Mam już zainstalowany 11685 czy nie wystarczy podmienić samego bin 11702 w celu zmiany ?
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez roratoga
Mam już zainstalowany 11685 czy nie wystarczy podmienić samego bin 11702 w celu zmiany ?
Tu widzę jest 11702 w ipk.
Można sama binarne z tego wyciągnąć czy jest gdzieś sama?
Znajdę gdzieś sama binarne najnowszego oscama do netgeara 6220 ?
roratoga napisał/a:Czy zamiana netgeara 6220 na 6800 to krok do przodu czy zostać na tym 6220 ?
I jak tam zmieniłeś tego 6220 na coś innego?
Jeszcze nie jakoś nie moge trafić dobrej ceny
Tak r6800 netgear
Czy zamiana netgeara 6220 na 6800 to krok do przodu czy zostać na tym 6220 ?
Przed awaria tak właśnie miałem 21 przekierowany na 21 i działało. Po przestało dlatego zrobiłem 21 na 22222. Jutro zrobię jeszcze raz 21 na 21 i wkleję wynik.
Edit
Dziwna sprawa
Ponownie port 21 zaczął działać :-)
Tak miałem do tej pory i na porcie 21 mogłem się łączyć, po tej awari najpierw zainstalowałem od nowa openwrt nic to nie dało potem zmieniłem na gargoyle i także nic, dopiero spróbowałem przekierować port 21 na ten 22222 i dopiero zadziałało. Gdy usune to przekierowanie nie mogę się połączyć.
no tak ale wczesniej mialem 21 i dzialalo a teraz nie dziala bez tego przekierowania
cos takiego mam
iptables -v -L -t nat
Chain PREROUTING (policy ACCEPT 8927 packets, 1488K bytes)
pkts bytes target prot opt in out source destination
9210 1502K prerouting_rule all -- any any anywhere anywhere /* !fw3: Custom prerouting rule chain */
6746 1356K zone_lan_prerouting all -- br-lan any anywhere anywhere /* !fw3 */
2464 146K zone_wan_prerouting all -- eth0.2 any anywhere anywhere /* !fw3 */
Chain INPUT (policy ACCEPT 2657 packets, 191K bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 1990 packets, 140K bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 115 packets, 9083 bytes)
pkts bytes target prot opt in out source destination
4664 355K postrouting_rule all -- any any anywhere anywhere /* !fw3: Custom postrouting rule chain */
115 9083 zone_lan_postrouting all -- any br-lan anywhere anywhere /* !fw3 */
4549 345K zone_wan_postrouting all -- any eth0.2 anywhere anywhere /* !fw3 */
Chain postrouting_lan_rule (1 references)
pkts bytes target prot opt in out source destination
Chain postrouting_rule (1 references)
pkts bytes target prot opt in out source destination
Chain postrouting_wan_rule (1 references)
pkts bytes target prot opt in out source destination
Chain prerouting_lan_rule (1 references)
pkts bytes target prot opt in out source destination
Chain prerouting_rule (1 references)
pkts bytes target prot opt in out source destination
Chain prerouting_wan_rule (1 references)
pkts bytes target prot opt in out source destination
Chain zone_lan_postrouting (1 references)
pkts bytes target prot opt in out source destination
115 9083 postrouting_lan_rule all -- any any anywhere anywhere /* !fw3: Custom lan postrouting rule chain */
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:www /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:80 /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:8080 /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:8080 /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:ssh /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:ssh /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:https /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:https /* !fw3: Most (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 Duszek tcp dpt:www /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 Duszek udp dpt:80 /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 Duszek tcp dpt:8080 /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 Duszek udp dpt:8080 /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 Duszek tcp dpt:ssh /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 Duszek udp dpt:ssh /* !fw3: Router (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:9100 /* !fw3: HP (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:9100 /* !fw3: HP (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.2 tcp dpt:discard /* !fw3: WoL (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.2 udp dpt:discard /* !fw3: WoL (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 Maczek.lan tcp dpt:58015 /* !fw3: Torrenty (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 Maczek.lan udp dpt:58015 /* !fw3: Torrenty (reflection) */ to:10.0.1.1
0 0 SNAT tcp -- any any 10.0.1.0/24 10.0.1.20 tcp dpt:ftp /* !fw3: FTP (reflection) */ to:10.0.1.1
0 0 SNAT udp -- any any 10.0.1.0/24 10.0.1.20 udp dpt:21 /* !fw3: FTP (reflection) */ to:10.0.1.1
Chain zone_lan_prerouting (1 references)
pkts bytes target prot opt in out source destination
6746 1356K prerouting_lan_rule all -- any any anywhere anywhere /* !fw3: Custom lan prerouting rule chain */
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxx tcp dpt:81 /* !fw3: Most (reflection) */ to:10.0.1.20:80
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxx udp dpt:81 /* !fw3: Most (reflection) */ to:10.0.1.20:80
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:8081 /* !fw3: Most (reflection) */ to:10.0.1.20:8080
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxx udp dpt:8081 /* !fw3: Most (reflection) */ to:10.0.1.20:8080
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:22221 /* !fw3: Most (reflection) */ to:10.0.1.20:22
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:22221 /* !fw3: Most (reflection) */ to:10.0.1.20:22
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:444 /* !fw3: Most (reflection) */ to:10.0.1.20:443
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:444 /* !fw3: Most (reflection) */ to:10.0.1.20:443
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:www /* !fw3: Router (reflection) */ to:10.0.1.1:80
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:80 /* !fw3: Router (reflection) */ to:10.0.1.1:80
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:8080 /* !fw3: Router (reflection) */ to:10.0.1.1:8080
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:8080 /* !fw3: Router (reflection) */ to:10.0.1.1:8080
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:22223 /* !fw3: Router (reflection) */ to:10.0.1.1:22
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:22223 /* !fw3: Router (reflection) */ to:10.0.1.1:22
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxxx tcp dpt:9100 /* !fw3: HP (reflection) */ to:10.0.1.20:9100
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:9100 /* !fw3: HP (reflection) */ to:10.0.1.20:9100
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxxx tcp dpt:discard /* !fw3: WoL (reflection) */ to:10.0.1.2:9
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxxx udp dpt:discard /* !fw3: WoL (reflection) */ to:10.0.1.2:9
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxx tcp dpt:58015 /* !fw3: Torrenty (reflection) */ to:10.0.1.3:58015
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxx udp dpt:58015 /* !fw3: Torrenty (reflection) */ to:10.0.1.3:58015
0 0 DNAT tcp -- any any 10.0.1.0/24 94.xxxxxx tcp dpt:22222 /* !fw3: FTP (reflection) */ to:10.0.1.20:21
0 0 DNAT udp -- any any 10.0.1.0/24 94.xxxxxx udp dpt:22222 /* !fw3: FTP (reflection) */ to:10.0.1.20:21
Chain zone_wan_postrouting (1 references)
pkts bytes target prot opt in out source destination
4549 345K postrouting_wan_rule all -- any any anywhere anywhere /* !fw3: Custom wan postrouting rule chain */
4549 345K MASQUERADE all -- any any anywhere anywhere /* !fw3 */
Chain zone_wan_prerouting (1 references)
pkts bytes target prot opt in out source destination
6 320 CONNMARK tcp -- any any anywhere anywhere tcp dpt:22223 CONNMARK or 0x80
6 320 REDIRECT tcp -- any any anywhere anywhere tcp dpt:22223 redir ports 22
31 1552 REDIRECT tcp -- any any anywhere anywhere tcp dpt:https redir ports 443
40 2152 REDIRECT tcp -- any any anywhere anywhere tcp dpt:www redir ports 80
2387 142K prerouting_wan_rule all -- any any anywhere anywhere /* !fw3: Custom wan prerouting rule chain */
92 5280 DNAT tcp -- any any anywhere anywhere tcp dpt:81 /* !fw3: Most */ to:10.0.1.20:80
0 0 DNAT udp -- any any anywhere anywhere udp dpt:81 /* !fw3: Most */ to:10.0.1.20:80
1 44 DNAT tcp -- any any anywhere anywhere tcp dpt:8081 /* !fw3: Most */ to:10.0.1.20:8080
1 98 DNAT udp -- any any anywhere anywhere udp dpt:8081 /* !fw3: Most */ to:10.0.1.20:8080
1 52 DNAT tcp -- any any anywhere anywhere tcp dpt:22221 /* !fw3: Most */ to:10.0.1.20:22
0 0 DNAT udp -- any any anywhere anywhere udp dpt:22221 /* !fw3: Most */ to:10.0.1.20:22
2 96 DNAT tcp -- any any anywhere anywhere tcp dpt:444 /* !fw3: Most */ to:10.0.1.20:443
0 0 DNAT udp -- any any anywhere anywhere udp dpt:444 /* !fw3: Most */ to:10.0.1.20:443
0 0 DNAT tcp -- any any anywhere anywhere tcp dpt:www /* !fw3: Router */ to:10.0.1.1:80
0 0 DNAT udp -- any any anywhere anywhere udp dpt:80 /* !fw3: Router */ to:10.0.1.1:80
101 4140 DNAT tcp -- any any anywhere anywhere tcp dpt:8080 /* !fw3: Router */ to:10.0.1.1:8080
0 0 DNAT udp -- any any anywhere anywhere udp dpt:8080 /* !fw3: Router */ to:10.0.1.1:8080
0 0 DNAT tcp -- any any anywhere anywhere tcp dpt:22223 /* !fw3: Router */ to:10.0.1.1:22
0 0 DNAT udp -- any any anywhere anywhere udp dpt:22223 /* !fw3: Router */ to:10.0.1.1:22
1 40 DNAT tcp -- any any anywhere anywhere tcp dpt:9100 /* !fw3: HP */ to:10.0.1.20:9100
0 0 DNAT udp -- any any anywhere anywhere udp dpt:9100 /* !fw3: HP */ to:10.0.1.20:9100
1 40 DNAT tcp -- any any anywhere anywhere tcp dpt:discard /* !fw3: WoL */ to:10.0.1.2:9
0 0 DNAT udp -- any any anywhere anywhere udp dpt:discard /* !fw3: WoL */ to:10.0.1.2:9
0 0 DNAT tcp -- any any anywhere anywhere tcp dpt:58015 /* !fw3: Torrenty */ to:10.0.1.3:58015
0 0 DNAT udp -- any any anywhere anywhere udp dpt:58015 /* !fw3: Torrenty */ to:10.0.1.3:58015
6 352 DNAT tcp -- any any anywhere anywhere tcp dpt:22222 /* !fw3: FTP */ to:10.0.1.20:21
0 0 DNAT udp -- any any anywhere anywhere udp dpt:22222 /* !fw3: FTP */ to:10.0.1.20:21
Tak jeśli zaczyna się od 94
Czy całodniowa awaria prądu mogła spowodować ze router sam z siebie zablokował port 21 czy to dostawca internetu zrobił ? Wychodzi na to ze mimo publicznego IP mam zablokowany port 21 dlatego nie mogę połączyć się z dyskiem spoza sieci
Ma ktoś jeszcze i może udostępnić poprzednia wersje (wcześniejsza od tej która jest dostępna w wyszukiwarce) openwrt z luci dla netgear r6220 ?
Coś się musiało zmienić skoro kodi nie może połączyć się z dyskiem. Port 21 raczej jest odblokowany bo inaczej w aplikacji tez nie byłoby połączenia
Nic nie doinstalowywalem związanego z ftp ponieważ ten dysk jest na drugim routerze Przed awaria wszystko było ok. Dostęp do routerów z zewnątrz zarówno przez www jak i SSH działa poprawnie.
Czy w twoim najnowszym obrazie dla routera 6220 coś się zmieniło w dostępie do FTP?
Mam taki problem ze po wgraniu na nowo systemu i poustawianie wszystkiego na nowo ręcznie nie z kopi (przekierowania portów w zaporze) nie mogę z zewnątrz sieci dostać się do dysku. Np w kodi miałem dodane źródło z mojego dysku i teraz brak połączenia a w aplikacji na telefonie muszę przestawić opcje transfer mode z passiv na active i dopiero mogę się połączyć.
Witam
Netgear 6220 i openwrt 21.02 przy próbie aktualizacji dowolnego pakietu mam coś takiego
Collected errors:
* wfopen: //usr/lib/opkg/info/luci-mod-network.control: Read-only file system.
* wfopen: //usr/lib/opkg/info/luci-mod-network.postinst: Read-only file system.
* wfopen: //usr/lib/opkg/info/luci-mod-network.postinst-pkg: Read-only file system.
* wfopen: //usr/lib/opkg/info/luci-mod-network.prerm: Read-only file system.
* wfopen: /etc/uci-defaults/50_luci-mod-admin-full: Read-only file system.
* wfopen: /usr/libexec/luci-peeraddr: Read-only file system.
* wfopen: /usr/share/luci/menu.d/luci-mod-network.json: Read-only file system.
* wfopen: /usr/share/rpcd/acl.d/luci-mod-network.json: Read-only file system.
* wfopen: /www/luci-static/resources/tools/network.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/dhcp.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/diagnostics.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/hosts.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/interfaces.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/routes.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/switch.js: Read-only file system.
* wfopen: /www/luci-static/resources/view/network/wireless.js: Read-only file system.
* pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-mod-network.list: Read-only file system.
* opkg_install_pkg: Failed to extract data files for luci-mod-network. Package debris may remain!
* opkg_install_cmd: Cannot install package luci-mod-network.
* pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-mod-network.list: Read-only file system.
Mogę coś jeszcze zrobić czy czeka mnie ponowna instalacja i konfiguracja >?
a jesli dopisze tylko to do skryptu
killall wget -q http://redir.atmcdn.pl/sc/o2/Eurozet/live/me
zamiast
killall wget
będzie lepiej ?
działa
dopisałem jeszcze do scryptu zeby ubijał ten wget
dałem ps żeby sprawdzić i zobaczyłem jeszcze to
9602 root 3692 S wget -q http://redir.atmcdn.pl/sc/o2/Eurozet/live/me
9638 root 3692 S wget -q http://redir.atmcdn.pl/sc/o2/Eurozet/live/me
czy ten skrypt nie powinien też tego wyłączać ?
/:)
Dopisałem na końcu fi
i zadziałało
DZIĘKI
root@Duszek:~# ACTION=pressed BUTTON=wps sh -x /etc/hotplug.d/button/80-radio
/etc/hotplug.d/button/80-radio: line 11: syntax error: unexpected end of file (expecting "fi")
Po podmianie radio już wcale nie działa. Nie chce sie załączyć.
/bin/player.sh & radio gra
pidof player.sh radio gra
pidof /bin/player.sh radio gra
root@Duszek:~# killall player.sh
killall: player.sh: no process killed radio gra
root@Duszek:~# killall /bin/player.sh
killall: /bin/player.sh: no process killed radio dalej gra
I tak nie wiem jak mam sprawdzić te pidof i kill
Sam sobie nie poradzę
Może ktoś kiedyś znajdzie czas.
pzdr
eko.one.pl → Posty przez roratoga
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc