root@OpenWrt:/# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd0d:7086:3f89::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='b8:69:f4:d3:b1:ac'
network.wan_dev=device
network.wan_dev.name='eth0.2'
network.wan_dev.macaddr='b8:69:f4:d3:b1:ad'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='dhcpv6'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='1 2 3 4 6t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0 6t'
network.wan=interface
network.wan.proto='qmi'
network.wan.device='/dev/cdc-wdm0'
network.wan.apn='internet'

root@OpenWrt:/# ifstatus wan
{
        "up": false,
        "pending": false,
        "available": true,
        "autostart": false,
        "dynamic": false,
        "proto": "qmi",
        "data": {

        },
        "errors": [
                {
                        "subsystem": "qmi",
                        "code": "PIN_STATUS_FAILED"
                }
        ]
}

kawałek z logu
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Interface 'wan6' is enabled
Tue Feb 19 00:02:13 2019 daemon.notice netifd: bridge 'br-lan' link is up
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Network device 'eth0' link is up
Tue Feb 19 00:02:13 2019 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Network device 'lo' link is up
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Feb 19 00:02:13 2019 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Tue Feb 19 00:02:13 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Tue Feb 19 00:02:13 2019 daemon.notice netifd: wan (1554): Waiting for SIM initialization
Tue Feb 19 00:02:13 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Feb 19 00:02:13 2019 daemon.err odhcp6c[1609]: Failed to send RS (Address not available)
Tue Feb 19 00:02:13 2019 daemon.err odhcp6c[1609]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Tue Feb 19 00:02:14 2019 daemon.notice netifd: wan (1554): Failed to parse message data
Tue Feb 19 00:02:14 2019 daemon.notice netifd: wan (1554): PIN status failed ()
Tue Feb 19 00:02:14 2019 kern.info kernel: [   24.116048] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Feb 19 00:02:14 2019 daemon.notice netifd: wan (1809): Stopping network wan
Tue Feb 19 00:02:14 2019 daemon.notice netifd: wan (1809): Command failed: Permission denied
Tue Feb 19 00:02:14 2019 daemon.notice netifd: Interface 'wan' is now down

root@OpenWrt:/# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.14
S:  Manufacturer=Linux 4.14.97 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=1e1c0000.xhci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=9071 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Sierra Wireless MC7455 Qualcomm® Snapdragon™ X7 LTE-A
S:  SerialNumber=LQ72140139031020
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=10 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 4.14
S:  Manufacturer=Linux 4.14.97 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=1e1c0000.xhci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
root@OpenWrt:/#

Masz gdzieś stare obrazy przed ostatnia aktualizacja

Podeślij

No problem w tym że pin wyłączony. Nawet testowałem aby go włączyć i nic to nie daje
Urządzenie oczywiście do fabryki wywalalem i to samo.

właśnie z tej strony kombinowałem

serwer postawiłem wrzucam wam konfigi bo nie łączy mnie

SERWER

#################################################
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one.  On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh2048.pem 2048
dh dh2048.pem

# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface.  Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0.  Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients.  Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses.  You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
#   iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN.  This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
#   ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients.  There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
#     group, and firewall the TUN/TAP interface
#     for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
#     modify the firewall in response to access
#     from different clients.  See man
#     page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names.  This is recommended
# only for testing purposes.  For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
#   openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that v2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC

# Enable compression on the VPN link and push the
# option to the client (v2.4+ only, for earlier
# versions see below)
;compress lz4-v2
;push "compress lz4-v2"

# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nobody

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
;log         openvpn.log
log-append  openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages.  At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20

# Notify the client that when the server restarts so it
# can automatically reconnect.
;explicit-exit-notify 1

KLIJENT

client
port 1194
remote ip serwera aruba
cipher AES-256-CBC
dev tun
proto udp
nobind
auth-nocache
persist-key
persist-tun
verb 2
key-direction 1
<ca>
-----BEGIN CERTIFICATE-----

-----END CERTIFICATE-----
</ca>
<cert>
-----BEGIN CERTIFICATE-----

-----END CERTIFICATE-----
</cert>
<key>
-----BEGIN PRIVATE KEY-----

-----END PRIVATE KEY-----
</key>

klucze powywalałem

a dostaje taki komunikat

Wed Feb 13 20:51:21 2019 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Wed Feb 13 20:51:21 2019 TLS Error: TLS handshake failed
Wed Feb 13 20:51:21 2019 SIGUSR1[soft,tls-error] received, process restarting
Wed Feb 13 20:52:28 2019 SIGHUP[hard,init_instance] received, process restarting
Wed Feb 13 20:52:28 2019 OpenVPN 2.4.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Apr 26 2018
Wed Feb 13 20:52:28 2019 Windows version 6.2 (Windows 8 or greater) 64bit
Wed Feb 13 20:52:28 2019 library versions: OpenSSL 1.1.0h  27 Mar 2018, LZO 2.10
Wed Feb 13 20:52:33 2019 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.
Wed Feb 13 20:52:33 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]89.40.117.63:1194
Wed Feb 13 20:52:33 2019 UDP link local: (not bound)
Wed Feb 13 20:52:33 2019 UDP link remote: [AF_INET]89.40.117.63:1194

no właśnie RSRP 106 - co ma na to wpływ - jak to poprawić bo jak majstruję anteną mam wrazenie że ten parametr stoii

Podłączenie drugiego modemu narazie odpuściłem czekam na lepszą pogodę bo sprzęt jest już na dachu. Mam inne pytanie jak najszybciej i najprościej dostać się do mojego monitoringu z telefonu na androidzie. Niestety tmobile nie daje adresu publicznego jak to obejść aby było łatwe i przyjemne na andku.

poszło na takich ustawieniach

root@OpenWrt:/# vi /dev/config/network
config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '0 1 2 3 4 6t'
        option vid '1'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '6t'
        option vid '2'

config interface 'wan'
        option proto 'qmi'
        option device '/dev/cdc-wdm0'
        option apn 'internet'
        option modes 'lte:'

coś mi nie chce się pozmieniać - to moja konfiguracja
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd38:504d:b596::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0.1'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config device 'lan_dev'
        option name 'eth0.1'
        option macaddr 'b8:69:f4:d3:b1:ac'

config device 'wan_dev'
        option name 'eth0.2'
        option macaddr 'b8:69:f4:d3:b1:ad'

config interface 'wan6'
        option ifname 'eth0.2'
        option proto 'dhcpv6'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 6t'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '0 6t'

config interface 'wan'
        option proto 'qmi'
        option device '/dev/cdc-wdm0'
        option apn 'internet'
        option modes 'lte'

Ja chcę mieć na porcie:0 nie wan tylko LAN

link: port:0 link:down
        link: port:1 link:up speed:100baseT full-duplex
        link: port:2 link:down
        link: port:3 link:down
        link: port:4 link:down
        link: port:5 link:down
        link: port:6 link:up speed:1000baseT full-duplex
        link: port:7 link:down

co po kolei wklepać:

drugi modem mam obecnie na 912uag tj. Huwawei me909s-120. Ja sobie ogarnę obudowę do M33G będe docelowo ten modem chciał włożyć.

dhcp mi nic nie daje - jak skonfiguruję kartę recznie działa internet. Odrazu mam pytanie z openwrt jest dostęp do AT płytki, chodzi mi o zmiany pasm agregacji..... itp: sprawdzanie sygnału, parametrów łacza. Bede jak coś za 2-3 godziny

Dobra wróciłem do QMi. Tak jak pisałem w MC7455 był problem z firmware. A drugi problem to zbyt cienka taśma wszystko mi głupiało. Obecnie widze ze mam na wan adres internetowy - bynajmniej przrz interfejs graficzny ali nie mam przydziału dhcp a nie chce nic popsuc