Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez armen10
Tak. Obraz z luci jest za duży dla tego modelu i już nie robi się jffs. Użyj obrazu bez luci.
Usunę te obrazy przy okazji.
Bez Luci ? 
hehe szkoda...
Nie robił ci się jffs? Zrestatuj router i pokaż wyniki
logread
mount
df -h
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.5M 5.5M 0 100% /rom
tmpfs 28.1M 268.0K 27.9M 1% /tmp
tmpfs 28.1M 112.0K 28.0M 0% /tmp/root
overlayfs:/tmp/root 28.1M 112.0K 28.0M 0% /
tmpfs 512.0K 0 512.0K 0% /devroot@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
overlayfs:/tmp/root on / type overlay (rw,noatime,lowerdir=/,upperdir=/tmp/root/upper,workdir=/tmp/root/work)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)root@OpenWrt:~# logread
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.000000] Linux version 5.10.138 (cezary@eko.one.pl) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19162-a036c1d43b) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sat Sep 3 18:56:06 2022
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Board has DDR2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Analog PMU set to hw control
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Digital PMU set to hw control
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] printk: bootconsole [early0] enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-MR3020 v3
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Zone ranges:
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Movable zone start for each node
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Early memory node ranges
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 144 pages used for memmap
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Writing ErrCtl register=0004b37a
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Readback ErrCtl register=0004b37a
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Memory: 56412K/65536K available (5667K kernel code, 618K rwdata, 692K rodata, 1204K init, 210K bss, 9124K reserved, 0K cma-reserved)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] NR_IRQS: 256
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] intc: using register map from devicetree
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] CPU Clock: 580MHz
Sat Sep 3 20:56:19 2022 kern.crit kernel: [ 0.000000] timer_probe: no matching timers found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.007645] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.073573] pid_max: default: 32768 minimum: 301
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.078209] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.085228] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.095146] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.106621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.116140] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.122793] pinctrl core: initialized pinctrl subsystem
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.132886] NET: Registered protocol family 16
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.138038] thermal_sys: Registered thermal governor 'step_wise'
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.202615] clocksource: Switched to clocksource MIPS
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.214663] NET: Registered protocol family 2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.219118] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.227061] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.235222] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.242581] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.249381] TCP: Hash tables configured (established 1024 bind 1024)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.255683] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.261963] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.269068] NET: Registered protocol family 1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.273319] PCI: CLS 0 bytes, default 32
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.284982] workingset: timestamp_bits=14 max_order=14 bucket_order=0
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.296585] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.302165] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.314036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.323824] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.329390] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.335116] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.340734] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.349673] printk: console [ttyS0] disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.353913] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.362647] printk: console [ttyS0] enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.371037] printk: bootconsole [early0] disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.382042] spi-mt7621 10000b00.spi: sys_freq: 193333333
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.407505] spi-nor spi0.0: s25fl064k (8192 Kbytes)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.412527] 4 fixed-partitions partitions found on MTD device spi0.0
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.419110] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.426565] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.434417] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.441856] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.449920] Creating 4 MTD partitions on "spi0.0":
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.454860] 0x000000000000-0x000000020000 : "boot"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.464000] 0x000000020000-0x0000007c0000 : "firmware"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.470650] 2 tplink-fw partitions found on MTD device firmware
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.476763] Creating 2 MTD partitions on "firmware":
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.481806] 0x000000000000-0x0000002182d0 : "kernel"
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.486852] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.498360] 0x0000002182d0-0x0000007a0000 : "rootfs"
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.503488] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.514021] mtd: device 3 (rootfs) set to be root filesystem
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.520855] 1 squashfs-split partitions found on MTD device rootfs
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.527223] 0x000000790000-0x0000007a0000 : "rootfs_data"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.534057] 0x0000007c0000-0x0000007d0000 : "config"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.542106] 0x0000007d0000-0x000000800000 : "factory"
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.600766] rt3050-esw 10110000.esw: mediatek esw at 0xb0110000, irq 25 initialized
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.609474] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.619804] NET: Registered protocol family 10
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.630241] Segment Routing with IPv6
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.634184] NET: Registered protocol family 17
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.638792] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.651966] 8021q: 802.1Q VLAN Support v1.8
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.657002] gpio-export gpio_export: 1 gpio(s) exported
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.670893] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.684923] Freeing unused kernel memory: 1204K
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.689520] This architecture does not have kernel memory protection.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.696095] Run /sbin/init as init process
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700242] with arguments:
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700248] /sbin/init
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700252] with environment:
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700257] HOME=/
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700262] TERM=linux
Sat Sep 3 20:56:19 2022 user.info kernel: [ 1.404290] init: Console is alive
Sat Sep 3 20:56:19 2022 user.info kernel: [ 1.408344] init: - watchdog -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.400337] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.470320] usbcore: registered new interface driver usbfs
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.476050] usbcore: registered new interface driver hub
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.481566] usbcore: registered new device driver usb
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.544984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 3.561979] SCSI subsystem initialized
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.573896] ehci-fsl: Freescale EHCI Host controller driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.581571] ehci-platform: EHCI generic platform driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.597415] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.604234] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.609531] ehci-platform 101c0000.ehci: EHCI Host Controller
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.615428] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.623635] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.652640] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.660107] hub 1-0:1.0: USB hub found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.664978] hub 1-0:1.0: 1 port detected
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.677564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.685707] ohci-platform: OHCI generic platform driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.691423] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.698422] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.706615] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.787719] hub 2-0:1.0: USB hub found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.792465] hub 2-0:1.0: 1 port detected
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.810496] usbcore: registered new interface driver usb-storage
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.820202] usbcore: registered new interface driver uas
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.827259] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.845285] init: - preinit -
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 4.815936] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.005596] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.118375] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.224477] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 5.790703] rt3050-esw 10110000.esw: port 0 link down
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 6.043354] random: procd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.914031] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.919053] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.926026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.330318] mount_root: loading kmods from internal overlay
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.400646] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.415788] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.801060] block: attempting to load /etc/config/fstab
Sat Sep 3 20:56:19 2022 user.err kernel: [ 10.815030] block: unable to load configuration (fstab: Entry not found)
Sat Sep 3 20:56:19 2022 user.err kernel: [ 10.822281] block: no usable configuration
Sat Sep 3 20:56:19 2022 user.notice kernel: [ 10.827825] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Sat Sep 3 20:56:19 2022 user.warn kernel: [ 10.853442] urandom-seed: Seed file not found (/etc/urandom.seed)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.982086] procd: - early -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.986299] procd: - watchdog -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 11.750170] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 11.865815] procd: - watchdog -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 11.873684] procd: - ubus -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 12.092885] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 12.102354] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 12.128889] procd: - init -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.230967] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.401828] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.414519] random: ubus: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 14.646267] kmodloader: loading kernel modules from /etc/modules.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 15.614753] urngd: v1.0.2 started.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.701263] fuse: init (API version 7.32)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.795201] usbcore: registered new interface driver cdc_acm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.800958] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.854445] usbcore: registered new interface driver cdc_wdm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.884336] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.892033] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.997275] usbcore: registered new interface driver usblp
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.046906] usbcore: registered new interface driver usbserial_generic
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.053731] usbserial: USB Serial support registered for generic
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.104722] usbcore: registered new interface driver cdc_ether
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.135786] usbcore: registered new interface driver cdc_ncm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.333737] usbcore: registered new interface driver huawei_cdc_ncm
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 16.568639] random: crng init done
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 16.572114] random: 34 urandom warning(s) missed due to ratelimiting
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.686812] mt76_wmac 10300000.wmac: ASIC revision: 76280001
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.785393] mt76_wmac 10300000.wmac: Firmware Version: 20151201
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.791420] mt76_wmac 10300000.wmac: Build Time: 20151201183641
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.812622] mt76_wmac 10300000.wmac: firmware init done
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 17.983658] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.235631] PPP generic driver version 2.4.2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.248872] NET: Registered protocol family 24
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.266010] usbcore: registered new interface driver qmi_wwan
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.285758] usbcore: registered new interface driver rndis_host
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.305405] usbcore: registered new interface driver sierra
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.311168] usbserial: USB Serial support registered for Sierra USB modem
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.335414] usbcore: registered new interface driver sierra_net
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.417404] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.425455] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.439093] usbcore: registered new interface driver cdc_mbim
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.461576] usbcore: registered new interface driver option
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.467418] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.504655] usbcore: registered new interface driver qcserial
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.510588] usbserial: USB Serial support registered for Qualcomm USB modem
Sat Sep 3 20:56:19 2022 user.info kernel: [ 18.541914] kmodloader: done loading kernel modules from /etc/modules.d/*
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Sep 3 20:56:23 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Sep 3 20:56:36 2022 authpriv.info dropbear[1648]: Not backgrounding
Sat Sep 3 20:56:41 2022 daemon.notice wpa_supplicant[1785]: Successfully initialized wpa_supplicant
Sat Sep 3 20:56:41 2022 kern.info kernel: [ 48.220717] rt3050-esw 10110000.esw: port 0 link down
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: bonding
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: 8021ad
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: 8021q
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: macvlan
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: veth
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: bridge
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: Network device
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: tunnel
Sat Sep 3 20:56:45 2022 kern.info kernel: [ 52.344051] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:47 2022 user.info adblock-4.1.3[1969]: backup directory '/tmp/adblock-Backup' created
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Sat Sep 3 20:56:49 2022 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Sat Sep 3 20:56:50 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Sat Sep 3 20:56:50 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Sat Sep 3 20:56:53 2022 daemon.err mount_root: failed - mount -t jffs2 /dev/mtdblock4 /rom/overlay: Not a tty
Sat Sep 3 20:56:53 2022 kern.err kernel: [ 60.303004] Too few erase blocks (1)
Sat Sep 3 20:56:53 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.740902] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.746656] br-lan: port 1(eth0.1) entered disabled state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.752516] device eth0.1 entered promiscuous mode
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.757450] device eth0 entered promiscuous mode
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.788012] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.793579] br-lan: port 1(eth0.1) entered forwarding state
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is enabled
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is setting up now
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is now up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: bridge 'br-lan' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is enabled
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is now up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Network device 'eth0' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Network device 'lo' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Sep 3 20:56:55 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Sat Sep 3 20:56:56 2022 kern.info kernel: [ 62.743123] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Sep 3 20:56:56 2022 daemon.err odhcpd[2038]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sat Sep 3 20:56:56 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Sep 3 20:57:00 2022 daemon.info urandom_seed[3108]: Seed saved (/etc/urandom.seed)
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Sep 3 20:57:00 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 1 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 1 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc HP
Sat Sep 3 20:57:05 2022 daemon.info procd: - init complete -
Sat Sep 3 20:57:23 2022 user.info adblock-4.1.3[1969]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Sat Sep 3 20:57:33 2022 user.info : luci: accepted login on / for root from 192.168.1.161
Sat Sep 3 20:57:45 2022 auth.err passwd: password for root changed by root
Sat Sep 3 20:57:54 2022 authpriv.info dropbear[3871]: Child connection from 192.168.1.161:64202
Sat Sep 3 20:57:59 2022 authpriv.notice dropbear[3871]: Password auth succeeded for 'root' from 192.168.1.161:64202Cześć, mam problem z zapamiętaniem ustawień na ruterze TP-Link TL-MR3020 v3.20.
Po restarcie wracają początkowe (domyślne) ustawienia. Poza tym problemem system OpenWrt działa super i szybko.
Openwrt wgrywałem przez FTP, korzystając z obrazów:
https://dl.eko.one.pl/firmware/?version=luci-22.03-SNAPSHOT&target=ramips%2Fmt76x8&id=tplink_tl-mr3020-v3Najpierw obraz TFTP-RECOVERY potem SYSUPGRADE.
Z góry dziękuję za pomoc
Nie będę już poprawiał pakietu/szukał recepty na błędy. Pakiet wymaga przepisania na nowe LuCI JS, bo już traci/stracił na funkcjonalności.
Czyli projekt nie będzie rozwijany ?
Źle... To nie jest urządzenie qmi tylko ncm.
option proto 'ncm'
option device '/dev/ttyACM0'
option apn 'internet'
A jak dodać nowy interfejs, do którego chciałbym podłączyć kabel z WANem ?
Tak, aby mieć 2 niezależne sieci. WAN z GSM i WAN po kablu.
no ale aby ustawić zewnętrzną trasę, trzeba mieć właśnie jakiegoś vpn'a, tylko jak go skonfigurować i co polecasz?
Ja polecam:
https://eko.one.pl/?p=openwrt-wireguard
lub
https://openwrt.org/docs/guide-user/ser … ard/server
https://openwrt.org/docs/guide-user/ser … ard/client
Moj apel.. jak ktos pobral zrodla / pakiet do instalacji to prosze chociaz o maly komentarz czy dziala, na czym.. moze ktos ma jeszcze jakis pomysl co dodac, jak polepszyc apke.. chce po prostu wiedziec ze ktos jej uzywa, taka mala motywacja dla autora..
Mimo tych błędów wysyłanie i odbieranie działa, ale może dałoby radę te błędy poprawić wtedy byłoby super.
Co do usuwania wiadomości, to mimo usunięcia smsa i odświeżenia listy, to sms ponownie się pokazuje.
Ciekawe jest to, że jak zaznaczę wszystkie smsy, to wszystkie usuwa i nic się nie pokazuje po odświeżeniu listy.
Mój modem to: /dev/ttyACM0 (karta Playa włożona do rutera)
Po instalacji pakietu:
- luci-app-sms-tool_1.9.5-20220816_all.ipk - wyrzuca błędy
root@OpenWrt:~# opkg install luci-app-sms-tool_1.9.5-20220816_all.ipk
Installing luci-app-sms-tool (1.9.5-20220816) to root...
Installing sms-tool (2022-03-21-f07699ab-1) to root...
Downloading https://dl.eko.one.pl/openwrt-22.03/packages/mips_24kc/base/sms-tool_2022-03-21-f07699ab-1_mips_24kc.ipk
Configuring sms-tool.
Configuring luci-app-sms-tool.
//usr/lib/opkg/info/luci-app-sms-tool.postinst: /etc/uci-defaults/start-smsled: line 5: /etc/init.d/smsled: Permission denied
uci: Entry not found
uci: Entry not found
uci: Parse error (invalid command) at line 1, byte 0
uci: Entry not found (invalid command) at line 1, byte 0
//usr/lib/opkg/info/luci-app-sms-tool.postinst: line 301: /etc/init.d/smsled: Permission denied
//usr/lib/opkg/info/luci-app-sms-tool.postinst: line 303: /etc/init.d/smsled: Permission deniedPo instalacji pakietu:
- luci-i18n-sms-tool-pl_unknown_all.ipk - wyrzuca błedy (brak języka PL)
root@OpenWrt:~# opkg install luci-i18n-sms-tool-pl_unknown_all.ipk
Installing luci-i18n-sms-tool-pl (unknown) to root...
Configuring luci-i18n-sms-tool-pl.
uci: Entry not found
uci: Entry not found
uci: Parse error (invalid command) at line 1, byte 0
uci: Entry not found (invalid command) at line 1, byte 0
Czemu? Hlink ma swoje api, możesz sobie skrypty napisać i wysyłać smsy z openwrt.
Cezary z całym szacunkiem, ale ja co najwyżej mogę, to napisać "Hello Word" 
bo tylko to umiem...
Musisz mieć możliwość wejścia w 192.168.8.1 przeglądarką - podłącz go jako jedyny w routerze i zobacz. SMSy masz w gui hlinka.
Tak, po podaniu adresu 192.168.8.1 pokazuje mi się panel.
Chciałem wdrożyć obsługę powiadomień sms na openwrt, ale z tego co widzę chyba będzie lipa...
Bo to jest modem HiLink , jego nie da się konfigurować przez smstool.
Zobacz ,czy wpisanie adresu 192.168.8.1 wyświetli Ci stronę modemu , i stamtąd wysyłaj.
Niestety na 192.168.8.1 nic się nie pokazuje.
A żeby mieć możliwość wysyłania i odbierania smsów, to muszę mieć kartę sim bezpośrednio w ruterze z modemem tak innej opcji nie ma ?
Cześć, czy da się pogodzić te 2 sprawy ze sobą co w temacie?
Chciałbym mieć redundalne połączenie z modemu USB w razie, jak główny WAN szlak trafi, ale dodatkowo chciałbym móc wysyłać smsy z modemu, który jest na USB.
Zainstalowałem sobie widok GUI modemu, ale nie potrafię go dobrze skonfigurować, bo niby pokazuje interfejs LTE USB0, ale czegoś takiego nie ma /dev/ttyusb0 więc nie działa.
Z góry dzięki za pomoc
P.S.
I co lepiej zainstalować smstools3 czy sms-tool ?
Dlaczego.... Dlaczego nie czytasz jak masz to zrobić tylko walisz jakieś randomowe znalezione polecenia które nie są do tego modelu? Ty tak serio, dla sportu czy po prostu lubisz ignorować słowo pisane?
https://github.com/openwrt/openwrt/comm … 055b7cef3e ten link dostałeś już kilka razy. Jest tam wyraźnie napisane co i jak masz zrobić, jakie polecenia i jakiej kolejności.
Nie wymyślaj sam jak to zrobić - masz zrobić dokładnie tak jak w opisie.
Ok przepraszam. Zrobię jak mówisz i już więcej nie zawracam gitary. Bardzo dziękuję za cierpliwość i pomoc.
P.S.
Udało mi się przywrócić soft fabryczny. Wszystko działa ruter już się nie restartuje.
Skorzystałem z:
https://eko.one.pl/forum/viewtopic.php?id=21846&p=13 post 302Systemu OpenWrt nie dało się zainstalować. Powód, restartowanie się rutera po ~5 lub 10min
CEZARY i MIG25 szacunek dla Was !!!
Router się wyłącza już na etapie wgrywania, także to już jest zapewne jakieś uszkodzenie przez moje eksperymentowanie na różnych wersjach..
Coś nie chce pójść dalej... Musiałem dać mu inne ip, bo sam nie zaciąga pliku tylko wczytuje oprogramowanie
setenv serverip 192.168.10.3
setenv ipaddr 192.168.10.72
set fdt_high 0x85000000
tftp nazwa_pliku
bootm 0x85000000
Nie. Tym bardziej jeżeli to modem resetuje sprzęt (bo ma taką władzę) to w systemie nic o tym nie znajdziesz.
Jak nie masz backupu to zobacz czy nie taką wersję miałes: https://dl.eko.one.pl/orig/zte_mf286r/T-MOBILE/ lub szukaj kogoś kto ma backup z takiej wersji.
Nie mam nic do stracenia... Taki router, to już ruter zepsuty więc muszę spróbować.
Pobiorę i wrzucę. To się robi jak z obrazami ? Przez ftp ?
192.0.0.1
255.0.0.0
Tak ?
Podczas ładowania systemu jest możliwość wyboru poziomu debaga 1,2,3,4.. Może tu coś można wyczytać ?
Nic w terminalu nie wyskakuje i nie mam jak zdiagnozować problemu. Po prostu ryp! i mrugająca dioda.
Ale dziwne, że w ogólne działa. Wygląda to jakby coś odpytywało coś i jeśli nie, to przejdź w stan zgonu.
Źle... To nie jest urządzenie qmi tylko ncm.
option proto 'ncm'
option device '/dev/ttyACM0'
option apn 'internet'
Tak, teraz interfejs jest ok.
Kurde, dalej się wyłącza...
Włóż mu kartę. Modem sam steruje routerem.
Jeżeli zrobiłeś sobie backupy partycji to tak, możesz znów wgrać oryginalny soft i zobaczyć czy wszystko działa. Jak to zrobić opis masz tutaj: https://github.com/openwrt/openwrt/comm … 055b7cef3e , w dalszym ciągu to ten sam opis.
A jak nie zrobiłem backupu ? Można jakoś z neta ściągnąć nowy obraz ZTE ?
Włóż mu kartę. Modem sam steruje routerem.
Jeżeli zrobiłeś sobie backupy partycji to tak, możesz znów wgrać oryginalny soft i zobaczyć czy wszystko działa. Jak to zrobić opis masz tutaj: https://github.com/openwrt/openwrt/comm … 055b7cef3e , w dalszym ciągu to ten sam opis.
Ok włożyłem kartę i dodałem wpis do konfiguracji w /etc/conf/network, bo miałem tylko LAN
config interface 'wan'
option proto 'qmi'
option device '/dev/cdc-wdm0'
option auth 'none'
option apn 'internet'
option pdptype 'ipv4'
Masz MF286R. Nie zwykły, nie A, nie D jak twierdziłeś na początku.
Na dodatek - jeżeli to mój soft to powinieneś miec od razu drivery. Co teraz wgrałeś?
Miałem wgraną wersje A, obecnie mam wgraną wersję R
Czy można wydebugować, dlatego ten ruter się wyłącza, to znaczy po jakiś 10min zaczyna mrugać tylko niebieska dioda.
Może już został uszkodzony?
Płyta główna zimna, nic się nie przegrzewa...
A jakby wgrać z powrotem oryginalne oprogramowanie, czy to mogło by pomóc ?
I to jest zły opis. Nie mieszaj poleceń dla innego modelu bo to nie działa. Tylko zepsujesz sprzęt.
Jak masz zainstalowany system to zrób
cat /sys/kernel/debug/usb/devices
i pokaż wynik, zobaczmy z którym modemem masz router i tym samym będzie wiadomo który to model.
Oto wynbiki:
root@OpenWrt:/# cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.10
S: Manufacturer=Linux 5.10.138 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=1b000000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1489 Rev=ff.ff
S: Manufacturer=ZTE
S: Product=ZTE
S: SerialNumber=123456789ABCD
C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 2mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=02 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=ff Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.10
S: Manufacturer=Linux 5.10.138 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=1b400000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256msMożez spróbować jeszcze raz . Spróbuj też wyjąć kartę sim , i zobcz czy wtedy będzie ok .
Nie mam w ogóle karty SIM w nim. Zrobiłem wszystko na nowo z wersją R i to samo, wyłącza się...
Może teraz zobaczyć z wersją A ?
Czy problem może leżeć po stronie softwaru, czy hardwaru ? Może trzeba wyczyścić jaką pamięć podręczną (cache) ?
Wydaje takie komendy:
set fdt_high 0x85000000
tftpboot 0x85000000 nazwa_pliku.bin
bootm 0x85000000
Czy ten nr 0x81000000 ma znaczenie ? Powinien być jakiś konkretny ?
Ja ten nr wziąłem z opisu w Internecie, a nie z urządzenia.
Szukam pomysłu, bo już nie wiem co to może być...
Widzę, że pliki, które wgrywam mają do 10Mb, a znalazłem plik na forum root_uImage, który ma ~37Mb, może ten plik, jakoś podmienić w routerze ?
Wgraeś wersję A , a na pierwszym screenie wykrył model MF286R .... (I to by się zgadzało , bo framewok też wykrył , że masz MF286R... ) Na pewno masz A ?
@MIG25 dziękuję.
Wgrałem poprawną wersję R.
Nazwa pliku: luci-22.03-snapshot-r19690-03c251ac14-ath79-nand-zte_mf286r-squashfs-sysupgrade
https://dl.eko.one.pl/firmware/?version=luci-22.03-SNAPSHOT&target=ath79%2Fnand&id=zte_mf286rTo samo wyłącza się...
Wgrałem na wszystko nowo.
Plik pierwszy: openwrt-22.03.0-ath79-nand-zte_mf286r-initramfs-kernel.bin
plik drugi: luci-22.03-snapshot-r19690-03c251ac14-ath79-nand-zte_mf286r-squashfs-sysupgrade.bin
Ok udało się zainstalować tryb recovery.
Polecenia, które wykonałem:
setenv serverip 192.168.10.3
setenv ipaddr 192.168.10.72
set fdt_high 0x85000000
tftpboot 0x85000000 mf286a-initramfs-kernel.bin
(pobrałem ze strony:https://firmware-selector.openwrt.org/?version=22.03.0&target=ath79%2Fnand&id=zte_mf286a)
bootm 0x85000000Potem przez GUI udało mi się wgrałem luci-22.03_zte_mf286a-squashfs-sysupgrade.bin, bo przez ssh, jakoś nie mogłem się połączyć.
Router mimo, że ma wgrane oprogramowanie, to się po pewnym czasie wyłącza (miga niebieska dioda)...
Można to jakoś zdiagnozować ?
Cały log z rozruchu:
U-Boot 1.1.4 (Jun 25 2019 - 11:21:44)
ap152 - Dragonfly 1.0DRAM:
sri
ath_ddr_initial_config(278): (ddr2 init)
ath_sys_frequency: cpu 775 ddr 650 ahb 258
Tap values = (0x10, 0x10, 0x10, 0x10)
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 409k for U-Boot at: 87f98000
Reserving 192k for malloc() at: 87f68000
Reserving 44 Bytes for Board Info at: 87f67fd4
Reserving 36 Bytes for Global Data at: 87f67fb0
Reserving 128k for boot params() at: 87f47fb0
Stack Pointer at: 87f47f98
Now running in RAM - U-Boot at: 87f98000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x15
flash size 2MB, sector count = 32
Flash: 2 MB
*** Warning - bad CRC, using default environment
Power up PLL with outdiv = 0 then switch to 3
In: serial
Out: serial
Err: serial
Net: ath_gmac_enet_initialize...
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
athr_mgmt_init (MDC/MDIO config)::done
Dragonfly ----> S17 PHY *
athrs17_reg_init: complete
Max resets limit reached exiting...
athr_gmac_sgmii_setup SGMII done
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:ff:ff:ff
ath_gmac_phy_setup
eth0 up
eth0
Qualcomm Atheros SPI NAND Driver, Version 0.1 (c) 2014 Qualcomm Atheros Inc.
ath_spi_nand_ecc: furture feat = 0x10
ath_spi_nand_ecc: middle feat = 0x10
zte ath_spi_nand_read_id 0xc8d1
zte ath_spi_nand_read_id 0xc8d1c8
zte debug gd 128 oob
====== NAND Parameters ======
sc addr = 0x87ff7290 page(write size) = 0x800 (erase size) block = 0x20000
Setting 0x181162c0 to 0x4b962100
Uaztemain: enter into !
zte_getHandOffState: read data=0xff from 0x0
Uaztemain: no need to update '▒'
Hit any key to stop autoboot: 0
Loading from device 0: ath-spi-nand (offset 0x1800000)
Image Name: MIPS OpenWrt Linux-5.10.138
Created: 2022-09-03 18:56:06 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 2435447 Bytes = 2.3 MB
Load Address: 80060000
Entry Point: 80060000
## Booting image at 81000000 ...
Image Name: MIPS OpenWrt Linux-5.10.138
Created: 2022-09-03 18:56:06 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 2435447 Bytes = 2.3 MB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum at 0x81000040 ...OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728
Starting kernel ...
[ 0.000000] Linux version 5.10.138 (cezary@eko.one.pl) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19162 -a036c1d43b) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sat Sep 3 18:56:06 2022
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] MIPS: machine is ZTE MF286A
[ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 120572K/131072K available (6347K kernel code, 599K rwdata, 784K rodata, 1220K init, 214K b ss, 10500K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 775.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[ 0.000008] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[ 0.008281] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.074811] pid_max: default: 32768 minimum: 301
[ 0.079804] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.087520] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.097700] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.108415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.118817] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.126085] pinctrl core: initialized pinctrl subsystem
[ 0.135594] NET: Registered protocol family 16
[ 0.140917] thermal_sys: Registered thermal governor 'step_wise'
[ 0.192173] clocksource: Switched to clocksource MIPS
[ 0.205017] NET: Registered protocol family 2
[ 0.209821] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.218210] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.227128] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.235229] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.242673] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.249493] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.256431] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.264069] NET: Registered protocol family 1
[ 0.268690] PCI: CLS 0 bytes, default 32
[ 0.278647] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.289007] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.295210] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.307216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.317518] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 0.324638] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.333474] printk: console [ttyS0] disabled
[ 0.338043] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[ 0.347187] printk: console [ttyS0] enabled
[ 0.347187] printk: console [ttyS0] enabled
[ 0.356252] printk: bootconsole [early0] disabled
[ 0.356252] printk: bootconsole [early0] disabled
[ 0.382748] spi-nand spi0.1: GigaDevice SPI NAND was found.
[ 0.388521] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 0.399354] 6 fixed-partitions partitions found on MTD device (null)
[ 0.406004] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[ 0.412882] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[ 0.420434] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[ 0.427326] OF: Bad cell count for /ahb/spi@1f000000/flash@1/partitions
[ 0.434924] Creating 6 MTD partitions on "(null)":
[ 0.439889] 0x000000000000-0x0000000a0000 : "fota-flag"
[ 0.449482] 0x0000000a0000-0x000000120000 : "art"
[ 0.456820] 0x000000120000-0x0000001a0000 : "mac"
[ 0.464254] 0x0000001a0000-0x000001800000 : "ubiconcat0"
[ 0.501087] 0x000001800000-0x000001c00000 : "kernel"
[ 0.513339] 0x000001c00000-0x000008000000 : "ubiconcat1"
[ 0.659408] spi-nor spi0.0: s25fl016k (2048 Kbytes)
[ 0.664541] 3 fixed-partitions partitions found on MTD device spi0.0
[ 0.671104] Creating 3 MTD partitions on "spi0.0":
[ 0.676081] 0x000000000000-0x0000000a0000 : "u-boot"
[ 0.683017] 0x0000000a0000-0x0000000c0000 : "u-boot-env"
[ 0.689422] 0x0000000c0000-0x000000200000 : "reserved1"
[ 0.698529] Concatenating MTD devices:
[ 0.702473] (0): "ubiconcat0"
[ 0.705533] (1): "ubiconcat1"
[ 0.708596] into device "ubi-concat"
[ 0.712324] 1 fixed-partitions partitions found on MTD device ubi-concat
[ 0.719246] Creating 1 MTD partitions on "ubi-concat":
[ 0.724568] 0x000000000000-0x000007a60000 : "ubi"
[ 1.426201] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
[ 2.083695] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8 316]
[ 2.094973] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
[ 2.103648] NET: Registered protocol family 10
[ 2.115786] Segment Routing with IPv6
[ 2.119681] NET: Registered protocol family 17
[ 2.124417] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to l oad br_netfilter if you need this.
[ 2.137814] 8021q: 802.1Q VLAN Support v1.8
[ 2.146070] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[ 2.152442] MEM 0x0000000012000000..0x0000000013ffffff
[ 2.157839] IO 0x0000000000000000..0x0000000000000000
[ 2.163419] PCI host bridge to bus 0000:00
[ 2.167665] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 2.174793] pci_bus 0000:00: root bus resource [io 0x0000]
[ 2.180550] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.187569] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.195810] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[ 2.202042] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 2.209195] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 2.216145] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 2.223050] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 2.235619] UBI: auto-attach mtd9
[ 2.239073] ubi0: attaching mtd9
[ 5.016514] ubi0: scanning is finished
[ 5.055358] ubi0: attached mtd9 (name "ubi", size 122 MiB)
[ 5.061030] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.068167] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.075196] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.082395] ubi0: good PEBs: 978, bad PEBs: 1, corrupted PEBs: 0
[ 5.088597] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.096063] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 39002626
[ 5.105317] ubi0: available PEBs: 0, total reserved PEBs: 978, PEBs reserved for bad PEB handling: 19
[ 5.114949] ubi0: background thread "ubi_bgt0d" started, PID 347
[ 5.124107] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.129781] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.161391] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.175477] Freeing unused kernel memory: 1220K
[ 5.180159] This architecture does not have kernel memory protection.
[ 5.186844] Run /sbin/init as init process
[ 6.029115] init: Console is alive
[ 6.033147] init: - watchdog -
[ 8.782094] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 8.875415] usbcore: registered new interface driver usbfs
[ 8.881141] usbcore: registered new interface driver hub
[ 8.886757] usbcore: registered new device driver usb
[ 8.946378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.961701] SCSI subsystem initialized
[ 8.971539] ehci-fsl: Freescale EHCI Host controller driver
[ 8.980111] ehci-platform: EHCI generic platform driver
[ 8.985910] ehci-platform 1b000000.usb: EHCI Host Controller
[ 8.991803] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 9.000054] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
[ 9.032196] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 9.039403] hub 1-0:1.0: USB hub found
[ 9.044073] hub 1-0:1.0: 1 port detected
[ 9.048972] ehci-platform 1b400000.usb: EHCI Host Controller
[ 9.054888] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
[ 9.063113] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000
[ 9.092197] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[ 9.099385] hub 2-0:1.0: USB hub found
[ 9.104074] hub 2-0:1.0: 1 port detected
[ 9.117098] usbcore: registered new interface driver usb-storage
[ 9.126035] usbcore: registered new interface driver uas
[ 9.132861] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 9.150782] init: - preinit -
[ 9.593282] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 10.072446] random: procd: uninitialized urandom read (4 bytes read)
[ 10.530990] random: jshn: uninitialized urandom read (4 bytes read)
[ 10.612467] random: jshn: uninitialized urandom read (4 bytes read)
[ 12.083689] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up
[ 12.092060] eth0: link up (1000Mbps/Full duplex)
[ 12.108946] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.124914] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 16.367996] mount_root: loading kmods from internal overlay
[ 16.427424] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 16.448901] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 17.123856] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 17.134285] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 511
[ 17.318712] UBIFS (ubi0:1): recovery needed
[ 17.732440] UBIFS (ubi0:1): recovery completed
[ 17.737120] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 17.745231] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 17.755481] UBIFS (ubi0:1): FS size: 112246784 bytes (107 MiB, 884 LEBs), journal size 5586944 bytes (5 MiB, 4 4 LEBs)
[ 17.766502] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 17.773356] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D1A9BA3E-1F31-42C8-8C91-7737B3B7A4EF, small LPT model
[ 17.795896] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 17.830028] block: extroot: not configured
[ 17.834594] UBIFS (ubi0:1): un-mount UBI device 0
[ 17.839495] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 17.856000] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 17.862427] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 514
[ 18.239301] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 18.247438] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 18.257688] UBIFS (ubi0:1): FS size: 112246784 bytes (107 MiB, 884 LEBs), journal size 5586944 bytes (5 MiB, 4 4 LEBs)
[ 18.268650] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 18.275491] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D1A9BA3E-1F31-42C8-8C91-7737B3B7A4EF, small LPT model
[ 18.306229] mount_root: loading kmods from internal overlay
[ 18.357762] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 18.372837] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 18.791620] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 18.817184] block: extroot: not configured
[ 18.829637] mount_root: switching to ubifs overlay
[ 18.870138] urandom-seed: Seeding with /etc/urandom.seed
[ 19.067023] eth0: link down
[ 19.100091] procd: - early -
[ 19.103503] procd: - watchdog -
[ 19.943065] random: jshn: uninitialized urandom read (4 bytes read)
[ 19.954736] procd: - watchdog -
[ 19.982031] procd: - ubus -
Failed to connect to ubus
[ 20.440176] random: ubusd: uninitialized urandom read (4 bytes read)
[ 20.453214] random: ubusd: uninitialized urandom read (4 bytes read)
[ 20.489395] procd: - init -
Please press Enter to activate this console.
[ 21.197741] random: jshn: uninitialized urandom read (4 bytes read)
[ 21.261645] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.279304] random: ubus: uninitialized urandom read (4 bytes read)
[ 22.988942] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.855584] kmodloader: loading kernel modules from /etc/modules.d/*
[ 24.366685] urngd: v1.0.2 started.
[ 24.626207] tun: Universal TUN/TAP device driver, 1.6
[ 24.678288] fuse: init (API version 7.32)
[ 24.703508] random: crng init done
[ 24.707038] random: 45 urandom warning(s) missed due to ratelimiting
[ 24.747760] cdc_acm 1-1:1.2: ttyACM0: USB ACM device
[ 24.762589] usbcore: registered new interface driver cdc_acm
[ 24.768441] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 24.788073] usbcore: registered new interface driver cdc_wdm
[ 24.813584] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 24.821412] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 24.898850] usbcore: registered new interface driver usblp
[ 24.925951] usbcore: registered new interface driver usbserial_generic
[ 24.932822] usbserial: USB Serial support registered for generic
[ 24.956989] usbcore: registered new interface driver cdc_ether
[ 24.972005] usbcore: registered new interface driver cdc_ncm
[ 25.041179] usbcore: registered new interface driver huawei_cdc_ncm
[ 25.635477] PPP generic driver version 2.4.2
[ 25.648161] NET: Registered protocol family 24
[ 25.665162] usbcore: registered new interface driver qmi_wwan
[ 25.687309] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-1b000000.usb-1, ZTE RNDIS device, de:21:f1:a 6:39:5c
[ 25.698531] usbcore: registered new interface driver rndis_host
[ 25.724495] usbcore: registered new interface driver sierra
[ 25.730339] usbserial: USB Serial support registered for Sierra USB modem
[ 25.764500] usbcore: registered new interface driver sierra_net
[ 25.788645] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 25.796786] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 25.896056] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56.
[ 25.912844] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 25.919604] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 35.025279] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[ 35.034847] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 35.054040] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-c trl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-sp ecial-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7
[ 35.396512] ath10k_pci 0000:00:00.0: Loading BDF type 0
[ 35.405107] ath10k_pci 0000:00:00.0: board_file api 2 bmi_id 0:16 crc32 f228337a
[ 37.177081] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 37.184874] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[ 37.234869] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 37.246187] ath10k_pci 0000:00:00.0: wmi print 'free: 114572 iram: 12644 sram: 29508'
[ 37.482187] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[ 37.651334] usbcore: registered new interface driver cdc_mbim
[ 37.679189] usbcore: registered new interface driver option
[ 37.685098] usbserial: USB Serial support registered for GSM modem (1-port)
[ 37.714237] usbcore: registered new interface driver qcserial
[ 37.720248] usbserial: USB Serial support registered for Qualcomm USB modem
[ 37.804170] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
[ 37.832756] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 60.786272] eth0: link up (1000Mbps/Full duplex)
[ 60.791076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 60.815656] br-lan: port 1(eth0.1) entered blocking state
[ 60.821242] br-lan: port 1(eth0.1) entered disabled state
[ 60.827258] device eth0.1 entered promiscuous mode
[ 60.832247] device eth0 entered promiscuous mode
[ 60.858755] br-lan: port 1(eth0.1) entered blocking state
[ 60.864386] br-lan: port 1(eth0.1) entered forwarding state
[ 61.979815] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
BusyBox v1.35.0 (2022-06-10 07:20:21 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 22.03-SNAPSHOT, r19690-03c251ac14 |
| |
| Build time: 2022-09-04 10:38 CEST |
| Cezary Jackiewicz, https://eko.one.pl |
| |
-----------------------------------------------------------------------------
| Machine: ZTE MF286A |
| Uptime: 0d, 00:01:26 |
| Load: 1.52 0.57 0.20 |
| Flash: total: 98.3MB, free: 93.5MB, used: 0% |
| Memory: total: 118.9MB, free: 92.9MB, used: 21% |
| Leases: 1 |
| lan: static, 192.168.9.3 |
-----------------------------------------------------------------------------
root@OpenWrt:/# [ 87.090088] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.To jest zrzut z wgranego obrazu ZTE MF286, także pobiorę ZTE MF286a, i zobaczę co się stanie...
Code: 41736000 32730001 000000c0 <8c910000> 8e230000 8e220004 0062102b 50400008 8c82004c
Disabling lock debugging due to kernel taint
mtdoops: Ready 25, 6 (no erase)
Kernel panic - not syncing: Attempted to kill init!
mtdoops: Ready 30, 7 (no erase)
Kernel panic - not syncing: _________6
Fixing recursive fault but reboot is needed!eko.one.pl → Posty przez armen10
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc