1 Odpowiedź przez rogales

(21 odpowiedzi, napisanych Oprogramowanie / Software)

kofec napisał/a:

Ja zmieniłem sobie jeszcze ustawienia wiatraka - startuje od 43 stopni nie jak domyślnie od 23, wiec prawie nigdy się nie uruchamia.

cat /etc/init.d/hwmon_fancontrol

#!/bin/sh /etc/rc.common

START=98
boot() {
. /lib/functions.sh

#configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own
#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface

case $(board_name) in
zyxel,nsa310b)
        path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
        echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
        echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes
        echo 43000 > "$path_to_hwmon/temp1_auto_temp_min"
        echo 49600 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsiu
        ;;

Witam.
Post jak widać dość stary, ale przez wyszukiwanie znalazłem sposób na ustawienie wentylatora, a w zasadzie momentu jego załączenia.

Posiadam NSA 310 na buildzie OpenWrt 21.02.3, r16554-1d4dea6d4f.

Oto mój config w hmon_fancontrol

#!/bin/sh /etc/rc.common

START=98

boot() {
        # configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own
        # for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface

        case $(board_name) in
        iom,ix2-200)
                path_to_hwmon='/sys/class/hwmon/hwmon0'
                echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
                ;;
        seagate,blackarmor-nas220)
                path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
                # adt7476 fan control chip. 3 temp sensors. Set to 1/4 speed at 35C and max speed at 48C.
                echo 7 > "$path_to_hwmon/pwm1_auto_channels_temp"
                echo 64 > "$path_to_hwmon/pwm1_auto_point1_pwm"
                echo 255 > "$path_to_hwmon/pwm1_auto_point2_pwm"
                echo 35000 > "$path_to_hwmon/temp1_auto_point1_temp"
                echo 48000 > "$path_to_hwmon/temp1_auto_point2_temp"
                echo 35000 > "$path_to_hwmon/temp2_auto_point1_temp"
                echo 48000 > "$path_to_hwmon/temp2_auto_point2_temp"
                echo 35000 > "$path_to_hwmon/temp3_auto_point1_temp"
                echo 48000 > "$path_to_hwmon/temp3_auto_point2_temp"
                echo 2 > "$path_to_hwmon/pwm1_enable"
                ;;
        zyxel,nsa310b)
                path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
                # use the max. value of (temp1) OR (temp2) OR (temp3) as an input
                # for the PWM of the cooling fan
                echo 123 > "$path_to_hwmon/pwm1_auto_channels"
                # Temperature sensor #1 placed on mainboard
                echo 30000 > "$path_to_hwmon/temp1_auto_temp_min"
                echo 49000 > "$path_to_hwmon/temp1_auto_temp_max"
                # Temperature sensor #2 placed on mainboard
                # range: 0 to 127000 in steps of 1000 [millicelsius]
                echo 30000 > "$path_to_hwmon/temp2_auto_temp_min"
                # range: 0 to 127000 in steps of ???? [millicelsius]
                echo 49000 > "$path_to_hwmon/temp2_auto_temp_max"
                # Temperature sensor #3 placed close to a chipset
                # range: 0 to 60000 in steps of 1000 [millicelsius]
                echo 30000 > "$path_to_hwmon/temp3_auto_temp_min"
                # pre-defined steps: 103000, 122000, 143300, 170000 in [millicelsius]
                echo 103000 > "$path_to_hwmon/temp3_auto_temp_max"
                ;;
        esac
}

Niestety, ale wentylator załącza się szybciej jak ustawiłem, oto dowód: https://i.imgur.com/0KLJh7E.png

Będę wdzięczny za pomoc z Waszej strony.

Idź do forum: Oprogramowanie / Software

2 Odpowiedź przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Niestety nie działa, póki co się poddaję, to nie na moje możliwości. Dzięki za czas i pomoc.

Idź do forum: Oprogramowanie / Software

3 Odpowiedź przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary napisał/a:

Skopuj plik /root/.rtorrent.rc do katalogu / (głównego)


Jaki folder mam rozumieć przez "główny"?

Idź do forum: Oprogramowanie / Software

4 Odpowiedź przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary napisał/a:

Wyłącz rtorrent i skasuj: rm /tmp/rtorrent.socket

Ale to pewnie nie to jest problemem.

Dało to taki efekt, że po wpisaniu w terminal:

 rtorrent -o import=/root/.rtorrent.rc


rtorrent działa, na prawidłowych ustawieniach, lecz podglądu w rutorrent brak.

Idź do forum: Oprogramowanie / Software

5 Odpowiedź przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Co mogę(powinienem) zrobić?

Idź do forum: Oprogramowanie / Software

6 Odpowiedź przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Niestety nie pomaga.

Dodam, że wklepałem tą komendę w terminal:

rtorrent -o import=/root/.rtorrent.rc

i dostałem:

rtorrent: Error in option file: ~/.rtorrent.rc:120: SCGI already enabled.

Mój config:

#############################################################################

# Maximum and minimum number of peers to connect to per torrent.
#
throttle.min_peers.normal.set = 40
throttle.max_peers.normal.set = 60

# Same as above but for seeding completed torrents.
# "-1" = same as downloading.
#
throttle.min_peers.seed.set = 10
throttle.max_peers.seed.set = 70

# Maximum number of simultaneous uploads per torrent.
#
throttle.max_uploads.set = 30


# Global upload and download rate in KiB.
# "0" for unlimited.
#
throttle.global_down.max_rate.set_kb = 0
throttle.global_up.max_rate.set_kb = 0
network.http.dns_cache_timeout.set = 0


throttle.max_downloads.global.set = 150
throttle.max_uploads.global.set   = 150

# Default directory to save the downloaded torrents.
#
directory.default.set = /home/files/

# Default session directory. Make sure you don't run multiple instance
# of rTorrent using the same session directory. Perhaps using a
# relative path?
#
session.path.set = ~/.rtorrent.session

# Watch a directory for new torrents, and stop those that have been
# deleted.
#
#schedule2 = watch_directory,5,5,load.start=./watch/*.torrent

# Close torrents when disk-space is low.
#
#schedule2 = low_diskspace,5,60,close_low_diskspace=100M

# The IP address reported to the tracker.
#
#network.local_address.set = 127.0.0.1
#network.local_address.set = rakshasa.no

# The IP address the listening socket and outgoing connections is
# bound to.
#
#network.bind_address.set = 127.0.0.1
#network.bind_address.set = rakshasa.no

# Port range to use for listening.
#
network.port_range.set = 55800-55900

# Start opening ports at a random position within the port range.
#
network.port_random.set = no

# Check hash for finished torrents. Might be useful until the bug is
# fixed that causes lack of disk-space not to be properly reported.
#
pieces.hash.on_completion.set = no

# Set whether the client should try to connect to UDP trackers.
#
trackers.use_udp.set = yes

# Alternative calls to bind and IP that should handle dynamic IP's.
#
#schedule2 = ip_tick,0,1800,ip=rakshasa
#schedule2 = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plain-text to RC4 encryption after the encrypted handshake.
#
protocol.encryption.set = allow_incoming,enable_retry,prefer_plaintext

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht.mode.set = off

# UDP port to use for DHT.
#
dht.port.set = 6881

# Enable peer exchange (for torrents not marked private).
#
protocol.pex.set = yes

# Set download list layout style ("full", "compact").
#
#ui.torrent_list.layout.set = "full"

# Run rTorrent as a daemon, controlled via XMLRPC.
#
#system.daemon.set = false

# SCGI Connectivity (for alternative rtorrent interfaces, XMLRPC)
# Use a IP socket with scgi_port, or a Unix socket with scgi_local.
# schedule can be used to set permissions on the unix socket.
#
#
#network.scgi.open_port = "127.0.0.1:5000"
network.scgi.open_local =/tmp/rtorrent.socket
schedule2 = socket_chmod, 0, 0, "execute.nothrow=chmod,770,(cat,(session.path),/rpc.sock)"

Idź do forum: Oprogramowanie / Software

7 Temat przez rogales

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Witam,

chciałbym prosić Was o pomoc, a mianowicie.
Gdy uruchomię swój NSA310 i przez putty wpiszę komendę:

screen -dmSfn rtorrent rtorrent

To rtorrent działa bez zarzutów, zapamiętał sesję, wszystkie ustawienia.

Chciałem w związku z tym dodać możliwość automatycznego uruchamiania sesji z tą aplikacją. Wpisałem przez nano w /etc/rc.local:

sleep 35
screen -dmSfn rtorrent rtorrent

i o ile aplikacja w sesji jest uruchomiona, o tyle rtorrent jest uruchomiony bez ustawień z pliku /.rtorrent.rc

więc edytowałem ponownie plik /etc/rc.local:
i zmieniłem tak:

sleep 35
screen -dmSfn rtorrent rtorrent -o import=/root/.rtorrent.rc

po restarcie NSA310 brak sesji czyt. brak włączonego rtorrent'a.

Dziękuję za wszelkie wskazówki i pomoc.

Idź do forum: Oprogramowanie / Software

8 Odpowiedź przez rogales

(13 odpowiedzi, napisanych Oprogramowanie / Software)

Wyłączyłem i nic się nie stało - wychodzi na to, że NSA310 niestety nie wspiera indywidualnego wyłączania prądu.
Rozumiem, że żadnej alternatywy nie ma jak podłączyć wentylator pod USB i sterować nim manualnie (przez przycisk na obudowie)?

Idź do forum: Oprogramowanie / Software

9 Odpowiedź przez rogales

(13 odpowiedzi, napisanych Oprogramowanie / Software)

Dzięki.
Możliwe, że jest to gniazdo eSATA?
Niestety nie mam jak tego sprawdzić - a jakby co przejściówka na USB i wentylator byłby możliwy do kontrolowania.

Idź do forum: Oprogramowanie / Software

10 Odpowiedź przez rogales

(13 odpowiedzi, napisanych Oprogramowanie / Software)

Witajcie.
Znowu bawię się w archeologa, ale chciałbym Was zapytać w jaki sposób mogę sprawdzić, dowiedzieć się co to za port Port 1: 0000.0503

Jasne - mógłbym to komendą wyłączyć, ale boję się, że wtedy nie będzie łatwego powrotu do załączenia z powrotem.

Chcę podłączyć wentylator pod gniazdo USB - ale z tego co się orientuję, do poprawnego działania musi być individual power switching, a to gniazdo to oferuje.

Hub #0 at 001:002
 INFO: ganged switching.
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Hub #1 at 001:001
 INFO: individual power switching.
 WARN: Port indicators are NOT supported.
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect

Dziękuję.

Idź do forum: Oprogramowanie / Software

11 Odpowiedź przez rogales

(7 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary napisał/a:

Zadajesz pytania jak byś pierwszy raz używał serwera www...


Bo tak właściwie jest - jeszcze niecałe 14 dni temu nie wiedziałem nawet, że będę w stanie wgrać inny system na NSA310.

Wiem, że takie pytania mogą irytować, ale przynajmniej próbuję sam różnymi komendami i pytam mądrzejszych od Siebie, na tym ŚWIETNYM forum.

Wszystko już działa, dziękuję Cezary

Idź do forum: Oprogramowanie / Software

12 Odpowiedź przez rogales

(7 odpowiedzi, napisanych Oprogramowanie / Software)

Udało się!
Śmiga!
Jak zwykle wielkie podziękowania dla Ciebie Cezary. Świetnie podpowiedziałeś.

PS. Poza przeniesieniem do folderu /rutorrent/rutorrent/ musiałem jeszcze usunąć "list lua_prefix '/cgi-bin/luci=/usr/lib/lua/luci/sgi/uhttpd.lua'"



\\\\\\\\\\\\\\\\\\


EDIT: Niestety pospieszyłem się i wchodząc na http://rogales.ddns.net (lub 192.168.1.10) mam okno które w żadnym wypadku nie powinno się wyświetlać. Jak mogę to zablokować? - https://i.imgur.com/2Y8NXpW.png

mam folder: /www1/rutorrent/rutorrent (tutaj zawartość rutorrenta) - to działa, files również.

Idź do forum: Oprogramowanie / Software

13 Odpowiedź przez rogales

(7 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary zawsze naprowadzi, dzięki!

Okej zacząłem działać.

Narazie zrobiłem tak w /etc/config/uhttpd

config uhttpd 'main'
        list listen_http '0.0.0.0:8081'
        list listen_http '[::]:8081'
        list listen_https '0.0.0.0:443'
        list listen_https '[::]:443'
        option redirect_https '0'
        option home '/www'
        option rfc1918_filter '1'
        option max_requests '3'
        option max_connections '100'
        option cert '/etc/uhttpd.crt'
        option key '/etc/uhttpd.key'
        option cgi_prefix '/cgi-bin'
        list lua_prefix '/cgi-bin/luci=/usr/lib/lua/luci/sgi/uhttpd.lua'
        option script_timeout '60'
        option network_timeout '30'
        option http_keepalive '20'
        option tcp_keepalive '1'
        option ubus_prefix '/ubus'
        option interpreter '.php=/usr/bin/php-cgi'

config uhttpd 'rutorrent'
        list listen_http '0.0.0.0:80'
        list listen_http '[::]:80'
        option redirect_https '1'
        option home '/www1/rutorrent'
        option rfc1918_filter '1'
        option max_requests '3'
        option max_connections '100'
        option cert '/etc/uhttpd.crt'
        option key '/etc/uhttpd.key'
        list lua_prefix '/cgi-bin/luci=/usr/lib/lua/luci/sgi/uhttpd.lua'
        option script_timeout '60'
        option network_timeout '30'
        option http_keepalive '20'
        option tcp_keepalive '1'
        option ubus_prefix '/ubus'
        option interpreter '.php=/usr/bin/php-cgi'




config cert 'defaults'
        option days '730'
        option key_type 'ec'
        option bits '2048'
        option ec_curve 'P-256'
        option country 'ZZ'
        option state 'Somewhere'
        option location 'Unknown'
        option commonname 'OpenWrt'

Cała zawartość /www/rutorrent/ została skopiowana do /www1/rutorrent
chown 777 /www1 również dodałem


I wyskakuje:

Not Found
The requested URL /rutorrent was not found on this server.

Gdzie zrobiłem błąd?

Idź do forum: Oprogramowanie / Software

14 Temat przez rogales

(7 odpowiedzi, napisanych Oprogramowanie / Software)

Witam.

Urządzenie: NSA310
System: OpenWrt 21.02.3 r16554-1d4dea6d4f / LuCI openwrt-21.02 branch git-22.083.69138-0a0ce2a

Założyłem ten temat ponieważ mam pewien problem z którym nie mogę sobie poradzić.
Jak mogę zablokować dostęp do logowania na luci http://mojadomena.com/cgi-bin/luci/. aby dostęp był tylko z pozycji lan.
Dodam tylko, że na tym urządzeniu, posiadam również dostęp do /ruTorrent, oraz "strony" z indeksem ściągniętych plików tj. /files.
I do tych dwóch sekcji chciałbym mieć możliwość łączenia się z zewnątrz.

Dziękuję.

Idź do forum: Oprogramowanie / Software

15 Odpowiedź przez rogales

(12 odpowiedzi, napisanych Oprogramowanie / Software)

Może nie zwiążane z tematem, ale chciałbym zapytać co może być przyczyną ściągania przez rtorrent z prędkością max 12 MiB/s.
Dodam, że porty przekierowane i jestem dostępny.
Jakby co torrent z ogromną ilością seedów (prywatny tracker).
Co powinienem sprawdzić, zrobić, od czego zacząć w celu diagnozy.
A może NSA310 po prostu już nie wyrabia wydajnością sprzętową?

Dzięki,

Idź do forum: Oprogramowanie / Software

16 Odpowiedź przez rogales

(41 odpowiedzi, napisanych Oprogramowanie / Software)

ambrozy5 napisał/a:
rogales napisał/a:

Dziękuję Cezary, śmiga!

Jaki aprzęt i jakie prędkości?

NSA310.
Mam stary dysk w nim (WD Black 500GB 5400 rpm) i niestety kabel 5e, więc ciężko będzie uzyskać maksymalną możliwość łącza.
Porty mam przekierowane. Wyciągam maksymalnie 15 MiB/s.

Narazie jestem zadowolony, że się udało wszystko skonfigurować po wielu godzinach spędzonych przy wpisywaniu wszystkich komend- no, ale liczyłem się z tym będąc linuksowym laikiem.

Idź do forum: Oprogramowanie / Software

17 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

Samba działa, jest dostęp do folderu sieciowego, lecz pojawił się ten problem co wcześniej.
https://i.imgur.com/acebFTD.png

dodam, że na androidzie również ten sam problem.

Kopiowanie z samby zatrzymuje się na obliczaniu czasu.


EDIT:

Zaznaczyłem w luci samba4 "Force synchronous I/O

On lower-end devices may increase speeds, by forceing synchronous I/O instead of the default asynchronous." i chyba jest oczekiwany efekt.

Zobaczymy.

Idź do forum: Oprogramowanie / Software

18 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

Spróbuję, tylko będę pewnie Was męczył z tym kopiowaniem...

Idź do forum: Oprogramowanie / Software

19 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

Jak tylko pomyślę o wpisywaniu wszystkich komend i instalowaniu (na moim poziomie), to wolę wrócić do samby i dojść do tego, dlaczego nie chce plików kopiować (trwa obliczanie i nic więcej) i tak zostawić.

Idź do forum: Oprogramowanie / Software

20 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

root@OpenWrt:~# logread
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.000000] Linux version 5.4.188 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 Sat Apr 16 12:59:34 2022
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] OF: fdt: Machine model: ZyXEL NSA310b
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Memory policy: Data cache writeback
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000] On node 0 totalpages: 65536
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 576 pages used for memmap
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] Memory: 250944K/262144K available (5165K kernel code, 179K rwdata, 832K rodata, 1024K init, 210K bss, 11200K reserved, 0K cma-reserved)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0xc0800b9c with crng_init=0
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000035] Switching to timer-based delay loop, resolution 5ns
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000117] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000136] pid_max: default: 32768 minimum: 301
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000328] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.000348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.001206] CPU: Testing write buffer coherency: ok
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.002063] Setting up static identity map for 0x100000 - 0x10003c
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.002315] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.005519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.005543] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.005659] pinctrl core: initialized pinctrl subsystem
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.006744] NET: Registered protocol family 16
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.007094] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.008012] cpuidle: using governor ladder
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.008341] Feroceon L2: Enabling L2
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.008383] Feroceon L2: Cache support initialised.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.012081] No ATAGs?
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.029927] SCSI subsystem initialized
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    0.030716] libata version 3.00 loaded.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.030933] usbcore: registered new interface driver usbfs
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.030990] usbcore: registered new interface driver hub
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.031037] usbcore: registered new device driver usb
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.033670] clocksource: Switched to clocksource orion_clocksource
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.034323] thermal_sys: Registered thermal governor 'step_wise'
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.034550] NET: Registered protocol family 2
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.034686] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035268] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035298] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035329] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035356] TCP: Hash tables configured (established 2048 bind 2048)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035431] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035454] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035598] NET: Registered protocol family 1
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.035626] PCI: CLS 0 bytes, default 32
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.037881] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.043136] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.043147] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.047411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.052323] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
Thu Jun  9 17:53:33 2022 kern.err kernel: [    0.053206] mvebu-gpio f1010140.gpio: IRQ index 3 not found
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053586] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053603] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053614] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053623] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053775] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.053808] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.054986] PCI: bus0: Fast back to back transfers disabled
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055001] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055124] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055159] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055184] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055203] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055217] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055301] pci 0000:01:00.0: supports D1 D2
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.055311] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056465] PCI: bus1: Fast back to back transfers disabled
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056481] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056669] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056682] pci 0000:00:01.0: BAR 7: assigned [io  0x10000-0x10fff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056694] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056708] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056720] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056739] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056757] pci 0000:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056770] pci 0000:00:01.0: PCI bridge to [bus 01]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056780] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.056792] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.057208] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.058858] printk: console [ttyS0] disabled
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.058930] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.621188] printk: console [ttyS0] enabled
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.625947] Loading iSCSI transport class v2.0-870.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.632694] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.639113] nand: Samsung NAND 128MiB 3,3V 8-bit
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.643771] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.651383] Scanning device for bad blocks
Thu Jun  9 17:53:33 2022 kern.warn kernel: [    0.692285] Bad eraseblock 384 at 0x000003000000
Thu Jun  9 17:53:33 2022 kern.warn kernel: [    0.699079] Bad eraseblock 407 at 0x0000032e0000
Thu Jun  9 17:53:33 2022 kern.warn kernel: [    0.729227] Bad eraseblock 674 at 0x000005440000
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.767288] 3 fixed-partitions partitions found on MTD device orion_nand
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.774032] Creating 3 MTD partitions on "orion_nand":
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.779196] 0x000000000000-0x0000000c0000 : "uboot"
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.784747] 0x0000000c0000-0x000000140000 : "uboot_env"
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.790547] 0x000000140000-0x000008000000 : "ubi"
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.797699] rtc-mv f1010300.rtc: registered as rtc0
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.802668] i2c /dev entries driver
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.807285] orion_wdt: Initial timeout 21 sec
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.821350] marvell-cesa f1030000.crypto: CESA device successfully registered
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.829487] NET: Registered protocol family 10
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.835702] Segment Routing with IPv6
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.839452] NET: Registered protocol family 17
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.843983] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    0.857145] 8021q: 802.1Q VLAN Support v1.8
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.864256] UBI: auto-attach mtd2
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    0.867591] ubi0: attaching mtd2
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.043655] ubi0: scanning is finished
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.058862] ubi0: attached mtd2 (name "ubi", size 126 MiB)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.064401] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.071301] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.078044] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.084874] ubi0: good PEBs: 1011, bad PEBs: 3, corrupted PEBs: 0
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.090991] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.098252] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1650113974
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.107433] ubi0: available PEBs: 0, total reserved PEBs: 1011, PEBs reserved for bad PEB handling: 17
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.117433] block ubiblock0_1: created from ubi0:1(rootfs)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.122942] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.129989] rtc-mv f1010300.rtc: setting system clock to 2022-06-09T17:53:21 UTC (1654797201)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    1.138909] ubi0: background thread "ubi_bgt0d" started, PID 480
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.148788] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.158873] Freeing unused kernel memory: 1024K
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.163516] Run /sbin/init as init process
Thu Jun  9 17:53:33 2022 user.info kernel: [    1.458480] init: Console is alive
Thu Jun  9 17:53:33 2022 user.info kernel: [    1.462044] init: - watchdog -
Thu Jun  9 17:53:33 2022 user.info kernel: [    1.774589] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.896315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.906163] ehci-fsl: Freescale EHCI Host controller driver
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.914669] ehci-orion: EHCI orion driver
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.918869] orion-ehci f1050000.ehci: EHCI Host Controller
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.924442] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.932268] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.963695] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.970333] hub 1-0:1.0: USB hub found
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.974326] hub 1-0:1.0: 1 port detected
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.981598] ehci-platform: EHCI generic platform driver
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    1.993860] sata_mv f1080000.sata: version 1.28
Thu Jun  9 17:53:33 2022 kern.info kernel: [    1.994081] sata_mv f1080000.sata: slots 32 ports 2
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.002068] scsi host0: sata_mv
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.006122] scsi host1: sata_mv
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.009447] ata1: SATA max UDMA/133 irq 32
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.013560] ata2: SATA max UDMA/133 irq 32
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.143670] random: fast init done
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.263685] usb 1-1: new high-speed USB device number 2 using orion-ehci
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.465750] hub 1-1:1.0: USB hub found
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.469893] hub 1-1:1.0: 4 ports detected
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.513697] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.524515] ata1.00: ATA-8: WDC WD5000AAKX-003CA0, 15.01H15, max UDMA/133
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.531348] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.542714] ata1.00: configured for UDMA/133
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.547346] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.556701] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.564718] sd 0:0:0:0: [sda] Write Protect is off
Thu Jun  9 17:53:33 2022 kern.debug kernel: [    2.569548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.569694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.594623]  sda: sda1
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    2.597951] sd 0:0:0:0: [sda] Attached SCSI disk
Thu Jun  9 17:53:33 2022 kern.info kernel: [    2.894604] ata2: SATA link down (SStatus 0 SControl F300)
Thu Jun  9 17:53:33 2022 user.info kernel: [    2.900329] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jun  9 17:53:33 2022 user.info kernel: [    2.920085] init: - preinit -
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    3.510277] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    3.551919] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    3.772144] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.023736] UBIFS (ubi0:2): Mounting in unauthenticated mode
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.055390] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 665
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.088983] UBIFS (ubi0:2): recovery needed
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.174295] UBIFS (ubi0:2): recovery completed
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.178842] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.186731] UBIFS (ubi0:2): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.196701] UBIFS (ubi0:2): FS size: 121282560 bytes (115 MiB, 940 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.207370] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
Thu Jun  9 17:53:33 2022 kern.notice kernel: [    8.214037] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 1ADB3292-B16A-4E88-B49F-DDAB9547483C, small LPT model
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.230703] mount_root: loading kmods from internal overlay
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.368224] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.412232] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.536931] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.545524] block: extroot: not configured
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.550736] mount_root: switching to ubifs overlay
Thu Jun  9 17:53:33 2022 user.warn kernel: [    8.564152] urandom-seed: Seeding with /etc/urandom.seed
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.599388] procd: - early -
Thu Jun  9 17:53:33 2022 user.info kernel: [    8.602347] procd: - watchdog -
Thu Jun  9 17:53:33 2022 kern.info kernel: [    8.968691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Thu Jun  9 17:53:33 2022 user.info kernel: [    9.192578] procd: - watchdog -
Thu Jun  9 17:53:33 2022 user.info kernel: [    9.196775] procd: - ubus -
Thu Jun  9 17:53:33 2022 user.info kernel: [    9.278152] procd: - init -
Thu Jun  9 17:53:33 2022 user.info kernel: [    9.831818] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jun  9 17:53:33 2022 user.info kernel: [   10.085161] urngd: v1.0.2 started.
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.174078] RPC: Registered named UNIX socket transport module.
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.180030] RPC: Registered udp transport module.
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.184772] RPC: Registered tcp transport module.
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.189490] RPC: Registered tcp NFSv4.1 backchannel transport module.
Thu Jun  9 17:53:33 2022 kern.notice kernel: [   10.271003] crng init done
Thu Jun  9 17:53:33 2022 kern.notice kernel: [   10.273763] random: 7 urandom warning(s) missed due to ratelimiting
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.543760] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.620825] hwmon_vid: Unknown VRM version of your CPU
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.656697] pci 0000:00:01.0: enabling device (0140 -> 0143)
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.662407] r8169 0000:01:00.0: enabling device (0140 -> 0143)
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.700821] r8169 0000:01:00.0 eth0: RTL8168d/8111d, 00:00:00:00:00:30, XID 283, IRQ 36
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.708913] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Thu Jun  9 17:53:33 2022 kern.info kernel: [   10.825086] xt_time: kernel timezone is -0000
Thu Jun  9 17:53:33 2022 kern.info kernel: [   11.009510] PPP generic driver version 2.4.2
Thu Jun  9 17:53:33 2022 kern.info kernel: [   11.034535] NET: Registered protocol family 24
Thu Jun  9 17:53:33 2022 user.info kernel: [   11.073931] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jun  9 17:53:34 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Jun  9 17:53:34 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Jun  9 17:53:34 2022 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: Connected to system UBus
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: started, version 2.85 cachesize 150
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: DNS service limited to local subnets
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: UBus support enabled: connected to system bus
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain test
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain onion
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain localhost
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain local
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain invalid
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain bind
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain lan
Thu Jun  9 17:53:35 2022 daemon.warn dnsmasq[1344]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: read /etc/hosts - 4 addresses
Thu Jun  9 17:53:35 2022 daemon.info dnsmasq[1344]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jun  9 17:53:35 2022 authpriv.info dropbear[1406]: Not backgrounding
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: bonding
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: 8021ad
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: 8021q
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: macvlan
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: veth
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: bridge
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: Network device
Thu Jun  9 17:53:36 2022 user.notice : Added device handler type: tunnel
Thu Jun  9 17:53:36 2022 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.516025] RTL8211B Gigabit Ethernet r8169-0-100:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
Thu Jun  9 17:53:37 2022 daemon.notice procd: /etc/rc.d/S50netserver: Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.876007] r8169 0000:01:00.0 eth0: Link is Down
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.880983] br-lan: port 1(eth0) entered blocking state
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.886277] br-lan: port 1(eth0) entered disabled state
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.891772] device eth0 entered promiscuous mode
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.917027] br-lan: port 1(eth0) entered blocking state
Thu Jun  9 17:53:37 2022 kern.info kernel: [   16.922286] br-lan: port 1(eth0) entered forwarding state
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan' is enabled
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan6' is enabled
Thu Jun  9 17:53:37 2022 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan6' has link connectivity
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'lan6' is setting up now
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'loopback' is now up
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Network device 'lo' link is up
Thu Jun  9 17:53:37 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jun  9 17:53:37 2022 daemon.notice netifd: lan (1732): udhcpc: started, v1.33.2
Thu Jun  9 17:53:37 2022 daemon.err odhcp6c[1733]: Failed to send RS (Permission denied)
Thu Jun  9 17:53:38 2022 daemon.notice netifd: bridge 'br-lan' link is down
Thu Jun  9 17:53:38 2022 daemon.notice netifd: Interface 'lan' has link connectivity loss
Thu Jun  9 17:53:38 2022 daemon.notice netifd: Interface 'lan6' has link connectivity loss
Thu Jun  9 17:53:38 2022 kern.info kernel: [   17.555090] br-lan: port 1(eth0) entered disabled state
Thu Jun  9 17:53:38 2022 daemon.notice netifd: lan6 (1733): Command failed: Permission denied
Thu Jun  9 17:53:38 2022 daemon.notice netifd: lan (1732): udhcpc: sending discover
Thu Jun  9 17:53:38 2022 daemon.notice netifd: lan (1732): udhcpc: received SIGTERM
Thu Jun  9 17:53:38 2022 daemon.notice netifd: lan (1732): udhcpc: entering released state
Thu Jun  9 17:53:38 2022 daemon.err odhcp6c[1733]: Failed to send SOLICIT message to ff02::1:2 (Permission denied)
Thu Jun  9 17:53:38 2022 daemon.err odhcp6c[1733]: Failed to send RS (Permission denied)
Thu Jun  9 17:53:38 2022 daemon.notice netifd: Interface 'lan6' is now down
Thu Jun  9 17:53:38 2022 daemon.notice netifd: lan (1732): Command failed: Permission denied
Thu Jun  9 17:53:38 2022 daemon.notice netifd: Interface 'lan' is now down
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Found user 'nobody' (UID 65534) and group 'nogroup' (GID 65534).
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Successfully dropped root privileges.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: avahi-daemon 0.8 starting up.
Thu Jun  9 17:53:39 2022 daemon.warn avahi-daemon[1916]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: No service file found in /etc/avahi/services.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: New relevant interface lo.IPv6 for mDNS.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: New relevant interface lo.IPv4 for mDNS.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Network interface enumeration completed.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Registering new address record for ::1 on lo.*.
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Registering new address record for 127.0.0.1 on lo.IPv4.
Thu Jun  9 17:53:39 2022 kern.info kernel: [   19.399109] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Jun  9 17:53:39 2022 daemon.info avahi-daemon[1916]: Registering HINFO record with values 'ARMV5TEL'/'LINUX'.
Thu Jun  9 17:53:39 2022 kern.info kernel: [   19.427045] br-lan: port 1(eth0) entered blocking state
Thu Jun  9 17:53:39 2022 kern.info kernel: [   19.432329] br-lan: port 1(eth0) entered forwarding state
Thu Jun  9 17:53:39 2022 daemon.notice netifd: Network device 'eth0' link is up
Thu Jun  9 17:53:39 2022 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jun  9 17:53:39 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jun  9 17:53:39 2022 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jun  9 17:53:39 2022 daemon.notice netifd: Interface 'lan6' has link connectivity
Thu Jun  9 17:53:39 2022 daemon.notice netifd: Interface 'lan6' is setting up now
Thu Jun  9 17:53:39 2022 kern.info kernel: [   19.469902] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Jun  9 17:53:40 2022 daemon.notice netifd: lan (2022): udhcpc: started, v1.33.2
Thu Jun  9 17:53:40 2022 daemon.err odhcp6c[2025]: Failed to send RS (Address not available)
Thu Jun  9 17:53:40 2022 daemon.notice netifd: lan (2022): udhcpc: sending discover
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Thu Jun  9 17:53:40 2022 daemon.info avahi-daemon[1916]: Server startup complete. Host name is OpenWrt.local. Local service cookie is 2326031095.
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Thu Jun  9 17:53:40 2022 daemon.info dnsmasq[1344]: read /etc/hosts - 4 addresses
Thu Jun  9 17:53:40 2022 daemon.info dnsmasq[1344]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jun  9 17:53:40 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Thu Jun  9 17:53:41 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Jun  9 17:53:41 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Jun  9 17:53:41 2022 daemon.err odhcp6c[2025]: Failed to send SOLICIT message to ff02::1:2 (Address not available)
Thu Jun  9 17:53:41 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Thu Jun  9 17:53:41 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Thu Jun  9 17:53:41 2022 daemon.info avahi-daemon[1916]: Joining mDNS multicast group on interface br-lan.IPv6 with address fe80::200:ff:fe00:30.
Thu Jun  9 17:53:41 2022 daemon.info avahi-daemon[1916]: New relevant interface br-lan.IPv6 for mDNS.
Thu Jun  9 17:53:41 2022 daemon.info avahi-daemon[1916]: Registering new address record for fe80::200:ff:fe00:30 on br-lan.*.
Thu Jun  9 17:53:42 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 17:53:42 2022 daemon.notice netifd: lan (2022): udhcpc: sending discover
Thu Jun  9 17:53:42 2022 daemon.notice netifd: lan (2022): udhcpc: sending select for 192.168.1.10
Thu Jun  9 17:53:42 2022 daemon.notice netifd: lan (2022): udhcpc: lease of 192.168.1.10 obtained, lease time 86400
Thu Jun  9 17:53:42 2022 daemon.info avahi-daemon[1916]: Joining mDNS multicast group on interface br-lan.IPv4 with address 192.168.1.10.
Thu Jun  9 17:53:42 2022 daemon.info avahi-daemon[1916]: New relevant interface br-lan.IPv4 for mDNS.
Thu Jun  9 17:53:42 2022 daemon.info avahi-daemon[1916]: Registering new address record for 192.168.1.10 on br-lan.IPv4.
Thu Jun  9 17:53:42 2022 daemon.notice netifd: Interface 'lan' is now up
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain test
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain onion
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain localhost
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain local
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain invalid
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain bind
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using only locally-known addresses for domain lan
Thu Jun  9 17:53:42 2022 daemon.info dnsmasq[1344]: using nameserver 192.168.1.1#53
Thu Jun  9 17:53:43 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jun  9 17:53:44 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 17:53:44 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 17:53:45 2022 daemon.info dnsmasq[1344]: read /etc/hosts - 4 addresses
Thu Jun  9 17:53:45 2022 daemon.info dnsmasq[1344]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Jun  9 17:53:48 2022 daemon.err wsdd2: samba36/4 or ksmbd is not running, can't start wsdd2!
Thu Jun  9 17:53:48 2022 daemon.info procd: - init complete -
Thu Jun  9 17:54:26 2022 authpriv.info dropbear[2990]: Child connection from 192.168.1.4:50476
Thu Jun  9 17:54:33 2022 authpriv.notice dropbear[2990]: Password auth succeeded for 'root' from 192.168.1.4:50476
Thu Jun  9 17:56:04 2022 user.info : luci: failed login on /admin/services/ksmbd for root from 192.168.1.4
Thu Jun  9 17:56:10 2022 user.info : luci: accepted login on /admin/services/ksmbd for root from 192.168.1.4
Thu Jun  9 17:56:48 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 17:56:48 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 17:59:38 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 17:59:38 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:03:47 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:03:47 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:04:22 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:04:22 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:04:42 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:04:43 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:05:49 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:06:13 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:07:52 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:08:24 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:08:31 2022 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Thu Jun  9 18:08:35 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Thu Jun  9 18:16:02 2022 authpriv.info dropbear[2990]: Exit (root) from <192.168.1.4:50476>: Exited normally
Thu Jun  9 18:22:12 2022 daemon.err uhttpd[1823]: PHP Fatal error:  Uncaught Error: Call to undefined function session_start() in /www/rutorrent/plugins/check_port/action.php:75
Thu Jun  9 18:22:12 2022 daemon.err uhttpd[1823]: Stack trace:
Thu Jun  9 18:22:12 2022 daemon.err uhttpd[1823]: #0 {main}
Thu Jun  9 18:22:12 2022 daemon.err uhttpd[1823]:   thrown in /www/rutorrent/plugins/check_port/action.php on line 75
Thu Jun  9 18:30:49 2022 authpriv.info dropbear[4390]: Child connection from 192.168.1.4:50943
Thu Jun  9 18:30:53 2022 authpriv.notice dropbear[4390]: Password auth succeeded for 'root' from 192.168.1.4:50943
Thu Jun  9 18:39:46 2022 daemon.err uhttpd[1823]: PHP Fatal error:  Uncaught Error: Call to undefined function session_start() in /www/rutorrent/plugins/check_port/action.php:75
Thu Jun  9 18:39:46 2022 daemon.err uhttpd[1823]: Stack trace:
Thu Jun  9 18:39:46 2022 daemon.err uhttpd[1823]: #0 {main}
Thu Jun  9 18:39:46 2022 daemon.err uhttpd[1823]:   thrown in /www/rutorrent/plugins/check_port/action.php on line 75
Thu Jun  9 18:53:38 2022 authpriv.info dropbear[4390]: Exit (root) from <192.168.1.4:50943>: Exited normally
Thu Jun  9 19:07:23 2022 user.info : luci: failed login on / for rogal from 89.77.118.138
Thu Jun  9 19:17:12 2022 authpriv.info dropbear[6376]: Child connection from 5.184.104.223:30882
Thu Jun  9 19:17:13 2022 authpriv.notice dropbear[6376]: Password auth succeeded for 'root' from 5.184.104.223:30882
Thu Jun  9 19:17:13 2022 authpriv.info dropbear[6376]: Exit (root) from <5.184.104.223:30882>: Exited normally
Thu Jun  9 19:17:13 2022 authpriv.info dropbear[6379]: Child connection from 5.184.104.223:13406
Thu Jun  9 19:17:14 2022 authpriv.notice dropbear[6379]: Password auth succeeded for 'root' from 5.184.104.223:13406
Thu Jun  9 19:17:38 2022 authpriv.info dropbear[6379]: Exit (root) from <5.184.104.223:13406>: Error reading: Connection reset by peer
Thu Jun  9 19:18:02 2022 authpriv.info dropbear[6425]: Child connection from 89.77.118.138:13874
Thu Jun  9 19:18:09 2022 authpriv.warn dropbear[6425]: User 'rogal' has invalid shell, rejected
Thu Jun  9 19:18:10 2022 authpriv.info dropbear[6425]: Exit before auth from <89.77.118.138:13874>: (user 'rogal', 1 fails): Exited normally
Thu Jun  9 19:18:28 2022 authpriv.info dropbear[6447]: Child connection from 89.77.118.138:13876
Thu Jun  9 19:18:28 2022 authpriv.notice dropbear[6447]: Password auth succeeded for 'root' from 89.77.118.138:13876
Thu Jun  9 19:19:42 2022 authpriv.info dropbear[6447]: Exit (root) from <89.77.118.138:13876>: Exited normally
Thu Jun  9 19:19:44 2022 authpriv.info dropbear[6514]: Child connection from 89.77.118.138:13881
Thu Jun  9 19:19:45 2022 authpriv.notice dropbear[6514]: Password auth succeeded for 'root' from 89.77.118.138:13881
Thu Jun  9 19:19:48 2022 authpriv.info dropbear[6514]: Exit (root) from <89.77.118.138:13881>: Exited normally
Thu Jun  9 19:21:24 2022 user.info : luci: accepted login on / for root from 192.168.1.4
Thu Jun  9 19:32:00 2022 authpriv.info dropbear[6793]: Child connection from 141.98.10.175:47898
Thu Jun  9 19:32:00 2022 authpriv.info dropbear[6793]: Exit before auth from <141.98.10.175:47898>: Exited normally
Thu Jun  9 19:35:35 2022 authpriv.info dropbear[6830]: Child connection from 5.184.104.223:15729
Thu Jun  9 19:35:36 2022 authpriv.notice dropbear[6830]: Password auth succeeded for 'root' from 5.184.104.223:15729
Thu Jun  9 19:35:37 2022 authpriv.info dropbear[6830]: Exit (root) from <5.184.104.223:15729>: Exited normally
Thu Jun  9 19:35:38 2022 authpriv.info dropbear[6832]: Child connection from 5.184.104.223:15423
Thu Jun  9 19:35:39 2022 authpriv.notice dropbear[6832]: Password auth succeeded for 'root' from 5.184.104.223:15423
Thu Jun  9 19:35:46 2022 authpriv.info dropbear[6832]: Exit (root) from <5.184.104.223:15423>: Exited normally
Thu Jun  9 19:37:41 2022 authpriv.info dropbear[6852]: Child connection from 192.168.1.4:51706
Thu Jun  9 19:37:45 2022 authpriv.notice dropbear[6852]: Password auth succeeded for 'root' from 192.168.1.4:51706
Thu Jun  9 19:38:01 2022 authpriv.info dropbear[6852]: Exit (root) from <192.168.1.4:51706>: Exited normally
Thu Jun  9 19:38:09 2022 authpriv.info dropbear[6867]: Child connection from 192.168.1.4:51707
Thu Jun  9 19:38:16 2022 authpriv.notice dropbear[6867]: Password auth succeeded for 'root' from 192.168.1.4:51707
root@OpenWrt:~#


Hostname    OpenWrt
Model    ZyXEL NSA310b
Architecture    Feroceon 88FR131 rev 1 (v5l)
Target Platform    kirkwood/generic
Firmware Version    OpenWrt 21.02.3 r16554-1d4dea6d4f / LuCI openwrt-21.02 branch git-22.083.69138-0a0ce2a
Kernel Version    5.4.188

Wersja ze strony openwrt.

Idź do forum: Oprogramowanie / Software

21 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

Tak, mam.
Cały dysk zamontowany. Dodam, że są już na nim pliki ściągnięte przez rtorrent.
https://i.imgur.com/bTba9gy.png

Idź do forum: Oprogramowanie / Software

22 Odpowiedź przez rogales

(49 odpowiedzi, napisanych Oprogramowanie / Software)

Witajcie.
Chciałbym prosić Was o radę.

Zainstalowałem i skonfigurowałem kmsbd według https://eko.one.pl/?p=openwrt-samba

Mój /etc/config/ksmbd wygląda następująco:

 
config globals
        option workgroup 'WORKGROUP'
        option description 'Ksmbd on OpenWrt'

config share
        option name 'nas'
        option path '/home/files'
        option read_only 'no'
        option users 'rogal'
        option guest_ok 'no'
        option create_mask '0700'
        option dir_mask '0700'

Problem polega na tym, że w środowisku Windows (10 i 7) widzę tylko urządzenie OpenWrt, lecz gdy chcę wejść, to niestety wyskakuje błąd sieciowy, tj. system nie może uzyskać dostępu do tego środowiska sieciowego.
Dodam, że na androidzie w ogóle nie wyszukuje tego urządzenia. Próba ręcznego dodania również nie działa.

Co mogę robić źle? Za wszelkie wskazówki, dziękuję.

Idź do forum: Oprogramowanie / Software

23 Odpowiedź przez rogales

(41 odpowiedzi, napisanych Oprogramowanie / Software)

Dziękuję Cezary, śmiga!

Idź do forum: Oprogramowanie / Software

24 Odpowiedź przez rogales

(41 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary, no i robiłem sporo rzeczy źle. Udało się uzyskać pomoc na innym forum i wszystko ruszyło.

Mam teraz tylko problem z tym, aby założyć login i hasło podczas wejścia na rutorrent.
Niestety nie znalazłem jakiegokolwiek wiersza na ten temat.
(kiedyś robiłem to na apache, ale nie sądzę, aby to miało wspólny mianownik z uhttpd)

Idź do forum: Oprogramowanie / Software

25 Odpowiedź przez rogales

(41 odpowiedzi, napisanych Oprogramowanie / Software)

Dziękuję za wskazówkę.

Idź do forum: Oprogramowanie / Software