FAQ o OpenWrt | Sprzedam różne routery | Oddam

2017-06-02 10:45:58

Wersja OpenWrt:

----------------------------------------------------------------
| |
| Gargoyle PL 1.6.2.2 (b70bfc1) |
| OpenWrt Attitude Adjustment 12.09.1 (r42647) |
| Build time: 2014-09-27 10:11 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-WR842N/ND v1 |
| Uptime: 0d, 08:28:02 |
| Load: 0.69 0.50 0.39 |
| Flash: total: 1.4MB, free: 160KB, used: 89% |
| Memory: total: 28.5MB, free: 6.1MB, used: 78% |
| WAN: 192.168.111.2, proto: static |
| LAN: 192.168.1.7 |
| WLAN: mode: ap, ssid: J.K., channel: 1, conn: 3 |
| WLAN: mode: sta, ssid: HUAWEI_E5573s, channel: 1, conn: 1 |
| WLAN: mode: ap, ssid: hotspot.k.j.pl, channel: 1, conn: 0 |
----------------------------------------------------------------

/etc/config/network:

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config interface 'lan'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option dns '192.168.1.2'
option ipaddr '192.168.1.7'
option ifname 'eth0 eth1'

config switch
option name 'eth0'
option reset '1'
option enable_vlan '1'

config switch_vlan
option device 'eth0'
option vlan '1'
option ports '0 1 2 3 4'

config interface 'vpn'
option ifname 'tun0'
option proto 'none'
option defaultroute '0'
option peerdns '0'

config interface 'wan'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.111.2'
option netmask '255.255.255.0'
option gateway '192.168.111.1'
option dns '192.168.1.2'
option peerdns '0'

config interface 'guest'
option proto 'static'
option ipaddr '172.16.0.1'
option netmask '255.240.0.0'

/etc/config/dhcp:

config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
list rebind_domain 'free.aero2.net.pl'
option domain 'FIRMA'

config dhcp 'lan'
option interface 'lan'
option start '10'
option limit '245'
option leasetime '1h'
option ignore '1'

config dhcp 'wan'
option interface 'wan'
option ignore '1'

config dhcp 'guest'
option start '10'
option limit '244'
option leasetime '1h'
option interface 'guest'

/etc/config/firewall:

config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'

config zone
option name 'lan'
list network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'

config zone
option name 'wan'
list network 'wan'
list network 'wan6'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'

config forwarding
option src 'lan'
option dest 'wan'

config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'

config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'DROP'

config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option src_ip 'fe80::/10'
option src_port '547'
option dest_ip 'fe80::/10'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'

config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'

config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'

config include
option path '/etc/firewall.user'
option reload '1'

config include
option type 'script'
option path '/usr/lib/gargoyle_firewall_util/gargoyle_additions.firewall
option family 'IPv4'
option reload '1'

config include 'miniupnpd'
option type 'script'
option path '/usr/share/miniupnpd/firewall.include'
option family 'IPv4'
option reload '1'

config include 'openvpn_include_file'
option path '/etc/openvpn.firewall'
option reload '1'

config zone 'vpn_zone'
option name 'vpn'
option network 'vpn'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
option mtu_fix '1'
option masq '1'

config forwarding 'vpn_lan_forwarding'
option src 'lan'
option dest 'vpn'

config quota 'quota_1'
option combined_limit '64424509440'
option exceeded_up_speed '512'
option exceeded_down_speed '512'
option reset_interval 'month'
option ip '192.168.1.9'
option id '192.168.1.9'
option reset_time '3600'
option enabled '1'

config remote_accept 'ra_443_443'
option local_port '443'
option remote_port '443'
option proto 'tcp'
option zone 'wan'

config dmz 'dmz'
option from 'wan'
option to_ip '192.168.1.2'

config zone
option name 'guest'
list network 'guest]'
option output 'ACCEPT'
option input 'REJECT'
option forward 'REJECT'

config forwarding
option src 'guest'
option dest 'wan'

/etc/config/wireless:

config wifi-device 'radio0'
option type 'mac80211'
option path 'pci0000:00/0000:00:00.0'
list ht_capab 'SHORT-GI-20'
list ht_capab 'SHORT-GI-40'
list ht_capab 'TX-STBC'
list ht_capab 'RX-STBC1'
list ht_capab 'DSSS_CCK-40'
option noscan '1'
option hwmode '11ng'
option htmode 'HT40+'
option channel '1'

config wifi-iface 'ap_g'
option device 'radio0'
option mode 'ap'
option network 'lan'
option disassoc_low_ack '0'
option ssid 'J.K.'
option encryption 'psk2'
option key 'Tu jest hasło do sieci WiFi'

config wifi-iface 'stacfg'
option device 'radio0'
option mode 'sta'
option network 'wan'
option key 'Tu jest hasło do routera z PLAY On-line'
option ssid 'HUAWEI_E5573s'
option encryption 'psk2'

config wifi-iface 'guest'
option device 'radio0'
option mode 'ap'
option network 'guest'
option ssid 'hotspot.k.j.pl'
option encryption 'none'
option macaddr '00:01:23:45:44:49'
option isolate '1'

Bardzo proszę o pomoc, gdzie jest błac że nie działa w sieci "hotspot.k.j.pl" internet? Sam router widzę.
Zaznaczam że WAN też pobiera Internet z WiFi jako klient.

2017-06-01 21:46:24

Ok, to teraz 2 router i inna sieć.

Tu mam przypadek że już jest WAN ale łączy się z Internetem przez WiFi (AP + Klient) i też utworzyłem tu sieć gościnną ale nie podaje internetu.

Czy to da się chociaż ogarnąć?

2017-06-01 20:43:49

Witam,

Chcąc uruchomić sieć dla gości zastosowałem się do poradnika https://eko.one.pl/?p=openwrt-guestnetwork
wszystko ok, widzę nowa sieć WiFi na 5GHz (radio1) tylko po podłączeniu się nie ma w tej sieci internetu.

Router nie ma WANu, jest zwykłym AP który łączy LAN z WiFi 5GHz (2,4 GHz jest wyłączone - radio0), ma wyłączone DHCP na LAN itd ... jak to zrobić?

2016-03-21 16:54:12

Ok, faktycznie działa. Dzięki za pomoc.

Kamera Venus USB2.0 Camera VID/PID: 0ac8:3420 działa na rozdzielczości 640x480 w 100% poprawnie.

2016-03-21 16:10:11

Ok, inna kamera

Venus USB2.0 Camera VID/PID: 0ac8:3420

root@SERWIS:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0ac8 ProdID=3420 Rev= 1.00
S: Manufacturer=Vimicro Corp.
S: Product=Venus USB2.0 Camera
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=128mA
A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
A: FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS= 128 Ivl=125us
I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS= 512 Ivl=125us
I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS=1024 Ivl=125us
I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS=1536 Ivl=125us
I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS=2048 Ivl=125us
I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS=2688 Ivl=125us
I: If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E: Ad=82(I) Atr=05(Isoc) MxPS=3072 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I: If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 98 Ivl=1ms

Jakiego pakietu brakuje by router zobaczył ją?

2016-03-21 14:52:21

Jaką kamerę niedrogą kupić, by działało na 100% ok?

2016-03-21 14:50:27

Sprecyzuję ...

ustawienia

2016-03-21 14:44:22

root@SERWIS:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 2/800 us ( 0%), #Int= 0, #Iso= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0553 ProdID=0002 Rev= 1.60
S: Manufacturer=VLSI Vision Ltd.
S: Product=USB Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia1
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia1
E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia1
E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl=1ms
I:* If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia1
E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms

root@SERWIS:~# opkg list_installed | grep kmod
kmod-ath - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ath9k - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ath9k-common - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-cfg80211 - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-aes - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-arc4 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ebtables - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-exportfs - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-ext4 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-hfsplus - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-msdos - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfs - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfs-common - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfsd - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-vfat - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fuse - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-gpio-button-hotplug - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-gre - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-i2c-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-input-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-bandwidth - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-conntrack - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-conntrack-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-filter - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-imq - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-ipopt - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-iprange - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-ipset - 3.3.8+6.11-2-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nat - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nat-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nathelper - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nathelper-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-timerange - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-webmon - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-weburl - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipv6 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-leds-gpio - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-default-on - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-netdev - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-timer - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-usbdev - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-crc-ccitt - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-crc16 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-textsearch - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-mac80211 - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nfnetlink - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-base - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp1250 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp1251 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp437 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp775 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp850 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp852 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp866 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-1 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-13 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-15 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-koi8r - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-utf8 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ppp - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pppoe - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pppox - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pptp - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-sched - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-sched-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-scsi-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-tun - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-acm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-cdc-ether - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-cdc-ncm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-qmi-wwan - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-rndis - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-printer - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-option - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-qualcomm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-sierrawireless - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-wwan - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-sierrawireless-directip - 3.3.8-10-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-storage - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-storage-extras - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-wdm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-cpia1 - 3.3.8-1
kmod-video-gspca-ov534 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-stv06xx - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-zc3xx - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-uvc - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-videobuf2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-wdt-ath79 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844

Kamerę widzę, udało mi się nawet ją uruchomić (zaświeciła diodą) ale nie podaje poprawnie obrazu.

2016-03-21 14:36:11

root@SERWIS:~# opkg install kmod-video-gspca-cpia1
ERROR: No package named kmod-video-gspca-cpia1 found, try updating your package lists

root@SERWIS:~# opkg update
Downloading package list for attitude_adjustment source...
Package list for attitude_adjustment downloaded successfully.

Downloading package list for eko1 source...
Package list for eko1 downloaded successfully.

Downloading package list for gargoylepl_plugins source...
Package list for gargoylepl_plugins downloaded successfully.

Downloading package list for gargoylepl_packages source...
Package list for gargoylepl_packages downloaded successfully.

root@SERWIS:~# opkg install kmod-video-gspca-cpia1
Preparing to install the following packages, which will require 6182 bytes:
kmod-video-gspca-cpia1

Preparing to install package kmod-video-gspca-cpia1...
Downloading...
Downloaded kmod-video-gspca-cpia1 successfully.
Installing kmod-video-gspca-cpia1...
Successfully installed kmod-video-gspca-cpia1.
Installation of packages successful.

Gotowe, dalej nie widzę kamery...

2016-03-21 14:31:49

root@SERWIS:~# opkg install kmod-video-gspca-cpia1
ERROR: No package named kmod-video-gspca-cpia1 found, try updating your package lists

Co z tym zrobić?

2016-03-21 14:08:42

root@SERWIS:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0553 ProdID=0002 Rev= 1.60
S: Manufacturer=VLSI Vision Ltd.
S: Product=USB Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms

root@SERWIS:~# opkg list_installed | grep kmod
kmod-ath - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ath9k - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ath9k-common - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-cfg80211 - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-aes - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-arc4 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-crypto-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ebtables - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-exportfs - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-ext4 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-hfsplus - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-msdos - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfs - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfs-common - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-nfsd - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fs-vfat - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-fuse - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-gpio-button-hotplug - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-gre - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-i2c-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-input-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-bandwidth - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-conntrack - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-conntrack-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-filter - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-imq - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-ipopt - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-iprange - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-ipset - 3.3.8+6.11-2-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nat - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nat-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nathelper - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-nathelper-extra - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-timerange - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-webmon - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipt-weburl - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ipv6 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-leds-gpio - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-default-on - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-netdev - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-timer - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ledtrig-usbdev - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-crc-ccitt - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-crc16 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-lib-textsearch - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-mac80211 - 3.3.8+2014-05-22-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nfnetlink - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-base - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp1250 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp1251 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp437 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp775 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp850 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp852 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-cp866 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-1 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-13 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-15 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-iso8859-2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-koi8r - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-nls-utf8 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-ppp - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pppoe - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pppox - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-pptp - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-sched - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-sched-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-scsi-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-tun - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-acm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-cdc-ether - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-cdc-ncm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-qmi-wwan - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-net-rndis - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-printer - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-option - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-qualcomm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-sierrawireless - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-serial-wwan - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-sierrawireless-directip - 3.3.8-10-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-storage - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-storage-extras - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb-wdm - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-usb2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-core - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-ov534 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-stv06xx - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-gspca-zc3xx - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-uvc - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-video-videobuf2 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844
kmod-wdt-ath79 - 3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844

2016-03-21 13:09:40

Ale ja mam już to zainstalowane, tylko nie widzi mi kamery

2016-03-21 13:02:27

----------------------------------------------------------------
| |
| Gargoyle PL 1.6.2.2 (b70bfc1) |
| OpenWrt Attitude Adjustment 12.09.1 (r42647) |
| Build time: 2014-09-27 10:11 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-WR842N/ND v1 |
| Uptime: 0d, 00:13:21 |
| Load: 0.08 0.05 0.06 |
| Flash: total: 1.4MB, free: 792KB, used: 46% |
| Memory: total: 28.5MB, free: 13.5MB, used: 52% |
| WAN: 192.168.2.254, proto: dhcp |
| LAN: 192.168.1.8 |
| WLAN: mode: sta, ssid: WARSZAWSKA_58, channel: 9, conn: 1 |
----------------------------------------------------------------
root@SERWIS:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0553 ProdID=0002 Rev= 1.60
S: Manufacturer=VLSI Vision Ltd.
S: Product=USB Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms

Jak uruchomić tę kamerkę?

2016-01-28 13:51:27

Witam,

Posiadam kamerę Trust, po otwarciu na chpie pisze "VISION STV0673 /MA X3223-A BN4478.1 0013T". Zainstalowałem więc sterownik "kmod-video-gspca-stv06xx". Niestety w programie "Webcam" nadal pisze "Nie wykryto żadnej kamery USB".

Co mogę zrobić by kamera została wykryta?

Z góry dzięki za pomoc

2016-01-28 09:02:15

Ok,

Tylko to przekracza moje potrzeby. Wystarczą 2 linie i to bez pilota.

To jedyna opcja?

2016-01-27 22:57:42

Witam,

Czy mogę prosić o link do np. Allegro gdzie znajdę przekaźnik USB kompatybilny z tym projektem?

Z góry dzięki

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 6 z 6)

Znalezione posty: 126 do 141 z 141

126 Odpowiedź przez mjab 2017-06-02 10:45:58

Odp: OpenWrt 1.6.2.2 i sieć WiFi dla gości ... brak NATu (7 odpowiedzi, napisanych Oprogramowanie / Software)

127 Odpowiedź przez mjab 2017-06-01 21:46:24

Odp: OpenWrt 1.6.2.2 i sieć WiFi dla gości ... brak NATu (7 odpowiedzi, napisanych Oprogramowanie / Software)

128 Temat przez mjab 2017-06-01 20:43:49

Temat: OpenWrt 1.6.2.2 i sieć WiFi dla gości ... brak NATu (7 odpowiedzi, napisanych Oprogramowanie / Software)

129 Odpowiedź przez mjab 2016-03-21 16:54:12

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

130 Odpowiedź przez mjab 2016-03-21 16:10:11

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

131 Odpowiedź przez mjab 2016-03-21 14:52:21

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

132 Odpowiedź przez mjab 2016-03-21 14:50:27

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

133 Odpowiedź przez mjab 2016-03-21 14:44:22

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

134 Odpowiedź przez mjab 2016-03-21 14:36:11

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

135 Odpowiedź przez mjab 2016-03-21 14:31:49

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

136 Odpowiedź przez mjab 2016-03-21 14:08:42

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

137 Odpowiedź przez mjab 2016-03-21 13:09:40

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

138 Odpowiedź przez mjab 2016-03-21 13:02:27

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

139 Odpowiedź przez mjab 2016-01-28 13:51:27

Odp: Plugin Webcam do Gagroyle (268 odpowiedzi, napisanych Oprogramowanie / Software)

140 Odpowiedź przez mjab 2016-01-28 09:02:15

Odp: USB Relay - plugin do Gargoyle (572 odpowiedzi, napisanych Oprogramowanie / Software)

141 Odpowiedź przez mjab 2016-01-27 22:57:42

Odp: USB Relay - plugin do Gargoyle (572 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 126 do 141 z 141