76

(10 odpowiedzi, napisanych Oprogramowanie / Software)

/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)




Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.000000] Linux version 4.4.71 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Thu Jun 8 21:02:37 2017
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000] MyLoader: sysp=da9b600e, boardp=7dffb490, parts=cfe98008
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Jul  6 19:59:08 2017 kern.warn kernel: [    0.000000] No valid device tree found, continuing without
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Zone ranges:
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Early memory node ranges
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804304d0, node_mem_map 81000000
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Thu Jul  6 19:59:08 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Jul  6 19:59:08 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR1043ND-v2  console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Memory: 59968K/65536K available (3098K kernel code, 162K rwdata, 772K rodata, 312K init, 205K bss, 5568K reserved, 0K cma-reserved)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.008290] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.071187] pid_max: default: 32768 minimum: 301
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.076199] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.083238] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.092886] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.103402] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.110979] NET: Registered protocol family 16
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.116995] MIPS: machine is TP-LINK TL-WR1043ND v2
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.564969] clocksource: Switched to clocksource MIPS
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.571558] NET: Registered protocol family 2
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.576970] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.584395] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.591206] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.598060] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.604282] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.611225] NET: Registered protocol family 1
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    0.615942] PCI: CLS 0 bytes, default 32
Thu Jul  6 19:59:08 2017 kern.warn kernel: [    0.619683] Crashlog allocated RAM at address 0x3f00000
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.637978] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.644192] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.656862] io scheduler noop registered
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.661040] io scheduler deadline registered (default)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.666753] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.675921] console [ttyS0] disabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.699799] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.708985] console [ttyS0] enabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.716408] bootconsole [early0] disabled
Thu Jul  6 19:59:08 2017 kern.warn kernel: [    0.729284] m25p80 spi0.0: found gd25q64, expected m25p80
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.734771] m25p80 spi0.0: gd25q64 (8192 Kbytes)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.740672] 5 tp-link partitions found on MTD device spi0.0
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.746365] Creating 5 MTD partitions on "spi0.0":
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.751227] 0x000000000000-0x000000020000 : "u-boot"
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.757461] 0x000000020000-0x00000016ba54 : "kernel"
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.763870] 0x00000016ba54-0x0000007f0000 : "rootfs"
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.770309] mtd: device 2 (rootfs) set to be root filesystem
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.776159] 1 squashfs-split partitions found on MTD device rootfs
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.782434] 0x000000630000-0x0000007f0000 : "rootfs_data"
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.789316] 0x0000007f0000-0x000000800000 : "art"
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    0.795531] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jul  6 19:59:08 2017 kern.info kernel: [    0.811976] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
Thu Jul  6 19:59:08 2017 kern.info kernel: [    1.444012] libphy: ag71xx_mdio: probed
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.036477] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.047831] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.636581] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.644600] NET: Registered protocol family 10
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.652649] NET: Registered protocol family 17
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.657277] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.670193] 8021q: 802.1Q VLAN Support v1.8
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.683399] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Jul  6 19:59:08 2017 kern.info kernel: [    2.692282] Freeing unused kernel memory: 312K (80452000 - 804a0000)
Thu Jul  6 19:59:08 2017 user.info kernel: [    3.867780] init: Console is alive
Thu Jul  6 19:59:08 2017 user.info kernel: [    3.871415] init: - watchdog -
Thu Jul  6 19:59:08 2017 user.info kernel: [    5.581915] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.695533] usbcore: registered new interface driver usbfs
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.701202] usbcore: registered new interface driver hub
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.706708] usbcore: registered new device driver usb
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    5.748015] SCSI subsystem initialized
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.757483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.765647] ehci-platform: EHCI generic platform driver
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.771029] ehci-platform ehci-platform.0: EHCI Host Controller
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.777106] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.787396] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.793503] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.815006] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.822304] hub 1-0:1.0: USB hub found
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.826425] hub 1-0:1.0: 1 port detected
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.830731] ehci-platform ehci-platform.1: EHCI Host Controller
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.836814] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.847130] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.853238] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.874991] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.882282] hub 2-0:1.0: USB hub found
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.886412] hub 2-0:1.0: 1 port detected
Thu Jul  6 19:59:08 2017 kern.info kernel: [    5.894291] usbcore: registered new interface driver usb-storage
Thu Jul  6 19:59:08 2017 user.info kernel: [    5.901049] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jul  6 19:59:08 2017 user.info kernel: [    5.918784] init: - preinit -
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.302824] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.511471] eth1: link up (1000Mbps/Full duplex)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    6.519356] random: procd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.528893] hub 1-1:1.0: USB hub found
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.535313] hub 1-1:1.0: 4 ports detected
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.824988] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.959577] usb-storage 1-1.4:1.0: USB Mass Storage device detected
Thu Jul  6 19:59:08 2017 kern.info kernel: [    6.966662] scsi host0: usb-storage 1-1.4:1.0
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    7.967417] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    7.978107] sd 0:0:0:0: [sda] 15248832 512-byte logical blocks: (7.81 GB/7.27 GiB)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    7.986338] sd 0:0:0:0: [sda] Write Protect is off
Thu Jul  6 19:59:08 2017 kern.debug kernel: [    7.991209] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Thu Jul  6 19:59:08 2017 kern.err kernel: [    7.991705] sd 0:0:0:0: [sda] No Caching mode page found
Thu Jul  6 19:59:08 2017 kern.err kernel: [    7.997139] sd 0:0:0:0: [sda] Assuming drive cache: write through
Thu Jul  6 19:59:08 2017 kern.info kernel: [    8.008354]  sda: sda1
Thu Jul  6 19:59:08 2017 kern.notice kernel: [    8.013836] sd 0:0:0:0: [sda] Attached SCSI removable disk
Thu Jul  6 19:59:08 2017 user.info kernel: [    9.779470] mount_root: loading kmods from internal overlay
Thu Jul  6 19:59:08 2017 user.info kernel: [    9.819783] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Jul  6 19:59:08 2017 user.info kernel: [    9.828180] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   10.192954] jffs2: notice: (456) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jul  6 19:59:08 2017 user.info kernel: [   10.209085] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jul  6 19:59:08 2017 kern.info kernel: [   10.539041] EXT4-fs (sda1): recovery complete
Thu Jul  6 19:59:08 2017 kern.info kernel: [   10.545721] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Thu Jul  6 19:59:08 2017 user.err kernel: [   10.557590] block: extroot: UUID mismatch (root: 440ecd6c-7ba09b0c-b7868cd7-3a7f3eda, overlay: 038ca0c4-a08b133e-008cef8f-63547621)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   10.657363] jffs2: notice: (453) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jul  6 19:59:08 2017 user.info kernel: [   11.245762] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jul  6 19:59:08 2017 kern.info kernel: [   12.498860] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Thu Jul  6 19:59:08 2017 user.err kernel: [   12.515840] block: extroot: UUID mismatch (root: 440ecd6c-7ba09b0c-b7868cd7-3a7f3eda, overlay: 038ca0c4-a08b133e-008cef8f-63547621)
Thu Jul  6 19:59:08 2017 user.info kernel: [   12.572443] mount_root: switching to jffs2 overlay
Thu Jul  6 19:59:08 2017 user.warn kernel: [   12.585597] urandom-seed: Seeding with /etc/urandom.seed
Thu Jul  6 19:59:08 2017 kern.info kernel: [   12.728337] eth1: link down
Thu Jul  6 19:59:08 2017 user.info kernel: [   12.740323] procd: - early -
Thu Jul  6 19:59:08 2017 user.info kernel: [   12.743323] procd: - watchdog -
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.226777] random: jshn: uninitialized urandom read (4 bytes read, 71 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.406402] random: jshn: uninitialized urandom read (4 bytes read, 71 bits of entropy available)
Thu Jul  6 19:59:08 2017 user.info kernel: [   13.443306] procd: - ubus -
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.615684] random: jshn: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.629859] random: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.647362] random: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.656771] random: ubus: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.667010] random: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.676493] random: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 kern.notice kernel: [   13.688829] random: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available)
Thu Jul  6 19:59:08 2017 user.info kernel: [   13.698647] procd: - init -
Thu Jul  6 19:59:08 2017 user.info kernel: [   14.822108] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.027745] tun: Universal TUN/TAP device driver, 1.6
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.032872] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.070701] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.120976] u32 classifier
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.123730]     input device check on
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.127494]     Actions configured
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.147070] Mirror/redirect action on
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.162834] nf_conntrack version 0.5.0 (941 buckets, 3764 max)
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.200384] fuse init (API version 7.23)
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.220229] usbcore: registered new interface driver cdc_acm
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.226024] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.246526] usbcore: registered new interface driver cdc_wdm
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.267128] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.275294] Backport generated by backports.git backports-20160324-13-g24da7d3c
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.297731] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.401764] usbcore: registered new interface driver usblp
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.424319] usbcore: registered new interface driver usbserial
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.430391] usbcore: registered new interface driver usbserial_generic
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.437124] usbserial: USB Serial support registered for generic
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.531086] xt_time: kernel timezone is -0000
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.545148] usbcore: registered new interface driver cdc_ether
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.568331] usbcore: registered new interface driver cdc_ncm
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.646492] usbcore: registered new interface driver huawei_cdc_ncm
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.759993] PPP generic driver version 2.4.2
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.776348] NET: Registered protocol family 24
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.787263] usbcore: registered new interface driver qmi_wwan
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.801653] usbcore: registered new interface driver rndis_host
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.827339] usbcore: registered new interface driver sierra
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.833077] usbserial: USB Serial support registered for Sierra USB modem
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.856011] usbcore: registered new interface driver sierra_net
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.937232] usbcore: registered new interface driver cdc_mbim
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.958627] usbcore: registered new interface driver option
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.964357] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Jul  6 19:59:08 2017 kern.info kernel: [   15.998140] usbcore: registered new interface driver qcserial
Thu Jul  6 19:59:08 2017 kern.info kernel: [   16.004057] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045371] ath: EEPROM regdomain: 0x0
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045390] ath: EEPROM indicates default country code should be used
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045398] ath: doing EEPROM country->regdmn map search
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045415] ath: country maps to regdmn code: 0x3a
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045424] ath: Country alpha2 being used: US
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.045432] ath: Regpair used: 0x3a
Thu Jul  6 19:59:08 2017 kern.debug kernel: [   16.062106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Jul  6 19:59:08 2017 kern.info kernel: [   16.067059] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Thu Jul  6 19:59:08 2017 user.info kernel: [   16.125407] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: 8021ad
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: 8021q
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: macvlan
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: bridge
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: Network device
Thu Jul  6 19:59:11 2017 user.notice : Added device handler type: tunnel
Thu Jul  6 19:59:12 2017 daemon.err block: /dev/mtdblock2 is already mounted on /rom
Thu Jul  6 19:59:12 2017 daemon.err block: /dev/mtdblock3 is already mounted on /overlay
Thu Jul  6 19:59:13 2017 kern.notice kernel: [   22.355033] random: nonblocking pool is initialized
Thu Jul  6 19:59:13 2017 authpriv.info dropbear[1142]: Not backgrounding
Thu Jul  6 19:59:17 2017 kern.info kernel: [   26.458980] eth1: link up (1000Mbps/Full duplex)
Thu Jul  6 19:59:17 2017 kern.info kernel: [   26.475473] device eth1 entered promiscuous mode
Thu Jul  6 19:59:17 2017 kern.info kernel: [   26.486069] br-lan: port 1(eth1) entered forwarding state
Thu Jul  6 19:59:17 2017 kern.info kernel: [   26.491580] br-lan: port 1(eth1) entered forwarding state
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Jul  6 19:59:17 2017 kern.info kernel: [   26.675451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'wan' is enabled
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jul  6 19:59:17 2017 daemon.info odhcpd[1095]: Raising SIGUSR1 due to address change on br-lan
Thu Jul  6 19:59:17 2017 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Network device 'eth1' link is up
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Jul  6 19:59:17 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635514] ath: EEPROM regdomain: 0x8268
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635531] ath: EEPROM indicates we should expect a country code
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635543] ath: doing EEPROM country->regdmn map search
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635553] ath: country maps to regdmn code: 0x37
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635563] ath: Country alpha2 being used: PL
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635571] ath: Regpair used: 0x37
Thu Jul  6 19:59:18 2017 kern.debug kernel: [   27.635581] ath: regdomain 0x8268 dynamically updated by user
Thu Jul  6 19:59:18 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jul  6 19:59:18 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 19:59:18 2017 daemon.notice odhcpd[1095]: Failed to send to ff02::1%br-lan (Address not available)
Thu Jul  6 19:59:19 2017 kern.info kernel: [   28.236804] eth0: link up (1000Mbps/Full duplex)
Thu Jul  6 19:59:19 2017 kern.info kernel: [   28.485005] br-lan: port 1(eth1) entered forwarding state
Thu Jul  6 19:59:19 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Jul  6 19:59:19 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Jul  6 19:59:19 2017 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jul  6 19:59:19 2017 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jul  6 19:59:19 2017 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jul  6 19:59:19 2017 kern.info kernel: [   28.825045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jul  6 19:59:20 2017 daemon.notice netifd: wan (1577): udhcpc: started, v1.25.1
Thu Jul  6 19:59:21 2017 daemon.err odhcp6c[1578]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Jul  6 19:59:21 2017 daemon.notice netifd: wan (1577): udhcpc: sending discover
Thu Jul  6 19:59:21 2017 daemon.notice netifd: wan (1577): udhcpc: sending select for 10.8.153.199
Thu Jul  6 19:59:21 2017 daemon.notice netifd: wan (1577): udhcpc: lease of 10.8.153.199 obtained, lease time 86400
Thu Jul  6 19:59:21 2017 daemon.notice netifd: Interface 'wan' is now up
Thu Jul  6 19:59:21 2017 user.notice : setting up led USB
Thu Jul  6 19:59:21 2017 user.notice : setting up led WLAN
Thu Jul  6 19:59:21 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Jul  6 19:59:21 2017 kern.info kernel: [   31.056500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Jul  6 19:59:21 2017 kern.info kernel: [   31.172516] device wlan0 entered promiscuous mode
Thu Jul  6 19:59:21 2017 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Jul  6 19:59:21 2017 daemon.err hostapd: Using interface wlan0 with hwaddr a4:2b:b0:fe:8a:a0 and ssid "dom_WIFI"
Thu Jul  6 19:59:22 2017 daemon.err odhcp6c[1578]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Jul  6 19:59:22 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 19:59:22 2017 daemon.info procd: - init complete -
Thu Jul  6 19:59:22 2017 kern.info kernel: [   32.106011] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Jul  6 19:59:22 2017 kern.info kernel: [   32.112614] br-lan: port 2(wlan0) entered forwarding state
Thu Jul  6 19:59:22 2017 kern.info kernel: [   32.118268] br-lan: port 2(wlan0) entered forwarding state
Thu Jul  6 19:59:22 2017 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Jul  6 19:59:22 2017 daemon.notice hostapd: wlan0: AP-ENABLED
Thu Jul  6 19:59:22 2017 daemon.notice netifd: Network device 'wlan0' link is up
Thu Jul  6 20:00:08 2017 kern.info kernel: [   34.115137] br-lan: port 2(wlan0) entered forwarding state
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: started, version 2.77 cachesize 150
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: DNS service limited to local subnets
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq-dhcp[1819]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: using local addresses only for domain lan
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: reading /tmp/resolv.conf.auto
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: using local addresses only for domain lan
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: using nameserver 91.216.213.2#53
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: using nameserver 8.8.8.8#53
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: read /etc/hosts - 4 addresses
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/odhcpd - 0 addresses
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Thu Jul  6 20:00:09 2017 daemon.info dnsmasq-dhcp[1819]: read /etc/ethers - 0 addresses
Thu Jul  6 20:00:10 2017 user.notice firewall: Reloading firewall due to ifup of wan (eth0)
Thu Jul  6 20:00:11 2017 user.notice ddns-scripts[1944]: myddns_ipv4: PID '1944' started at 2017-07-06 20:00
Thu Jul  6 20:00:11 2017 user.warn ddns-scripts[1944]: myddns_ipv4: Service section disabled! - TERMINATE
Thu Jul  6 20:00:11 2017 user.warn ddns-scripts[1944]: myddns_ipv4: PID '1944' exit WITH ERROR '1' at 2017-07-06 20:00
Thu Jul  6 20:00:13 2017 daemon.info hostapd: wlan0: STA 50:b7:c3:df:d2:97 IEEE 802.11: authenticated
Thu Jul  6 20:00:13 2017 daemon.info hostapd: wlan0: STA 50:b7:c3:df:d2:97 IEEE 802.11: associated (aid 1)
Thu Jul  6 20:00:13 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 50:b7:c3:df:d2:97
Thu Jul  6 20:00:13 2017 daemon.info hostapd: wlan0: STA 50:b7:c3:df:d2:97 WPA: pairwise key handshake completed (RSN)
Thu Jul  6 20:00:13 2017 daemon.info dnsmasq-dhcp[1819]: DHCPREQUEST(br-lan) 192.168.1.109 50:b7:c3:df:d2:97
Thu Jul  6 20:00:13 2017 daemon.info dnsmasq-dhcp[1819]: DHCPACK(br-lan) 192.168.1.109 50:b7:c3:df:d2:97 Imperator
Thu Jul  6 20:00:13 2017 daemon.notice odhcpd[1095]: Got DHCPv6 request
Thu Jul  6 20:00:13 2017 daemon.warn odhcpd[1095]: DHCPV6 SOLICIT IA_NA from 00010001207d4ab52089841627b4 on br-lan: ok fdb7:133c:daa9::421/128
Thu Jul  6 20:00:13 2017 daemon.notice odhcpd[1095]: Got DHCPv6 request
Thu Jul  6 20:00:13 2017 daemon.warn odhcpd[1095]: DHCPV6 SOLICIT IA_NA from 00010001207d4ab52089841627b4 on br-lan: ok fdb7:133c:daa9::421/128
Thu Jul  6 20:00:13 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 20:00:14 2017 daemon.info hostapd: wlan0: STA c4:6e:1f:9f:e4:83 IEEE 802.11: authenticated
Thu Jul  6 20:00:14 2017 daemon.info hostapd: wlan0: STA c4:6e:1f:9f:e4:83 IEEE 802.11: associated (aid 2)
Thu Jul  6 20:00:14 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:14 2017 daemon.info hostapd: wlan0: STA c4:6e:1f:9f:e4:83 WPA: pairwise key handshake completed (RSN)
Thu Jul  6 20:00:14 2017 daemon.notice odhcpd[1095]: Got DHCPv6 request
Thu Jul  6 20:00:14 2017 daemon.warn odhcpd[1095]: DHCPV6 REQUEST IA_NA from 00010001207d4ab52089841627b4 on br-lan: ok fdb7:133c:daa9::421/128
Thu Jul  6 20:00:14 2017 daemon.info dnsmasq[1819]: read /etc/hosts - 4 addresses
Thu Jul  6 20:00:14 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/odhcpd - 1 addresses
Thu Jul  6 20:00:14 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Thu Jul  6 20:00:14 2017 daemon.info dnsmasq-dhcp[1819]: read /etc/ethers - 0 addresses
Thu Jul  6 20:00:15 2017 daemon.info hostapd: wlan0: STA b8:86:87:36:dc:45 IEEE 802.11: authenticated
Thu Jul  6 20:00:15 2017 daemon.info hostapd: wlan0: STA b8:86:87:36:dc:45 IEEE 802.11: associated (aid 3)
Thu Jul  6 20:00:15 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED b8:86:87:36:dc:45
Thu Jul  6 20:00:15 2017 daemon.info hostapd: wlan0: STA b8:86:87:36:dc:45 WPA: pairwise key handshake completed (RSN)
Thu Jul  6 20:00:15 2017 daemon.info dnsmasq-dhcp[1819]: DHCPREQUEST(br-lan) 192.168.1.199 b8:86:87:36:dc:45
Thu Jul  6 20:00:15 2017 daemon.info dnsmasq-dhcp[1819]: DHCPACK(br-lan) 192.168.1.199 b8:86:87:36:dc:45 android-ee3c5c7cd514d2ec
Thu Jul  6 20:00:16 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 20:00:17 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPDISCOVER(br-lan) c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPOFFER(br-lan) 192.168.1.141 c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPDISCOVER(br-lan) c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPOFFER(br-lan) 192.168.1.141 c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPDISCOVER(br-lan) c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPOFFER(br-lan) 192.168.1.141 c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPREQUEST(br-lan) 192.168.1.141 c4:6e:1f:9f:e4:83
Thu Jul  6 20:00:20 2017 daemon.info dnsmasq-dhcp[1819]: DHCPACK(br-lan) 192.168.1.141 c4:6e:1f:9f:e4:83 TL-WA854RE
Thu Jul  6 20:00:21 2017 daemon.info odhcpd[1095]: Using a RA lifetime of 0 seconds on br-lan
Thu Jul  6 20:00:25 2017 authpriv.info dropbear[2053]: Child connection from 192.168.1.109:57842
Thu Jul  6 20:00:30 2017 authpriv.notice dropbear[2053]: Password auth succeeded for 'root' from 192.168.1.109:57842
Thu Jul  6 20:00:40 2017 daemon.info dnsmasq[1819]: read /etc/hosts - 4 addresses
Thu Jul  6 20:00:40 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/odhcpd - 1 addresses
Thu Jul  6 20:00:40 2017 daemon.info dnsmasq[1819]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Thu Jul  6 20:00:40 2017 daemon.info dnsmasq-dhcp[1819]: read /etc/ethers - 0 addresses
Thu Jul  6 20:06:44 2017 authpriv.info dropbear[2053]: Exit (root): Exited normally
Thu Jul  6 20:06:52 2017 authpriv.info dropbear[2278]: Child connection from 192.168.1.109:57868
Thu Jul  6 20:06:54 2017 authpriv.warn dropbear[2278]: Login attempt for nonexistent user from 192.168.1.109:57868
Thu Jul  6 20:06:57 2017 authpriv.warn dropbear[2278]: Login attempt for nonexistent user from 192.168.1.109:57868
Thu Jul  6 20:07:00 2017 authpriv.info dropbear[2278]: Exit before auth: Exited normally
Thu Jul  6 20:07:05 2017 authpriv.info dropbear[2279]: Child connection from 192.168.1.109:57869
Thu Jul  6 20:07:09 2017 authpriv.notice dropbear[2279]: Password auth succeeded for 'root' from 192.168.1.109:57869

77

(10 odpowiedzi, napisanych Oprogramowanie / Software)

https://images82.fotosik.pl/680/f915cb9a5a4c5701med.png

78

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Dobra udało się.Okazało się że był jakiś problem z pendrivem.Podłączyłem inny i działa.
Edit:No i d***. Dalej nie działa.

79

(10 odpowiedzi, napisanych Oprogramowanie / Software)

Hej
Zainstalowałem na TL-WR1043NDv3 LEDE LUCI. Chciałbym podłączyć do niego dysk i zrobić serwer ftp oraz DLNA i zainstalować Transmission. Oczywiście brakuje miejsca na te wszystkie dodatki. Chciałbym użyć 8 GB pendriva jako miejsce do instalacji dodatków. Czy da się to zrobić przez GUI czy trzeba "wklepywać" w terminalu?
Edit: Zrobiłem coś takiego(https://images84.fotosik.pl/679/8d23642a8de1c04dmed.png) ale dalej w Oprogramowanie jest 1,47 MB wolnego.

80

(5 odpowiedzi, napisanych Oprogramowanie / Software)

https://images83.fotosik.pl/667/fcfe0790ae13881emed.png
Tak jest widziany dysk w Gargoyle.Czyli co mam wpisać?

81

(5 odpowiedzi, napisanych Oprogramowanie / Software)

Właśnie z tego korzystałem. Ale dalej nie wiem jak ustawić miejsce pobierania torrentów

Hej
Powróciłem do Gargoyle. Chciałbym zainstalować Transmision. Nie wiem tylko jak skonfigurować tak by torrenty pobierały się na dysk a nie pendrive( który tworzy exroot).

83

(5 odpowiedzi, napisanych Oprogramowanie / Software)

Znalazłem lepszy sposób. Zainstalowałem Gargoyle.

84

(5 odpowiedzi, napisanych Oprogramowanie / Software)

Dalej nie wiem jak to ustawić.
https://images83.fotosik.pl/666/91297e6b7f3b59b2med.png
https://images82.fotosik.pl/668/0c08ad0a063e986amed.png
https://images81.fotosik.pl/667/006c1e942ac71e30med.png
Nie wiem czy to ma znaczenie ale dysk był formatowany tylko pod Windows.

85

(5 odpowiedzi, napisanych Oprogramowanie / Software)

Router to TP-Link TL-WR1043NDv3. Oprogramowanie to LEDE Reboot 17.01-SNAPSHOT r3435-65eec8b / LuCI lede-17.01 branch (git-17.152.82987-7f6fc16)
Wchodzę w System->Punkty montowania klikam Dodaj ale nie wiem co dalej.

86

(5 odpowiedzi, napisanych Oprogramowanie / Software)

Hej
To znowu ja big_smile
Chciałbym podłączyć dysk do routera z LEDE i udostępniać dane na TV, komputer, smartfon. Na oficjalny firmware wszystko było proste, a tu nie. Po podłączeniu dysku nie wiem co dalej. W GUI nie ma sekcji USB.

87

(3 odpowiedzi, napisanych Oprogramowanie / Software)

Patrzyłem na to. A w TL-WR1043NDv3 przycisk WPS jest rozpoznawalny czy nie?

88

(3 odpowiedzi, napisanych Oprogramowanie / Software)

Hej
Czy jest jakiś dodatek do LEDE dzięki któremu będzie można używać przycisku WPS w TP-Link TL-WR1043NDv3?

89

(1 odpowiedzi, napisanych Oprogramowanie / Software)

Hej
Mam zainstalowane LEDE LUCI 17.01. Chciałbym zmienić Bootstrap na Material, ale nie wiem jak to zrobić?

Mam jeszcze takie małe pytanie. Jak zainstalować jakiś inny motyw?

Mam coś takiego. Co dalej?
Wielki dzięki. Jest wreszcie 150 Mb/s big_smile big_smile
Prędkość internetu wreszcie jest jaka powinna.

A da się to zrobić pod Windows np:Putty?
Nie wiem czy to ma znaczenie ale teraz mam zainstalowane LEDE.

Czyli gdzie? Przepraszam że zadaję takie pytania, ale dopiero się uczę obsługi tego systemu.

Wywala błąd przy wprowadzaniu option noscan '1'.
https://images81.fotosik.pl/664/1e575ca3e839384bmed.png

Dzięki.Zaraz sprawdzę.

Witam
Posiadam router jak w temacie. Zainstalowałem na nim LUCI. Okazało się że prędkość w ustawieniach komputera wynosi tylko 72,2 Mb/s. Zmiana kanału i szerokości na 40 Mhz nic nie dała. Zdenerwowany wróciłem do Gargoyle i prędkość wzrosła do 150 Mb/s. Zależy mi na zainstalowaniu LUCI, ale chcę dowiedzieć się dlaczego na LUCI jest niska szybkość, a na Gargoyle wysoka?
https://images83.fotosik.pl/663/f3367c87b74c6849med.png

https://images81.fotosik.pl/664/603e452c7382fcb9med.png