Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez mrnamextv
Strony Poprzednia 1 2
Not from uBoot , from terminal , when software upload press enter , and do it.
Mtd11 command:
mtd erase mtd11
Result: no space left on device.....
I tried
dd if /dev/zero of=/dev/mtd11 bs=4M
No, space left on device 
Not from uBoot , from terminal , when software upload press enter , and do it.
But always from the serial port when I press Enter? Or also from OpenWRT?
please do "nand erase " for partitions mtd0 mtd3 mtd4 mtd5 mtd7 mtd10 mtd11.
In uBoot, mtd4 and mtd11 are blocked; I performed an erase from uBoot, indicating the block. Analyzing mtd11 blocks, there are 400 blocks.
"The issue I'm facing is that the reset button on Nordic is not working; the indicator lights remain blue without performing a reset. Additionally, upon the first boot, the web interface loads the webpage, I enter the password, and then the entire graphical interface of Nordic stops working. If I refresh the web page, the web interface is no longer loaded. However, the ping remains stable; it never drops. When using the framework method, it often freezes at root_image, but providing an IP seems to work. Yet, the graphical interface consistently crashes with any version of Tim, Nordic, or Elisa." this is example https://ibb.co/cNyYL14
Hello guys, I have a serious issue with my OpenWRT. I bought this router with a damaged partition, the FOTA MTD11. It shows these errors, and I've tried to rewrite it from U-Boot, but it says there is not enough space to load it even from U-Boot. I attempted to use the kmod-mtd-rw package, but the result remains the same. The error is shown in the attached photo.
Moreover, the framework is not functioning anymore. I purchased it in this condition from the previous owner, and I wanted to fix it.
I am eagerly awaiting responses from someone more experienced who can guide me in the best possible way. Thank you very much. You can find the image with the error details on my Google Drive here ---> https://ibb.co/JFnGkGZ.
If I can't upload the photo, just let me know. I wanted to show you the serious problem
Hello, I've installed OpenWRT and tried various versions, including version 23.05 from the OpenWRT website. Despite installing QMI with the required packages, as indicated on the official site to enable SIM functionality, I'm encountering an issue. Some SIM cards connect and navigate correctly, while others, including Italian virtual operators like Kena Mobile and Ho Mobile, establish an internet connection with a green LED but disconnect after 3 minutes. Very Mobile, another MVNO, works correctly. I also tried a Polish version where the LED stays solid blue with one of the two SIMs, but even after setting the APN, it doesn't find data traffic. I've also installed OpenWRT in a clean version without any additional packages, but the issue persists. Do you have any advice or suggestions?
When browsing with the non-functioning SIMs, the LED flashes green with a very slow connection. It manages to install the `opkg update` command just fine.Thank you for response
Resolved imei 4G smartphone not work without sim kena ho mobile.
You can always do it from uBoot , but you have to connect to serial console.
Yes I know I can do it from the serial. But to overwrite, is it enough to delete with the 'nand erase' command mentioned above?"
Hello guys, I wanted to know some information. I have an issue with my ZTE MF286D router with OpenWRT, and I want to revert to Nordic B12. I've tried using the kmod-mtd-rw package, setting it to 1, and I've already overwritten the partitions once. Now, mtd4.bin is mtd11.bin, and I'm getting an erase error. It won't let me overwrite these two partitions. I have the Nordic dump files downloaded and want to overwrite them from Nordic. I wanted to know the command for mtd4 and 11:
mtd4
nand erase..........
And
nand write..........
mtd11.bin
nand erase........
nand write.......
What are the hex values to be entered?
Hello, guys, has anyone ever tried changing the hash value of a Nordic B12 to use the admin password?
Hello, I've installed OpenWRT and tried various versions, including version 23.05 from the OpenWRT website. Despite installing QMI with the required packages, as indicated on the official site to enable SIM functionality, I'm encountering an issue. Some SIM cards connect and navigate correctly, while others, including Italian virtual operators like Kena Mobile and Ho Mobile, establish an internet connection with a green LED but disconnect after 3 minutes. Very Mobile, another MVNO, works correctly. I also tried a Polish version where the LED stays solid blue with one of the two SIMs, but even after setting the APN, it doesn't find data traffic. I've also installed OpenWRT in a clean version without any additional packages, but the issue persists. Do you have any advice or suggestions?
When browsing with the non-functioning SIMs, the LED flashes green with a very slow connection. It manages to install the `opkg update` command just fine.
Thank you for response
@Cezary solved by reporting the nordic mtd dump file, replace all except mtd4.bin
thank you
@Cezary hello partitions restored but the problem has not changed:
smem ram ptable found: ver: 1 len: 3
DRAM: 256 MiB
machid : 0x8010001
NAND: ID = 302012c
Vendor = 2c
Device = 1
ONFI device found
SF: Detected GD25Q16 with page size 4 KiB, total 2 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000
130 MiB
In: serial
Out: serial
Err: serial
machid: 8010001
flash_type: 0
Uaztemain: enter into !
ZTE_InitFotaFlashPara: nand_curr_device=0
zte_getHandOffState: read data=0x4e from 0x0
Press ESC to abort autoboot in 0 seconds
setenv - set environment variables
guys I wanted to ask you for a lot of help I backed up all the intact partitions of openwrt before it broke, now I have all the partitions from mtd0 up to mtd21 how do you load them all via
and delete
and write
Has anyone ever done this or knows where to find the guide to restore damaged partitions?
If I load openwrt I can only load the file
openwrt-ipq40xx-generic-zte_mf286d-initramfs-fit-zImage.itb
if I load systemupgrade this happens
PREM ESC To abort autoboot in 0 seconds
setenv enviroment variables
(IPQ40xx) #
Hi guys, what could be causing the fact that when I enter the ATI UWAGA imei command it doesn't come out OK but gives me an Error. What could it depend on? I repeat, it still works in 4G with all SIM cards, but this error it gives is strange. This week I received a virgin ZTE MF286D that had never been opened. I'll try to do the same procedure all over again and see if it gives an error or if it says ok. I know what it could be and I also know what could have given the error:
1 the dummy file already overwritten by another imei and I have already corrected this.
2. MODEM pcie crashed during an update causing error after power went out. I'll keep you updated, the only thing I get that's different from the guide is error instead of ok.
@stick86
Do any of you have the mtd8.bin and mtd9.bin files of tim version b15 or later? I'll explain the firmware on some ZTEs, text messages from sending to receiving, receiving from sending don't work. Let me know, thanks
There is a tutorial on how to back up the mtd8.bin, mtd9.bin and delta signature partitions, in short, the files that are used to back up and import onto new clean firmware to update.
These files are "stole" from router ,just after it downloads upgrade from server ( with that proces today is not possible) , so after that router have to do something with it , so this proces have to be started manually via terminal.
For modem @stich86 found a way , that some files have to be upload to modem via adb and AT command have to be made.
Now it is also a case what to do with other files for router it self to be updated.
Where can I find stick86's tutorial for image files? Is there also the image file for Nordic b12? If you turn me the link of the tutorial? Thanks so it should be used with putty via modem? Via terminal or via serial with putty? Thank you
Then maybe somone start to dig how to start update manually after downloading file image.zip to fota folder , since update files are availble: https://www.mediafire.com/folder/aas2kd1518bzr/Nordic
But should it be entered via serial port or from the zte framework update? Can the photo file be edited within systems? I have a nordic b11 that I can modify from the framework update.exe do you say that by modifying those files it is easy to upload?
No imei works anymore even from the delta script, even I have the same problem it seems that if you install telia it continues to update. I did a clean install from nordic b02 with password from serial from b02 getting no updates available. It seems that zte has made some changes. However, the next time to say ignorant to people who are studying in the field until now, I would say that it is not acceptable. If used https://gist.github.com/Leo-PL/051a0b2b … 46e4a809cd You will see that all firmwares except non-ELISA and TIM give not find. While others like telia still give that they are online. We await results from those who are more experienced. This was stick86's advice on the Italian site but still not found by following this script. Until 5 days ago everything works, mounted on a router but I didn't have time on this one. I would like to add that all imei tried by me none from available versions b03 and higher. Those who are experts could extrapolate the data from a Nordic b12 and via serial do a tutorial to get them imported again I know they do it because up to the b10 version. I see on this online site that there are images that can be imported it would be nice to do the same with nordic b12 so the problem would be solved. I can't quite understand this person's instructions. http://ixion.pld-linux.org/~arekm/mf286d/
Strony Poprzednia 1 2
eko.one.pl → Posty przez mrnamextv
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc