Cześć,
jak zabrać się do wymiany pendrive z extrootem na inny - bez utraty konfiguracji?
System CC, router 3420 + hub usb
Pozdr.
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 1 z 2)
eko.one.pl → Posty przez ruszomir
Znalezione posty: 1 do 25 z 35
1 2016-01-16 11:46:13
Temat: Wymiana nośnika z extrootem (1 odpowiedzi, napisanych Oprogramowanie / Software)
2 2016-01-12 20:44:11
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
1. rzeczywiście ifstatus wan_4 podaje pełne informacje. Jak jednak zrobić, aby było to widoczne w interfejsach Luci?
2. w fstab było domyślnie fstab.@global[0].check_fs='0', zatem przestawiam na 1 i powinno być auto check przy każdym boot?
Trochę OT, ale może spotkał się ktoś z Was - router (MR3420) raz na kilka rebootów zawiesza się na pierwszej fazie (zaraz po włączeniu, kiedy świeci się tylko power led i jeszcze nie zaczyna migać status led). Pomaga tylko dłuższe wyłączenie z prądu >2 minuty.
3 2016-01-12 19:36:01
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
A jeśli można: mam jeszcze dwie kwestie:
W zarówno w bannerze (po logowaniu ssh), jak i w Luci - nie ma informacji o połączeniu WAN - tak jakby bylo puste. To samo dzieje sie po ifstatus wan:
root@OpenWrt:/# ifstatus wan
{
"up": true,
"pending": false,
"available": true,
"autostart": true,
"dynamic": false,
"uptime": 125,
"l3_device": "wwan0",
"proto": "ncm",
"metric": 0,
"delegation": true,
"ipv4-address": [
],
"ipv6-address": [
],
"ipv6-prefix": [
],
"ipv6-prefix-assignment": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
],
"inactive": {
"ipv4-address": [
],
"ipv6-address": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
]
},
"data": {
}
}poprawny IP pokazuje tylko ifconfig:
root@OpenWrt:/# ifconfig
wwan0 Link encap:Ethernet HWaddr 00:1E:10:1F:00:00
inet addr:5.60.22.242 Bcast:5.60.22.243 Mask:255.255.255.252
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2254 errors:1580 dropped:0 overruns:0 frame:0
TX packets:1993 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1579877 (1.5 MiB) TX bytes:316905 (309.4 KiB)Nadałem już nazwę interfejsowi, ale dalej to nie wiem gdzie szukać
root@OpenWrt:/# uci show network.wan
network.wan=interface
network.wan.proto='ncm'
network.wan.device='/dev/ttyUSB0'
network.wan.apn='internet'
network.wan.ifname='wwan'A druga kwestia - czy można wymusić na starcie sprawdzanie spójności extroota? (u mnie sda1)?
4 2016-01-12 18:09:56
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary, udało się. Postanowiłem dać ostatnią szansę 3420. Czyli mamy hub + pendrive na extroot + modem - tak jak mówiłeś.
Ostatnio jak próbowałem to miałem jakąś chińską przelotkę i kartę microSD włożoną w tego huba i to powodowało problem. Na dobrym pendrive problemu już nie ma.
Jednakże transfery modemu w trybie NCM pozostawiają wiele do życzenia - mam między 4/1 a 5/1 Mbps, podczas gdy leżąca obok komórka u tego samego operatora ma 10/8 Mbps.
Poprawnie działa jednak telefon VOIP i nie mam problemu z SIP, które były na 3372 w trybie Hilink.
Coś za coś.
Dziękuję za dotychczasową pomoc.
Pozdr
5 2016-01-12 13:31:52
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Z extrootem już walczyliśmy razem i nawet Ty się poddałeś 
Przejrzałem forum i wydaje się, że Asus RT-N18U to dobry wybór i jest wspierany przez eko.one.pl - można spokojnie brać?
Pozdr.
6 2016-01-12 13:17:56
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Cóż, próba instalacji
chat comgt-ncm kmod-usb-net-huawei-cdc-ncm
kończy się informacją o braku miejsca - do tego jest mnóstwo zależności, które się instalują.
7 2016-01-12 13:09:17
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Spróbuję z Twoim obrazem i dam znać.
8 2016-01-12 13:06:20
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Router ma tylko 4MB flashu.
Całości kompilować nawet nie będę próbował.
Modeswitch jest niepotrzebny, bo modem jest przestawiony na stałe w tryb modemu oraz ma wyłączone cd/sd.
Wobec tego, jaka jest najmniejsza konfiguracja, aby ruszył ten Huawei w trybie NCM?
Wystarczą: chat comgt-ncm kmod-usb-net-huawei-cdc-ncm ?
9 2016-01-12 12:58:58
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Nie mogę użyć Twojego (pisałem w pierwszym poście), bo mi się nie mieszczą moduły do obsługi modemu.
A używam wersji h-153, z firmware s-153.
Jak mogę położyć tą łatkę na system - nigdy tego nie robiłem?
10 2016-01-12 12:06:08
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Zainstalowałem, bez zmian.
Przełączenie na ttyUSB0 też nie pomogło, zachowuje się tak samo jak na cdc-wdm0. Na ttyUSB1 nie łączy modemu.
Wypatrzyłem w logach:
huawei_cdc_ncm 1-1:1.2 wwan0: kevent 12 may have been dropped
Tue Jan 12 10:52:46 2016 daemon.notice netifd: wan (1133): sending -> ATV1
Tue Jan 12 10:52:46 2016 daemon.warn odhcpd[996]: DHCPV6 SOLICIT IA_NA from 000100011d24d22500155d010700 on br-lan: ok fde6:44f6:aa2b::ecd/128
Tue Jan 12 10:52:46 2016 daemon.warn odhcpd[996]: DHCPV6 REQUEST IA_NA from 000100011d24d22500155d010700 on br-lan: ok fde6:44f6:aa2b::ecd/128
Tue Jan 12 10:52:47 2016 daemon.notice netifd: wan (1133): sending -> ATE1
Tue Jan 12 10:52:47 2016 daemon.info dnsmasq-dhcp[1206]: DHCPREQUEST(br-lan) 192.168.1.225 00:15:5d:01:0c:01
Tue Jan 12 10:52:47 2016 daemon.info dnsmasq-dhcp[1206]: DHCPACK(br-lan) 192.168.1.225 00:15:5d:01:0c:01 DEV
Tue Jan 12 10:52:47 2016 daemon.notice netifd: wan (1133): sending -> ATS0=0
Tue Jan 12 10:52:48 2016 daemon.info dnsmasq-dhcp[1206]: DHCPREQUEST(br-lan) 192.168.1.102 a0:d3:c1:6f:6e:a8
Tue Jan 12 10:52:48 2016 daemon.info dnsmasq-dhcp[1206]: DHCPACK(br-lan) 192.168.1.102 a0:d3:c1:6f:6e:a8 SRHP
Tue Jan 12 10:52:48 2016 daemon.notice netifd: wan (1133): sending -> AT^NDISDUP=1,1,"internet"
Tue Jan 12 10:52:49 2016 daemon.notice netifd: wan (1133): Connected, starting DHCP
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan' is now up
Tue Jan 12 10:52:49 2016 kern.err kernel: [ 29.790000] huawei_cdc_ncm 1-1:1.2 wwan0: kevent 12 may have been dropped
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Network device 'wwan0' link is up
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Network alias 'wwan0' link is up
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_4' is enabled
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_4' is setting up now
Tue Jan 12 10:52:49 2016 daemon.notice netifd: wan (1133): Command failed: Unknown error
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_6' is enabled
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_6' has link connectivity
Tue Jan 12 10:52:49 2016 daemon.notice netifd: Interface 'wan_6' is setting up now
Tue Jan 12 10:52:49 2016 daemon.notice netifd: wan (1133): Command failed: Unknown error
Tue Jan 12 10:52:49 2016 daemon.notice netifd: wan_4 (1294): udhcpc (v1.23.2) started
Tue Jan 12 10:52:49 2016 daemon.notice netifd: wan_4 (1294): Sending discover...
Tue Jan 12 10:52:50 2016 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Tue Jan 12 10:52:52 2016 daemon.notice netifd: wan_4 (1294): Sending discover...
Tue Jan 12 10:52:55 2016 daemon.notice netifd: wan_4 (1294): Sending discover...sekcja wan z /etc/config/network:
config interface 'wan'
option proto 'ncm'
option device '/dev/ttyUSB0'
option apn 'internet'11 2016-01-12 11:14:29
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Nie ma sensu zmieniać cdc-wdm0 na ttyUSB0, bo nie mam takiego portu.
root@OpenWrt:/# ifstatus wan
{
"up": true,
"pending": false,
"available": true,
"autostart": true,
"uptime": 4383,
"l3_device": "wwan0",
"proto": "ncm",
"metric": 0,
"delegation": true,
"ipv4-address": [
],
"ipv6-address": [
],
"ipv6-prefix": [
],
"ipv6-prefix-assignment": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
],
"inactive": {
"ipv4-address": [
],
"ipv6-address": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
]
},
"data": {
}
}12 2016-01-12 10:31:42
Odp: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Brakuje mi jakiegoś modułu ?
Bo modem i karta sim są sprawne - po podłączeniu do kompa działają "od kopa" bez sterowników.
13 2016-01-12 10:20:44
Temat: Huawei E3372 w trybie NCM (79 odpowiedzi, napisanych Oprogramowanie / Software)
Poproszę pomoc - utknąłem.
Modem jest w wersji nie Highlink, zmodyfikowany tutorialem - http://blog.asiantuntijakaveri.fi/2015/ … -from.html
Na routerze MR3420 z racji braku miejsca zainstalowałem niemodowany firmware Openwrt (openwrt-15.05-ar71xx-generic-tl-mr3420-v2).
Zainstalowałem obsługę modemu http://eko.one.pl/?p=openwrt-3g#obsugam … ehuaweincm.
Modem się uruchamia, nawiązuje połączenie z siecią, pojawia się interfejs wwan0, występuje na nim ruch, ale nie mogę zapingować na zewnątrze - nie mam go w routingu nawet. Mam wrażenie, że brakuje jakiegoś elementu spinającego całość.
Zerknijcie plz na konfigurację.
root@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr F8:1A:67:B5:3D:06
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::fa1a:67ff:feb5:3d06/64 Scope:Link
inet6 addr: fde6:44f6:aa2b::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:540 errors:0 dropped:0 overruns:0 frame:0
TX packets:203 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:59946 (58.5 KiB) TX bytes:60461 (59.0 KiB)
eth1 Link encap:Ethernet HWaddr F8:1A:67:B5:3D:06
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639 errors:0 dropped:33 overruns:0 frame:0
TX packets:221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:78728 (76.8 KiB) TX bytes:62041 (60.5 KiB)
Interrupt:5
wwan0 Link encap:Ethernet HWaddr 00:1E:10:1F:00:00
inet6 addr: fe80::21e:10ff:fe1f:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3014 (2.9 KiB) TX bytes:15688 (15.3 KiB)root@OpenWrt:/# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fde6:44f6:aa2b::/48'
network.lan=interface
network.lan.ifname='eth1'
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0 1 2 3 4'
network.wan=interface
network.wan.proto='ncm'
network.wan.device='/dev/cdc-wdm0'
network.wan.apn='internet'root@OpenWrt:/# dmesg
[ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015
[ 0.000000] Memory: 28516K/32768K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4252K reserved)
[ 4.470000] usbcore: registered new interface driver usbfs
[ 4.470000] usbcore: registered new interface driver hub
[ 4.480000] usbcore: registered new device driver usb
[ 4.490000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.500000] ehci-platform: EHCI generic platform driver
[ 4.500000] ehci-platform ehci-platform: EHCI Host Controller
[ 4.510000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.520000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.540000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.540000] hub 1-0:1.0: USB hub found
[ 4.550000] hub 1-0:1.0: 1 port detected
[ 5.180000] init: - preinit -
[ 5.870000] random: procd urandom read with 9 bits of entropy available
[ 7.450000] eth1: link up (1000Mbps/Full duplex)
[ 10.760000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.010000] procd: - init -
[ 12.780000] NET: Registered protocol family 10
[ 12.790000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.810000] usbcore: registered new interface driver cdc_wdm
[ 12.910000] usbcore: registered new interface driver cdc_ncm
[ 13.070000] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
[ 13.080000] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
[ 13.100000] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
[ 13.100000] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
[ 13.120000] usbcore: registered new interface driver huawei_cdc_ncm
[ 13.190000] PPP generic driver version 2.4.2
[ 13.200000] NET: Registered protocol family 24
[ 22.750000] device eth1 entered promiscuous mode
[ 22.760000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 24.350000] eth1: link up (1000Mbps/Full duplex)
[ 24.350000] br-lan: port 1(eth1) entered forwarding state
[ 24.360000] br-lan: port 1(eth1) entered forwarding state
[ 24.360000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 26.360000] br-lan: port 1(eth1) entered forwarding state
[ 29.580000] huawei_cdc_ncm 1-1:1.2 wwan0: kevent 12 may have been dropped
[ 63.820000] random: nonblocking pool is initialized14 2016-01-07 08:26:54
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
Niestety u mnie extroot nie działa poprawnie - sprawę sobie odpuściłem.
Dziękuję za dotychczasową pomoc.
15 2016-01-05 23:33:50
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
zatem coś z tym da się zrobić?
jeśli nie - dajmy sobie spokój. Kupię nowy router. Szkoda Twojego i mojego czasu
16 2016-01-05 23:07:02
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
Walka trwa
root@OpenWrt:/# cat /sbin/block
#!/bin/sh
/tmp/overlay/sbin/usbmode -s -c /tmp/overlay/etc/usb-mode.json
sleep 20
exec /sbin/block_/block $*root@OpenWrt:/# ls -al /sbin/bl*
-rwxr-xr-x 1 root root 109 Jan 5 22:50 /sbin/block
/sbin/block_:
drwxr-xr-x 2 root root 0 Jan 5 20:28 .
drwxr-xr-x 1 root root 0 Jan 5 20:28 ..
-rwxr-xr-x 1 root root 19416 Nov 27 20:37 block17 2016-01-05 22:56:17
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
zrobiłem, długo się odpalał...
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 3.18.23 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46943) ) #7 Fri Nov 27 20:39:57 CET 2015
[ 0.000000] MyLoader: sysp=e72c40a6, boardp=3050a00a, parts=15d661ab
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9341 rev 1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 8038a2b0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-MR3420-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28260K/32768K available (2649K kernel code, 134K rwdata, 552K rodata, 240K init, 194K bss, 4508K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-MR3420 v2
[ 0.560000] Switched to clocksource MIPS
[ 0.560000] NET: Registered protocol family 2
[ 0.570000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.580000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.580000] TCP: reno registered
[ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 32
[ 0.600000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.650000] msgmni has been set to 55
[ 0.650000] io scheduler noop registered
[ 0.660000] io scheduler deadline registered (default)
[ 0.660000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.670000] console [ttyS0] disabled
[ 0.690000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.700000] console [ttyS0] enabled
[ 0.710000] bootconsole [early0] disabled
[ 0.720000] m25p80 spi0.0: found s25sl032p, expected m25p80
[ 0.730000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[ 0.740000] 5 tp-link partitions found on MTD device spi0.0
[ 0.740000] Creating 5 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.750000] 0x000000020000-0x000000145c18 : "kernel"
[ 0.760000] 0x000000145c18-0x0000003f0000 : "rootfs"
[ 0.760000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.770000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.780000] 0x000000390000-0x0000003f0000 : "rootfs_data"
[ 0.790000] 0x0000003f0000-0x000000400000 : "art"
[ 0.790000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.810000] libphy: ag71xx_mdio: probed
[ 1.410000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[ 1.420000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.010000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.050000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.060000] TCP: cubic registered
[ 2.060000] NET: Registered protocol family 17
[ 2.070000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.080000] Bridge firewalling registered
[ 2.080000] 8021q: 802.1Q VLAN Support v1.8
[ 2.090000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.110000] Freeing unused kernel memory: 240K (803a4000 - 803e0000)
[ 3.180000] init: Console is alive
[ 3.180000] init: - watchdog -
[ 4.850000] usbcore: registered new interface driver usbfs
[ 4.850000] usbcore: registered new interface driver hub
[ 4.860000] usbcore: registered new device driver usb
[ 4.910000] SCSI subsystem initialized
[ 4.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.930000] ehci-platform: EHCI generic platform driver
[ 4.930000] ehci-platform ehci-platform: EHCI Host Controller
[ 4.940000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.950000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.980000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.980000] hub 1-0:1.0: USB hub found
[ 4.990000] hub 1-0:1.0: 1 port detected
[ 4.990000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.000000] ohci-platform: OHCI generic platform driver
[ 5.010000] usbcore: registered new interface driver usb-storage
[ 5.230000] init: - preinit -
[ 5.870000] random: procd urandom read with 9 bits of entropy available
[ 7.450000] eth1: link up (1000Mbps/Full duplex)
[ 9.090000] mount_root: loading kmods from internal overlay
[ 9.350000] jffs2: notice: (391) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 9.370000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 9.380000] block: extroot: device not present, retrying in 5 seconds
[ 11.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.370000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 11.370000] scsi host0: usb-storage 1-1:1.0
[ 12.380000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 12.390000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 12.410000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 14.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 14.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.420000] sda: sda1
[ 14.430000] block: extroot: cannot find device with UUID 00649b4c-bb6f-4043-98b3-396480d1c553
[ 14.480000] jffs2: notice: (388) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 14.500000] mount_root: loading kmods from internal overlay
[ 34.580000] mount_root: switching to jffs2 overlay
[ 34.620000] eth1: link down
[ 34.630000] procd: - early -
[ 34.640000] procd: - watchdog -
[ 35.450000] procd: - ubus -
[ 36.460000] procd: - init -
[ 37.330000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[ 37.340000] Backport generated by backports.git backports-20150129-0-gdd4a670
[ 37.350000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
[ 37.400000] xt_time: kernel timezone is -0000
[ 37.410000] usbcore: registered new interface driver cdc_ether
[ 37.450000] cfg80211: Calling CRDA to update world regulatory domain
[ 37.450000] cfg80211: World regulatory domain updated:
[ 37.460000] cfg80211: DFS Master region: unset
[ 37.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 37.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 37.480000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 37.490000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 37.500000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 37.510000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 37.520000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 37.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 37.530000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 37.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.600000] PPP generic driver version 2.4.2
[ 37.610000] NET: Registered protocol family 24
[ 37.670000] ath: EEPROM regdomain: 0x0
[ 37.670000] ath: EEPROM indicates default country code should be used
[ 37.670000] ath: doing EEPROM country->regdmn map search
[ 37.670000] ath: country maps to regdmn code: 0x3a
[ 37.670000] ath: Country alpha2 being used: US
[ 37.670000] ath: Regpair used: 0x3a
[ 37.680000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 37.690000] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=47
[ 37.700000] cfg80211: Calling CRDA for country: US
[ 37.700000] cfg80211: Regulatory domain changed to country: US
[ 37.710000] cfg80211: DFS Master region: FCC
[ 37.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 37.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 37.730000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 37.740000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 37.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 37.760000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 42.170000] sd 0:0:0:1: [sda] Synchronizing SCSI cache
[ 42.200000] usb 1-1: USB disconnect, device number 2
[ 42.830000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 43.160000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 43.180000] usb-storage 1-1:1.2: USB Mass Storage device detected
[ 43.190000] scsi host1: usb-storage 1-1:1.2
[ 43.550000] device eth1 entered promiscuous mode
[ 43.570000] cdc_ether 1-1:1.0 eth2: kevent 12 may have been dropped
[ 44.200000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 44.230000] sd 1:0:0:0: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 44.240000] sd 1:0:0:0: [sda] Write Protect is off
[ 44.240000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 44.240000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 44.260000] sda: sda1
[ 44.280000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 44.500000] cfg80211: Calling CRDA for country: PL
[ 44.500000] cfg80211: Regulatory domain changed to country: PL
[ 44.510000] cfg80211: DFS Master region: ETSI
[ 44.510000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 44.520000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 44.530000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 44.540000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 44.550000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 44.560000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 45.200000] eth1: link up (1000Mbps/Full duplex)
[ 45.200000] br-lan: port 1(eth1) entered forwarding state
[ 45.210000] br-lan: port 1(eth1) entered forwarding state
[ 47.210000] br-lan: port 1(eth1) entered forwarding state
[ 47.340000] wlan0: authenticate with f8:8e:85:a5:a1:f4
[ 47.360000] wlan0: send auth to f8:8e:85:a5:a1:f4 (try 1/3)
[ 47.370000] wlan0: authenticated
[ 47.380000] wlan0: associate with f8:8e:85:a5:a1:f4 (try 1/3)
[ 47.380000] wlan0: RX AssocResp from f8:8e:85:a5:a1:f4 (capab=0x411 status=0 aid=1)
[ 47.390000] wlan0: associated
[ 50.720000] random: nonblocking pool is initialized
root@OpenWrt:/#logread
root@OpenWrt:/# logread
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.940000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.950000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.980000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.980000] hub 1-0:1.0: USB hub found
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.990000] hub 1-0:1.0: 1 port detected
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 4.990000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 5.000000] ohci-platform: OHCI generic platform driver
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 5.010000] usbcore: registered new interface driver usb-storage
Tue Jan 5 22:49:58 2016 user.info kernel: [ 5.230000] init: - preinit -
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 5.870000] random: procd urandom read with 9 bits of entropy available
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 7.450000] eth1: link up (1000Mbps/Full duplex)
Tue Jan 5 22:49:58 2016 user.info kernel: [ 9.090000] mount_root: loading kmods from internal overlay
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 9.350000] jffs2: notice: (391) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Jan 5 22:49:58 2016 user.info kernel: [ 9.370000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Tue Jan 5 22:49:58 2016 user.info kernel: [ 9.380000] block: extroot: device not present, retrying in 5 seconds
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 11.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 11.370000] usb-storage 1-1:1.0: USB Mass Storage device detected
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 11.370000] scsi host0: usb-storage 1-1:1.0
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 12.380000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 12.390000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 12.410000] sd 0:0:0:1: [sda] Attached SCSI removable disk
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 14.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 14.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 14.420000] sda: sda1
Tue Jan 5 22:49:58 2016 user.err kernel: [ 14.430000] block: extroot: cannot find device with UUID 00649b4c-bb6f-4043-98b3-396480d1c553
Tue Jan 5 22:49:58 2016 kern.notice kernel: [ 14.480000] jffs2: notice: (388) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Jan 5 22:49:58 2016 user.info kernel: [ 14.500000] mount_root: loading kmods from internal overlay
Tue Jan 5 22:49:58 2016 user.info kernel: [ 34.580000] mount_root: switching to jffs2 overlay
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 34.620000] eth1: link down
Tue Jan 5 22:49:58 2016 user.info kernel: [ 34.630000] procd: - early -
Tue Jan 5 22:49:58 2016 user.info kernel: [ 34.640000] procd: - watchdog -
Tue Jan 5 22:49:58 2016 user.info kernel: [ 35.450000] procd: - ubus -
Tue Jan 5 22:49:58 2016 user.info kernel: [ 36.460000] procd: - init -
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.330000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.340000] Backport generated by backports.git backports-20150129-0-gdd4a670
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.350000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.400000] xt_time: kernel timezone is -0000
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.410000] usbcore: registered new interface driver cdc_ether
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.450000] cfg80211: Calling CRDA to update world regulatory domain
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.450000] cfg80211: World regulatory domain updated:
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.460000] cfg80211: DFS Master region: unset
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.480000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.490000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.500000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.510000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.520000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.530000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.600000] PPP generic driver version 2.4.2
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.610000] NET: Registered protocol family 24
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: EEPROM regdomain: 0x0
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: EEPROM indicates default country code should be used
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: doing EEPROM country->regdmn map search
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: country maps to regdmn code: 0x3a
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: Country alpha2 being used: US
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.670000] ath: Regpair used: 0x3a
Tue Jan 5 22:49:58 2016 kern.debug kernel: [ 37.680000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.690000] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=47
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.700000] cfg80211: Calling CRDA for country: US
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.700000] cfg80211: Regulatory domain changed to country: US
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.710000] cfg80211: DFS Master region: FCC
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.730000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.740000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Tue Jan 5 22:49:58 2016 kern.info kernel: [ 37.760000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Jan 5 22:50:00 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Tue Jan 5 22:50:00 2016 user.emerg syslog: /sbin/block: line 2: /tmp/overlay/sbin/usbmode: not found
Tue Jan 5 22:50:00 2016 kern.notice kernel: [ 42.170000] sd 0:0:0:1: [sda] Synchronizing SCSI cache
Tue Jan 5 22:50:01 2016 kern.info kernel: [ 42.200000] usb 1-1: USB disconnect, device number 2
Tue Jan 5 22:50:01 2016 kern.info kernel: [ 42.830000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Tue Jan 5 22:50:01 2016 kern.info kernel: [ 43.160000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Tue Jan 5 22:50:02 2016 kern.info kernel: [ 43.180000] usb-storage 1-1:1.2: USB Mass Storage device detected
Tue Jan 5 22:50:02 2016 kern.info kernel: [ 43.190000] scsi host1: usb-storage 1-1:1.2
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'lan' is enabled
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'lan' is setting up now
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'lan' is now up
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'loopback' is enabled
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'loopback' is now up
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'wan6' is enabled
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Network device 'lo' link is up
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Network device 'eth2' link is up
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Jan 5 22:50:02 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Jan 5 22:50:02 2016 kern.info kernel: [ 43.550000] device eth1 entered promiscuous mode
Tue Jan 5 22:50:02 2016 kern.err kernel: [ 43.570000] cdc_ether 1-1:1.0 eth2: kevent 12 may have been dropped
Tue Jan 5 22:50:02 2016 daemon.notice netifd: wan (916): udhcpc (v1.23.2) started
Tue Jan 5 22:50:02 2016 daemon.notice netifd: wan (916): Sending discover...
Tue Jan 5 22:50:03 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Jan 5 22:50:03 2016 kern.notice kernel: [ 44.200000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Tue Jan 5 22:50:03 2016 kern.notice kernel: [ 44.230000] sd 1:0:0:0: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
Tue Jan 5 22:50:03 2016 kern.notice kernel: [ 44.240000] sd 1:0:0:0: [sda] Write Protect is off
Tue Jan 5 22:50:03 2016 kern.debug kernel: [ 44.240000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
Tue Jan 5 22:50:03 2016 kern.notice kernel: [ 44.240000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.260000] sda: sda1
Tue Jan 5 22:50:03 2016 kern.notice kernel: [ 44.280000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.500000] cfg80211: Calling CRDA for country: PL
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.500000] cfg80211: Regulatory domain changed to country: PL
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.510000] cfg80211: DFS Master region: ETSI
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.510000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.520000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.530000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.540000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.550000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
Tue Jan 5 22:50:03 2016 kern.info kernel: [ 44.560000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Jan 5 22:50:03 2016 daemon.notice netifd: Network device 'eth2' link is down
Tue Jan 5 22:50:03 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Jan 5 22:50:03 2016 daemon.notice netifd: wan (916): Received SIGTERM
Tue Jan 5 22:50:04 2016 kern.info kernel: [ 45.200000] eth1: link up (1000Mbps/Full duplex)
Tue Jan 5 22:50:04 2016 kern.info kernel: [ 45.200000] br-lan: port 1(eth1) entered forwarding state
Tue Jan 5 22:50:04 2016 kern.info kernel: [ 45.210000] br-lan: port 1(eth1) entered forwarding state
Tue Jan 5 22:50:04 2016 daemon.notice netifd: Network device 'eth1' link is up
Tue Jan 5 22:50:04 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Jan 5 22:50:04 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Jan 5 22:50:04 2016 daemon.notice netifd: radio0 (898): Successfully initialized wpa_supplicant
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.210000] br-lan: port 1(eth1) entered forwarding state
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.340000] wlan0: authenticate with f8:8e:85:a5:a1:f4
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.360000] wlan0: send auth to f8:8e:85:a5:a1:f4 (try 1/3)
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.370000] wlan0: authenticated
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.380000] wlan0: associate with f8:8e:85:a5:a1:f4 (try 1/3)
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.380000] wlan0: RX AssocResp from f8:8e:85:a5:a1:f4 (capab=0x411 status=0 aid=1)
Tue Jan 5 22:50:06 2016 kern.info kernel: [ 47.390000] wlan0: associated
Tue Jan 5 22:50:06 2016 daemon.notice netifd: Network device 'eth2' link is up
Tue Jan 5 22:50:06 2016 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Jan 5 22:50:06 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: started, version 2.73 cachesize 150
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: DNS service limited to local subnets
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq-dhcp[1089]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: using local addresses only for domain lan
Tue Jan 5 22:50:06 2016 daemon.warn dnsmasq[1089]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: read /etc/hosts - 1 addresses
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq[1089]: read /tmp/hosts/dhcp - 1 addresses
Tue Jan 5 22:50:06 2016 daemon.info dnsmasq-dhcp[1089]: read /etc/ethers - 0 addresses
Tue Jan 5 22:50:06 2016 daemon.notice netifd: wan (1109): udhcpc (v1.23.2) started
Tue Jan 5 22:50:06 2016 daemon.notice netifd: wan (1109): Sending discover...
Tue Jan 5 22:50:06 2016 daemon.notice netifd: wan (1109): Sending select for 192.168.8.100...
Tue Jan 5 22:50:06 2016 daemon.notice netifd: wan (1109): Lease of 192.168.8.100 obtained, lease time 86400
Tue Jan 5 22:50:07 2016 daemon.notice netifd: Interface 'wan' is now up
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1089]: reading /tmp/resolv.conf.auto
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1089]: using local addresses only for domain lan
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1089]: using nameserver 192.168.8.1#53
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1089]: using nameserver 192.168.8.1#53
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1089]: exiting on receipt of SIGTERM
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: started, version 2.73 cachesize 150
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: DNS service limited to local subnets
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq-dhcp[1163]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: using local addresses only for domain lan
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: reading /tmp/resolv.conf.auto
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: using local addresses only for domain lan
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: using nameserver 192.168.8.1#53
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: using nameserver 192.168.8.1#53
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: read /etc/hosts - 1 addresses
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq[1163]: read /tmp/hosts/dhcp - 1 addresses
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq-dhcp[1163]: read /etc/ethers - 0 addresses
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq-dhcp[1163]: DHCPREQUEST(br-lan) 192.168.2.102 a0:d3:c1:6f:6e:a8
Tue Jan 5 22:50:07 2016 daemon.info dnsmasq-dhcp[1163]: DHCPACK(br-lan) 192.168.2.102 a0:d3:c1:6f:6e:a8 SRHP
Tue Jan 5 22:50:07 2016 daemon.warn dnsmasq[1163]: possible DNS-rebind attack detected: mtalk.google.com
Tue Jan 5 22:50:07 2016 daemon.warn dnsmasq[1163]: possible DNS-rebind attack detected: win8.ipv6.microsoft.com
Tue Jan 5 22:50:07 2016 daemon.warn dnsmasq[1163]: possible DNS-rebind attack detected: orsp.f-secure.com
Tue Jan 5 22:50:07 2016 daemon.warn dnsmasq[1163]: possible DNS-rebind attack detected: [url=http://www.google.com]www.google.com[/url]
Tue Jan 5 22:50:08 2016 user.notice firewall: Reloading firewall due to ifup of wan (eth2)
Tue Jan 5 22:50:09 2016 kern.notice kernel: [ 50.720000] random: nonblocking pool is initialized
Tue Jan 5 22:50:20 2016 daemon.err block: /dev/mtdblock3 is already mounted
Tue Jan 5 22:50:21 2016 cron.info crond[1250]: crond (busybox 1.23.2) started, log level 5
Tue Jan 5 22:50:21 2016 authpriv.info dropbear[1264]: Not backgrounding
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led WAN
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led LAN1
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led LAN2
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led LAN3
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led LAN4
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led WLAN
Tue Jan 5 22:50:22 2016 user.emerg syslog: setting up led USB
Tue Jan 5 22:50:22 2016 daemon.info procd: - init complete -i znowu błędy
[ 14.430000] block: extroot: cannot find device with UUID 00649b4c-bb6f-4043-98b3-396480d1c55318 2016-01-05 22:42:46
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
obraz:
openwrt-15.05-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bininstalowane przez
sysupgrage -n x.binfstab:
root@OpenWrt:/mnt# uci show fstab
fstab.@global[0]=global
fstab.@global[0].anon_swap='0'
fstab.@global[0].anon_mount='0'
fstab.@global[0].auto_swap='1'
fstab.@global[0].auto_mount='1'
fstab.@global[0].delay_root='15'
fstab.@global[0].check_fs='0'
fstab.@mount[0]=mount
fstab.@mount[0].device='/dev/sda1'
fstab.@mount[0].target='/overlay'
fstab.@mount[0].enabled='1'dmesg:
root@OpenWrt:/mnt# dmesg
[ 0.000000] Linux version 3.18.23 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46943) ) #7 Fri Nov 27 20:39:57 CET 2015
[ 0.000000] MyLoader: sysp=e72c40a6, boardp=3050a00a, parts=15d661ab
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9341 rev 1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 8038a2b0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-MR3420-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28260K/32768K available (2649K kernel code, 134K rwdata, 552K rodata, 240K init, 194K bss, 4508K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-MR3420 v2
[ 0.560000] Switched to clocksource MIPS
[ 0.560000] NET: Registered protocol family 2
[ 0.570000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.580000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.580000] TCP: reno registered
[ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 32
[ 0.600000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.650000] msgmni has been set to 55
[ 0.650000] io scheduler noop registered
[ 0.660000] io scheduler deadline registered (default)
[ 0.660000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.670000] console [ttyS0] disabled
[ 0.700000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.700000] console [ttyS0] enabled
[ 0.710000] bootconsole [early0] disabled
[ 0.720000] m25p80 spi0.0: found s25sl032p, expected m25p80
[ 0.730000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[ 0.740000] 5 tp-link partitions found on MTD device spi0.0
[ 0.740000] Creating 5 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.750000] 0x000000020000-0x000000145c18 : "kernel"
[ 0.760000] 0x000000145c18-0x0000003f0000 : "rootfs"
[ 0.770000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.770000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.780000] 0x000000390000-0x0000003f0000 : "rootfs_data"
[ 0.790000] 0x0000003f0000-0x000000400000 : "art"
[ 0.790000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.820000] libphy: ag71xx_mdio: probed
[ 1.410000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
[ 1.420000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.010000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.050000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.060000] TCP: cubic registered
[ 2.060000] NET: Registered protocol family 17
[ 2.070000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.080000] Bridge firewalling registered
[ 2.080000] 8021q: 802.1Q VLAN Support v1.8
[ 2.090000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.110000] Freeing unused kernel memory: 240K (803a4000 - 803e0000)
[ 3.180000] init: Console is alive
[ 3.180000] init: - watchdog -
[ 4.850000] usbcore: registered new interface driver usbfs
[ 4.850000] usbcore: registered new interface driver hub
[ 4.860000] usbcore: registered new device driver usb
[ 4.910000] SCSI subsystem initialized
[ 4.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.930000] ehci-platform: EHCI generic platform driver
[ 4.930000] ehci-platform ehci-platform: EHCI Host Controller
[ 4.940000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.950000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.980000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.980000] hub 1-0:1.0: USB hub found
[ 4.990000] hub 1-0:1.0: 1 port detected
[ 4.990000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.000000] ohci-platform: OHCI generic platform driver
[ 5.010000] usbcore: registered new interface driver usb-storage
[ 5.230000] init: - preinit -
[ 5.870000] random: procd urandom read with 9 bits of entropy available
[ 7.950000] eth1: link up (1000Mbps/Full duplex)
[ 9.090000] mount_root: loading kmods from internal overlay
[ 9.350000] jffs2: notice: (391) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 9.370000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 9.380000] block: extroot: device not present, retrying in 15 seconds
[ 11.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.420000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 11.430000] scsi host0: usb-storage 1-1:1.0
[ 12.430000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 12.440000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 12.460000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 24.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 24.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.420000] sda: sda1
[ 24.430000] block: extroot: cannot find device sda1
[ 24.470000] jffs2: notice: (388) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 24.490000] mount_root: loading kmods from internal overlay
[ 54.630000] mount_root: switching to jffs2 overlay
[ 54.670000] eth1: link down
[ 54.690000] procd: - early -
[ 54.690000] procd: - watchdog -
[ 55.500000] procd: - ubus -
[ 56.510000] procd: - init -
[ 56.760000] random: nonblocking pool is initialized
[ 58.450000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[ 58.460000] Backport generated by backports.git backports-20150129-0-gdd4a670
[ 58.470000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
[ 58.520000] xt_time: kernel timezone is -0000
[ 58.530000] usbcore: registered new interface driver cdc_ether
[ 58.570000] cfg80211: Calling CRDA to update world regulatory domain
[ 58.570000] cfg80211: World regulatory domain updated:
[ 58.580000] cfg80211: DFS Master region: unset
[ 58.580000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 58.590000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.600000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.610000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.620000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.630000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 58.640000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 58.650000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.650000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 58.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.760000] PPP generic driver version 2.4.2
[ 58.770000] NET: Registered protocol family 24
[ 58.830000] ath: EEPROM regdomain: 0x0
[ 58.830000] ath: EEPROM indicates default country code should be used
[ 58.830000] ath: doing EEPROM country->regdmn map search
[ 58.830000] ath: country maps to regdmn code: 0x3a
[ 58.830000] ath: Country alpha2 being used: US
[ 58.830000] ath: Regpair used: 0x3a
[ 58.850000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 58.850000] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=47
[ 58.860000] cfg80211: Calling CRDA for country: US
[ 58.860000] cfg80211: Regulatory domain changed to country: US
[ 58.870000] cfg80211: DFS Master region: FCC
[ 58.870000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 58.880000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 58.890000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 58.900000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 58.910000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 58.920000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 63.560000] sd 0:0:0:1: [sda] Synchronizing SCSI cache
[ 63.590000] usb 1-1: USB disconnect, device number 2
[ 64.480000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 64.840000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 64.860000] usb-storage 1-1:1.2: USB Mass Storage device detected
[ 64.870000] scsi host1: usb-storage 1-1:1.2
[ 65.870000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 65.880000] sd 1:0:0:0: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 65.900000] sd 1:0:0:0: [sda] Write Protect is off
[ 65.900000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 65.900000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.930000] sda: sda1
[ 65.960000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 66.880000] device eth1 entered promiscuous mode
[ 66.910000] cdc_ether 1-1:1.0 eth2: kevent 12 may have been dropped
[ 67.720000] cfg80211: Calling CRDA for country: PL
[ 67.750000] cfg80211: Regulatory domain changed to country: PL
[ 67.760000] cfg80211: DFS Master region: ETSI
[ 67.760000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 67.770000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 67.780000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 67.790000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 67.800000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 67.810000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 68.520000] eth1: link up (1000Mbps/Full duplex)
[ 68.520000] br-lan: port 1(eth1) entered forwarding state
[ 68.530000] br-lan: port 1(eth1) entered forwarding state
[ 70.530000] br-lan: port 1(eth1) entered forwarding state
[ 72.400000] wlan0: authenticate with f8:8e:85:a5:a1:f4
[ 72.420000] wlan0: send auth to f8:8e:85:a5:a1:f4 (try 1/3)
[ 72.430000] wlan0: authenticated
[ 72.440000] wlan0: associate with f8:8e:85:a5:a1:f4 (try 1/3)
[ 72.520000] wlan0: RX AssocResp from f8:8e:85:a5:a1:f4 (capab=0x411 status=0 aid=1)
[ 72.530000] wlan0: associated
[ 659.940000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 659.950000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 659.980000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)19 2016-01-05 22:26:10
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
tutaj
root@OpenWrt:/mnt# cat /sbin/block
#!/bin/sh
/tmp/overlay/sbin/usbmode -s -c /tmp/overlay/etc/usb-mode.json
/sbin/block_/block info >> /tmp/a.txt
for i in 1 2 3 4 5 6 7 8 9 10; do
[ -e /dev/sda1 ] && break
sleep 3
done
exec /sbin/block_/block $*20 2016-01-05 22:20:07
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
już zrobilem, proszę
root@OpenWrt:/mnt# cat /tmp/a.txt
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"21 2016-01-05 22:16:38
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
* zwiększyłem sleep do 3
* fstab.@global[0].delay_root='15'
* fstab.@mount[0].device='/dev/sda1'
wszystko bez efektu...
Cezary, chcesz spróbować zrobić to samemu? Mogę zrobić Ci dostęp do ssh po wan i sam zerkniesz?
Pozdr
22 2016-01-05 21:45:06
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
block info widzi:
root@OpenWrt:/# cat /tmp/a.txt
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"natomiast w dmesg znowu jest:
[ 12.370000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 14.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 14.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.420000] sda: sda1
[ 14.430000] block: extroot: cannot find device with UUID 00649b4c-bb6f-4043-98b3-396480d1c553po zalogowaniu daję block info i taki zonk jest:
root@OpenWrt:/# block info
/sbin/block: line 2: /tmp/overlay/sbin/usbmode: not found
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"normalny to błąd jest z pierwszej linii?
Pozdr
23 2016-01-05 21:25:58
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
Odpowiem sobie, jeżeli dotyczy wydajności prądowej USB.
Zmierzyłem i modem mierze podczas transmisji max 220mA prądu, co przy standardowej wydajności prądowej USB 500mA jest OK.
Chyba, że routery MR-3420 dają mniej prądu? Ma ktoś z Was taką wiedzę?
24 2016-01-05 20:48:59
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
Zrobiłem DOKŁADNIE tak jak napisałeś.
Router MR-3420 i karta 8GB.
Efekty są takie jak poprzednio.
[ 11.240000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.430000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 11.440000] scsi host0: usb-storage 1-1:1.0
[ 12.440000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 12.450000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 12.470000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 14.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 14.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.420000] sda: sda1
[ 14.430000] block: extroot: cannot find device with UUID 00649b4c-bb6f-4043-98b3-396480d1c553chwilę potem znowu wykrywa:
[ 32.450000] usb 1-1: USB disconnect, device number 2
[ 33.000000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 33.520000] usb-storage 1-1:1.2: USB Mass Storage device detected
[ 33.540000] scsi host1: usb-storage 1-1:1.2
[ 34.540000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 34.550000] sd 1:0:0:0: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 34.580000] sd 1:0:0:0: [sda] Write Protect is off
[ 34.580000] sd 1:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 34.580000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.620000] sda: sda1
[ 34.620000] sd 1:0:0:0: [sda] Attached SCSI removable diskNie może znaleść urządzenia o UUID wskazanym przez fstab, a przecież takie jest:
root@OpenWrt:/# block info
/sbin/block: line 2: /tmp/overlay/sbin/usbmode: not found
/dev/mtdblock2: UUID="8b948af5-34988e51-08275cd9-66e6abd9" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="00649b4c-bb6f-4043-98b3-396480d1c553" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"Oczywiście i mount i df nie wskazują obecności /dev/sda1
Czy problemy mogą być spowodowane brakiem dodatkowego zasilania USB?
Brakuje extroota, zatem dalej nawet nie próbowałem.
Coraz bliżej jestem wyrzucenia tego routera przez okno i zakupu czegoś z 2xUSB i więcej flash.
Z pozdrowieniami
SR
25 2016-01-05 13:50:42
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
coś jest chyba nie tak - włożyłem nową kartę SD, zrobiłem roota dokładnie wg elementarza:
https://wiki.openwrt.org/doc/howto/extroot.
Na dysku pojawiają się błędy, a karta jest nowa/świeżo sformatowana i bez błędów. Wydaje się, że błędy powstają podczas przełączania modemu.
Wydaje się, że na początku karta microSD wykrywana jest jako sda, potem jako sdb, stąd błędy powstają przy sda. Dobrze myślę?
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 3.18.23 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46943) ) #4 Sat Jan 2 12:51:00 CET 2016
[ 0.740000] 5 tp-link partitions found on MTD device spi0.0
[ 0.740000] Creating 5 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.750000] 0x000000020000-0x000000145c3c : "kernel"
[ 0.760000] 0x000000145c3c-0x0000003f0000 : "rootfs"
[ 0.760000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.770000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.780000] 0x000000390000-0x0000003f0000 : "rootfs_data"
[ 0.790000] 0x0000003f0000-0x000000400000 : "art"
[ 0.790000] 0x000000020000-0x0000003f0000 : "firmware"
[ 7.950000] eth1: link up (1000Mbps/Full duplex)
[ 9.090000] mount_root: loading kmods from internal overlay
[ 9.350000] jffs2: notice: (391) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 9.370000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 9.380000] block: extroot: device not present, retrying in 5 seconds
[ 11.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.410000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 11.410000] scsi host0: usb-storage 1-1:1.0
[ 12.420000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 12.430000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 12.450000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 14.390000] sd 0:0:0:1: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 14.400000] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.420000] sda: sda1
[ 14.430000] block: extroot: cannot find device with UUID 1ff0149e-e95c-4e27-98fd-70c0cf38afc1
[ 14.480000] jffs2: notice: (388) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 14.500000] mount_root: loading kmods from internal overlay
[ 24.820000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 24.850000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
[ 24.900000] mount_root: switched to extroot
[ 24.940000] eth1: link down
[ 29.720000] random: nonblocking pool is initialized
[ 33.580000] Aborting journal on device sda1-8.
[ 33.580000] JBD2: Error -5 detected when updating journal superblock for sda1-8.
[ 33.610000] blk_update_request: I/O error, dev sda, sector 0
[ 33.610000] sd 0:0:0:1: [sda] Synchronizing SCSI cache
[ 33.770000] usb 1-1: USB disconnect, device number 2
[ 34.320000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129584: comm dropbear: reading directory lblock 0
[ 34.350000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129584: comm dropbear: reading directory lblock 0
[ 34.600000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 34.600000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129559: comm grep: reading directory lblock 0
[ 34.620000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129576: comm S50telnet: reading directory lblock 0
[ 35.030000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm S95done: reading directory lblock 0
[ 35.050000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129584: comm mount_root: reading directory lblock 0
[ 35.070000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #2: comm mount_root: reading directory lblock 0
[ 35.090000] EXT4-fs error (device sda1): ext4_read_inode_bitmap:185: comm mount_root: Cannot read inode bitmap - block_group = 0, inode_bitmap = 491
[ 35.100000] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal
[ 35.110000] EXT4-fs (sda1): Remounting filesystem read-only
[ 35.170000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 35.200000] usb-storage 1-1:1.2: USB Mass Storage device detected
[ 35.200000] scsi host1: usb-storage 1-1:1.2
[ 36.210000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 36.220000] sd 1:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 36.240000] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.240000] sd 1:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[ 36.250000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.290000] sdb: sdb1
[ 36.300000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 36.330000] device eth1 entered promiscuous mode
[ 36.350000] cdc_ether 1-1:1.0 eth2: kevent 12 may have been dropped
[ 36.530000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129537: comm fw3: reading directory lblock 0
[ 36.540000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm fw3: reading directory lblock 0
[ 37.220000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 37.940000] eth1: link up (1000Mbps/Full duplex)
[ 37.950000] br-lan: port 1(eth1) entered forwarding state
[ 37.950000] br-lan: port 1(eth1) entered forwarding state
[ 39.950000] br-lan: port 1(eth1) entered forwarding state
[ 40.910000] EXT4-fs error: 3 callbacks suppressed
[ 40.920000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm procd: reading directory lblock 0
[ 41.840000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 43.370000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129538: comm dhcp.script: reading directory lblock 0
[ 44.440000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 51.390000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129538: comm telnetd: reading directory lblock 0
[ 51.440000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm ash: reading directory lblock 0
[ 51.570000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm sysinfo.sh: reading directory lblock 0
[ 51.580000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm sysinfo.sh: reading directory lblock 0
[ 51.640000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129537: comm df: reading directory lblock 0
[ 51.800000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129635: comm sysinfo.sh: reading directory lblock 0
[ 51.880000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 51.900000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 51.920000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 51.940000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 51.980000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129538: comm ash: reading directory lblock 0
[ 51.990000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129537: comm ash: reading directory lblock 0
[ 54.390000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129542, block 0)
[ 54.400000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129542: comm ls: reading directory lblock 0
[ 54.440000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129542, block 0)
[ 54.480000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129542, block 0)
[ 54.510000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129542, block 0)
[ 54.630000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129542, block 0)
[ 57.390000] EXT4-fs warning: 1 callbacks suppressed
[ 57.400000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)
[ 60.170000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #129537: comm ash: reading directory lblock 0
[ 62.320000] EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 129537, block 0)Ponadto zarówno banner jak i df wskazują na poszerzoną przestrzeń:
----------------------------------------------------------------
| Machine: TP-Link TL-MR3420 v2 |
| Uptime: 0d, 00:00:51 |
| Load: 0.64 0.20 0.07 |
| Flash: total: 7.2GB, free: 6.8GB, used: 0% |
| Memory: total: 27.8MB, free: 15.8MB, used: 43% |
| WAN: 192.168.8.100, proto: dhcp |
| LAN: 192.168.1.1 |
----------------------------------------------------------------root@OpenWrt:/# df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 7504760 17640 7082848 0% /
/dev/root 2304 2304 0 100% /rom
tmpfs 14248 96 14152 1% /tmp
overlayfs:/overlay 7504760 17640 7082848 0% /
tmpfs 512 0 512 0% /devPonadto w trakcie bootu szuka urządzenia o id
block: extroot: cannot find device with UUID 1ff0149e-e95c-4e27-98fd-70c0cf38afc1 a wpisane ma w fstab
root@OpenWrt:/# uci show fstab
fstab.@global[0]=global
fstab.@global[0].anon_swap='0'
fstab.@global[0].anon_mount='0'
fstab.@global[0].auto_swap='1'
fstab.@global[0].auto_mount='1'
fstab.@global[0].delay_root='5'
fstab.@global[0].check_fs='0'
fstab.@mount[0]=mount
fstab.@mount[0].uuid='234d06b6-b977-4aac-a834-86069d032db5'
fstab.@mount[0].target='/overlay'
fstab.@mount[0].enabled='1'Cezary, będziesz robił tutorial, to się wstrzymam z kopaniem?
Pozdr
Znalezione posty: 1 do 25 z 35
eko.one.pl → Posty przez ruszomir
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc