Cześć
Chciałem się dowiedzieć czy obraz pobrany z eko.one.pl zawiera skrypt do zarządzania wnetylatorem od procka?
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 1 z 34)
eko.one.pl → Posty przez modelos
Znalezione posty: 1 do 25 z 839
1 2026-01-25 17:10:54
Temat: Czy najnowszy obraz dla Banana Pi4 zawiera skryp do speed FAN (1 odpowiedzi, napisanych Oprogramowanie / Software)
2 2025-08-24 20:01:49
Odp: VLAN na banana pi r4 (2 odpowiedzi, napisanych Oprogramowanie / Software)
Dziękuję za info 
3 2025-08-24 18:03:43
Temat: VLAN na banana pi r4 (2 odpowiedzi, napisanych Oprogramowanie / Software)
Dzień dobry
Zakupiłem Banana Pi RPI 4 i chciałbym przenieść ustawienia jakie z TP-LINK WDR 3600 na nowy router, a szczególnie moje ustawienia związane z vlan. Czy tagowanie Vlan bedzie takie samo jak na TP-LINK? Moim zdaniem nie ale prośba o pomoc. poniżej moje ustawnia dotyczące VLAN. Różnica napewno będzie jeżeli chodzi o ilość portow bo w TP-LINK mam 4 LAN a w banana Pi 3 LAN
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 4 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 0t'
config switch_vlan
option device 'switch0'
option vlan '52'
option ports '1t 5'
4 2025-08-02 18:32:06
Temat: Aktualizacja banana pi 4 z domyślnego OpenWrt 21.02 na najnowszy 24.0. (1 odpowiedzi, napisanych Oprogramowanie / Software)
Cześć
Czy udało się komus zrobić update urządzenia do najnowszej wersji OpenWrt 24.0.2? U mnie niestety nie chce się wykonać update i pojawia się komunikat
Flash image?
The flash image was uploaded. Below is the checksum and file size listed, compare them with the original file to ensure data integrity.
Click 'Continue' below to start the flash procedure.
Size: 16.25 MiB
MD5: 25047fcd267638919d9bd17c967a36ab
SHA256: 29d4585ef58fd9ef24edb64cb72db916ad2e37629945a763428c76ef3a826eb3
• Keep settings and retain the current configuration
cert_verify: cannot parse cert Thu Jul 31 20:01:22 UTC 2025 upgrade: Device bananapi,bpi-r4,mt7988a not supported by this image Thu Jul 31 20:01:22 UTC 2025 upgrade: Supported devices: bananapi,bpi-r4 Image check failed.
The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform.
Skip from backup files that are equal to those in /rom
Include in backup a list of current installed packages at /etc/backup/installed_packages.txt
Image check failed:
cert_verify: cannot parse cert Thu Jul 31 20:01:22 UTC 2025 upgrade: Device bananapi, bpi-r4,mt7988a not supported by this image Thu Jul 31 20:01:22 UTC 2025 upgrade: Supported devices: bananapi,bpi-r4 Image check failed.
Force upgrade
Select 'Force upgrade' to flash the image even if the image format check fails. Use only if you are sure that the firmware is correct and meant for your
Czy już ktoś miał podonbne problemy ?
5 2024-10-30 16:40:31
Odp: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
ip r
default via 192.168.0.1 dev end0 proto dhcp src 192.168.0.3 metric 100
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1
172.30.32.0/23 dev hassio proto kernel scope link src 172.30.32.1
192.168.0.0/24 dev end0 proto kernel scope link src 192.168.0.3 metric 100
6 2024-10-29 22:27:37
Odp: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
end0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fdcd:1f57:72d6::617 prefixlen 128 scopeid 0x0<global>
inet6 fdcd:1f57:72d6:0:2f45:431f:e6a:3e16 prefixlen 64 scopeid 0x0<global>
inet6 fe80::d6b4:7c0:ac5e:a1e7 prefixlen 64 scopeid 0x20<link>
ether 2c:cf:67:08:45:b3 txqueuelen 1000 (Ethernet)
RX packets 36321 bytes 11926076 (11.3 MiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 19940 bytes 5048004 (4.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 106
7 2024-10-29 22:23:54
Odp: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
tego nie wiem mam zrobione ze router nadaje IP dla rpi. jak mam to sprawdzić
8 2024-10-29 21:53:03
Odp: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
logi z openvpn
połączenie z 192.168.0.1 działa
2024-10-29 20:49:54 iPhoneM/xxxxxxxxxxSENT CONTROL [iPhoneM]: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,redirect-gateway def1,route-gateway 10.8.0.1,topology subnet,ping 10,ping-restart 120,ifconfig 10.8.0.2 255.255.255.0,peer-id 2,cipher AES-256-GCM' (status=1)
2024-10-29 20:49:54 iPhoneM/37.248.219.115:31010 PUSH: Received control message: 'PUSH_REQUEST'
2024-10-29 20:49:59 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-10-29 20:49:59 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-10-29 20:50:07 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-10-29 20:50:07 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-10-29 20:50:23 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-10-29 20:50:23 read UDPv6 [NO-INFO]: Connection refused (code=146)
połączenie 192.168.0.3 nie działa
2024-10-29 20:50:40 192.168.0.196:49892 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2024-10-29 20:50:40 192.168.0.196:49892 TLS Error: TLS handshake failed
2024-10-29 20:50:40 192.168.0.196:49892 SIGUSR1[soft,tls-error] received, client-instance restarting
9 2024-10-29 14:46:20
Odp: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdcd:1f57:72d6::/48'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth0.1'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.0.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'eth0.2'
option macaddr 'xx:xx:xx:'
config interface 'wan'
option device 'eth0.2'
option proto 'dhcp'
option mtu '1472'
config interface 'wan6'
option device 'eth0.2'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 4 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 0t'
config switch_vlan
option device 'switch0'
option vlan '52'
option ports '1t 5'
ot@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdcd:1f57:72d6::/48'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth0.1'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.0.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'eth0.2'
option macaddr 'x'
config interface 'wan'
option device 'eth0.2'
option proto 'dhcp'
option mtu '1472'
config interface 'wan6'
option device 'eth0.2'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 4 0t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 0t'
config switch_vlan
option device 'switch0'
option vlan '52'
option ports '1t 5'
root@OpenWrt:~# cat /etc/config/firewall
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'
config zone
option name 'lan'
list network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
config zone
option name 'wan'
list network 'wan'
list network 'wan6'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config zone
option name 'vpn'
option input 'ACCEPT'
option forward 'ACCEPT'
option output 'ACCEPT'
option network 'vpn'
option masq '1'
config forwarding
option src 'vpn'
option dest 'wan'
config forwarding
option src 'vpn'
option dest 'lan'
config forwarding
option src 'lan'
option dest 'wan'
config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'
config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option src_ip 'fc00::/6'
option dest_ip 'fc00::/6'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-MLD'
option src 'wan'
option proto 'icmp'
option src_ip 'fe80::/10'
list icmp_type '130/0'
list icmp_type '131/0'
list icmp_type '132/0'
list icmp_type '143/0'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-IPSec-ESP'
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option name 'Allow-ISAKMP'
option src 'wan'
option dest 'lan'
option dest_port '500'
option proto 'udp'
option target 'ACCEPT'
config include
option path '/etc/firewall.user'
config rule
option name 'OpenVPN'
option target 'ACCEPT'
option src 'wan'
option proto 'udp'
option dest_port '1194'
config forwarding
option src 'vpn'
option dest 'lan'
at /etc/config/openvpn
config openvpn 'custom_config'
option enabled '0'
option config '/etc/openvpn/my-vpn.conf'
config openvpn 'sample_server'
option enabled '0'
option port '443'
option proto 'tcp'
option dev 'tun'
option ca '/etc/openvpn/ca.crt'
option cert '/etc/openvpn/server.crt'
option key '/etc/openvpn/server.key'
option dh '/etc/openvpn/dh1024.pem'
option server '10.8.0.0 255.255.255.0'
option ifconfig_pool_persist '/tmp/ipp.txt'
option keepalive '10 120'
option compress 'lzo'
option persist_key '1'
option persist_tun '1'
option user 'nobody'
option status '/tmp/openvpn-status.log'
option verb '3'
config openvpn 'sample_client'
option enabled '0'
option client '1'
option dev 'tun'
option proto 'udp'
list remote 'my_server_1 443'
option resolv_retry 'infinite'
option nobind '1'
option persist_key '1'
option persist_tun '1'
option user 'nobody'
option ca '/etc/openvpn/ca.crt'
option cert '/etc/openvpn/client.crt'
option key '/etc/openvpn/client.key'
option compress 'lzo'
option verb '3'
config openvpn 'home'
option enabled '1'
option dev 'tun0'
option port '1194'
option proto 'udp'
option keepalive '10 120'
option log '/tmp/openvpn.log'
option verb '3'
option ca '/etc/openvpn/ca.crt'
option cert '/etc/openvpn/serwer.crt'
option key '/etc/openvpn/serwer.key'
option server '10.8.0.0 255.255.255.0'
option dh '/etc/openvpn/dh2048.pem'
list push 'route 192.168.0.0 255.255.255.0'
list push 'redirect-gateway def1'
option topology 'subnet'
cat /etc/openvpn.user
#!/bin/sh
#
# This file is interpreted as shell script.
# Put your custom openvpn action here, they will
# be executed with each opevnp event.
#
# $ACTION
# <down> down action is generated after the TUN/TAP device is closed
# <up> up action is generated after the TUN/TAP device is opened
# $INSTANCE Name of the openvpn instance which went up or down
10 2024-10-29 13:04:41
Temat: OpenVpn a logowanie się zdalne do np HomeAssitant (12 odpowiedzi, napisanych Oprogramowanie / Software)
Cześć
Mam problem aby za pomocą OpenVpn zalogować się zdalnie do HA. Jednakże mogę się zalogować do router. Co mam zrobić aby to umożliwić
11 2024-07-03 19:08:40
Odp: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Chciałem zainstalować ze swojej kompilacji
/home/kali/openwrt/bin/targets/ath79/generic/packages
I znów takie coś się pojawiło
opkg install /tmp/kmod-tun_5.15.150-1_mips_24kc.ipk
Unknown package 'kmod-tun'.
Collected errors:
* pkg_hash_check_unresolved: cannot find dependency kernel (= 5.15.150-1-34a8cffa541c94af8232fe9af7a1f5ba) for kmod-tun
* pkg_hash_fetch_best_installation_candidate: Packages for kmod-tun found, but incompatible with the architectures configured
* opkg_install_cmd: Cannot install package kmod-tun.
więc co ja robię źle??
12 2024-07-02 19:21:46
Odp: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
Próbuje dojść co jest nie tak z tym Openvpn i na czystym obrazie chciałem zainstalować jednakże taki błąd się pojawia
onfiguring libopenssl3.
Configuring libopenssl-conf.
Generating engines.cnf
Generating providers.cnf
Configuring openssl-util.
Configuring openvpn-easy-rsa.
Collected errors:
* pkg_hash_check_unresolved: cannot find dependency kernel (= 5.15.150-1-34a8cffa541c94af8232fe9af7a1f5ba) for kmod-tun
* pkg_hash_fetch_best_installation_candidate: Packages for kmod-tun found, but incompatible with the architectures configured
* satisfy_dependencies_for: Cannot satisfy the following dependencies for openvpn-openssl:
* kernel (= 5.15.150-1-34a8cffa541c94af8232fe9af7a1f5ba)
* opkg_install_cmd: Cannot install package openvpn-openssl.
Być może dlatego nie działał mi poprawnie mój obraz jaki skompilowałem?
13 2024-06-26 19:53:18
Odp: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
taką. mam konfigurację
config openvpn 'home'
option enabled '1'
option dev 'tun0'
option port '1194'
option proto 'udp'
option keepalive '10 120'
option log '/tmp/openvpn.log'
option verb '3'
option ca '/etc/openvpn/ca.crt'
option cert '/etc/openvpn/serwer.crt'
option key '/etc/openvpn/serwer.key'
option server '10.8.0.0 255.255.255.0'
option dh '/etc/openvpn/dh2048.pem'
list push 'route 192.168.0.0 255.255.255.0'
list push 'redirect-gateway def1'
option topology 'subnet'
Czy przyczyną może być ze skopiowane ustawia z openwrt 21.03 na 23.0.3
14 2024-06-26 17:18:39
Odp: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
z tego co widziałem to niema w route route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default xx.xx.xx.xx.1 0.0.0.0 UG 0 0 0 eth0.2
xx.xx.xx.0 * 255.255.255.192 U 0 0 0 eth0.2
192.168.0.0 * 255.255.255.0 U 0 0 0 br-lan
15 2024-06-26 17:09:25
Odp: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
date
Wed Jun 26 16:08:43 UTC 2024
pytanie czy godzina też musi być poprawna ???
jak wyłączyć IP6
16 2024-06-25 21:13:58
Temat: brak połączenie OpenVpn (11 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Stworzyłem sobie obraz firmware z wgranym open VPN wraz z konfiguracją. Niestety niemotę się połączyć:
takie coś otrzymuje :
2024-06-25 20:05:26 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:26 192.168.0.181:54207 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2024-06-25 20:05:26 192.168.0.181:54207 TLS Error: TLS handshake failed
2024-06-25 20:05:26 192.168.0.181:54207 SIGUSR1[soft,tls-error] received, client-instance restarting
2024-06-25 20:05:27 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:27 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:28 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:29 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:30 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:31 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:32 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:33 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:34 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:35 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:36 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:36 192.168.0.181:51732 TLS: Initial packet from [AF_INET6]::ffff:192.168.0.181:51732, sid=b150cccd ded212f4
2024-06-25 20:05:36 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:36 192.168.0.181:57801 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2024-06-25 20:05:36 192.168.0.181:57801 TLS Error: TLS handshake failed
2024-06-25 20:05:36 192.168.0.181:57801 SIGUSR1[soft,tls-error] received, client-instance restarting
2024-06-25 20:05:37 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:38 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:39 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:39 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:40 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:41 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:41 read UDPv6 [NO-INFO]: Connection refused (code=146)
2024-06-25 20:05:42 read UDPv6 [NO-INFO]: Connection refused (code=146)
17 2024-06-21 08:54:39
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
ok, faktycznie jest ale w zupełnie innym miejscu
Dziękuję za pomoc. Wszystko się udało
18 2024-06-20 20:06:23
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
ok. dzięki. Dlaczego niema w DNSCrypt-Proxy a jest DNSCrypt-Proxy2 kompilerze
19 2024-06-20 17:34:34
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
no chyba nie
──(kali㉿kali)-[~/…/bin/targets/ath79/generic]
└─$ ls -al
total 18836
drwxr-xr-x 3 kali kali 4096 Jun 20 18:27 .
drwxr-xr-x 3 kali kali 4096 Jun 20 15:39 ..
-rw-r--r-- 1 kali kali 110 Jun 20 18:24 config.buildinfo
-rw-r--r-- 1 kali kali 268 Jun 20 18:24 feeds.buildinfo
-rw-r--r-- 1 kali kali 5417473 Jun 20 18:27 openwrt-ath79-generic-tplink_tl-wdr3600-v1-initramfs-kernel.bin
-rw-r--r-- 1 kali kali 3462 Jun 20 18:27 openwrt-ath79-generic-tplink_tl-wdr3600-v1.manifest
-rw-r--r-- 1 kali kali 8126464 Jun 20 18:27 openwrt-ath79-generic-tplink_tl-wdr3600-v1-squashfs-factory.bin
-rw-r--r-- 1 kali kali 5702458 Jun 20 18:27 openwrt-ath79-generic-tplink_tl-wdr3600-v1-squashfs-sysupgrade.bin
drwxr-xr-x 2 kali kali 4096 Jun 20 18:27 packages
-rw-r--r-- 1 kali kali 1716 Jun 20 18:28 profiles.json
-rw-r--r-- 1 kali kali 840 Jun 20 18:28 sha256sums
-rw-r--r-- 1 kali kali 18 Jun 20 18:24 version.buildinfo
20 2024-06-20 17:31:09
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
czy można w jakiś sposób zrobić aby nie powstawał plik dla factory ponieważ to on powoduje ze kompilator nie tworzy mi sysupgarde
21 2024-06-20 17:15:26
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
ok ale ja tylko dodałem OpenVpn oraz DNSCrypt-Proxy 2 plus zrobiłem "files"
22 2024-06-20 15:29:19
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
Cześć
Faktycznie miałeś rację z tym RAMem.
Pytanie 2
Dlaczego jak dodaje pakiety jakie ma zawierać obraz nie wtórzy mi się obraz tylko takie coś
┌──(kali㉿kali)-[~/…/bin/targets/ath79/generic]
└─$ ls
config.buildinfo packages
feeds.buildinfo profiles.json
openwrt-ath79-generic-tplink_tl-wdr3600-v1-initramfs-kernel.bin sha256sums
openwrt-ath79-generic-tplink_tl-wdr3600-v1.manifest version.buildinfo
23 2024-06-18 13:56:33
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
-Atmp-attrtab.cc -Dtmp-dfatab.cc -Ltmp-latencytab.cc
/bin/bash /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../move-if-change tmp-attrtab.cc insn-attrtab.cc
/bin/bash /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../move-if-change tmp-dfatab.cc insn-dfatab.cc
/bin/bash /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../move-if-change tmp-latencytab.cc insn-latencytab.cc
echo timestamp > s-attrtab
g++ -fno-PIE -c -O2 -I/home/kali/openwrt/staging_dir/host/include -pipe -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -Woverloaded-virtual -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/. -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../include -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libcpp/include -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libcody -I/home/kali/openwrt/staging_dir/host/include -I/home/kali/openwrt/staging_dir/host/include -I/home/kali/openwrt/staging_dir/host/include -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libdecnumber -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libdecnumber/dpd -I../libdecnumber -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libbacktrace -o insn-attrtab.o -MT insn-attrtab.o -MMD -MP -MF ./.deps/insn-attrtab.TPo insn-attrtab.cc
g++ -c -O2 -I/home/kali/openwrt/staging_dir/host/include -pipe -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -Woverloaded-virtual -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/build -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../include -I/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/../libcpp/include \
-o build/genautomata.o /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/genautomata.cc
g++ -O2 -I/home/kali/openwrt/staging_dir/host/include -pipe -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -Woverloaded-virtual -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -static-libstdc++ -static-libgcc -o build/genautomata \
build/genautomata.o build/rtl.o build/read-rtl.o build/ggc-none.o build/vec.o build/min-insn-modes.o build/gensupport.o build/print-rtl.o build/hash-table.o build/sort.o build/read-md.o build/errors.o ../build-x86_64-pc-linux-gnu/libiberty/libiberty.a -lm
build/genautomata /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/common.md /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/config/mips/mips.md \
insn-conditions.md > tmp-automata.cc
/bin/bash: line 2: 476349 Killed build/genautomata /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/common.md /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0/gcc/config/mips/mips.md insn-conditions.md > tmp-automata.cc
takie coś mam powyżej
taki problem mam cały czas niestety
24 2024-06-18 12:58:34
Odp: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
Zrobiłem jak napisałeś i niestety znów pojawił się błąd
_gcc-12.3.0_musl/gcc-12.3.0/gcc/config/mips/mips.md insn-conditions.md > tmp-automata.cc
make[5]: *** [Makefile:2473: s-automata] Error 137
make[5]: Leaving directory '/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0-initial/gcc'
make[4]: *** [Makefile:4598: all-gcc] Error 2
make[4]: Leaving directory '/home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0-initial'
make[3]: *** [Makefile:29: /home/kali/openwrt/build_dir/toolchain-mips_24kc_gcc-12.3.0_musl/gcc-12.3.0-initial/.built] Error 2
make[3]: Leaving directory '/home/kali/openwrt/toolchain/gcc/initial'
time: toolchain/gcc/initial/compile#403.82#62.81#2592.31
ERROR: toolchain/gcc/initial failed to build.
make[2]: *** [toolchain/Makefile:93: toolchain/gcc/initial/compile] Error 1
make[2]: Leaving directory '/home/kali/openwrt'
make[1]: *** [toolchain/Makefile:89: /home/kali/openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/stamp/.toolchain_compile] Error 2
make[1]: Leaving directory '/home/kali/openwrt'
make: *** [/home/kali/openwrt/include/toplevel.mk:232: world] Error 2
25 2024-06-18 10:16:30
Temat: brak niektórych bibliotek/kompilacja (15 odpowiedzi, napisanych Oprogramowanie / Software)
Witam
Próbuje skompilować sobie nowy obraz openwrt 23.0.5. niestety cały czas pojawia mi się komunikat o braku paru bibliotek
Collecting target info: done
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build dependency on 'libpam', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
Jak można je zainstalować. Próbowałam robić manualem z eko.one.pl jak i ze strony openwrt, a problem nadal ten sam.
Środowisko na którym to robie to Kali w najnowszej wersji postawiony na WMWare Fusion
Znalezione posty: 1 do 25 z 839
eko.one.pl → Posty przez modelos
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc