176 Temat przez tinware

(4 odpowiedzi, napisanych Oprogramowanie / Software)

Cześć,

Dzisiaj parę minut po 8:00 straciłem połączenie VPN z moim routerem.
Na miejscu po 17:00 okazało się, że sieć WiFi nie jest rozgłaszana, nie mogę połączyć się przez rj45 (linkuje się tylko).
Podobna awaria już się zdarzała, resetowałem z zasilania, tym razem połączyłem się przez konsole, poniżej to co zobaczyłem:


dmesg: 

[   69.163113] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[   70.230768] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[   70.237684] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[   70.244566] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[   70.251450] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[32367.094767] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
[32518.323469] mtk_soc_eth 1e100000.ethernet eth0: port 0 link down

logread: 

Thu Nov  5 08:25:45 2020 daemon.notice hostapd: wlan0-1: interface state ENABLED->DISABLED
Thu Nov  5 08:25:45 2020 daemon.notice hostapd: wlan0-1: AP-DISABLED
Thu Nov  5 08:25:45 2020 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Thu Nov  5 08:25:45 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0-1 disabled_11b_rates=0
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.171115] hotspot: deauthenticating from 00:02:03:04:05:06 by local choice (Reason: 3=DEAUTH_LEAVING)
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'MOJA_NAZWA' is now down
Thu Nov  5 08:25:46 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: [server] Inactivity timeout (--ping-restart), restarting
Thu Nov  5 08:25:46 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: SIGUSR1[soft,ping-restart] received, process restarting
Thu Nov  5 08:25:46 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: Restart pause, 1 second(s)
Thu Nov  5 08:25:46 2020 daemon.notice wpa_supplicant[3105]: hotspot: CTRL-EVENT-DISCONNECTED bssid=00:02:03:04:05:06 reason=3 locally_generated=1
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.492313] device wlan0-1 left promiscuous mode
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.497102] br-lan: port 2(wlan0-1) entered disabled state
Thu Nov  5 08:25:46 2020 daemon.notice wpa_supplicant[3105]: nl80211: deinit ifname=hotspot disabled_11b_rates=0
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'MOJA_NAZWA' is disabled
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Aero2a (2476): udhcpc: received SIGTERM
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2a' is now down
Thu Nov  5 08:25:46 2020 daemon.notice wpa_supplicant[3105]: hotspot: CTRL-EVENT-TERMINATING
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: reading /tmp/resolv.conf.auto
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain test
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain onion
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain localhost
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain local
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain invalid
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain bind
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using standard nameservers for domain bdi.free.aero2.net.pl
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using nameserver IP.VPN.IP.VPN#53 for domain vpn
Thu Nov  5 08:25:46 2020 daemon.info dnsmasq[5624]: using local addresses only for domain lan
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Aero2b (2178): udhcpc: received SIGTERM
Thu Nov  5 08:25:46 2020 daemon.warn dnsmasq[5624]: ignoring nameserver 192.168.211.1 - local interface
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Aero2c (3248): udhcpc: received SIGTERM
Thu Nov  5 08:25:46 2020 daemon.notice netifd: HotSPOT (5729): udhcpc: sending renew to 192.168.203.1
Thu Nov  5 08:25:46 2020 daemon.notice netifd: HotSPOT (5729): udhcpc: received SIGTERM
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2b' is now down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2b' is disabled
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2c' is now down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2c' is disabled
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'HotSPOT' is now down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'HotSPOT' is disabled
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Network device 'hotspot' link is down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'HotSPOT' has link connectivity loss
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Network device 'wlan0-1' link is down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Network device 'tun0' link is down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'MOJA_NAZWA' has link connectivity loss
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Network device 'usb2~if0' link is down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2b' has link connectivity loss
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Network device 'usb3~if0' link is down
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'Aero2c' has link connectivity loss
Thu Nov  5 08:25:46 2020 daemon.notice netifd: RedBull_1 (2202): udhcpc: received SIGTERM
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'lan' is now down
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.654643] br-lan: port 1(eth0.1) entered disabled state
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.669065] device eth0.1 left promiscuous mode
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.674243] br-lan: port 1(eth0.1) entered disabled state
Thu Nov  5 08:25:46 2020 kern.info kernel: [   68.763264] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'lan' is disabled
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'RedBull_1' is now down
Thu Nov  5 08:25:46 2020 daemon.warn dnsmasq[5624]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Nov  5 08:25:46 2020 kern.info kernel: [   69.044575] device eth0 left promiscuous mode
Thu Nov  5 08:25:46 2020 daemon.notice netifd: Interface 'RedBull_1' is disabled
Thu Nov  5 08:25:46 2020 kern.info kernel: [   69.163113] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Thu Nov  5 08:25:46 2020 daemon.notice netifd: VLAN 'eth0.1' link is down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Interface 'loopback' is now down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Interface 'loopback' is disabled
Thu Nov  5 08:25:47 2020 daemon.notice netifd: bridge 'br-lan' link is down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Interface 'lan' has link connectivity loss
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Network device 'eth0' link is down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: VLAN 'eth0.2' link is down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Interface 'RedBull_1' has link connectivity loss
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Network device 'lo' link is down
Thu Nov  5 08:25:47 2020 daemon.notice netifd: Interface 'loopback' has link connectivity loss
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: TCP/UDP: Preserving recently used remote address: [AF_INET]IP.VPS.IP.VPS:1194
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: Socket Buffers: R=[163840->163840] S=[163840->163840]
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: UDP link local: (not bound)
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: UDP link remote: [AF_INET]IP.VPS.IP.VPS:1194
Thu Nov  5 08:25:47 2020 daemon.err openvpn(MOJA_NAZWA_test_1)[6320]: write UDP: Network unreachable (code=128)
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: Network unreachable, restarting
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: SIGUSR1[soft,network-unreachable] received, process restarting
Thu Nov  5 08:25:47 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: Restart pause, 1 second(s)
Thu Nov  5 08:25:47 2020 daemon.info modprobe: Usage:   modprobe [-q] filename
Thu Nov  5 08:25:47 2020 daemon.err modprobe: ifb is already loaded
Thu Nov  5 08:25:47 2020 daemon.err modprobe: cls_u32 is already loaded
Thu Nov  5 08:25:47 2020 daemon.err modprobe: em_u32 is already loaded
Thu Nov  5 08:25:47 2020 daemon.err modprobe: act_connmark is already loaded
Thu Nov  5 08:25:47 2020 daemon.err modprobe: act_mirred is already loaded
Thu Nov  5 08:25:47 2020 daemon.err modprobe: sch_ingress is already loaded
Thu Nov  5 08:25:48 2020 daemon.err modprobe: cls_fw is already loaded
Thu Nov  5 08:25:48 2020 daemon.err modprobe: sch_hfsc is already loaded
Thu Nov  5 08:25:48 2020 daemon.notice netifd: Network device 'usb2~if0' link is up
Thu Nov  5 08:25:48 2020 daemon.notice netifd: Interface 'Aero2b' has link connectivity
Thu Nov  5 08:25:48 2020 kern.err kernel: [   70.230768] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
Thu Nov  5 08:25:48 2020 kern.err kernel: [   70.237684] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
Thu Nov  5 08:25:48 2020 kern.err kernel: [   70.244566] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
Thu Nov  5 08:25:48 2020 kern.err kernel: [   70.251450] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
Thu Nov  5 08:25:48 2020 daemon.info dnsmasq[5624]: exiting on receipt of SIGTERM
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: started, version 2.80 cachesize 150
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: DNS service limited to local subnets
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain test
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain onion
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain localhost
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain local
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain invalid
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain bind
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using standard nameservers for domain bdi.free.aero2.net.pl
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using nameserver IP.VPN.IP.VPN#53 for domain vpn
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: using local addresses only for domain lan
Thu Nov  5 08:25:49 2020 daemon.warn dnsmasq[8041]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: read /etc/hosts - 4 addresses
Thu Nov  5 08:25:49 2020 daemon.info dnsmasq[8041]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov  5 08:25:51 2020 user.notice mwan3[7029]: Execute ifup event on interface Aero2b (usb2~if0)
Thu Nov  5 08:25:52 2020 user.notice mwan3[7029]: Starting tracker on interface Aero2b (usb2~if0)
Thu Nov  5 08:25:53 2020 daemon.err openvpn(MOJA_NAZWA_test_1)[6320]: RESOLVE: Cannot resolve host address: ak.domena.com:1194 (Try again)
Thu Nov  5 08:25:53 2020 user.info mwan3rtmon[3568]: Detect rtchange event.
Thu Nov  5 08:25:53 2020 user.notice firewall: Reloading firewall due to ifup of Aero2b (usb2~if0)
Thu Nov  5 08:25:58 2020 daemon.err openvpn(MOJA_NAZWA_test_1)[6320]: RESOLVE: Cannot resolve host address: ak.domena.com:1194 (Try again)
Thu Nov  5 08:25:58 2020 daemon.warn openvpn(MOJA_NAZWA_test_1)[6320]: Could not determine IPv4/IPv6 protocol
Thu Nov  5 08:25:58 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: /sbin/route del -net 192.168.192.0 netmask 255.255.192.0
Thu Nov  5 08:25:58 2020 daemon.warn openvpn(MOJA_NAZWA_test_1)[6320]: ERROR: Linux route delete command failed: external program exited with error status: 1
Thu Nov  5 08:25:58 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: Closing TUN/TAP interface
Thu Nov  5 08:25:58 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: /sbin/ifconfig tun0 0.0.0.0
Thu Nov  5 08:25:58 2020 daemon.warn dnsmasq[8041]: failed to create listening socket for fe80::5634:71a3:82b5:a9b0: No such device
Thu Nov  5 08:25:58 2020 daemon.warn dnsmasq[8041]: failed to create listening socket for fe80::5634:71a3:82b5:a9b0: No such device
Thu Nov  5 08:25:58 2020 daemon.notice openvpn(MOJA_NAZWA_test_1)[6320]: SIGHUP[hard,close_context usr1 to hup] received, process restarting
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[8041]: exiting on receipt of SIGTERM
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: started, version 2.80 cachesize 150
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: DNS service limited to local subnets
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain test
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain onion
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain localhost
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain local
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain invalid
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain bind
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using standard nameservers for domain bdi.free.aero2.net.pl
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using nameserver IP.VPN.IP.VPN#53 for domain vpn
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: using local addresses only for domain lan
Thu Nov  5 08:25:59 2020 daemon.warn dnsmasq[9851]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: read /etc/hosts - 4 addresses
Thu Nov  5 08:25:59 2020 daemon.info dnsmasq[9851]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov  5 08:26:05 2020 daemon.info procd: Instance openvpn::MOJA_NAZWA_test_1 pid 6320 not stopped on SIGTERM, sending SIGKILL instead
Thu Nov  5 08:26:14 2020 daemon.info procd: Instance samba::instance2 s in a crash loop 6 crashes, 0 seconds since last crash
Thu Nov  5 08:26:14 2020 daemon.info procd: Instance samba::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
Thu Nov  5 08:26:20 2020 daemon.notice procd: /etc/init.d/network: Command failed: Request timed out
Thu Nov  5 08:26:33 2020 cron.err crond[2878]: time disparity of 118 minutes detected
Thu Nov  5 17:24:04 2020 kern.info kernel: [32367.094767] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
Thu Nov  5 17:26:36 2020 kern.info kernel: [32518.323469] mtk_soc_eth 1e100000.ethernet eth0: port 0 link down

ps

  PID USER       VSZ STAT COMMAND
    1 root      1576 S    /sbin/procd
    2 root         0 SW   [kthreadd]
    4 root         0 IW<  [kworker/0:0H]
    5 root         0 IW   [kworker/u8:0]
    6 root         0 IW<  [mm_percpu_wq]
    7 root         0 SW   [ksoftirqd/0]
    8 root         0 IW   [rcu_sched]
    9 root         0 IW   [rcu_bh]
   10 root         0 SW   [migration/0]
   11 root         0 SW   [cpuhp/0]
   12 root         0 SW   [cpuhp/1]
   13 root         0 SW   [migration/1]
   14 root         0 SW   [ksoftirqd/1]
   16 root         0 IW<  [kworker/1:0H]
   17 root         0 SW   [cpuhp/2]
   18 root         0 SW   [migration/2]
   19 root         0 SW   [ksoftirqd/2]
   21 root         0 IW<  [kworker/2:0H]
   22 root         0 SW   [cpuhp/3]
   23 root         0 SW   [migration/3]
   24 root         0 SW   [ksoftirqd/3]
   25 root         0 IW   [kworker/3:0]
   26 root         0 IW<  [kworker/3:0H]
   31 root         0 IW   [kworker/u8:2]
   71 root         0 IW   [kworker/2:1]
  140 root         0 IW   [kworker/1:1]
  141 root         0 SW   [oom_reaper]
  142 root         0 IW<  [writeback]
  144 root         0 SW   [kcompactd0]
  145 root         0 IW<  [crypto]
  147 root         0 IW<  [kblockd]
  181 root         0 IW<  [watchdogd]
  205 root         0 SW   [kswapd0]
  263 root         0 IW<  [pencrypt]
  265 root         0 IW<  [pdecrypt]
  299 root         0 SW   [spi0]
  359 root         0 IW<  [ipv6_addrconf]
  368 root         0 IW<  [kworker/0:1H]
  369 root         0 IW<  [kworker/1:1H]
  371 root         0 IW<  [kworker/3:1H]
  372 root         0 IW<  [kworker/2:1H]
  410 root         0 IW<  [ata_sff]
  422 root         0 SW   [scsi_eh_0]
  423 root         0 IW<  [scsi_tmf_0]
  426 root         0 SW   [scsi_eh_1]
  427 root         0 IW<  [scsi_tmf_1]
  469 root         0 IW   [kworker/1:2]
  507 root         0 SW   [scsi_eh_2]
  508 root         0 IW<  [scsi_tmf_2]
  509 root         0 SW   [usb-storage]
  532 root         0 SW   [scsi_eh_3]
  533 root         0 IW<  [scsi_tmf_3]
  534 root         0 SW   [usb-storage]
  543 root         0 SW   [scsi_eh_4]
  544 root         0 IW<  [scsi_tmf_4]
  545 root         0 SW   [usb-storage]
  596 root         0 SWN  [jffs2_gcd_mtd6]
  675 root      1236 S    /sbin/ubusd
  677 root      1224 S    /bin/ash --login
  709 root      1032 S    /sbin/urngd
  877 root         0 IW<  [cfg80211]
 1033 root      1296 S    /sbin/logd -S 64
 1064 root      2108 S    /sbin/rpcd -s /var/run/ubus.sock -t 30
 1185 root         0 IW   [kworker/2:2]
 1246 root      1084 S    /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
 2197 root      1448 S    /bin/sh /usr/bin/travelmate.sh
 2330 root         0 IW   [kworker/3:2]
 2382 root      1460 S    /usr/sbin/odhcpd
 2878 root      1220 S    /usr/sbin/crond -f -c /etc/crontabs -l 5
 3568 root      1420 S    /bin/sh /usr/sbin/mwan3rtmon
 4047 root         0 IW   [kworker/0:0]
 5957 root      3916 S    /usr/sbin/uhttpd -f -h /www -r Test-1 -x /cgi-bin -t
 6768 root      1220 S<   /usr/sbin/ntpd -n -N -l -S /usr/sbin/ntpd-hotplug -p
 8632 root      1340 S    /bin/sh /usr/sbin/mwan3track Aero2b usb2~if0 offline
 9196 root         0 IW   [kworker/0:1]
 9851 dnsmasq   1348 S    /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
10728 root      3976 S    /usr/sbin/openvpn --syslog openvpn(MOJA_NAZWA_test_
14576 root         0 IW   [kworker/0:3]
15556 root         0 IW   [kworker/0:2]
17365 root      1216 S    /bin/sleep 5
17374 root      1216 S    /bin/sleep 6
17457 root      1220 S    sleep 4
18068 root      1216 S    /bin/sleep 7
18153 root      1288 S    sleep 1
18161 root      1216 S    sleep 5
18167 root      1216 S    /bin/sleep 1
18168 root      1216 R    ps
32732 root         0 IW   [kworker/0:4]

ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether 70:b3:d5:10:00:82 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::72b3:d5ff:fe10:82/64 scope link
       valid_lft forever preferred_lft forever
3: ifb0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc hfsc state UNKNOWN group default qlen 32
    link/ether 92:d7:67:81:40:de brd ff:ff:ff:ff:ff:ff
    inet6 fe80::90d7:67ff:fe81:40de/64 scope link
       valid_lft forever preferred_lft forever
4: ifb1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc hfsc state UNKNOWN group default qlen 32
    link/ether 5a:21:c7:4c:86:08 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::5821:c7ff:fe4c:8608/64 scope link
       valid_lft forever preferred_lft forever
5: usb2~if0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc hfsc state UNKNOWN group default qlen 1000
    link/ether 0c:5b:8f:27:9a:64 brd ff:ff:ff:ff:ff:ff
    inet 192.168.211.212/29 brd 192.168.211.215 scope global usb2~if0
       valid_lft forever preferred_lft forever
    inet6 fe80::e5b:8fff:fe27:9a64/64 scope link
       valid_lft forever preferred_lft forever
6: usb1~if0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc hfsc state UNKNOWN group default qlen 1000
    link/ether 0c:5b:8f:27:9a:64 brd ff:ff:ff:ff:ff:ff
    inet 192.168.211.202/28 brd 192.168.211.207 scope global usb1~if0
       valid_lft forever preferred_lft forever
    inet6 fe80::e5b:8fff:fe27:9a64/64 scope link
       valid_lft forever preferred_lft forever
7: usb3~if0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc hfsc state UNKNOWN group default qlen 1000
    link/ether 0c:5b:8f:27:9a:64 brd ff:ff:ff:ff:ff:ff
    inet 192.168.211.219/29 brd 192.168.211.223 scope global usb3~if0
       valid_lft forever preferred_lft forever
    inet6 fe80::e5b:8fff:fe27:9a64/64 scope link
       valid_lft forever preferred_lft forever
16: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 70:b3:d5:10:00:82 brd ff:ff:ff:ff:ff:ff
    inet 192.168.211.1/25 brd 192.168.211.127 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fe80::72b3:d5ff:fe10:82/64 scope link
       valid_lft forever preferred_lft forever
17: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
    link/ether 70:b3:d5:10:00:82 brd ff:ff:ff:ff:ff:ff
18: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 70:b3:d5:10:00:83 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::72b3:d5ff:fe10:83/64 scope link
       valid_lft forever preferred_lft forever
20: wlan0-1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
    link/ether 00:0c:43:26:63:21 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::20c:43ff:fe26:6321/64 scope link
       valid_lft forever preferred_lft forever
21: hotspot: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether f8:62:aa:60:02:a2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.203.52/25 brd 192.168.203.127 scope global hotspot
       valid_lft forever preferred_lft forever
    inet6 fe80::fa62:aaff:fe60:2a2/64 scope link
       valid_lft forever preferred_lft forever
22: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 100
    link/none
    inet IP.VPN.IP.VPN/18 brd 192.168.191.255 scope global tun0
       valid_lft forever preferred_lft forever
    inet6 fe80::d8f:881b:ed41:273a/64 scope link stable-privacy
       valid_lft forever preferred_lft forever

Jak przywróciłem pracę routera:

/etc/init.d/network restart
Command failed: Not found

/etc/init.d/openvpn restart

/etc/init.d/network restart
Command failed: Not found

[36981.158308] mtk_soc_eth 1e100000.ethernet: PPE started
[36981.170183] br-lan: port 1(eth0.1) entered blocking state
[36981.175708] br-lan: port 1(eth0.1) entered disabled state
[36981.181933] device eth0.1 entered promiscuous mode
[36981.186883] device eth0 entered promiscuous mode
[36981.194990] br-lan: port 1(eth0.1) entered blocking state
[36981.200458] br-lan: port 1(eth0.1) entered forwarding state
[36981.206651] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[36981.222377] cdc_ether 1-2.2:1.0 usb1~if0: kevent 12 may have been dropped
[36981.229351] cdc_ether 1-2.2:1.0 usb1~if0: kevent 12 may have been dropped
[36981.236350] cdc_ether 1-2.2:1.0 usb1~if0: kevent 12 may have been dropped
[36981.243263] cdc_ether 1-2.2:1.0 usb1~if0: kevent 12 may have been dropped
[36981.253257] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[36981.260096] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[36981.266967] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[36981.273856] cdc_ether 1-2.1:1.0 usb2~if0: kevent 12 may have been dropped
[36981.285768] cdc_ether 1-2.3:1.0 usb3~if0: kevent 12 may have been dropped
[36981.292681] cdc_ether 1-2.3:1.0 usb3~if0: kevent 12 may have been dropped
[36982.216087] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[36982.965865] IPv6: ADDRCONF(NETDEV_UP): hotspot: link is not ready
[36983.033951] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[36983.047337] br-lan: port 2(wlan0-1) entered blocking state
[36983.052880] br-lan: port 2(wlan0-1) entered disabled state
[36983.065995] device wlan0-1 entered promiscuous mode
[36983.071490] br-lan: port 2(wlan0-1) entered blocking state
[36983.077118] br-lan: port 2(wlan0-1) entered forwarding state
[36983.224316] br-lan: port 2(wlan0-1) entered disabled state
[36983.772136] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[36983.779206] br-lan: port 2(wlan0-1) entered blocking state
[36983.784850] br-lan: port 2(wlan0-1) entered forwarding state
[36988.277779] hotspot: authenticate with 00:02:03:04:05:06
[36988.574295] hotspot: send auth to 00:02:03:04:05:06 (try 1/3)
[36993.687140] hotspot: send auth to 00:02:03:04:05:06 (try 2/3)
[36993.693787] hotspot: aborting authentication with 00:02:03:04:05:06 by local choice (Reason: 3=DEAUTH_LEAVING)
[36998.335934] hotspot: authenticate with 00:02:03:04:05:06
[36998.633482] hotspot: send auth to 00:02:03:04:05:06 (try 1/3)
[36998.811941] hotspot: send auth to 00:02:03:04:05:06 (try 2/3)
[36998.988359] hotspot: send auth to 00:02:03:04:05:06 (try 3/3)
[36999.134065] hotspot: authentication with 00:02:03:04:05:06 timed out
[37009.505889] hotspot: authenticate with 00:02:03:04:05:06
[37009.803890] hotspot: send auth to 00:02:03:04:05:06 (try 1/3)
[37010.023488] hotspot: send auth to 00:02:03:04:05:06 (try 2/3)
[37010.226681] hotspot: send auth to 00:02:03:04:05:06 (try 3/3)
[37010.354895] hotspot: authentication with 00:02:03:04:05:06 timed out
[37015.986902] hotspot: authenticate with 00:02:03:04:05:06
[37016.283454] hotspot: send auth to 00:02:03:04:05:06 (try 1/3)
[37016.474047] hotspot: send auth to 00:02:03:04:05:06 (try 2/3)
[37016.706713] hotspot: send auth to 00:02:03:04:05:06 (try 3/3)
[37016.882649] hotspot: authentication with 00:02:03:04:05:06 timed out
[37027.138799] IPv6: ADDRCONF(NETDEV_UP): hotspot: link is not ready
[37032.128885] hotspot: authenticate with 00:02:03:04:05:06
[37032.425033] hotspot: send auth to 00:02:03:04:05:06 (try 1/3)
[37032.435041] hotspot: authenticated
[37032.443490] hotspot: associate with 00:02:03:04:05:06 (try 1/3)
[37032.454218] hotspot: RX AssocResp from 00:02:03:04:05:06 (capab=0x431 status=0 aid=3)
[37032.462933] hotspot: associated
[37032.481166] IPv6: ADDRCONF(NETDEV_CHANGE): hotspot: link becomes ready

Idź do forum: Oprogramowanie / Software

177 Temat przez tinware

(2 odpowiedzi, napisanych Sprzęt / Hardware)

Cześć,

Podłączyłem poniższy zestaw do routera:

https://images90.fotosik.pl/437/793e871b40337b34gen.jpg

I czytam: 

# picocom -b 50 /dev/ttyUSB0
picocom v3.1

port is        : /dev/ttyUSB0
flowcontrol    : none
baudrate is    : 50
parity is      : none
databits are   : 8
stopbits are   : 1
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
hangup is      : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv -E
imap is        :
omap is        :
emap is        : crcrlf,delbs,
logfile is     : none
initstring     : none
exit_after is  : not set
exit is        : no

Type [C-a] [C-h] to see available commands
Terminal ready

*** baud: 75 ***

*** baud: 110 ***

*** baud: 134 ***

*** baud: 150 ***

*** baud: 200 ***

*** baud: 300 ***

*** baud: 600 ***

*** baud: 1200 ***

*** baud: 1800 ***

*** baud: 2400 ***

*** baud: 4800 ***

*** baud: 9600 ***

*** baud: 19200 ***

*** baud: 38400 ***

*** baud: 57600 ***

*** baud: 115200 ***

*** baud: 230400 ***

*** baud: 460800 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 500000 ***
▒▒▒▒▒▒▒
*** baud: 576000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 921600 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 1000000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 1152000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 1500000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 2000000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 2500000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 3000000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 3500000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
*** baud: 4000000 ***
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Terminating...
Skipping tty reset...
Thanks for using picocom

Wyjście CAN z płytki podłączony do magistrali komfort VAG, na której znajduje się gateway (zdjęcie) i sterownik przyczepy.

https://images91.fotosik.pl/436/fb3bc6761752dc52gen.jpg

Zastanawiam się, czy dobrze podchodzę do tematu. Podłączyłem oscyloskop do GND i HIGH magistrali i widzę przebieg prostokątny ok. 20kHz i amplitudzie 5V.

Czemu takie krzaki w konsoli?

Idź do forum: Sprzęt / Hardware

178 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Ok, czyli drugą kartę w trybie STA ustawiam tak:

# kanał auto
config wifi-iface 'wwan_1'
        option device 'radio1'
        option network 'HotSPOT'
        option mode 'sta'
        option ssid 'NAWA-HotSPOT'
        option key 'HASŁO'
        option encryption 'psk-mixed+tkip+ccmp'


Sieć "NAZWA-HotSPOT" jest siecią ukrytą (i nie chce aby była widoczną), travelmate nie potrafi się z nią połączyć. Działa to tylko ręcznie:

uci set wireless.wwan_1.disabled='0'
uci commit wireless
wifi


Czyli jedynym rozwiązaniem dla mnie jest:

# kanał auto
config wifi-iface 'wwan_1'
        option ssid 'NAWA'
        option bssid '00:00:00:00:00:01'
        (...)

config wifi-iface 'wwan_2'
        option ssid 'NAWA'
        option bssid '00:00:00:00:00:02'
        (...)

config wifi-iface 'wwan_3'
        option ssid 'NAWA'
        option bssid '00:00:00:00:00:03'
        (...)

config wifi-iface 'wwan_4'
        option ssid 'NAWA'
        option bssid '00:00:00:00:00:04'
        (...)

config wifi-iface 'wwan_5'
        option ssid 'NAWA'
        option bssid '00:00:00:00:00:05'
        (...)

Idź do forum: Oprogramowanie / Software

179 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Zgadza się, ale szukam czegoś w rodzaju

option not_bssid

aby router łączył się ze wszystkimi, oprócz sam ze sobą

Idź do forum: Oprogramowanie / Software

180 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Docelowo 5, dlatego wolałbym wykluczać niż ręcznie dodawać dla każdego AP oddzielny wpis

Idź do forum: Oprogramowanie / Software

181 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Ok. Są tylko te dwa rozwiązania, czyli albo wiele wpisów tej samej sieci z różnym BSSID albo inna nazwa sieci AP?

Idź do forum: Oprogramowanie / Software

182 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Router znajduje się w pobliżu swojego Access Pointa o nazwie "NAZWA" (2.4GHz, kanał 4).
Router ten ma dwie fizycznie różne karty WiFi, działają na różnych kanałach 2.4GHz...


- na pierwszym radio ustawiam kartę WiFi w trybie AP, czyli rozgłaszam sieć WiFi:

# 12 kanał
config wifi-iface 'wlan_1'
        option device 'radio0'
        option ifname 'wlan0-1'
        option network 'lan'
        option mode 'ap'
        option ssid 'NAWA'
        option key 'HASŁO'
        option encryption 'psk-mixed+tkip+ccmp'


- na drugiem radio ustawiam kartę WiFi w trybie STA, czyli do łączenia się z obcą siecią:

# kanał auto
config wifi-iface 'wwan_1'
        option device 'radio1'
        option ifname 'wwan0'
        option network 'HotSPOT'
        option mode 'sta'
        option ssid 'NAWA'
        option key 'HASŁO'
        option encryption 'psk-mixed+tkip+ccmp'


Oczywiście, w takiej sytuacji karta druga łączy się do karty pierwszej - bez sensu, więc do konfiguracji karty pierwszej dodaje:

# 12 kanał
config wifi-iface 'wlan_1'
        option device 'radio0'
        option ifname 'wlan0-1'
        option network 'lan'
        option mode 'ap'
        option ssid 'NAWA'
        option key 'HASŁO'
        option encryption 'psk-mixed+tkip+ccmp'
        option macfilter 'deny'
        list maclist 'TUTAJ MAC ADDRESS DRUGIEJ KARTY'

W takiej sytuacji druga karta łączy się do pierwszej karty, która ją odrzuca - bez sensu.


Można byłoby pokusić się o wprowadzenie BSSID, ale musiałbym podać punkty wszystkich AP, a mi zależy na wykluczeniu jednego punktu zamiast podawaniu wszystkich oprócz tego jednego.

# kanał auto
config wifi-iface 'wwan_1'
        option device 'radio1'
        option ifname 'wwan0'
        option network 'HotSPOT'
        option mode 'sta'
        option ssid 'NAWA'
        option bssid 'TUTAJ MAC ADDRESS KARTY INNEGO ROUTERA'
        option key 'HASŁO'
        option encryption 'psk-mixed+tkip+ccmp'


Na ten moment mógłbym w drugim routerze utworzyć drugą sieć z inną nazwą.

Jakie są jeszcze rozwiązania takiej sytuacji - łączenie się i rozgłaszanie tej samej sieci?

Idź do forum: Oprogramowanie / Software

183 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Płyta zamówiona.

To co znalazłem w kompilatorze odnośnie u7623 to jest to:

./target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch

From 004eb24e939b5b31f828333f37fb5cb2a877d6f2 Mon Sep 17 00:00:00 2001
From: Kristian Evensen <kristian.evensen@gmail.com>
Date: Sun, 17 Jun 2018 14:41:47 +0200
Subject: [PATCH] arm: dts: Add Unielec U7623 DTS

---
 arch/arm/boot/dts/Makefile                         |   1 +
 .../dts/mt7623a-unielec-u7623-02-emmc-512M.dts     |  18 +
 .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi    | 366 +++++++++++++++++++++
 3 files changed, 385 insertions(+)
 create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts
 create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
     mt6589-aquaris5.dtb \
     mt6592-evb.dtb \
     mt7623a-rfb-emmc.dtb \
+    mt7623a-unielec-u7623-02-emmc-512M.dtb \
     mt7623n-rfb-nand.dtb \
     mt7623n-bananapi-bpi-r2.dtb \
     mt8127-moose.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7623a-unielec-u7623-02-emmc.dtsi"
+
+/ {
+    model = "UniElec U7623-02 eMMC (512M RAM)";
+    compatible = "unielec,u7623-02-emmc-512m", "unielec,u7623-02-emmc", "mediatek,mt7623";
+
+    memory@80000000 {
+        device_type = "memory";
+        reg = <0 0x80000000 0 0x20000000>;
+    };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
@@ -0,0 +1,366 @@
+/*
+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+    compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
+
+    aliases {
+        serial2 = &uart2;
+    };
+
+    chosen {
+        bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs console=ttyS0,115200 blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)";
+        stdout-path = "serial2:115200n8";
+    };
+
+    cpus {
+        cpu@0 {
+            proc-supply = <&mt6323_vproc_reg>;
+        };
+
+        cpu@1 {
+            proc-supply = <&mt6323_vproc_reg>;
+        };
+
+        cpu@2 {
+            proc-supply = <&mt6323_vproc_reg>;
+        };
+
+        cpu@3 {
+            proc-supply = <&mt6323_vproc_reg>;
+        };
+    };
+
+    reg_1p8v: regulator-1p8v {
+        compatible = "regulator-fixed";
+        regulator-name = "fixed-1.8V";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
+    reg_3p3v: regulator-3p3v {
+        compatible = "regulator-fixed";
+        regulator-name = "fixed-3.3V";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
+    reg_5v: regulator-5v {
+        compatible = "regulator-fixed";
+        regulator-name = "fixed-5V";
+        regulator-min-microvolt = <5000000>;
+        regulator-max-microvolt = <5000000>;
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
+    gpio-keys {
+        compatible = "gpio-keys";
+        pinctrl-names = "default";
+        pinctrl-0 = <&key_pins_a>;
+
+        factory {
+            label = "factory";
+            linux,code = <KEY_RESTART>;
+            gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+    leds {
+        compatible = "gpio-leds";
+        pinctrl-names = "default";
+        pinctrl-0 = <&led_pins_unielec>;
+
+        led3 {
+            label = "u7623-01:green:led3";
+            gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+            default-state = "off";
+        };
+
+        led4 {
+            label = "u7623-01:green:led4";
+            gpios = <&pio 15 GPIO_ACTIVE_LOW>;
+            default-state = "off";
+        };
+    };
+
+    mt7530: switch@0 {
+        compatible = "mediatek,mt7530";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+};
+
+&crypto {
+    status = "okay";
+};
+
+&eth {
+    status = "okay";
+
+    gmac0: mac@0 {
+        compatible = "mediatek,eth-mac";
+        reg = <0>;
+        phy-mode = "trgmii";
+
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+            pause;
+        };
+    };
+
+    mdio: mdio-bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy5: ethernet-phy@5 {
+            reg = <5>;
+            phy-mode = "rgmii-rxid";
+        };
+    };
+};
+
+&mt7530 {
+    compatible = "mediatek,mt7530";
+    #address-cells = <1>;
+    #size-cells = <0>;
+    reg = <0>;
+    pinctrl-names = "default";
+    mediatek,mcm;
+    resets = <&ethsys 2>;
+    reset-names = "mcm";
+    core-supply = <&mt6323_vpa_reg>;
+    io-supply = <&mt6323_vemc3v3_reg>;
+
+    dsa,mii-bus = <&mdio>;
+
+    ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+
+        port@0 {
+            reg = <0>;
+            label = "lan0";
+            cpu = <&cpu_port0>;
+        };
+
+        port@1 {
+            reg = <1>;
+            label = "lan1";
+            cpu = <&cpu_port0>;
+        };
+
+        port@2 {
+            reg = <2>;
+            label = "lan2";
+            cpu = <&cpu_port0>;
+        };
+
+        port@3 {
+            reg = <3>;
+            label = "lan3";
+            cpu = <&cpu_port0>;
+        };
+
+        port@4 {
+            reg = <4>;
+            label = "wan";
+            cpu = <&cpu_port0>;
+        };
+
+        cpu_port0: port@6 {
+            reg = <6>;
+            label = "cpu";
+            ethernet = <&gmac0>;
+            phy-mode = "trgmii";
+
+            fixed-link {
+                speed = <1000>;
+                full-duplex;
+            };
+        };
+    };
+};
+
+&mmc0 {
+    pinctrl-names = "default", "state_uhs";
+    pinctrl-0 = <&mmc0_pins_default>;
+    pinctrl-1 = <&mmc0_pins_uhs>;
+    status = "okay";
+    bus-width = <8>;
+    max-frequency = <50000000>;
+    cap-mmc-highspeed;
+    vmmc-supply = <&reg_3p3v>;
+    vqmmc-supply = <&reg_1p8v>;
+    non-removable;
+};
+
+&pio {
+    key_pins_a: keys-alt {
+        pins-keys {
+            pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+                 <MT7623_PIN_257_GPIO257_FUNC_GPIO257>;
+            input-enable;
+        };
+    };
+
+    led_pins_unielec: leds-unielec {
+        pins-leds {
+            pinmux = <MT7623_PIN_14_GPIO14_FUNC_GPIO14>,
+                 <MT7623_PIN_15_GPIO15_FUNC_GPIO15>;
+        };
+    };
+
+    mmc0_pins_default: mmc0default {
+        pins_cmd_dat {
+            pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+                 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+                 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+                 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+                 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+                 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+                 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+                 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+                 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+            input-enable;
+            bias-pull-up;
+        };
+
+        pins_clk {
+            pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+            bias-pull-down;
+        };
+
+        pins_rst {
+            pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+            bias-pull-up;
+        };
+    };
+
+    mmc0_pins_uhs: mmc0 {
+        pins_cmd_dat {
+            pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+                 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+                 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+                 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+                 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+                 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+                 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+                 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+                 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+            input-enable;
+            drive-strength = <MTK_DRIVE_2mA>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+        };
+
+        pins_clk {
+            pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+            drive-strength = <MTK_DRIVE_2mA>;
+            bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+        };
+
+        pins_rst {
+            pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+            bias-pull-up;
+        };
+    };
+
+    pwm_pins_a: pwm@0 {
+        pins_pwm {
+            pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+                 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+                 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+                 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+                 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+        };
+    };
+
+    uart2_pins_b: uart@2 {
+        pins_dat {
+            pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+                 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+        };
+    };
+
+    pcie_default: pcie_pin_default {
+        pins_cmd_dat {
+            pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+                 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+            bias-disable;
+        };
+    };
+};
+
+&pwm {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pwm_pins_a>;
+    status = "okay";
+};
+
+&pwrap {
+    mt6323 {
+        mt6323led: led {
+            compatible = "mediatek,mt6323-led";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                label = "led0";
+                default-state = "off";
+            };
+        };
+    };
+};
+
+&uart2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart2_pins_b>;
+    status = "okay";
+};
+
+&usb1 {
+    vusb33-supply = <&reg_3p3v>;
+    vbus-supply = <&reg_3p3v>;
+    status = "okay";
+};
+
+&u3phy1 {
+    status = "okay";
+};
+
+&u3phy2 {
+    status = "okay";
+    mediatek,phy-switch = <&hifsys>;
+};
+
+&pcie {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pcie_default>;
+    status = "okay";
+
+    pcie@1,0 {
+        status = "okay";
+    };
+
+    pcie@2,0 {
+        status = "okay";
+    };
+};
+
+&pcie1_phy {
+    status = "okay";
+};
+

./target/linux/mediatek/patches-4.14/0168-mmc-dt-bindings-add-mmc-support-to-MT7623-SoC.patch

From bb37b1aa5d1aadfcecd9189a653856099fbed507 Mon Sep 17 00:00:00 2001
From: Sean Wang <sean.wang@mediatek.com>
Date: Thu, 7 Dec 2017 14:43:22 +0800
Subject: [PATCH 168/224] mmc: dt-bindings: add mmc support to MT7623 SoC

Add the devicetree binding for MT7623 SoC using MT2701 as the fallback.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 ++
 1 file changed, 2 insertions(+)

--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -12,6 +12,8 @@ Required properties:
     "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
     "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
     "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+    "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
+
 - reg: physical base address of the controller and length
 - interrupts: Should contain MSDC interrupt number
 - clocks: Should contain phandle for the clock feeding the MMC controller

./target/linux/mediatek/patches-4.14/0225-arm-dts-Add-missing-mt7623-pcie-nodes.patch

From d31800ff6ed81f44488b590fe372e7b6572d2896 Mon Sep 17 00:00:00 2001
From: Kristian Evensen <kristian.evensen@gmail.com>
Date: Sun, 17 Jun 2018 14:18:45 +0200
Subject: [PATCH] arm: dts: Add missing mt7623 pcie nodes

---
 arch/arm/boot/dts/mt7623.dtsi | 105 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -674,6 +674,111 @@
         #reset-cells = <1>;
     };
 
+    pcie: pcie@1a140000 {
+        compatible = "mediatek,mt7623-pcie";
+        device_type = "pci";
+        reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+              <0 0x1a142000 0 0x1000>, /* Port0 registers */
+              <0 0x1a143000 0 0x1000>, /* Port1 registers */
+              <0 0x1a144000 0 0x1000>; /* Port2 registers */
+        reg-names = "subsys", "port0", "port1", "port2";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0xf800 0 0 0>;
+        interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+                <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+                <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+             <&hifsys CLK_HIFSYS_PCIE0>,
+             <&hifsys CLK_HIFSYS_PCIE1>,
+             <&hifsys CLK_HIFSYS_PCIE2>;
+        clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+        resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+             <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+             <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+        reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+        phys = <&pcie0_port PHY_TYPE_PCIE>,
+               <&pcie1_port PHY_TYPE_PCIE>,
+               <&u3port1 PHY_TYPE_PCIE>;
+        phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+        bus-range = <0x00 0xff>;
+        status = "disabled";
+        ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
+              0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
+
+        pcie@0,0 {
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+            ranges;
+            num-lanes = <1>;
+            status = "disabled";
+        };
+        pcie@1,0 {
+            reg = <0x0800 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+            ranges;
+            num-lanes = <1>;
+            status = "disabled";
+        };
+
+        pcie@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+            ranges;
+            num-lanes = <1>;
+            status = "disabled";
+        };
+    };
+
+    pcie0_phy: pcie-phy@1a149000 {
+        compatible = "mediatek,generic-tphy-v1";
+        reg = <0 0x1a149000 0 0x0700>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+        status = "disabled";
+
+        pcie0_port: pcie-phy@1a149900 {
+            reg = <0 0x1a149900 0 0x0700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+            status = "okay";
+        };
+    };
+
+    pcie1_phy: pcie-phy@1a14a000 {
+        compatible = "mediatek,generic-tphy-v1";
+        reg = <0 0x1a14a000 0 0x0700>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+        status = "disabled";
+
+        pcie1_port: pcie-phy@1a14a900 {
+            reg = <0 0x1a14a900 0 0x0700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+            status = "okay";
+        };
+    };
+
+
     usb1: usb@1a1c0000 {
         compatible = "mediatek,mt7623-xhci",
                  "mediatek,mt8173-xhci";

Nie kumam, czemu u7621 jest w katalogu ./target/linux/ramips
u7623 jest w katalogu ./target/linux/mediatek
A patch do u7623 jest dla katalogu ./target/arch/ - nie mam takiego katalogu w kompilatorze

Idź do forum: Oprogramowanie / Software

184 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Ciężko byłoby zrobić tak, aby uboot był na flash, a cała reszta na eMMC? Czułbym się bezpieczniejszy, zwłaszcza po przetestowaniu tftpd.

Idź do forum: Oprogramowanie / Software

185 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Tak, tak i jest też podobno jakiś soft od MediaTek, gdzie możesz ogrywać eMMC przez USB bez wylutowywania.
Czyli wszystkie partycje są tworzone na eMMC, tak - nic nie ma na Flash?

Idź do forum: Oprogramowanie / Software

186 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary napisał/a:

System masz w emmc

Wszystko siedzi w eMMC? Nawet bootloader?
Kurcze, te eMMC to chyba układ BGA, trochę się obawiam...
Nie mam do tego programatora, nie mam sitka, nigdy tego nie robiłem

Idź do forum: Oprogramowanie / Software

187 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Nie. Ja mam nadzieję, że damy radę smile

Idź do forum: Oprogramowanie / Software

188 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Zgadza się, ja ją będę miał. Ogarniemy to?

Idź do forum: Oprogramowanie / Software

189 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

A nie pomożesz?

Idź do forum: Oprogramowanie / Software

190 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Mam nadzieję, że damy radę. Mam dokumentację od płyty i wiem co gdzie jest - niestety, dokumentacja jest zrobiona jako zdjęcie w PDF-ie i wszystkiego trzeba szukać. Dlaczego ta łatka nie została wprowadzona oficjalnie?
https://www37.zippyshare.com/v/ygag6xBi/file.html

Idź do forum: Oprogramowanie / Software

191 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Wprowadzę tą łatkę i zobaczę.


W u7621-06 gniazdo J1 - mam rozpiskę:

https://images92.fotosik.pl/435/8c009d291b051facgen.jpg



W u7623-06...

- na gnieździe J1 nie znajdę chyba nic ciekawego

https://images91.fotosik.pl/434/900237a25b0b59f0gen.jpg


- na gnieździe J4 jest dużo ciekawiej:

https://images92.fotosik.pl/435/a929fc7d7a9e78c2gen.jpg


i do tego przejściówka:

https://images91.fotosik.pl/434/6ed24e3666b3e206gen.png


W której linijce mogę zamienić te elementy na gpio i w jaki sposób?

Idź do forum: Oprogramowanie / Software

192 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Przepraszam, nie zauważyłem kolejnej podstrony smile

Idź do forum: Oprogramowanie / Software

193 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary, pomożesz?

Idź do forum: Oprogramowanie / Software

194 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Kompiluje sobie system dla u7623-06 - chyba go kupie.

W ./target/linux/mediatek/ nie mam katalogu dts - dlaczego?
W ./target/linux/mediatek/dts/ nie znajduje plików od u7623...

Domyślnie u7623 ma 8MB flash i 8GB eMMC - które partycję po zainstalowaniu znajdą się na flash, a które na emmc - gdzie znajdę taką informację?

Idź do forum: Oprogramowanie / Software

195 Odpowiedź przez tinware

(15 odpowiedzi, napisanych Oprogramowanie / Software)

Ja również dziękuję.

Zastanawiam się jeszcze nad opcją reaptera. W przykładzie router o którym mowa, na pierwszej karcie WiFi działa w trybie klient i łączy się do sieci o nazwie sieci XYZ, na drugiej swojej karcie WiFi rozgłasza sieć o nazwie XYZ. Moje pytanie: czy nie będzie robiło się sprzężenie zwrotne i router nie będzie łączył się sam ze sobą? Czy jedyną znaną techniką na to w OpenWRT i wogóle jest ustawienie pierwszej karty WiFi działającej w trybie klienta na częstotliwości np. 2.3GHz, a drugiej działającej w trybie AP na częstotliwości np. 2.5GHz?

Idź do forum: Oprogramowanie / Software

196 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Dostałem odpowiedź od producenta płyty w sprawie punktów końcowych, wszystko jasne

The USB PORT of all MT76XX MTK chip have an endpoint limitation. You can try some workaround to avoid this issue as other customers did. I don’t know the details  and you can google the detailes on INTERNET.

Czy to cenna uwaga do umieszczenia na Wiki? Tylko na co się powołać, skoro w datasheet nie znalazłem takiej informacji

Idź do forum: Oprogramowanie / Software

197 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Sprawdzone... Na takim ustawieniu

ralink,group = "i2c", "jtag", "uart2", "uart3", "wdt", "mdio", "rgmii2";

https://images89.fotosik.pl/434/36894d615277edc3gen.png

Pin 13 to jest GPIO19
LOW - 3.88V
HIGH - 3.3V

Zmierzyłem też co jest na pierwszych czterech pinach: 

1. R129 4.7kΩ do +3V3
2. R125 4.7kΩ do +3V3
3. R124 4.7kΩ do +3V3
4. R140 4.7kΩ do GND

https://www29.zippyshare.com/v/tfi7J7wL/file.html
Co jeszcze wyrzucić?

Idź do forum: Oprogramowanie / Software

198 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Ale fakt jest taki, ze pomyliłem firmware smile

Testowałem na oficjalnym:

ralink,group = "jtag", "uart2", "wdt";

A teraz spróbuję na moim:

ralink,group = "i2c", "jtag", "uart2", "uart3", "wdt", "mdio", "rgmii2";

Idź do forum: Oprogramowanie / Software

199 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Nie, nie. Na wiki opisane jest złącze J10 (30-pin), a ja mówię o złączu J1 (20-pin).
Tego nie ma na wiki, ja chce to zrobić, dołożyć swoją cegiełkę.

Idź do forum: Oprogramowanie / Software

200 Odpowiedź przez tinware

(194 odpowiedzi, napisanych Oprogramowanie / Software)

Ok, wykompiluje. Powiedz mi, skąd masz taką informację że tam jest ethernet, jtag i i2c?

Idź do forum: Oprogramowanie / Software