nie jestem w stanie wejśc do routera jak jest ustawiony jako repeater. Sieci WiFi nie rozgłasza mimo że świeci dioda wifi a wpisując adres w przeglądarke nie łączy mi się po kablu
Strony Poprzednia 1 2 3 Następna
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 2 z 3)
eko.one.pl → Posty przez gracus7
Znalezione posty: 26 do 50 z 53
26 2024-03-12 22:48:35
Odp: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
27 2024-03-12 22:09:46
Odp: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
at Nov 25 19:19:24 2023 kern.notice kernel: [ 0.000000] Linux version 5.10.201 (cezary@eko.one.pl) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20265-f85a79bcb4) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sat Nov 25 18:18:57 2023
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] printk: bootconsole [early0] enabled
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-WDR3600 v1
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 2
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Zone ranges:
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Movable zone start for each node
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Early memory node ranges
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] Memory: 122000K/131072K available (5154K kernel code, 584K rwdata, 696K rodata, 1236K init, 195K bss, 9072K reserved, 0K cma-reserved)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] NR_IRQS: 51
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] CPU clock: 560.000 MHz
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.008372] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.084994] pid_max: default: 32768 minimum: 301
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.090051] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.097846] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.107807] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.118840] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.129348] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.136629] pinctrl core: initialized pinctrl subsystem
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.143785] NET: Registered protocol family 16
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.199981] clocksource: Switched to clocksource MIPS
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.206593] NET: Registered protocol family 2
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.211554] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.219922] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.228893] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.237082] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.244607] TCP: Hash tables configured (established 1024 bind 1024)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.251500] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.258475] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.266200] NET: Registered protocol family 1
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.270922] PCI: CLS 0 bytes, default 32
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.280938] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.291411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.297619] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.312118] pinctrl-single 1804002c.pinmux: 544 pins, size 68
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.319054] gpio-export gpio-export: 4 gpio(s) exported
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.325512] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.333072] printk: console [ttyS0] disabled
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.337701] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.346938] printk: console [ttyS0] enabled
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.355846] printk: bootconsole [early0] disabled
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.377629] spi-nor spi0.0: en25q64 (8192 Kbytes)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.382533] 3 fixed-partitions partitions found on MTD device spi0.0
Sat Nov 25 19:19:24 2023 kern.err kernel: [ 0.389029] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
Sat Nov 25 19:19:24 2023 kern.err kernel: [ 0.395795] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
Sat Nov 25 19:19:24 2023 kern.err kernel: [ 0.403553] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
Sat Nov 25 19:19:24 2023 kern.err kernel: [ 0.410360] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.417338] Creating 3 MTD partitions on "spi0.0":
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.422248] 0x000000000000-0x000000020000 : "u-boot"
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.432350] 0x000000020000-0x0000007f0000 : "firmware"
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.438853] 2 tplink-fw partitions found on MTD device firmware
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.444937] Creating 2 MTD partitions on "firmware":
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.449997] 0x000000000000-0x0000001eb5a1 : "kernel"
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 0.455035] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.465743] 0x0000001eb5a4-0x0000007d0000 : "rootfs"
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 0.470845] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.481103] mtd: setting mtd3 (rootfs) as root device
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.487034] 1 squashfs-split partitions found on MTD device rootfs
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.493372] 0x000000730000-0x0000007d0000 : "rootfs_data"
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 0.499786] 0x0000007f0000-0x000000800000 : "art"
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 0.885693] switch0: Atheros AR8327 rev. 2 switch registered on mdio.0
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.540140] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.551298] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.558103] i2c /dev entries driver
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.564111] NET: Registered protocol family 10
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.577017] Segment Routing with IPv6
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.580935] NET: Registered protocol family 17
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.585514] 8021q: 802.1Q VLAN Support v1.8
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.590897] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.597122] MEM 0x0000000010000000..0x0000000013ffffff
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.602478] IO 0x0000000000000000..0x0000000000000000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.607993] PCI host bridge to bus 0000:00
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.612202] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.619181] pci_bus 0000:00: root bus resource [io 0x0000]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.624857] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.631759] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.639855] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.646003] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.652952] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.659826] pci 0000:00:00.0: supports D1
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.663909] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.671274] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.678014] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.685488] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.706796] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.719719] Freeing unused kernel memory: 1236K
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 1.724363] This architecture does not have kernel memory protection.
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 1.730916] Run /sbin/init as init process
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 1.735071] with arguments:
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 1.735076] /sbin/init
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 1.735082] with environment:
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 1.735087] HOME=/
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 1.735092] TERM=linux
Sat Nov 25 19:19:24 2023 user.info kernel: [ 3.807511] init: Console is alive
Sat Nov 25 19:19:24 2023 user.info kernel: [ 3.811506] init: - watchdog -
Sat Nov 25 19:19:24 2023 user.info kernel: [ 7.480578] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.092315] usbcore: registered new interface driver usbfs
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.097946] usbcore: registered new interface driver hub
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.103476] usbcore: registered new device driver usb
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.177333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 8.193948] SCSI subsystem initialized
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.204634] fsl-ehci: Freescale EHCI Host controller driver
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.213515] ehci-platform: EHCI generic platform driver
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.219215] ehci-platform 1b000000.usb: EHCI Host Controller
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.225040] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.233126] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.260009] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.267213] hub 1-0:1.0: USB hub found
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.271853] hub 1-0:1.0: 1 port detected
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.286514] usbcore: registered new interface driver usb-storage
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.295747] usbcore: registered new interface driver uas
Sat Nov 25 19:19:24 2023 user.info kernel: [ 8.302566] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sat Nov 25 19:19:24 2023 user.info kernel: [ 8.320418] init: - preinit -
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 8.570149] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 9.195114] random: procd: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 9.202109] hub 1-1:1.0: USB hub found
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 9.210275] hub 1-1:1.0: 4 ports detected
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 9.768801] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 9.964205] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 10.215789] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 10.292634] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 10.426953] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 13.405786] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 13.413788] eth0: link up (1000Mbps/Full duplex)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 13.430075] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 13.436877] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Sat Nov 25 19:19:24 2023 user.info kernel: [ 18.077684] mount_root: loading kmods from internal overlay
Sat Nov 25 19:19:24 2023 user.info kernel: [ 18.166346] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sat Nov 25 19:19:24 2023 user.info kernel: [ 18.180364] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 19.714983] jffs2: notice: (527) jffs2_build_xattr_subsystem: complete building xattr subsystem, 63 of xdatum (0 unchecked, 63 orphan) and 81 of xref (12 dead, 69 orphan) found.
Sat Nov 25 19:19:24 2023 user.info kernel: [ 19.731787] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 19.739220] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 19.746445] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 19.753382] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 19.760596] block: attempting to load /etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 19.770568] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.err kernel: [ 19.777707] block: no usable configuration
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 19.850581] jffs2: notice: (525) jffs2_build_xattr_subsystem: complete building xattr subsystem, 63 of xdatum (0 unchecked, 63 orphan) and 81 of xref (12 dead, 69 orphan) found.
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.236443] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 20.243920] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.251152] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 20.258019] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.265238] block: attempting to load /etc/config/fstab
Sat Nov 25 19:19:24 2023 user.err kernel: [ 20.271010] block: unable to load configuration (fstab: Entry not found)
Sat Nov 25 19:19:24 2023 user.err kernel: [ 20.278133] block: no usable configuration
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.284279] mount_root: overlay filesystem has not been fully initialized yet
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.293096] mount_root: switching to jffs2 overlay
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 20.313083] overlayfs: upper fs does not support tmpfile.
Sat Nov 25 19:19:24 2023 user.warn kernel: [ 20.324751] urandom-seed: Seed file not found (/etc/urandom.seed)
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 20.364856] eth0: link down
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.388901] procd: - early -
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.392785] procd: - watchdog -
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.988504] procd: - watchdog -
Sat Nov 25 19:19:24 2023 user.info kernel: [ 20.997796] procd: - ubus -
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 21.622460] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 21.631459] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 21.646181] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 21.656675] procd: - init -
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 23.058179] random: jshn: uninitialized urandom read (4 bytes read)
Sat Nov 25 19:19:24 2023 user.info kernel: [ 24.230868] kmodloader: loading kernel modules from /etc/modules.d/*
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 24.856647] tun: Universal TUN/TAP device driver, 1.6
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.085079] GACT probability on
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.101576] Mirror/redirect action on
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.133772] u32 classifier
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.136536] input device check on
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.140308] Actions configured
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.194347] Simple TC action Loaded
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.319889] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.327632] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 25.907282] xt_time: kernel timezone is -0000
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.115576] PPP generic driver version 2.4.2
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.131701] NET: Registered protocol family 24
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.145770] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.153775] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364485] ath: EEPROM regdomain: 0x0
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364499] ath: EEPROM indicates default country code should be used
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364505] ath: doing EEPROM country->regdmn map search
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364522] ath: country maps to regdmn code: 0x3a
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364531] ath: Country alpha2 being used: US
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.364537] ath: Regpair used: 0x3a
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 26.377608] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.379748] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 26.387037] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 26.397384] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
Sat Nov 25 19:19:24 2023 kern.warn kernel: [ 26.407688] ath9k 0000:00:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:00.0.bin
Sat Nov 25 19:19:24 2023 user.info kernel: [ 27.573580] urngd: v1.0.2 started.
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 29.817934] random: crng init done
Sat Nov 25 19:19:24 2023 kern.notice kernel: [ 29.821473] random: 23 urandom warning(s) missed due to ratelimiting
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871075] ath: EEPROM regdomain: 0x0
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871089] ath: EEPROM indicates default country code should be used
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871095] ath: doing EEPROM country->regdmn map search
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871112] ath: country maps to regdmn code: 0x3a
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871120] ath: Country alpha2 being used: US
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.871126] ath: Regpair used: 0x3a
Sat Nov 25 19:19:24 2023 kern.debug kernel: [ 30.881294] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Sat Nov 25 19:19:24 2023 kern.info kernel: [ 30.883606] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=14
Sat Nov 25 19:19:24 2023 user.info kernel: [ 30.920715] kmodloader: done loading kernel modules from /etc/modules.d/*
Sat Nov 25 19:19:24 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf
Sat Nov 25 19:19:26 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Nov 25 19:19:26 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: started, version 2.86 cachesize 150
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: DNS service limited to local subnets
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: UBus support enabled: connected to system bus
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 178.32.31.41#53 for domain bit
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 78.47.86.43#53 for domain bit
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain glue
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain glue
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain glue
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain parody
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain parody
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain parody
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain dyn
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain dyn
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain dyn
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain bbs
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain bbs
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain bbs
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain free
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain free
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain free
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain fur
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain fur
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain fur
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain geek
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain geek
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain geek
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain gopher
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain gopher
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain gopher
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain indy
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.211.32.162#53 for domain indy
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 95.142.171.235#53 for domain indy
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using nameserver 66.244.95.20#53 for domain ing
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for test
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for onion
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for localhost
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for local
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for invalid
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for bind
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: using only locally-known addresses for lan
Sat Nov 25 19:19:28 2023 daemon.warn dnsmasq[3234]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: read /etc/hosts - 4 addresses
Sat Nov 25 19:19:28 2023 daemon.info dnsmasq[3234]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Nov 25 19:19:42 2023 authpriv.info dropbear[3302]: Not backgrounding
Sat Nov 25 19:19:51 2023 daemon.notice wpa_supplicant[3462]: Successfully initialized wpa_supplicant
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: bonding
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: 8021ad
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: 8021q
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: macvlan
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: veth
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: bridge
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: Network device
Sat Nov 25 19:19:53 2023 user.notice : Added device handler type: tunnel
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.344181] eth0: link up (1000Mbps/Full duplex)
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.348897] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.373549] br-lan: port 1(eth0.1) entered blocking state
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.379040] br-lan: port 1(eth0.1) entered disabled state
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.385018] device eth0.1 entered promiscuous mode
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.389887] device eth0 entered promiscuous mode
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.419511] br-lan: port 1(eth0.1) entered blocking state
Sat Nov 25 19:20:00 2023 kern.info kernel: [ 86.425049] br-lan: port 1(eth0.1) entered forwarding state
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'lan' is enabled
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'lan' is setting up now
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'lan' is now up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: bridge 'br-lan' link is up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Nov 25 19:20:00 2023 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'loopback' is enabled
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'loopback' is now up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan' is enabled
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan6' is enabled
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Network device 'eth0' link is up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Network device 'lo' link is up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Nov 25 19:20:00 2023 daemon.notice netifd: VLAN 'eth0.2' link is up
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan' has link connectivity
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan' is setting up now
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan6' has link connectivity
Sat Nov 25 19:20:00 2023 daemon.notice netifd: Interface 'wan6' is setting up now
Sat Nov 25 19:20:01 2023 kern.info kernel: [ 87.390445] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Nov 25 19:20:01 2023 daemon.err odhcpd[3622]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sat Nov 25 19:20:01 2023 daemon.notice netifd: wan (3772): udhcpc: started, v1.35.0
Sat Nov 25 19:20:02 2023 daemon.err odhcp6c[3780]: Failed to send RS (Address not available)
Sat Nov 25 19:20:02 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Nov 25 19:20:02 2023 daemon.notice netifd: wan (3772): udhcpc: broadcasting discover
Sat Nov 25 19:20:03 2023 daemon.err odhcp6c[3780]: Failed to send SOLICIT message to ff02::1:2 (Operation not permitted)
Sat Nov 25 19:20:05 2023 daemon.notice netifd: wan (3772): udhcpc: broadcasting discover
Sat Nov 25 19:20:07 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.099516] br-lan: port 2(wlan0) entered blocking state
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.104969] br-lan: port 2(wlan0) entered disabled state
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.110744] device wlan0 entered promiscuous mode
Sat Nov 25 19:20:08 2023 daemon.notice netifd: wan (3772): udhcpc: broadcasting discover
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.619276] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.625990] br-lan: port 2(wlan0) entered blocking state
Sat Nov 25 19:20:08 2023 kern.info kernel: [ 94.631424] br-lan: port 2(wlan0) entered forwarding state
Sat Nov 25 19:20:12 2023 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Nov 25 19:20:12 2023 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Nov 25 19:20:12 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.192937] br-lan: port 3(wlan1) entered blocking state
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.198345] br-lan: port 3(wlan1) entered disabled state
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.204190] device wlan1 entered promiscuous mode
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.444760] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.451500] br-lan: port 3(wlan1) entered blocking state
Sat Nov 25 19:20:12 2023 kern.info kernel: [ 98.456916] br-lan: port 3(wlan1) entered forwarding state
Sat Nov 25 19:20:12 2023 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Nov 25 19:20:12 2023 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Nov 25 19:20:13 2023 daemon.notice netifd: Wireless device 'radio0' is now up
Sat Nov 25 19:20:13 2023 daemon.notice netifd: Network device 'wlan0' link is up
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[3234]: exiting on receipt of SIGTERM
Sat Nov 25 19:20:14 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Nov 25 19:20:14 2023 daemon.notice netifd: Network device 'wlan1' link is up
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: started, version 2.86 cachesize 150
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: DNS service limited to local subnets
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: UBus support enabled: connected to system bus
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq-dhcp[4509]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 178.32.31.41#53 for domain bit
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 78.47.86.43#53 for domain bit
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain glue
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain glue
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain glue
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain parody
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain parody
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain parody
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain dyn
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain dyn
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain dyn
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain bbs
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain bbs
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain bbs
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain free
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain free
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain free
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain fur
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain fur
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain fur
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain geek
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain geek
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain geek
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain gopher
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain gopher
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain gopher
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain indy
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.211.32.162#53 for domain indy
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 95.142.171.235#53 for domain indy
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using nameserver 66.244.95.20#53 for domain ing
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for test
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for onion
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for localhost
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for local
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for invalid
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for bind
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: using only locally-known addresses for lan
Sat Nov 25 19:20:14 2023 daemon.warn dnsmasq[4509]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: read /etc/hosts - 5 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq-dhcp[4509]: read /etc/ethers - 0 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: read /etc/hosts - 5 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq-dhcp[4509]: read /etc/ethers - 0 addresses
Sat Nov 25 19:20:14 2023 daemon.info dnsmasq[4509]: exiting on receipt of SIGTERM
Sat Nov 25 19:20:17 2023 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: ERROR: No valid dynamic DNS service configurations defined
Sat Nov 25 19:20:17 2023 daemon.notice procd: /etc/rc.d/S90ddns_gargoyle: (Did you specify correct configuration file path?)
Sat Nov 25 19:20:19 2023 daemon.info procd: - init complete -
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: started, version 2.86 cachesize 150
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: DNS service limited to local subnets
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: UBus support enabled: connected to system bus
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq-dhcp[4908]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 178.32.31.41#53 for domain bit
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 78.47.86.43#53 for domain bit
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain glue
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain glue
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain glue
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain parody
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain parody
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain parody
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain dyn
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain dyn
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain dyn
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain bbs
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain bbs
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain bbs
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain free
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain free
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain free
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain fur
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain fur
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain fur
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain geek
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain geek
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain geek
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain gopher
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain gopher
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain gopher
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain indy
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.211.32.162#53 for domain indy
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 95.142.171.235#53 for domain indy
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using nameserver 66.244.95.20#53 for domain ing
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for test
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for onion
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for localhost
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for local
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for invalid
Sat Nov 25 19:20:21 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for bind
Sat Nov 25 19:20:22 2023 daemon.info dnsmasq[4908]: using only locally-known addresses for lan
Sat Nov 25 19:20:22 2023 daemon.warn dnsmasq[4908]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Nov 25 19:20:22 2023 daemon.info dnsmasq[4908]: read /etc/hosts - 5 addresses
Sat Nov 25 19:20:22 2023 daemon.info dnsmasq[4908]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Nov 25 19:20:22 2023 daemon.info dnsmasq[4908]: read /tmp/hosts/odhcpd - 1 addresses
Sat Nov 25 19:20:22 2023 daemon.info dnsmasq-dhcp[4908]: read /etc/ethers - 0 addresses
Sat Nov 25 19:20:22 2023 daemon.info urandom_seed[4846]: Seed saved (/etc/urandom.seed)
Sat Nov 25 19:20:42 2023 kern.info kernel: [ 128.430787] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is down
Sat Nov 25 19:20:46 2023 kern.info kernel: [ 132.590506] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
Sat Nov 25 19:20:49 2023 daemon.info dnsmasq-dhcp[4908]: DHCPDISCOVER(br-lan) 3c:97:0e:5e:8a:65
Sat Nov 25 19:20:49 2023 daemon.info dnsmasq-dhcp[4908]: DHCPOFFER(br-lan) 192.168.1.106 3c:97:0e:5e:8a:65
Sat Nov 25 19:20:49 2023 daemon.info dnsmasq-dhcp[4908]: DHCPREQUEST(br-lan) 192.168.1.106 3c:97:0e:5e:8a:65
Sat Nov 25 19:20:49 2023 daemon.info dnsmasq-dhcp[4908]: DHCPACK(br-lan) 192.168.1.106 3c:97:0e:5e:8a:65 DESKTOP-JJ392AA
Success
28 2024-03-12 20:53:38
Odp: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
No właśnie w tym problem że cały czas na kablu się z nim łączę i jak zmienię na AP i wpisuje pózniej w chrome adres 192.168.1.222 jaki ustawiłem na lanie to nie ma szans aby się z nim połączyć
29 2024-03-12 20:21:13
Odp: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
Witaj Cezary, tylko jak mam to sprawdzić kiedy router działa prawidłowo a gdy przestawie go na most bezprzewodowy to nie mam z nim kotaktu. Musze zrobić reset i wtedy znów jest z nim łączność jako routerem
30 2024-03-12 19:17:58
Odp: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
wróciłem do TPLinka ale tam nie na funkcji mostu bezprzewodowego. Sam router działa prawidłowo w 2,4 i 5 GHZ . ponownie zainstalowałem Gargoyle 1.14.0.3 i również obie sieci działają prawidłowo a gdy przełączę na most bezprzewodowy i zrobię te same ustawienia jak wcześniej na których działało miesiąc czasu to dioda wifi mruga ale żadne urządzenie nie widzi jego sieci. A także po przełączeniu się routera na AP nie można się do niego zalogować. W czym może być problem, w routerze czy oprogramowaniu?
31 2024-03-10 19:16:32
Temat: TP Link WDR3600 nie działa jako AP (51 odpowiedzi, napisanych Sprzęt / Hardware)
Witam. Miesiąc temu kupiłem router WDR3600 zainstalowałem mu gargoyle 1.14.0.3 i ustawiłem jako most bezprzewodowy. Działał prawidłowo do wczoraj. Okazało się że po mimo tego, że dioda od wifi mruga nie rozgłasza on sieci bo nigdzie go nie widać. przeinstalowałem Gargoyle jeszcze raz i okazało się, że nadal jest ten sam problem, natomiast jak go zresetuję i jest on w trybie routera to widać obie sieci 2,4 i 5 Ghz, podłączony pod siec bez problemu działa. Jak przestawie go w AP, zrobię ustawienia i zapisuję i juz nie można się do niego zalogować. Udało mi sie to zrobić ze 2 razy na 30 resetów. wszystkie ustawienia poprawne jak wcześniej a jego sieci nie ma po mimo mrugającej diody Wifi. Tak się zastanawiałem czy to nie problem fizyczny bo wczoraj rano miałem zanik zasilania w domu, ale skoro w trybie routera nadaje w obu sieciach to radia są sprawne.
32 2024-02-11 20:59:05
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Dziękuję jeszcze raz za wsparcie i pomoc. Pozdrawiam
33 2024-02-11 19:15:27
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
to jakie szyfrowanie najlepiej ustawić aby wszystko dobrze się łączyło? i jeszcze jedno pytanie o ile masz taką wiedzę. Czy routery we francji będą miały podobne ip jak nasze czy można spodziewać się jakiegoś problemu? bo w czerwcu będę tam jechał i chcę zamontować ten router koledze i zastanawiam się czy nie będzie niespodzianki a na żadne informacje od kolegi nie moge liczyć bo on ledwo smartfon używa 
. Chcę kupić jeszcze antenę zewnętrzną i minimum 10m przewodu
34 2024-02-11 19:02:26
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Mam jeden stary router tl wr740N do monitoringu i na nim też szyfrowanie jest ustawione na WPA2 i wszystko działa i laptop i telefon. Obecny router który rozgryzam wdr3600 podłączony do sieci kolegi w celach testowych z uwagi na odległość między budynkami miał problem. okazało sie że sieć jego routera szyfruje jako WPA3 sae i wtedy łączył się tylko smartfon a telewizor i laptop nie. Połączyłem się z moją siecią która ma szyfrowanie jako WPA2 i wszystko działa. Ale przy zabawie z połączeniem do sieci sąsiada nagle jego wifi miało szyfrowanie WPA2 ale czasem się to zmienia na WPA3 SAE czy to normalne?
35 2024-02-09 23:44:49
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
am jeszcze jedno pytanie. telefon łapie wifi o maksymalnym zasięgu , natomiast laptop po kablu ma internet ale wifi nie ma. jak rozwijam liste dostępnych sieci widzę gargoyla z max silą ale jak chce zalogować się na niego to odrazu traci siłę sygnału tak jak by próbował połaczyć się z siecią do której podłączony jest router a nie do niego. TV też widzi max zasięg ale połaczyć się nie chce
36 2024-02-09 23:07:07
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Poszło. Przeinstalowałem jeszcze raz wprowadziłem dane i poszło SUKCES 
Dziękuję za cierpliwość i pomoc. WIELKIE DZIĘKI
37 2024-02-09 22:52:58
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
upss przepraszam ale nie znam się na tym temacie więc dlatego szukam tutaj pomocy. A czy ten obraz sysupgrade mogę zrobić jak wcześniej jak aktualizację? bo coś czytałem ze to inaczej się robi
38 2024-02-09 22:46:44
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
teraz przy instalacji pokazuje mi się okno że program niezgodny z urządzeniem
https://postimg.cc/WDy8mbFT
39 2024-02-09 22:30:13
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
miałeś rację wylogowałem się i zalogowałem i faktycznie tłumacz przetłumaczył okno
40 2024-02-09 22:29:00
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
a może faktycznie tłumacz się włącza w takiej sytuacji
41 2024-02-09 22:27:22
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Po zalogowaniu miałem wszystko po angielsku a dopiero po chwili zmienia sam na polski
42 2024-02-09 22:25:58
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Gargulec
Wersja gargulca:1.14.0
Model:TP-Link TL-WDR3600 v1
43 2024-02-09 22:19:15
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
44 2024-02-09 22:02:15
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
basic.js?1.14.0:1 Uncaught TypeError: Cannot read properties of undefined (reading 'trim')
at getSelectedWifiChannels (basic.js?1.14.0:1:76735)
at saveChanges (basic.js?1.14.0:1:1989)
at HTMLButtonElement.onclick (basic.sh:1711:82)
45 2024-02-09 21:57:51
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
przepraszam ale nie za bardzo rozumiem o jaką konsolę js chodzi?
46 2024-02-09 21:56:40
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
jak ustawię most, nie wprowadzę żadnych danych i chcę zapisać to nie ma reakcji na przycisk po za jego podświetleniem
47 2024-02-09 21:52:02
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
jak zmienię hasło to bez problemu się zapisuje w 5 sekund . a jak zmienię na bezprzewodowy most , wprowadzę ustawienia i daję zapisz zmiany to mieli i pokazuje : proszę czekac aż ustawienia zostaną zastosowane i tak wisi
48 2024-02-09 21:36:15
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Właśnie nie. Wraca do głównej strony konfiguracji
49 2024-02-09 21:30:17
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Wrzuciłem 1.14 do tego WD3600. Jednak gdy ustawiłem go jako bezprzewodowy most i wpisałem ustawienia , które potwierdzam to każe czekać na wprowadzenie zmian bez końca . Mieli i mieli i nic się nie dzieje. Po odświeżeniu strony po 30 min wraca do strony głownej
50 2024-02-07 14:27:43
Odp: Router do gargoyle (87 odpowiedzi, napisanych Sprzęt / Hardware)
Juz zakupiłem router WDR3600 przyjdzie za 2 dni, teraz pytanie. Ma on pracować jako most wifi więc jakiego gargoyle mu wrzucić 1.6.2.2 czy 1.10.0.3
Znalezione posty: 26 do 50 z 53
Strony Poprzednia 1 2 3 Następna
eko.one.pl → Posty przez gracus7
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc