ale ze strzępów informacji wnioskuje,że potrzebny jest jeszcze albo lua (na co brak miejsca we flashu i konieczny extroot) albo uqmi ?
http://eko.one.pl/forum/viewtopic.php?pid=76450#p76450 (QMI v1)
http://eko.one.pl/forum/viewtopic.php?id=10793

speedtest po aktualizacji ~16Mbps na wifi N+G+B / ~26Mbps na kablu. I tak jest roznica w stosunku do starego gargoyla , ale chcialem sprobowac czy w ramach NDIS/qmi do 30Mbps na wifi dobije

siec plusa, nadajnik plusa <1km, sygnal >= -51dBm (CSQ od 26,99 do 31,99).

Dzięki z góry

2012-08-03 19:13:40

ZTE MF821, Cezary juz je testował, ale nameczylem sie co niemiara, żeby to odpalić via hub pod MR3420. Teraz w podróży jestem, ale w tygodniu przekleje co tam trzeba bylo dopisac do init.d

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0167 Rev= 0.00
S: Manufacturer=ZTE,Incorporated
S: Product=ZTE LTE Technologies MSM
S: SerialNumber=MF821_FFFS111111
C:* #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania

Znalezione posty: 10

1 Temat przez geordi 2016-10-04 20:07:31

Temat: MR3420 v1 + MF821 +extroot problemy ze stabilnością na uqmi (1 odpowiedzi, napisanych Oprogramowanie / Software)

2 Odpowiedź przez geordi 2016-10-01 23:14:35

Odp: TL-MR3220 v1 po aktualizacji nie działa (19 odpowiedzi, napisanych Oprogramowanie / Software)

3 Odpowiedź przez geordi 2016-06-07 17:55:04

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

4 Odpowiedź przez geordi 2016-06-07 17:09:44

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

5 Odpowiedź przez geordi 2016-06-07 16:46:22

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

6 Odpowiedź przez geordi 2016-06-04 23:37:42

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

7 Odpowiedź przez geordi 2016-06-04 19:48:21

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

8 Odpowiedź przez geordi 2016-06-04 19:38:37

Odp: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

9 Temat przez geordi 2016-06-04 19:02:19

Temat: MR3420v1 + MF821 (13 odpowiedzi, napisanych Oprogramowanie / Software)

10 Odpowiedź przez geordi 2012-08-03 19:13:40

Odp: Modemy USB GSM działające pod Openwrt (79 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 10