Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez baggick
Strony 1
Czy na notebook'u też masz do 16% siłę sygnału?
Na notebook'u jakość sygnału pokazuje 12 %. Poniżej link do screen'a z programu jakim się łącze. Pokazuje on jakie osiągam przepustowaości połączenia oraz jakość syganłu.
Podłączyłem go przed chwilą bezpośrednio do portu usb w notebook'u połączenie się zestawiło. Transfer danych miałem na poziomie 2 - 2,5 Mbps.
zmieniałem mode na AT^SYSCFG=2,2,3FFFFFFF,2,1
oraz na
AT^SYSCFG=13,1,3FFFFFFF,2,1
aby wymusić połączenie po edge
Na obu ustawieniach połączenie się nie zestawia
Pod win 7 i instalacji plug and play internet działa przy takim zasięgu. Czasami są problemy w wcdma, bo faktycznie jest słaby zasięg. Jednak w edge ma dość dobry zasięg.
Sim jest bez pinu.
root@OpenWrt:~# /bin/3gtester.sh
root@OpenWrt:~# logread -f
Jan 1 01:04:01 OpenWrt cron.info crond[1208]: crond: USER root pid 2004 cmd /bin/3gtester.sh
Jan 1 01:04:02 OpenWrt user.notice 3gtester.sh: Checking for active connection wan2 (wwan0) attempting to ping 8.8.8.8 8.8.4.4
Jan 1 01:04:06 OpenWrt user.notice 3gtester.sh: Restarting connection wan2 (wwan0) using device /dev/ttyUSB2 and apn internet
Jan 1 01:04:06 OpenWrt user.notice 3gtester.sh: Using additional modem command AT^SYSCFG=2,2,3FFFFFFF,2,4
Jan 1 01:04:06 OpenWrt daemon.notice netifd: Interface 'wan2' is now down
Jan 1 01:04:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Establishing 3G modem connection in NDIS mode
Jan 1 01:04:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Script for comgt version 1.07 Rafal Drzymala 2012
Jan 1 01:04:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Try to communicate with modem
Jan 1 01:04:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking for password input request
Jan 1 01:04:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 - state: MT without password input request
Jan 1 01:04:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting device information
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - modem: HUAWEI E173
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - firmware: 11.126.16.05.264
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - IMEI: 869878005800296
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting received signal strength
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - signal strength: (5), -103 dBm, 16%
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - level: [########-2----3----5----5----6----7----8----9----$]
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking modem for NDIS support
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - NDIS mode is supported by this modem
Jan 1 01:04:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting system information
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - service state: Valid service
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - domain: Only CS service
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - roaming: Non roaming state
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - mode: WCDMA
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - SIM: Valid USIM card state
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - sub mode: WCDMA
Jan 1 01:04:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 Done!
Jan 1 01:05:01 OpenWrt cron.info crond[1208]: crond: USER root pid 2066 cmd /bin/3gtester.sh
Jan 1 01:05:02 OpenWrt user.notice 3gtester.sh: Checking for active connection wan2 (wwan0) attempting to ping 8.8.8.8 8.8.4.4
Jan 1 01:05:06 OpenWrt user.notice 3gtester.sh: Restarting connection wan2 (wwan0) using device /dev/ttyUSB2 and apn internet
Jan 1 01:05:06 OpenWrt user.notice 3gtester.sh: Using additional modem command AT^SYSCFG=2,2,3FFFFFFF,2,4
Jan 1 01:05:06 OpenWrt daemon.notice netifd: Interface 'wan2' is now down
Jan 1 01:05:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Establishing 3G modem connection in NDIS mode
Jan 1 01:05:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Script for comgt version 1.07 Rafal Drzymala 2012
Jan 1 01:05:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Try to communicate with modem
Jan 1 01:05:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking for password input request
Jan 1 01:05:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 - state: MT without password input request
Jan 1 01:05:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting device information
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - modem: HUAWEI E173
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - firmware: 11.126.16.05.264
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - IMEI: 869878005800296
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting received signal strength
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - signal strength: (4), -105 dBm, 12%
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - level: [######---2----3----5----5----6----7----8----9----$]
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking modem for NDIS support
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - NDIS mode is supported by this modem
Jan 1 01:05:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting system information
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - service state: Valid service
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - domain: Only CS service
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - roaming: Non roaming state
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - mode: WCDMA
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - SIM: Valid USIM card state
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - sub mode: WCDMA
Jan 1 01:05:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 Done!
Jan 1 01:05:54 OpenWrt daemon.info dnsmasq-dhcp[1270]: DHCPINFORM(br-lan) 192.168.1.246 74:f0:6d:96:3b:72
Jan 1 01:05:54 OpenWrt daemon.info dnsmasq-dhcp[1270]: DHCPACK(br-lan) 192.168.1.246 74:f0:6d:96:3b:72 kachna-Komputer
Jan 1 01:06:01 OpenWrt cron.info crond[1208]: crond: USER root pid 2130 cmd /bin/3gtester.sh
Jan 1 01:06:02 OpenWrt user.notice 3gtester.sh: Checking for active connection wan2 (wwan0) attempting to ping 8.8.8.8 8.8.4.4
Jan 1 01:06:06 OpenWrt user.notice 3gtester.sh: Restarting connection wan2 (wwan0) using device /dev/ttyUSB2 and apn internet
Jan 1 01:06:06 OpenWrt user.notice 3gtester.sh: Using additional modem command AT^SYSCFG=2,2,3FFFFFFF,2,4
Jan 1 01:06:06 OpenWrt daemon.notice netifd: Interface 'wan2' is now down
Jan 1 01:06:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Establishing 3G modem connection in NDIS mode
Jan 1 01:06:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Script for comgt version 1.07 Rafal Drzymala 2012
Jan 1 01:06:06 OpenWrt user.notice gcom: ndisup:ttyUSB2 Try to communicate with modem
Jan 1 01:06:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking for password input request
Jan 1 01:06:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 - state: MT without password input request
Jan 1 01:06:07 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting device information
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - modem: HUAWEI E173
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - firmware: 11.126.16.05.264
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - IMEI: 869878005800296
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting received signal strength
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - signal strength: (5), -103 dBm, 16%
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - level: [########-2----3----5----5----6----7----8----9----$]
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Checking modem for NDIS support
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 - NDIS mode is supported by this modem
Jan 1 01:06:08 OpenWrt user.notice gcom: ndisup:ttyUSB2 Getting system information
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - service state: Valid service
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - domain: Only CS service
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - roaming: Non roaming state
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - mode: WCDMA
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - SIM: Valid USIM card state
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 - sub mode: WCDMA
Jan 1 01:06:09 OpenWrt user.notice gcom: ndisup:ttyUSB2 Done!
root@OpenWrt:~# /bin/3gtester.sh
root@OpenWrt:~# comgt 01:03:12 -> -- Error Report --
comgt 01:03:12 -> ----> ^
comgt 01:03:12 -> Error @7, line 1, That's human mumbo-jumbo to me. (5)
root@OpenWrt:~# logread -f
Jan 1 01:06:01 OpenWrt cron.info crond[1207]: crond: USER root pid 2126 cmd /bin/3gtester.sh
Jan 1 01:06:02 OpenWrt user.notice 3gtester.sh: Checking for active connection wan2 (wwan0) attempting to ping 8.8.8.8 8.8.4.4
Jan 1 01:06:06 OpenWrt user.notice 3gtester.sh: Restarting connection wan2 (wwan0) using device /dev/ttyUSB2 and apn internet
Jan 1 01:06:06 OpenWrt user.notice 3gtester.sh: Using additional modem command AT^SYSCFG=2,2,3FFFFFFF,2,4
Jan 1 01:06:06 OpenWrt daemon.notice netifd: Interface 'wan2' is now down
Korzystam Orange Free na kartę
niestety modem nie chce zestawić połączenia. Cały czas mruga i nic więcej.
Wynik polecenia cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 1/800 us ( 0%), #Int= 2, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1436 Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=ff Driver=cdc_ether
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
wynik polecenia ls /dev/ttyU*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
muszę na teraz kończyć zabawę. Może wieczorem jeszcze się pobawię i jutro napiszę o efektach.
Rafciq dzięki za pomoc!
Rozkręciłem router i odrazu odpadła taka mała blaszka, która zabudowuje tył gniazda usb (pewnie kedyś modem został na siłę jakoś wepchnięty do portu). Po delikatnym "zreperowaniu" defektu modem zaczął mrugać.
Teraz muszę jakoś zestawić połączenie. Na razie cały czas mruga na niebiesko (czyli widzi jakąś sieć 3g) ale nie może zestawić połączenia.
modem nie zareagował na polecenia
echo 0 > /sys/devices/virtual/gpio/gpio6/value
i
echo 1 > /sys/devices/virtual/gpio/gpio6/value
Czy to oznacza, że nie działa port USB???
Obecnie instaluję to wszytko na mr3420 a nie na 3220 jak napisałem w temacie. Docelowo jednak chcę uruchomić zakładaną konfigurację zarówno na mr3220 jak i mr3420. Ma to znaczenie?
8.
Tak jak włączam router modem nie mruga.
1.
root@OpenWrt:/# opkg install libusb kmod-usb-net kmod-usb-serial kmod-usb-serial
-option
Package libusb (0.1.12-3) installed in root is up to date.
Package kmod-usb-net (3.3.8-1) installed in root is up to date.
Package kmod-usb-serial (3.3.8-1) installed in root is up to date.
Package kmod-usb-serial-option (3.3.8-1) installed in root is up to date.
root@OpenWrt:/# opkg install kmod-usb-serial-wwan kmod-usb-net-cdc-ether usb-mod
eswitch-data usb-modeswitch
Package kmod-usb-serial-wwan (3.3.8-1) installed in root is up to date.
Package kmod-usb-net-cdc-ether (3.3.8-1) installed in root is up to date.
Package usb-modeswitch-data (20121109-1cj) installed in root is up to date.
Package usb-modeswitch (1.2.5-1cj) installed in root is up to date.
root@OpenWrt:/# opkg install chat comgt n2n
Package chat (2.4.5-8) installed in root is up to date.
Package comgt (0.32-21) installed in root is up to date.
Package n2n (3875-4) installed in root is up to date.
2.
root@OpenWrt:/bin# ls
3gtester.sh dd gunzip mknod ping sync
ash df gzip mktemp ping6 tar
busybox dmesg ipcalc.sh mount ps touch
cat echo kill mv pwd true
chgrp egrep ln netmsg rm ubus
chmod false lock netstat rmdir umount
chown fgrep login.sh nice sed uname
cp fsync ls opkg sh vi
date grep mkdir pidof sleep zcat
root@OpenWrt:/etc/gcom# ls
getcardinfo.gcom getcnum.gcom getstrength.gcom setmode.gcom
getcarrier.gcom getimsi.gcom ndisup.gcom setpin.gcom
3.
Modem nie mruga.
4.
Orange free na kartę.
5.
root@OpenWrt:/etc/gcom# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
6.
root@OpenWrt:/etc/gcom# ls /dev/ttyU*
ls: /dev/ttyU*: No such file or directory
7.
Edytowałem option mode 'AT^SYSCFG=14,2,2000000000000,1,1' aby modem działał również w innych sieciach
option comm '/dev/ttyUSB2' zmieniłem na USB0
Nic te zmiany nie pomogły.
niestety chyba moja wiedza na temat openwrt jest za mała aby uruchomić modem usb. Po zainstalowaniu wszystkiego zgodnie z powyższą instrukcją połączenie po gsm nie działa, nawet dioda na modemie nie mruga. W jaki sposób mogę sprawdzić czy modem się prawidłowo zainstalował w openwrt?
Czy jest możliwe żeby to działało bez extroota? I czy jest może gotowy obraz do wgrania?
Strony 1
eko.one.pl → Posty przez baggick
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc
