FAQ o OpenWrt | Sprzedam różne routery | Oddam

2022-07-01 12:27:13

Proszę.

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=1c1a000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=1c1a400.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=1c1b000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=2870 Rev= 0.01
S:  Manufacturer=Љ
S:  Product=Љ
S:  SerialNumber=Љ
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=160mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=1c1c000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=1c1d000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=1c1b400.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=1c1c400.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=08 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 5.04
S:  Manufacturer=Linux 5.4.188 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=1c1d400.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

To mam:

acme - 3.0.1-1
adb - android.5.0.2_r1-3
alsa-lib - 1.2.4-1
antfs-mount - 1
attr - 2.4.48-2
avahi-dbus-daemon - 0.8-7
base-files - 1442-r16554-1d4dea6d4f
bc - 1.06.95-1
block-mount - 2021-01-04-c53b1882-1
busybox - 1.33.2-2
ca-bundle - 20210119-1
ca-certificates - 20210119-1
cgi-io - 2021-09-08-98cef9dd-20
coreutils - 8.32-6
curl - 7.82.0-2
dbus - 1.13.12-1
dnsmasq - 2.85-8
dropbear - 2020.81-2
e2fsprogs - 1.45.6-2
ethtool - 5.10-1
fdisk - 2.36.1-2
fdk-aac - 2.0.1-4
ffmpeg - 4.3.3-1
firewall - 2021-03-23-61db17ed-1
fstools - 2021-01-04-c53b1882-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2020-10-25-9ef88681-2
hostapd-common - 2020-06-08-5a8b3662-40
htop - 3.1.2-1
ip-tiny - 5.11.0-3
ip6tables - 1.8.7-1
ipset - 7.6-1
iptables - 1.8.7-1
iptables-mod-conntrack-extra - 1.8.7-1
iptables-mod-ipopt - 1.8.7-1
iw - 5.9-8fab0c9e-3
jshn - 2021-05-16-b14c4688-2
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.4.188-1-ec28b25633072072a51a4b6693256be8
kmod-cfg80211 - 5.4.188+5.10.110-1-1
kmod-crypto-crc32c - 5.4.188-1
kmod-crypto-hash - 5.4.188-1
kmod-fs-antfs - 5.4.188+2020-02-10-b41ba529-2
kmod-fs-ext4 - 5.4.188-1
kmod-fs-vfat - 5.4.188-1
kmod-fuse - 5.4.188-1
kmod-input-core - 5.4.188-1
kmod-ip6tables - 5.4.188-1
kmod-ipt-conntrack - 5.4.188-1
kmod-ipt-conntrack-extra - 5.4.188-1
kmod-ipt-core - 5.4.188-1
kmod-ipt-ipopt - 5.4.188-1
kmod-ipt-ipset - 5.4.188-1
kmod-ipt-nat - 5.4.188-1
kmod-ipt-offload - 5.4.188-1
kmod-ipt-raw - 5.4.188-1
kmod-lib-crc-ccitt - 5.4.188-1
kmod-lib-crc16 - 5.4.188-1
kmod-mac80211 - 5.4.188+5.10.110-1-1
kmod-mii - 5.4.188-1
kmod-mt76-core - 5.4.188+2021-12-03-678071ef-4
kmod-mt76-usb - 5.4.188+2021-12-03-678071ef-4
kmod-mt76x02-common - 5.4.188+2021-12-03-678071ef-4
kmod-mt76x02-usb - 5.4.188+2021-12-03-678071ef-4
kmod-mt76x2-common - 5.4.188+2021-12-03-678071ef-4
kmod-mt76x2u - 5.4.188+2021-12-03-678071ef-4
kmod-mtd-rw - 5.4.188+git-20160214-2
kmod-nf-conntrack - 5.4.188-1
kmod-nf-conntrack6 - 5.4.188-1
kmod-nf-flow - 5.4.188-1
kmod-nf-ipt - 5.4.188-1
kmod-nf-ipt6 - 5.4.188-1
kmod-nf-nat - 5.4.188-1
kmod-nf-reject - 5.4.188-1
kmod-nf-reject6 - 5.4.188-1
kmod-nfnetlink - 5.4.188-1
kmod-nls-base - 5.4.188-1
kmod-nls-cp437 - 5.4.188-1
kmod-nls-iso8859-1 - 5.4.188-1
kmod-nls-utf8 - 5.4.188-1
kmod-ppp - 5.4.188-1
kmod-pppoe - 5.4.188-1
kmod-pppox - 5.4.188-1
kmod-scsi-core - 5.4.188-1
kmod-slhc - 5.4.188-1
kmod-sound-core - 5.4.188-1
kmod-tun - 5.4.188-1
kmod-usb-core - 5.4.188-1
kmod-usb-ehci - 5.4.188-1
kmod-usb-net - 5.4.188-1
kmod-usb-net-cdc-ether - 5.4.188-1
kmod-usb-net-rndis - 5.4.188-1
kmod-usb-serial - 5.4.188-1
kmod-usb-serial-pl2303 - 5.4.188-1
kmod-usb-storage - 5.4.188-1
kmod-usb2 - 5.4.188-1
lame-lib - 3.100-1
libatomic1 - 8.4.0-3
libattr - 2.4.48-2
libavahi-client - 0.8-7
libavahi-dbus-support - 0.8-7
libblkid1 - 2.36.1-2
libblobmsg-json20210516 - 2021-05-16-b14c4688-2
libbz2-1.0 - 1.0.8-1
libc - 1.1.24-3
libcap - 2.43-1
libcomerr0 - 1.45.6-2
libcurl4 - 7.82.0-2
libdaemon - 0.14-5
libdbus - 1.13.12-1
libevdev - 1.12.0-1
libexpat - 2.2.10-2
libext2fs2 - 1.45.6-2
libf2fs6 - 1.14.0-1
libfdisk1 - 2.36.1-2
libffmpeg-full - 4.3.3-1
libfuse1 - 2.9.9-1
libgcc1 - 8.4.0-3
libgcrypt - 1.8.7-2
libgmp10 - 6.2.1-1
libgnutls - 3.7.1-2
libgpg-error - 1.42-2
libip4tc2 - 1.8.7-1
libip6tc2 - 1.8.7-1
libipset13 - 7.6-1
libiwinfo-data - 2021-04-30-c45f0b58-2.1
libiwinfo-lua - 2021-04-30-c45f0b58-2.1
libiwinfo20210430 - 2021-04-30-c45f0b58-2.1
libjson-c5 - 0.15-2
libjson-script20210516 - 2021-05-16-b14c4688-2
libkmod - 27-2
liblua5.1.5 - 5.1.5-9
liblucihttp-lua - 2021-06-11-3dc89af4-1
liblucihttp0 - 2021-06-11-3dc89af4-1
liblzo2 - 2.10-4
libmnl0 - 1.0.4-2
libncurses6 - 6.2-3
libnettle8 - 3.6-1
libnghttp2-14 - 1.43.0-1
libnl-tiny1 - 2020-08-05-c291088f-2
libopenssl-conf - 1.1.1n-1
libopenssl1.1 - 1.1.1n-1
libpcap1 - 1.9.1-3.1
libpci - 3.7.0-2
libpcre - 8.44-3
libpopt0 - 1.16-2
libpthread - 1.1.24-3
libreadline8 - 8.1-1
librt - 1.1.24-3
libsmartcols1 - 2.36.1-2
libss2 - 1.45.6-2
libstdcpp6 - 8.4.0-3
libtasn1 - 4.16.0-1
libtirpc - 1.3.2-1
libubox20210516 - 2021-05-16-b14c4688-2
libubus-lua - 2021-06-30-4fc532c8-2
libubus20210630 - 2021-06-30-4fc532c8-2
libuci-lua - 2021-04-14-4b3db117-5
libuci20130104 - 2021-04-14-4b3db117-5
libuclient20201210 - 2021-05-14-6a6011df-1
libudev-zero - 1.0.0-1
liburing - 0.7-1
libusb-1.0-0 - 1.0.24-4
libustream-wolfssl20201210 - 2022-01-16-868fd881-1
libuuid1 - 2.36.1-2
libwolfssl5.2.0.99a5b54a - 5.2.0-stable-1
libx264 - 2020-10-26-1
libxtables12 - 1.8.7-1
logd - 2020-10-25-9ef88681-2
lua - 5.1.5-9
luci - git-20.074.84698-ead5e81
luci-app-acme - git-20.294.22655-09cfbb3
luci-app-firewall - git-22.089.67741-3856d50
luci-app-mwan3 - git-21.126.37401-0ddb72d
luci-app-openvpn - git-22.025.78298-e927a11
luci-app-opkg - git-21.312.69848-4745991
luci-app-samba4 - git-21.295.66822-2e989d8
luci-app-uhttpd - git-22.029.54375-df07e6b
luci-base - git-22.083.69138-0a0ce2a
luci-compat - git-22.046.85744-f08a0f6
luci-i18n-acme-de - git-22.085.24753-f4a5b6c
luci-i18n-acme-en - git-22.085.24753-f4a5b6c
luci-i18n-acme-pl - git-22.085.24753-f4a5b6c
luci-i18n-base-de - git-22.099.58713-fe09ab9
luci-i18n-base-en - git-22.099.58713-fe09ab9
luci-i18n-base-pl - git-22.099.58713-fe09ab9
luci-i18n-firewall-de - git-22.089.67741-3856d50
luci-i18n-firewall-en - git-22.089.67741-3856d50
luci-i18n-firewall-pl - git-22.089.67741-3856d50
luci-i18n-mwan3-de - git-22.099.58713-fe09ab9
luci-i18n-mwan3-en - git-22.099.58713-fe09ab9
luci-i18n-mwan3-pl - git-22.099.58713-fe09ab9
luci-i18n-openvpn-de - git-22.099.58713-fe09ab9
luci-i18n-openvpn-en - git-22.099.58713-fe09ab9
luci-i18n-openvpn-pl - git-22.099.58713-fe09ab9
luci-i18n-opkg-de - git-22.085.24753-f4a5b6c
luci-i18n-opkg-en - git-22.085.24753-f4a5b6c
luci-i18n-opkg-pl - git-22.085.24753-f4a5b6c
luci-i18n-samba4-de - git-22.099.58713-fe09ab9
luci-i18n-samba4-en - git-22.099.58713-fe09ab9
luci-i18n-samba4-pl - git-22.099.58713-fe09ab9
luci-i18n-uhttpd-de - git-22.099.58713-fe09ab9
luci-i18n-uhttpd-en - git-22.099.58713-fe09ab9
luci-i18n-uhttpd-pl - git-22.099.58713-fe09ab9
luci-lib-base - git-20.232.39649-1f6dc29
luci-lib-ip - git-20.250.76529-62505bd
luci-lib-jsonc - git-22.097.61937-bc85ba5
luci-lib-nixio - git-20.234.06894-c4a4e43
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-22.046.85061-dd54dce
luci-mod-status - git-22.046.85784-0ac2542
luci-mod-system - git-22.019.40321-7a37d02
luci-proto-ipv6 - git-21.148.49484-14511e5
luci-proto-ppp - git-21.163.64918-6c6559a
luci-theme-bootstrap - git-22.084.39047-f1d687e
mailsend - 1.19-2
minicom - 2.7.1-2
mkf2fs - 1.14.0-1
mtd - 26
mwan3 - 2.10.13-1
nano - 6.2-2
netifd - 2021-10-30-8f82742c-1
nmap - 7.80-3
ntfs-3g - 2017.3.23-6-fuseint
ntfs-3g-utils - 2017.3.23-6-fuseint
odhcp6c - 2021-01-09-53f07e90-16
odhcpd-ipv6only - 2021-07-18-bc9d317f-3
openssl-util - 1.1.1n-1
openvpn-openssl - 2.5.3-3
openwrt-keyring - 2021-02-20-49283916-2
opkg - 2021-06-13-1bf042dd-1
parted - 3.4-1
partx-utils - 2.36.1-2
pciids - 0.354-1
pciutils - 3.7.0-2
picocom - 3.1-5
ppp - 2.4.8.git-2020-10-03-3
ppp-mod-pppoe - 2.4.8.git-2020-10-03-3
procd - 2021-03-08-2cfc26f8-1
procps-ng - 3.3.16-3
pv - 1.6.6-1
rpcd - 2022-02-19-8d26a1ba-1
rpcd-mod-file - 2022-02-19-8d26a1ba-1
rpcd-mod-iwinfo - 2022-02-19-8d26a1ba-1
rpcd-mod-luci - 20210614
rpcd-mod-rrdns - 20170710
samba4-client - 4.14.12-1
samba4-libs - 4.14.12-1
samba4-server - 4.14.12-1
screen - 4.8.0-2
socat - 1.7.3.4-2
terminfo - 6.2-3
uboot-envtools - 2021.01-13
ubox - 2020-10-25-9ef88681-2
ubus - 2021-06-30-4fc532c8-2
ubusd - 2021-06-30-4fc532c8-2
uci - 2021-04-14-4b3db117-5
uclient-fetch - 2021-05-14-6a6011df-1
uhttpd - 2021-03-21-15346de8-2
uhttpd-mod-ubus - 2021-03-21-15346de8-2
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usb-modeswitch - 2017-12-19-f40f84c2-2
usbids - 0.354-1
usbutils - 013-2
usign - 2020-05-23-f1f65026-1
wget-ssl - 1.21.1-1
wireless-regdb - 2021.08.28-1
wpad - 2020-06-08-5a8b3662-40
wsdd2 - 2021-08-09-bcc51c3e-1
zlib - 1.2.11-4

I jeszcze log z uruchomienia:

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.188 (root@Intel-D510MO) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 SMP Sat Apr 16 12:59:34 2022
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi NEO
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30924 r8192 d22324 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 505964K/524288K available (6612K kernel code, 426K rwdata, 1808K rodata, 2048K init, 245K bss, 18324K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x2fc/0x4ac with crng_init=0
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000140] Console: colour dummy device 80x30
[    0.000192] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000204] pid_max: default: 32768 minimum: 301
[    0.000378] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000390] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001345] CPU: Testing write buffer coherency: ok
[    0.001804] /cpus/cpu@0 missing clock-frequency property
[    0.001824] /cpus/cpu@1 missing clock-frequency property
[    0.001839] /cpus/cpu@2 missing clock-frequency property
[    0.001853] /cpus/cpu@3 missing clock-frequency property
[    0.001864] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002384] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002509] rcu: Hierarchical SRCU implementation.
[    0.003053] smp: Bringing up secondary CPUs ...
[    0.013821] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024705] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035493] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035583] smp: Brought up 1 node, 4 CPUs
[    0.035602] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035608] CPU: All CPU(s) started in HYP mode.
[    0.035613] CPU: Virtualization extensions available.
[    0.040162] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.040411] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.040435] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.040754] pinctrl core: initialized pinctrl subsystem
[    0.041964] NET: Registered protocol family 16
[    0.042432] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.043873] No ATAGs?
[    0.062914] SCSI subsystem initialized
[    0.064005] usbcore: registered new interface driver usbfs
[    0.064094] usbcore: registered new interface driver hub
[    0.064181] usbcore: registered new device driver usb
[    0.064352] pps_core: LinuxPPS API ver. 1 registered
[    0.064361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.064403] PTP clock support registered
[    0.064947] Advanced Linux Sound Architecture Driver Initialized.
[    0.066057] clocksource: Switched to clocksource arch_sys_counter
[    0.071960] thermal_sys: Registered thermal governor 'step_wise'
[    0.072352] NET: Registered protocol family 2
[    0.072566] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.073205] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.073238] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.073282] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.073345] TCP: Hash tables configured (established 4096 bind 4096)
[    0.073459] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.073508] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.073727] NET: Registered protocol family 1
[    0.074706] kvm [1]: vgic interrupt IRQ16
[    0.074860] kvm [1]: Hyp mode initialized successfully
[    0.076336] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.083004] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.083181] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.085315] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.089777] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.091447] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.098760] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.100306] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    0.100760] printk: console [ttyS0] disabled
[    0.120954] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 39, base_baud = 1500000) is a U6_16550A
[    0.684694] printk: console [ttyS0] enabled
[    0.694792] loop: module loaded
[    0.700996] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    0.707407] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    0.713465] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    0.719277] dwmac-sun8i 1c30000.ethernet: No regulator found
[    0.725219] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
[    0.734654] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    0.741889] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    0.749116] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    0.754074] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    0.760865] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    0.766530] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    0.772196] dwmac-sun8i 1c30000.ethernet: device MAC address 8e:0c:ad:8b:79:41
[    0.780345] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    0.786632] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    0.792990] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    0.800505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.807059] ehci-platform: EHCI generic platform driver
[    0.812494] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.818113] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.826021] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
[    0.856074] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.862403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.870684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.877910] usb usb1: Product: EHCI Host Controller
[    0.882782] usb usb1: Manufacturer: Linux 5.4.188 ehci_hcd
[    0.888270] usb usb1: SerialNumber: 1c1a000.usb
[    0.893286] hub 1-0:1.0: USB hub found
[    0.897110] hub 1-0:1.0: 1 port detected
[    0.901977] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.908205] ohci-platform: OHCI generic platform driver
[    0.913606] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    0.920251] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    0.928139] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400
[    1.000259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.008539] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.015752] usb usb2: Product: Generic Platform OHCI controller
[    1.021674] usb usb2: Manufacturer: Linux 5.4.188 ohci_hcd
[    1.027162] usb usb2: SerialNumber: 1c1a400.usb
[    1.032130] hub 2-0:1.0: USB hub found
[    1.035918] hub 2-0:1.0: 1 port detected
[    1.040859] usbcore: registered new interface driver usb-storage
[    1.047138] mousedev: PS/2 mouse device common for all mice
[    1.053055] i2c /dev entries driver
[    1.057326] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.067062] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    1.077612] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.107405] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.114999] sun8i-h3-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
[    1.128970] NET: Registered protocol family 10
[    1.134470] Segment Routing with IPv6
[    1.138253] NET: Registered protocol family 17
[    1.142739] can: controller area network core (rev 20170425 abi 9)
[    1.148988] NET: Registered protocol family 29
[    1.153430] 8021q: 802.1Q VLAN Support v1.8
[    1.157734] Registering SWP/SWPB emulation handler
[    1.173126] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[    1.184585] ehci-platform 1c1b000.usb: EHCI Host Controller
[    1.190225] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    1.198134] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000
[    1.236062] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    1.242213] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.250424] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.258704] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.265916] usb usb3: Product: EHCI Host Controller
[    1.270800] usb usb3: Manufacturer: Linux 5.4.188 ehci_hcd
[    1.276289] usb usb3: SerialNumber: 1c1b000.usb
[    1.281437] hub 3-0:1.0: USB hub found
[    1.285252] mmc0: new high speed SDHC card at address aaaa
[    1.291032] hub 3-0:1.0: 1 port detected
[    1.295588] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[    1.301902] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.307603] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    1.315491] ehci-platform 1c1c000.usb: irq 30, io mem 0x01c1c000
[    1.321579]  mmcblk0: p1 p2 p3
[    1.346078] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.352374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.360657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.367884] usb usb4: Product: EHCI Host Controller
[    1.372756] usb usb4: Manufacturer: Linux 5.4.188 ehci_hcd
[    1.378246] usb usb4: SerialNumber: 1c1c000.usb
[    1.383239] hub 4-0:1.0: USB hub found
[    1.387105] hub 4-0:1.0: 1 port detected
[    1.391893] ehci-platform 1c1d000.usb: EHCI Host Controller
[    1.397531] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    1.405417] ehci-platform 1c1d000.usb: irq 32, io mem 0x01c1d000
[    1.436074] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    1.442358] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.450639] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.457863] usb usb5: Product: EHCI Host Controller
[    1.462735] usb usb5: Manufacturer: Linux 5.4.188 ehci_hcd
[    1.468223] usb usb5: SerialNumber: 1c1d000.usb
[    1.473174] hub 5-0:1.0: USB hub found
[    1.476991] hub 5-0:1.0: 1 port detected
[    1.481695] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.488357] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    1.496281] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400
[    1.570248] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.578530] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.585744] usb usb6: Product: Generic Platform OHCI controller
[    1.586062] usb 3-1: new high-speed USB device number 2 using ehci-platform
[    1.591670] usb usb6: Manufacturer: Linux 5.4.188 ohci_hcd
[    1.604091] usb usb6: SerialNumber: 1c1b400.usb
[    1.609084] hub 6-0:1.0: USB hub found
[    1.612871] hub 6-0:1.0: 1 port detected
[    1.617652] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.624286] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    1.632180] ohci-platform 1c1c400.usb: irq 31, io mem 0x01c1c400
[    1.710258] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.718533] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.725746] usb usb7: Product: Generic Platform OHCI controller
[    1.731669] usb usb7: Manufacturer: Linux 5.4.188 ohci_hcd
[    1.737156] usb usb7: SerialNumber: 1c1c400.usb
[    1.742144] hub 7-0:1.0: USB hub found
[    1.745935] hub 7-0:1.0: 1 port detected
[    1.750644] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    1.757303] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    1.765186] ohci-platform 1c1d400.usb: irq 33, io mem 0x01c1d400
[    1.807293] usb 3-1: New USB device found, idVendor=0e8d, idProduct=2870, bcdDevice= 0.01
[    1.815470] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.822617] usb 3-1: Product: Љ
[    1.825848] usb 3-1: Manufacturer: Љ
[    1.829527] usb 3-1: SerialNumber: Љ
[    1.833846] usb-storage 3-1:1.0: USB Mass Storage device detected
[    1.840287] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.840352] scsi host0: usb-storage 3-1:1.0
[    1.848567] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.859964] usb usb8: Product: Generic Platform OHCI controller
[    1.865878] usb usb8: Manufacturer: Linux 5.4.188 ohci_hcd
[    1.871369] usb usb8: SerialNumber: 1c1d400.usb
[    1.876392] hub 8-0:1.0: USB hub found
[    1.880183] hub 8-0:1.0: 1 port detected
[    1.884936] ALSA device list:
[    1.887936]   No soundcards found.
[    1.903926] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.911514] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.920442] Freeing unused kernel memory: 2048K
[    1.996251] Run /sbin/init as init process
[    2.060033] init: Console is alive
[    2.063647] init: - watchdog -
[    2.240730] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.258707] ANTFS Module: Version 07.19-b41ba529
[    2.269326] ehci-fsl: Freescale EHCI Host controller driver
[    2.279285] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.289080] init: - preinit -
[    2.360194] random: fast init done
[    2.476998] random: jshn: uninitialized urandom read (4 bytes read)
[    2.505044] random: jshn: uninitialized urandom read (4 bytes read)
[    2.525506] random: jshn: uninitialized urandom read (4 bytes read)
[    2.598280] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY]
[    2.606905] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[    2.614220] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[    2.621935] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[    2.628477] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    2.877142] scsi 0:0:0:0: CD-ROM            MediaTek Flash autorun    0.01 PQ: 0 ANSI: 0 CCS
[    6.722635] mount_root: mounting /dev/root
[    6.727562] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[    6.749147] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.754762] mount_root: loading kmods from internal overlay
[    6.773655] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.781452] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.901999] block: attempting to load /etc/config/fstab
[    6.909115] block: extroot: not configured
[    6.956976] urandom-seed: Seeding with /etc/urandom.seed
[    6.994603] procd: - early -
[    6.998205] procd: - watchdog -
[    7.105162] urandom_read: 3 callbacks suppressed
[    7.105173] random: jshn: uninitialized urandom read (4 bytes read)
[    7.196847] random: jshn: uninitialized urandom read (4 bytes read)
[    7.279377] random: jshn: uninitialized urandom read (4 bytes read)
[    7.559247] procd: - watchdog -
[    7.565709] procd: - ubus -
[    7.621123] procd: - init -
Please press Enter to activate this console.
[    7.938946] urngd: v1.0.2 started.
[    7.973216] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.990530] crng init done
[    7.993271] random: 1 urandom warning(s) missed due to ratelimiting
[    8.011026] tun: Universal TUN/TAP device driver, 1.6
[    8.061056] fuse: init (API version 7.31)
[    8.103667] Loading modules backported from Linux version v5.10.110-0-g3238bffaf992
[    8.111445] Backport generated by backports.git v5.10.110-1-0-g1fbde860
[    8.149221] usbcore: registered new interface driver usbserial_generic
[    8.155912] usbserial: USB Serial support registered for generic
[    8.194122] xt_time: kernel timezone is -0000
[    8.201038] usbcore: registered new interface driver cdc_ether
[    8.275048] usbcore: registered new interface driver mt76x2u
[    8.301700] usbcore: registered new interface driver pl2303
[    8.307471] usbserial: USB Serial support registered for pl2303
[    8.317264] PPP generic driver version 2.4.2
[    8.323381] NET: Registered protocol family 24
[    8.330264] usbcore: registered new interface driver rndis_host
[    8.358382] kmodloader: done loading kernel modules from /etc/modules.d/*
[   12.154562] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY]
[   12.163530] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[   12.170917] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[   12.178657] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[   12.185219] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
[   12.206464] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
[   12.944180] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.952525] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.961096] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.969601] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.978036] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.986379] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use
[   12.994430] usb 3-1: usbfs: process 3294 (usbmode) did not claim interface 0 before use

2022-07-01 12:21:36

Nie mam w repo czegoś takiego jak: usb-storage.
Mam zainstalowany kmod-usb-storage.
Nie mam zainstalowanych: kmod-usb-storage-extras oraz kmod-usb-storage-uas

2022-07-01 11:44:46

Tak, udostępnia dysk ze sterownikiem. Widzę go na Windows, jest to dokładnie CDROM, ale nie widzę w /dev/ czegoś w stylu sdaX

2022-07-01 11:39:38

To nie działa:

# echo "3-1" | tee /sys/bus/usb/drivers/usb/unbind
3-1
# echo "3-1" | tee /sys/bus/usb/drivers/usb/bind
3-1

Przypomnisz, jak zrobić eject takiego dysku?

2022-07-01 11:22:27

Co innego by ją przełączało po ręcznym odłączeniu od portu i ponownym podłączeniu?
Zobacz, wpis jest...

# cat /etc/usb-mode.json

...
    "0e8d:2870": {
            "*": {
                    "t_vendor": 3725,
                    "t_product": [ 30226 ],
                    "mode": "StandardEject",
                    "msg": [  ]
            }
    },
...

Ręczne odłączenie i ponowne podłączenie do portu:

[   34.587271] usb 3-1: USB disconnect, device number 2
[   35.896319] usb 3-1: new high-speed USB device number 3 using ehci-platform
[   36.097513] usb 3-1: New USB device found, idVendor=0e8d, idProduct=2870, bcdDevice= 0.01
[   36.105754] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   36.112959] usb 3-1: Product: Љ
[   36.116219] usb 3-1: Manufacturer: Љ
[   36.119885] usb 3-1: SerialNumber: Љ
[   36.124559] usb-storage 3-1:1.0: USB Mass Storage device detected
[   36.133206] scsi host0: usb-storage 3-1:1.0
[   36.319172] usb 3-1: USB disconnect, device number 3
[   37.246224] usb 3-1: new high-speed USB device number 4 using ehci-platform
[   37.448250] usb 3-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00
[   37.456532] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   37.463714] usb 3-1: Product: Wireless
[   37.467611] usb 3-1: Manufacturer: MediaTek Inc.
[   37.472240] usb 3-1: SerialNumber: 000000000
[   37.646347] usb 3-1: reset high-speed USB device number 4 using ehci-platform
[   37.848248] mt76x2u 3-1:1.0: ASIC revision: 76120044
[   37.906010] mt76x2u 3-1:1.0: ROM patch build: 20141115060606a
[   38.078839] mt76x2u 3-1:1.0: Firmware Version: 0.0.00
[   38.083926] mt76x2u 3-1:1.0: Build: 1
[   38.087664] mt76x2u 3-1:1.0: Build Time: 201507311614____

usbmode -s i w logread brak wpisów...

2022-07-01 11:16:29

Niestety, to nie działa. Uruchomiłem system i sprawdziłem lsusb:

Bus 003 Device 002: ID 0e8d:2870 Љ Љ

Następnie ręcznie wprowadziłem: usbmode -s
I karta wlan nie przełącza się

# usbmode -h
usbmode: unrecognized option: h
Usage: usbmode <command> <options>
Commands:
        -l              List matching devices
        -s              Modeswitch matching devices

Options:
        -v              Verbose output
        -c <file>       Set configuration file to <file> (default: /etc/usb-mode.json)


# usbmode -c /etc/usb-mode.json


# usbmode -v


# usbmode -l
Found device: 0e8d:2870 (Manufacturer: "?", Product: "?", Serial: "?")


# usbmode -s


# lsusb
Bus 003 Device 002: ID 0e8d:2870 Љ Љ

2022-07-01 10:53:19

Cześć,

Mam jeszcze taki problem z kartą MT7612U.

Jeśli złożę set, a następnie uruchomię zasilanie to po uruchomieniu systemu karta nie przełącza się:

Bus 003 Device 002: ID 0e8d:2870 Љ Љ

Jeśli wtedy odłączę kartę od portu USB i podłącze ją ponownie przełącza się prawidłowo:

Bus 003 Device 004: ID 0e8d:7612 MediaTek Inc. Wireless

i następnie muszę wydać polecenie: wifi

Jak można to naprawić? Jak ręcznie wywołać usb-modeswitch żeby działało np. z rc.local?

2022-06-28 18:52:58

Dodam, że pakiet aktualnie po 10 latach nie istnieje w repo.
Zainstalować ntfs-3g-utils, a następnie użyć poleceniem mkntfs.

2022-06-20 00:43:59

Działa wyśmienicie, ekstra! ;-)

Zastanawia mnie ten wpis z dtsa, co on oznacza?

&usbphy {
        usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};

Sprawdziłem jeszcze kwestię GPIO, poniżej moje notatki.

Chciałbym uruchomić GPIO na PG11 oraz UART1 czyli PG6, PG7, PG8 i PG9.
Co muszę jeszcze dopisać do tego dtsa?

2022-06-19 20:28:00

Skopiowałem tego dtsa:
cp ./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts ./sun8i-h3-nanopi-neo.dts

Zrobiłem zmiany, difa i to mój patch:

--- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
@@ -51,6 +51,18 @@
     status = "okay";
 };
 
+&ehci1 {
+    status = "okay";
+};
+
+&ehci2 {
+    status = "okay";
+};
+
+&ehci3 {
+    status = "okay";
+};
+
 &emac {
     phy-handle = <&int_mii_phy>;
     phy-mode = "mii";
@@ -62,6 +74,18 @@
     status = "okay";
 };
 
+&ohci1 {
+        status = "okay";
+};
+
+&ohci2 {
+        status = "okay";
+};
+
+&ohci3 {
+        status = "okay";
+};
+
 &usb_otg {
     status = "okay";
     dr_mode = "peripheral";

Dalej wyrzuca błąd:

Applying /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch using plaintext:
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts
|+++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
--------------------------
No file to patch.  Skipping patch.
2 out of 2 hunks ignored
Patch failed!  Please fix /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch!
make[4]: *** [Makefile:40: /root/OpenWRT/openwrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/.prepared_21e3fd19a9affaddb317f9a9518c4c71] Error 1
make[4]: Leaving directory '/root/OpenWRT/openwrt/target/linux/sunxi'
make[3]: *** [Makefile:11: compile] Error 2
make[3]: Leaving directory '/root/OpenWRT/openwrt/target/linux'
time: target/linux/compile#42.98#42.96#59.30
    ERROR: target/linux failed to build.
make[2]: *** [target/Makefile:25: target/linux/compile] Error 1
make[2]: Leaving directory '/root/OpenWRT/openwrt'
make[1]: *** [target/Makefile:18: /root/OpenWRT/openwrt/staging_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/stamp/.target_compile] Error 2
make[1]: Leaving directory '/root/OpenWRT/openwrt'
make: *** [/root/OpenWRT/openwrt/include/toplevel.mk:230: world] Błąd 2

2022-06-19 20:00:58

Zrobiłem diffa, dalej jest źle:

diff -u ./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts ./sun8i-h3-nanopi-neo.dts > ./target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch

--- ./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts    2022-06-19 20:53:01.899071623 +0200
+++ ./sun8i-h3-nanopi-neo.dts    2022-06-19 20:52:01.425772754 +0200
@@ -71,3 +71,26 @@
     usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 };
 
+&ehci1 {
+        status = "okay";
+};
+
+&ehci2 {
+        status = "okay";
+};
+
+&ehci3 {
+        status = "okay";
+};
+
+&ohci1 {
+        status = "okay";
+};
+
+&ohci2 {
+        status = "okay";
+};
+
+&ohci3 {
+        status = "okay";
+};

Wynik kompilacji:

Applying /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch using plaintext:
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- ./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts       2022-06-19 20:53:01.899071623 +0200
|+++ ./sun8i-h3-nanopi-neo.dts  2022-06-19 20:52:01.425772754 +0200
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
Patch failed!  Please fix /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch!
make[4]: *** [Makefile:40: /root/OpenWRT/openwrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/.prepared_6ca7f032a9ae7f44a5e614ac30177b86] Error 1
make[4]: Leaving directory '/root/OpenWRT/openwrt/target/linux/sunxi'
make[3]: *** [Makefile:11: compile] Error 2
make[3]: Leaving directory '/root/OpenWRT/openwrt/target/linux'
time: target/linux/compile#43.51#45.03#61.82
    ERROR: target/linux failed to build.
make[2]: *** [target/Makefile:25: target/linux/compile] Error 1
make[2]: Leaving directory '/root/OpenWRT/openwrt'
make[1]: *** [target/Makefile:18: /root/OpenWRT/openwrt/staging_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/stamp/.target_compile] Error 2
make[1]: Leaving directory '/root/OpenWRT/openwrt'
make: *** [/root/OpenWRT/openwrt/include/toplevel.mk:230: world] Błąd 2

2022-06-19 16:08:45

Na razie próbuje ogarnąć tą łatkę:
./target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch

--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -73,0 +73,23 @@
+&ohci1 {
+    status = "okay";
+};
+
+&ohci2 {
+    status = "okay";
+};
+
+&ohci3 {
+    status = "okay";
+};
+
+&ehci1 {
+    status = "okay";
+};
+
+&ehci2 {
+    status = "okay";
+};
+
+&ehci3 {
+    status = "okay";
+};

Gdzie jeszcze popełniam błąd?

2022-06-19 15:50:24

Cezary napisał/a:

Weź sobie obraz z https://dl.eko.one.pl/test/ i sprawdź czy działają usb.
Nie kompilowałem tego, to zmodyfikowany dts i obraz złożony imagebuilderem.

Działa - 0e8d:2870 to mój diwajs podłączony do tych goldpinów;-)

# lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux 5.10.120 ohci_hcd Generic Platform OHCI controller
Bus 002 Device 001: ID 1d6b:0001 Linux 5.10.120 ohci_hcd Generic Platform OHCI controller
Bus 004 Device 002: ID 0e8d:2870 Љ Љ
Bus 004 Device 001: ID 1d6b:0002 Linux 5.10.120 ehci_hcd EHCI Host Controller
Bus 006 Device 001: ID 1d6b:0001 Linux 5.10.120 ohci_hcd Generic Platform OHCI controller
Bus 008 Device 001: ID 1d6b:0001 Linux 5.10.120 ohci_hcd Generic Platform OHCI controller
Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.120 ehci_hcd EHCI Host Controller
Bus 003 Device 001: ID 1d6b:0002 Linux 5.10.120 ehci_hcd EHCI Host Controller
Bus 005 Device 001: ID 1d6b:0002 Linux 5.10.120 ehci_hcd EHCI Host Controller

Pochwal się, co zrobiłeś?

2022-06-19 15:30:27

Zrobiłem tak:

./target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+&ohci1 {
+    status = "okay";
+};
+
+&ohci2 {
+    status = "okay";
+};
+
+&ohci3 {
+    status = "okay";
+};
+
+&ehci1 {
+    status = "okay";
+};
+
+&ehci2 {
+    status = "okay";
+};
+
+&ehci3 {
+    status = "okay";
+};

i wyrzuciło taki błąd:

Applying /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch using plaintext:
patch unexpectedly ends in middle of line
patch: **** Only garbage was found in the patch input.
Patch failed!  Please fix /root/OpenWRT/openwrt/target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch!
make[4]: *** [Makefile:40: /root/OpenWRT/openwrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/.prepared_ccbd97ba80864b6d00cc83407518c3dc] Error 1
make[4]: Leaving directory '/root/OpenWRT/openwrt/target/linux/sunxi'
make[3]: *** [Makefile:11: compile] Error 2
make[3]: Leaving directory '/root/OpenWRT/openwrt/target/linux'
time: target/linux/compile#43.37#43.13#59.55
    ERROR: target/linux failed to build.
make[2]: *** [target/Makefile:25: target/linux/compile] Error 1
make[2]: Leaving directory '/root/OpenWRT/openwrt'
make[1]: *** [target/Makefile:18: /root/OpenWRT/openwrt/staging_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/stamp/.target_compile] Error 2
make[1]: Leaving directory '/root/OpenWRT/openwrt'
make: *** [/root/OpenWRT/openwrt/include/toplevel.mk:230: world] Błąd 2

Gdzie jeszcze popełniam błąd w tym pliku?

2022-06-19 14:49:30

Nigdy nie robiłem takiej łatki, dobrze rozumiem, że muszę utworzyć nowy plik np.
./target/linux/sunxi/patches-5.4/001-sunxi-h3-nanopi-neo-enable-usb-goldpin.patch

a w nim:

+&ohci1 {
+    status = "okay";
+};
+
+&ohci2 {
+    status = "okay";
+};

2022-06-19 14:20:11

To co zrobić, żeby te USB zaczęły działać? Miały być na obrazie FrendlyWRT te pliki, a ich tam nie ma

2022-06-19 14:17:29

Niestety, ale taki plik nie występuje na żadnej z trzech partycji FrendlyWRT.

Znalazłem coś w sieci na githubie:
https://github.com/armbian/sunxi-DT-ove … bhost0.dts

To chodzi o ten plik?

Wrzucić go do /boot/dtb-4.10.11-sun8i/overlay/ na moim kompilowanym obrazie?

2022-06-19 13:34:02

To gdzie je znajdę, bo w systemie nie mam takiego pliku:

root@OpenWRT:/# find / -name sun8i-h3-usbhost0*

2022-06-19 13:12:16

FrendlyWRT - usb na goldpinach działa

Ja nie mam takich plików w komilatorze:

# find ./ -name sun8i-h3-usbhost0.dtbo

W systemie na pierwszej oraz drugiej partycji również nie mam katalogu /boot

Czy to wina, że nie jestem na gałęzi master?

2022-06-19 12:14:25

Hmmm, ale ja nie mam taki plików, o których mówisz w kompilatorze:

# find ./ -name "sun8i-h3-nanopi-neo.dtsi"
# find ./ -name "sunix-h3-h5.dtsi"

Tak, coś tam udostępnia na moją płytkę, ale jeszcze tego nie sprawdzałem:
https://drive.google.com/drive/folders/ … 6ve4aXirGt

2022-06-19 12:05:27

Tak to wygląda:

# find ./ -name *nano*pi*neo*dts
./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/rk3399-nanopi-neo4.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/rk3399-nanopi-neo4.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/rk3399-nanopi-neo4.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts

Podejrzewam, że masz na myśli któryś z tych plików, w sumie wszystkie są chyba takie same:

./build_dir/toolchain-arm_cortex-a7+neon-vfpv4_gcc-8.4.0_musl_eabi/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-nanopi_neo/u-boot-2020.04/arch/arm/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts
./build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-sunxi_cortexa7/linux-5.4.188/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts

./build_dir/host/u-boot-2021.01/arch/arm/dts/sun8i-h3-nanopi-neo.dts
https://github.com/ARM-software/u-boot/ … pi-neo.dts

Jak można włączyć te dwa dodatkowe USB?

2022-06-19 10:53:25

No dobrze, to chyba wykonam to jak poprzednio z ręcznymi zmianami w pliku.
Dziękuję za Twoją dotychczasową pomoc.

NanoPi NEO ma 3 usb: pierwsze na fizycznym gnieździe, pozostałe dwa na goldpinach.
W przypadku tych ostatnich dwóch nie działają w OpenWRT. Nagrałem na chwilę Debiana, aby sprawdzić czy to może uszkodzona płyta, ale na Debianie one działają.
Czy wiesz dlaczego tak jest? Może przy okazji kompilacji systemu mógłbym zrobić jakieś zmiany, aby te dwa dodatkowe USB na goldpinach zaczęły działać?

2022-06-19 00:39:42

Coś takiego wyszło:
https://www35.zippyshare.com/v/rlg17RGy/file.html

Chyba znowu to samo?

2022-06-17 23:06:30

Cezary napisał/a:

Jeszcze wyżej, etap budowania biinarki.

Tutaj całość wysłana do pliku: make V=s -j1 >> compile.txt
https://www108.zippyshare.com/v/KlcqJ2WS/file.html

2022-06-17 21:16:36

Z powyższego linka rozwiązanie działa ;-)

root@OpenWRT:~# ffmpeg -y -rtsp_transport tcp -i "rtsp://-1:-1@192.168.203.21/stream1" -vframes 1 output.jpg
ffmpeg version 4.3.3 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)
  configuration: --enable-cross-compile --cross-prefix=arm-openwrt-linux-muslgnueabi- --arch=arm --cpu=cortex-a7 --target-os=linux --prefix=/usr --pkg-config=pkg-config --enable-shared --enable-static --enable-pthreads --enable-zlib --disable-doc --disable-debug --disable-lzma --disable-vaapi --disable-vdpau --disable-outdevs --enable-libx264 --enable-gpl --enable-nonfree --disable-runtime-cpudetect --enable-lto --enable-vfp --enable-neon --enable-vfp --disable-x86asm --enable-gnutls --enable-small --enable-libmp3lame --enable-gpl --enable-libx264
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
Guessed Channel Layout for Input Stream #0.1 : mono
Input #0, rtsp, from 'rtsp://-1:-1@192.168.203.21/stream1':
  Metadata:
    title           : stream server
    comment         : stream1
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #0:0: Video: h264, yuvj420p(pc, progressive), 1920x1080, 10 fps, 10 tbr, 90k tbn, 180k tbc
    Stream #0:1: Audio: pcm_mulaw, 8000 Hz, mono, s16, 64 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> mjpeg (native))
Press [q] to stop, [?] for help
Output #0, image2, to 'output.jpg':
  Metadata:
    title           : stream server
    comment         : stream1
    encoder         : Lavf58.45.100
    Stream #0:0: Video: mjpeg, yuvj420p(pc), 1920x1080, q=2-31, 200 kb/s, 10 fps, 10 tbn, 10 tbc
    Metadata:
      encoder         : Lavc58.91.100 mjpeg
    Side data:
      cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: N/A
frame=    1 fps=0.0 q=8.9 Lsize=N/A time=00:00:00.10 bitrate=N/A speed=0.214x
video:133kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown

Teraz jeszcze odznaczę ffmpeg i pozaznaczam ffmpeg-custom ;-)

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 4 z 25)

Znalezione posty: 76 do 100 z 603

76 Odpowiedź przez tinware 2022-07-01 12:27:13

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

77 Odpowiedź przez tinware 2022-07-01 12:21:36

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

78 Odpowiedź przez tinware 2022-07-01 11:44:46

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

79 Odpowiedź przez tinware 2022-07-01 11:39:38

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

80 Odpowiedź przez tinware 2022-07-01 11:22:27

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

81 Odpowiedź przez tinware 2022-07-01 11:16:29

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

82 Odpowiedź przez tinware 2022-07-01 10:53:19

Odp: Rpi b + MT7612U Netgear A6210 (74 odpowiedzi, napisanych Oprogramowanie / Software)

83 Odpowiedź przez tinware 2022-06-28 18:52:58

Odp: utworzenie partycji ntfs (3 odpowiedzi, napisanych Oprogramowanie / Software)

84 Odpowiedź przez tinware 2022-06-20 00:43:59

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

85 Odpowiedź przez tinware 2022-06-19 20:28:00

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

86 Odpowiedź przez tinware 2022-06-19 20:00:58

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

87 Odpowiedź przez tinware 2022-06-19 16:08:45

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

88 Odpowiedź przez tinware 2022-06-19 15:50:24

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

89 Odpowiedź przez tinware 2022-06-19 15:30:27

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

90 Odpowiedź przez tinware 2022-06-19 14:49:30

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

91 Odpowiedź przez tinware 2022-06-19 14:20:11

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

92 Odpowiedź przez tinware 2022-06-19 14:17:29

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

93 Odpowiedź przez tinware 2022-06-19 13:34:02

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

94 Odpowiedź przez tinware 2022-06-19 13:12:16

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

95 Odpowiedź przez tinware 2022-06-19 12:14:25

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

96 Odpowiedź przez tinware 2022-06-19 12:05:27

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

97 Odpowiedź przez tinware 2022-06-19 10:53:25

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

98 Odpowiedź przez tinware 2022-06-19 00:39:42

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

99 Odpowiedź przez tinware 2022-06-17 23:06:30

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

100 Odpowiedź przez tinware 2022-06-17 21:16:36

Odp: Screenshot ffmpeg (58 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 76 do 100 z 603