FAQ o OpenWrt | Sprzedam różne routery | Oddam

2018-09-26 18:06:48

root@OpenWrt:~# logread
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.017752] pci 0000:00:02.0: brid ge configuration invalid ([bus 00-00]), reconfiguring
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017800] pci 0000:01:00.0: [11 ab:2a55] type 00 class 0x020000
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017823] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017833] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017891] pci 0000:01:00.0: sup ports D1 D2
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017894] pci 0000:01:00.0: PME # supported from D0 D1 D3hot D3cold
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.017944] PCI: bus1: Fast back t o back transfers disabled
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.017951] pci_bus 0000:01: busn _res: [bus 01-ff] end is updated to 01
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018002] pci 0000:02:00.0: [11 ab:2a55] type 00 class 0x020000
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018031] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018042] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018120] pci 0000:02:00.0: sup ports D1 D2
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018124] pci 0000:02:00.0: PME # supported from D0 D1 D3hot D3cold
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018175] PCI: bus2: Fast back t o back transfers disabled
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 0.018182] pci_bus 0000:02: busn _res: [bus 02-ff] end is updated to 02
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018197] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018203] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018210] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018220] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018229] pci 0000:00:01.0: PCI bridge to [bus 01]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018235] pci 0000:00:01.0: br idge window [mem 0xe0000000-0xe01fffff]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018242] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018253] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018263] pci 0000:00:02.0: PCI bridge to [bus 02]
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.018268] pci 0000:00:02.0: br idge window [mem 0xe0200000-0xe03fffff]
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 0.018486] mv_xor f1060800.xor: Marvell shared XOR driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.061576] mv_xor f1060800.xor: M arvell XOR (Descriptor Mode): ( xor cpy intr )
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 0.061680] mv_xor f1060900.xor: Marvell shared XOR driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.121532] mv_xor f1060900.xor: M arvell XOR (Descriptor Mode): ( xor cpy intr )
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.121672] Serial: 8250/16550 dri ver, 16 ports, IRQ sharing enabled
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.122285] console [ttyS0] disabl ed
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.142353] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.905944] console [ttyS0] enable d
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.910946] loop: module loaded
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.914414] ahci-mvebu f10a8000.sa ta: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.923509] ahci-mvebu f10a8000.sa ta: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.932658] scsi host0: ahci-mvebu
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.936203] scsi host1: ahci-mvebu
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.939680] ata1: SATA max UDMA/13 3 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.947639] ata2: SATA max UDMA/13 3 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
Wed Sep 26 17:16:31 2018 kern.warn kernel: [ 0.956033] pxa3xx-nand f10d0000.f lash: This platform can't do DMA on this device
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.963836] nand: device found, Ma nufacturer ID: 0x01, Chip ID: 0xf1
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.970215] nand: AMD/Spansion S34 ML01G2
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.974161] nand: 128 MiB, SLC, er ase size: 128 KiB, page size: 2048, OOB size: 64
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.981774] pxa3xx-nand f10d0000.f lash: ECC strength 16, ECC step size 2048
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.988951] Bad block table found at page 65472, version 0x01
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 0.995057] Bad block table found at page 65408, version 0x01
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.001087] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.008172] Creating 10 MTD part itions on "pxa3xx_nand-0":
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.013684] 0x000000000000-0x000 000200000 : "u-boot"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.018896] 0x000000200000-0x000 000240000 : "u_env"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.023993] 0x000000240000-0x000 000280000 : "s_env"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.029066] 0x000000900000-0x000 000a00000 : "devinfo"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.034324] 0x000000a00000-0x000 003200000 : "kernel1"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.039655] 0x000001000000-0x000 003200000 : "rootfs1"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.044988] 0x000003200000-0x000 005a00000 : "kernel2"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.050321] 0x000003800000-0x000 005a00000 : "ubi"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.055306] 0x000005a00000-0x000 008000000 : "syscfg"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.060550] 0x000000280000-0x000 000900000 : "unused_area"
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.066490] libphy: Fixed MDIO Bus : probed
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.070885] libphy: orion_mdio_bus : probed
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.075168] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.083891] mvneta f1070000.ethern et eth0: Using hardware mac address 14:91:82:2a:76:7b
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.093176] mvneta f1034000.ethern et eth1: Using random mac address ae:6f:6e:0e:3e:7d
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.101203] ehci_hcd: USB 2.0 'Enh anced' Host Controller (EHCI) Driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.107758] ehci-pci: EHCI PCI pla tform driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.112252] ehci-platform: EHCI ge neric platform driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.117562] ehci-orion: EHCI orion driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.121676] orion-ehci f1058000.us b: EHCI Host Controller
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.127106] orion-ehci f1058000.us b: new USB bus registered, assigned bus number 1
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.134756] orion-ehci f1058000.us b: irq 38, io mem 0xf1058000
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.161107] orion-ehci f1058000.us b: USB 2.0 started, EHCI 1.00
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.167253] hub 1-0:1.0: USB hub f ound
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.171030] hub 1-0:1.0: 1 port de tected
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.175383] usbcore: registered ne w interface driver usb-storage
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.181576] i2c /dev entries drive r
Wed Sep 26 17:16:31 2018 kern.warn kernel: [ 1.196396] (NULL device *): hwmon _device_register() is deprecated. Please convert the driver to use hwmon_device_ register_with_info().
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.208827] orion_wdt: Initial tim eout 171 sec
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.213529] sdhci: Secure Digital Host Controller Interface driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.219733] sdhci: Copyright(c) Pi erre Ossman
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.224199] sdhci-pltfm: SDHCI pla tform and OF driver helper
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.233422] marvell-cesa f1090000. crypto: CESA device successfully registered
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.241025] NET: Registered protoc ol family 10
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.245964] Segment Routing with I Pv6
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.249668] NET: Registered protoc ol family 17
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.254153] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.267268] 8021q: 802.1Q VLAN Sup port v1.8
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.271531] Registering SWP/SWPB emulation handler
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.277773] xhci-hcd f10f8000.usb3 : xHCI Host Controller
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.282535] ata2: SATA link down ( SStatus 0 SControl 300)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.282559] ata1: SATA link down ( SStatus 0 SControl 300)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.294019] xhci-hcd f10f8000.usb3 : new USB bus registered, assigned bus number 2
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.301597] xhci-hcd f10f8000.usb3 : hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.310178] xhci-hcd f10f8000.usb3 : irq 43, io mem 0xf10f8000
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.316179] hub 2-0:1.0: USB hub f ound
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.319959] hub 2-0:1.0: 1 port de tected
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.324011] xhci-hcd f10f8000.usb3 : xHCI Host Controller
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.329349] xhci-hcd f10f8000.usb3 : new USB bus registered, assigned bus number 3
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.336878] xhci-hcd f10f8000.usb3 : Host supports USB 3.0 SuperSpeed
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.343382] usb usb3: We don't kno w the algorithms for LPM for this host, disabling LPM.
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.351674] hub 3-0:1.0: USB hub f ound
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.355451] hub 3-0:1.0: 1 port de tected
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.359729] UBI: auto-attach mtd 7
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.363090] ubi0: attaching mtd7
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.373649] random: fast init do ne
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.460204] ubi0: scanning is fi nished
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.468229] ubi0: attached mtd7 (name "ubi", size 34 MiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.473658] ubi0: PEB size: 1310 72 bytes (128 KiB), LEB size: 126976 bytes
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.480559] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.487377] ubi0: VID header off set: 2048 (aligned 2048), data offset: 4096
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.494370] ubi0: good PEBs: 272 , bad PEBs: 0, corrupted PEBs: 0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.500400] ubi0: user volume: 2 , internal volumes: 1, max. volumes count: 128
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.507653] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1606286824
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.516826] ubi0: available PEBs : 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.526097] ubi0: background thr ead "ubi_bgt0d" started, PID 696
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.532350] block ubiblock0_0: cre ated from ubi0:0(rootfs)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 1.537859] ubiblock: device ubi block0_0 (rootfs) set to be root filesystem
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.545045] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mii:10
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.551867] mvsw61xx 10.mvsw61xx: Using direct addressing
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.567379] hctosys: unable to ope n rtc device (rtc0)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 1.572786] Waiting 1 sec before m ounting root device...
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 2.632749] VFS: Mounted root (squ ashfs filesystem) readonly on device 254:0.
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 2.640465] Freeing unused kernel memory: 1024K
Wed Sep 26 17:16:31 2018 user.info kernel: [ 2.841988] init: Console is alive
Wed Sep 26 17:16:31 2018 user.info kernel: [ 2.845463] init: - watchdog -
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 2.981119] usb 2-1: new high-spee d USB device number 2 using xhci-hcd
Wed Sep 26 17:16:31 2018 user.info kernel: [ 3.106967] kmodloader: loading ke rnel modules from /etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.149437] usbcore: registered ne w interface driver uas
Wed Sep 26 17:16:31 2018 user.info kernel: [ 3.154832] kmodloader: done loadi ng kernel modules from /etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.168299] usb-storage 2-1:1.0: U SB Mass Storage device detected
Wed Sep 26 17:16:31 2018 user.info kernel: [ 3.174537] init: - preinit -
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.178523] scsi host2: usb-storag e 2-1:1.0
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.345934] mvneta f1070000.ethern et tmp0: renamed from eth0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 3.351825] random: procd: unini tialized urandom read (4 bytes read)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.392485] mvneta f1034000.ethern et eth0: renamed from eth1
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.432458] mvneta f1070000.ethern et eth1: renamed from tmp0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 3.729365] random: jshn: uninit ialized urandom read (4 bytes read)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 3.747692] random: jshn: uninit ialized urandom read (4 bytes read)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.937652] mvneta f1034000.ethern et eth0: configuring for fixed/sgmii link mode
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.945505] IPv6: ADDRCONF(NETDEV_ UP): eth0: link is not ready
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.951564] mvneta f1034000.ethern et eth0: Link is Up - 1Gbps/Full - flow control off
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 3.959456] IPv6: ADDRCONF(NETDEV_ CHANGE): eth0: link becomes ready
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 4.232711] scsi 2:0:0:0: Direct -Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 4.241827] sd 2:0:0:0: [sda] 30 720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 4.250043] sd 2:0:0:0: [sda] Wr ite Protect is off
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 4.254865] sd 2:0:0:0: [sda] Mod e Sense: 23 00 00 00
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 4.255494] sd 2:0:0:0: [sda] Wr ite cache: disabled, read cache: enabled, doesn't support DPO or FUA
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 4.268139] sda: sda1
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 4.272393] sd 2:0:0:0: [sda] At tached SCSI removable disk
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.020103] mount_root: loading km ods from internal overlay
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.032475] kmodloader: loading ke rnel modules from //etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.039768] kmodloader: done loadi ng kernel modules from //etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.383942] UBIFS (ubi0:1): back ground thread "ubifs_bgt0_1" started, PID 830
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.404845] UBIFS (ubi0:1): reco very needed
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.419003] random: crng init do ne
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.422419] random: 3 urandom wa rning(s) missed due to ratelimiting
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.478326] UBIFS (ubi0:1): reco very completed
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.482828] UBIFS (ubi0:1): UBIF S: mounted UBI device 0, volume 1, name "rootfs_data"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.490691] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.500651] UBIFS (ubi0:1): FS s ize: 25649152 bytes (24 MiB, 202 LEBs), journal size 1269760 bytes (1 MiB, 10 LE Bs)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.511132] UBIFS (ubi0:1): rese rved for root: 1211472 bytes (1183 KiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.517774] UBIFS (ubi0:1): medi a format: w4/r0 (latest is w5/r0), UUID D886A2AA-C21E-48EB-BF64-2D44E7575C9D, sm all LPT model
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.530048] block: attempting to l oad /tmp/ubifs_cfg/upper/etc/config/fstab
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.540411] block: extroot: not co nfigured
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.591151] UBIFS (ubi0:1): un-m ount UBI device 0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.595880] UBIFS (ubi0:1): back ground thread "ubifs_bgt0_1" stops
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.642067] UBIFS (ubi0:1): back ground thread "ubifs_bgt0_1" started, PID 833
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.691999] UBIFS (ubi0:1): UBIF S: mounted UBI device 0, volume 1, name "rootfs_data"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.699863] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.709829] UBIFS (ubi0:1): FS s ize: 25649152 bytes (24 MiB, 202 LEBs), journal size 1269760 bytes (1 MiB, 10 LE Bs)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.720314] UBIFS (ubi0:1): rese rved for root: 1211472 bytes (1183 KiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 7.726961] UBIFS (ubi0:1): medi a format: w4/r0 (latest is w5/r0), UUID D886A2AA-C21E-48EB-BF64-2D44E7575C9D, sm all LPT model
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.741410] mount_root: loading km ods from internal overlay
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.774722] kmodloader: loading ke rnel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 user.info kernel: [ 7.792312] kmodloader: done loadi ng kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Wed Sep 26 17:16:31 2018 user.info kernel: [ 8.053842] block: attempting to l oad /tmp/ubifs_cfg/upper/etc/config/fstab
Wed Sep 26 17:16:31 2018 user.info kernel: [ 8.062360] block: extroot: not co nfigured
Wed Sep 26 17:16:31 2018 user.info kernel: [ 8.101739] mount_root: switching to ubifs overlay
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.153932] ubi1: attaching mtd8
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.255508] ubi1: scanning is fi nished
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.263619] ubi1: attached mtd8 (name "syscfg", size 38 MiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.269303] ubi1: PEB size: 1310 72 bytes (128 KiB), LEB size: 126976 bytes
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.276218] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.283044] ubi1: VID header off set: 2048 (aligned 2048), data offset: 4096
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.290033] ubi1: good PEBs: 296 , bad PEBs: 8, corrupted PEBs: 0
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.296068] ubi1: user volume: 1 , internal volumes: 1, max. volumes count: 128
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.303323] ubi1: max/mean erase counter: 390/180, WL threshold: 4096, image sequence number: 55933684
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.312672] ubi1: available PEBs : 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.321939] ubi1: background thr ead "ubi_bgt1d" started, PID 845
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.332255] UBIFS (ubi1:0): back ground thread "ubifs_bgt1_0" started, PID 849
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.388361] UBIFS (ubi1:0): UBIF S: mounted UBI device 1, volume 0, name "syscfg"
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.395800] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.405764] UBIFS (ubi1:0): FS s ize: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LE Bs)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.416246] UBIFS (ubi1:0): rese rved for root: 1619295 bytes (1581 KiB)
Wed Sep 26 17:16:31 2018 kern.notice kernel: [ 8.422892] UBIFS (ubi1:0): medi a format: w4/r0 (latest is w5/r0), UUID 4B6A3865-40E3-4411-9669-1CAE95B966C3, sm all LPT model
Wed Sep 26 17:16:31 2018 user.warn kernel: [ 8.435585] urandom-seed: Seeding with /etc/urandom.seed
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 8.491637] mvneta f1034000.ethern et eth0: Link is Down
Wed Sep 26 17:16:31 2018 user.info kernel: [ 8.543273] procd: - early -
Wed Sep 26 17:16:31 2018 user.info kernel: [ 8.546188] procd: - watchdog -
Wed Sep 26 17:16:31 2018 user.info kernel: [ 9.147931] procd: - watchdog -
Wed Sep 26 17:16:31 2018 user.info kernel: [ 9.151197] procd: - ubus -
Wed Sep 26 17:16:31 2018 user.info kernel: [ 9.206218] procd: - init -
Wed Sep 26 17:16:31 2018 user.info kernel: [ 9.361480] kmodloader: loading ke rnel modules from /etc/modules.d/*
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.372004] tun: Universal TUN/TAP device driver, 1.6
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.379986] l2tp_core: L2TP core d river, V2.0
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.385111] l2tp_netlink: L2TP net link interface
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.390636] gre: GRE over IPv4 dem ultiplexor driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.396977] ip_gre: GRE over IPv4 tunneling driver
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.403525] ip6_tables: (C) 2000-2 006 Netfilter Core Team
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.742417] Loading modules backpo rted from Linux version wt-2017-11-01-0-gfe248fc2c180
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.750472] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.767267] <<Marvell Mac80211 Wir eless PCIE Network Driver version 10.3.8.0-20180615>>
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 9.775337] pci 0000:00:01.0: enab ling device (0140 -> 0142)
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 9.781145] ieee80211 phy0: priv- >pcmd_buf = ddd18000 priv->pphys_cmd_buf = 1dd18000
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 9.789057] ieee80211 phy0: fw do wnload start
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 9.908871] ieee80211 phy0: FwSiz e = 118776 downloaded Size = 118776 curr_iteration 65495
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.781112] ieee80211 phy0: fw do wnload complete
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.781136] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.787214] ieee80211 phy0: pcmd = ddd18000
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.805139] ieee80211 phy0: firmwa re version: 0x702091a
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.828146] ieee80211 phy0: firmwa re region code: 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856197] ieee80211 phy0: regdo main: FCC
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856203] ieee80211 phy0: Chann el: 36: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856209] ieee80211 phy0: 12 12 12 12 12 12 12 12 10 10 10 10 f f f f
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856212] ieee80211 phy0: Chann el: 40: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856218] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856221] ieee80211 phy0: Chann el: 44: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856226] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856229] ieee80211 phy0: Chann el: 48: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856234] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856237] ieee80211 phy0: Chann el: 52: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856243] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856246] ieee80211 phy0: Chann el: 56: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856251] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856254] ieee80211 phy0: Chann el: 60: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856259] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856263] ieee80211 phy0: Chann el: 64: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856268] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856271] ieee80211 phy0: Chann el: 100: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856277] ieee80211 phy0: 10 10 10 10 11 11 11 11 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856280] ieee80211 phy0: Chann el: 104: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856285] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856288] ieee80211 phy0: Chann el: 108: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856294] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856297] ieee80211 phy0: Chann el: 112: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856302] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856305] ieee80211 phy0: Chann el: 116: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856310] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856313] ieee80211 phy0: Chann el: 120: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856319] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856322] ieee80211 phy0: Chann el: 124: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856327] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856330] ieee80211 phy0: Chann el: 128: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856335] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856338] ieee80211 phy0: Chann el: 132: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856344] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856347] ieee80211 phy0: Chann el: 136: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856352] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856355] ieee80211 phy0: Chann el: 140: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856360] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856363] ieee80211 phy0: Chann el: 149: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856369] ieee80211 phy0: 16 16 16 16 16 16 16 16 15 15 15 15 15 15 15 15
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856372] ieee80211 phy0: Chann el: 153: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856377] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856380] ieee80211 phy0: Chann el: 157: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856385] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856388] ieee80211 phy0: Chann el: 161: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856394] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856396] ieee80211 phy0: Chann el: 165: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.856402] ieee80211 phy0: 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.856947] ieee80211 phy0: 2G dis abled, 5G enabled
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.861874] ieee80211 phy0: 4 TX a ntennas, 4 RX antennas
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.867387] pci 0000:00:02.0: enab ling device (0140 -> 0142)
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.873181] ieee80211 phy1: priv- >pcmd_buf = ddc9c000 priv->pphys_cmd_buf = 1dc9c000
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 10.879468] ieee80211 phy1: fw do wnload start
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 10.981416] EXT4-fs (sda1): mounte d filesystem with ordered data mode. Opts:
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.000843] ieee80211 phy1: FwSiz e = 118776 downloaded Size = 118776 curr_iteration 65510
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.867108] ieee80211 phy1: fw do wnload complete
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.867133] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.873224] ieee80211 phy1: pcmd = ddc9c000
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.890124] ieee80211 phy1: firmwa re version: 0x702091a
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.913401] ieee80211 phy1: firmwa re region code: 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940199] ieee80211 phy1: regdo main: FCC
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940204] ieee80211 phy1: Chann el: 1: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940209] ieee80211 phy1: 17 10 10 10 f f f f e e e e 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940212] ieee80211 phy1: Chann el: 2: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940218] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940221] ieee80211 phy1: Chann el: 3: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940226] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940229] ieee80211 phy1: Chann el: 4: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940235] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940238] ieee80211 phy1: Chann el: 5: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940243] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940246] ieee80211 phy1: Chann el: 6: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940252] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940255] ieee80211 phy1: Chann el: 7: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940260] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940263] ieee80211 phy1: Chann el: 8: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940268] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940271] ieee80211 phy1: Chann el: 9: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940277] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940280] ieee80211 phy1: Chann el: 10: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940285] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940288] ieee80211 phy1: Chann el: 11: 0x0 0x0 0xf
Wed Sep 26 17:16:31 2018 kern.debug kernel: [ 11.940294] ieee80211 phy1: 17 12 12 12 13 13 13 13 f f f f 0 0 0 0
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.941014] ieee80211 phy1: 2G ena bled, 5G disabled
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.945940] ieee80211 phy1: 4 TX a ntennas, 4 RX antennas
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.981437] fuse init (API version 7.26)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.987490] usbcore: registered ne w interface driver cdc_acm
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 11.993204] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.001787] usbcore: registered ne w interface driver cdc_wdm
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.008382] ip_tables: (C) 2000-20 06 Netfilter Core Team
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.342848] nf_conntrack version 0 .5.0 (8192 buckets, 32768 max)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.533206] usbcore: registered ne w interface driver usblp
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.540561] usbcore: registered ne w interface driver usbserial
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.546459] usbcore: registered ne w interface driver usbserial_generic
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.553042] usbserial: USB Serial support registered for generic
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.563173] xt_time: kernel timezo ne is -0000
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.567966] usbcore: registered ne w interface driver cdc_ether
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.574497] usbcore: registered ne w interface driver cdc_ncm
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.580485] usbcore: registered ne w interface driver huawei_cdc_ncm
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.743380] PPP generic driver ver sion 2.4.2
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.748414] PPP MPPE Compression m odule registered
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.753577] NET: Registered protoc ol family 24
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.758410] PPTP driver version 0. 8.5
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.762694] usbcore: registered ne w interface driver qmi_wwan
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.768990] usbcore: registered ne w interface driver rndis_host
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.775281] usbcore: registered ne w interface driver sierra
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.780901] usbserial: USB Serial support registered for Sierra USB modem
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.788191] usbcore: registered ne w interface driver sierra_net
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.795062] usbcore: registered ne w interface driver cdc_mbim
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.802618] l2tp_ppp: PPPoL2TP ker nel driver, V2.0
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.807846] usbcore: registered ne w interface driver option
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.813494] usbserial: USB Serial support registered for GSM modem (1-port)
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.821689] usbcore: registered ne w interface driver qcserial
Wed Sep 26 17:16:31 2018 kern.info kernel: [ 12.827483] usbserial: USB Serial support registered for Qualcomm USB modem
Wed Sep 26 17:16:31 2018 user.info kernel: [ 12.834568] kmodloader: done loadi ng kernel modules from /etc/modules.d/*
Wed Sep 26 17:16:31 2018 user.notice dnsmasq: DNS rebinding protection is active , will discard upstream RFC1918 responses!
Wed Sep 26 17:16:31 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed Sep 26 17:16:31 2018 user.notice dnsmasq: Allowing RFC1918 responses for dom ain free.aero2.net.pl
Wed Sep 26 17:16:32 2018 daemon.info dnsmasq[2056]: started, version 2.80test3 c achesize 150
Wed Sep 26 17:16:32 2018 daemon.info dnsmasq[2056]: DNS service limited to local subnets
Wed Sep 26 17:16:32 2018 daemon.info dnsmasq[2056]: compile time options: IPv6 G NU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipse t no-auth no-DNSSEC no-ID loop-detect inotify dumpfile

2018-09-26 18:05:37

config:

client
dev tun
proto tcp
remote 31.171.154.155 443
resolv-retry infinite
remote-random
nobind
tun-mtu 1500
tun-mtu-extra 32
mssfix 1450
persist-key
persist-tun
ping 15
ping-restart 0
ping-timer-rem
reneg-sec 0
remote-cert-tls server
#mute 10000
auth-user-pass /etc/openvpn/secret
ca ca.crt
tls-auth ta.key 1
comp-lzo
verb 3
pull
fast-io
cipher AES-256-CBC
auth SHA512
key-direction 1

2018-09-26 17:46:04

root@OpenWrt:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.7.7.1 128.0.0.0 UG 0 0 0 tun0
0.0.0.0 81.99.132.1 0.0.0.0 UG 0 0 0 eth1.2
10.7.7.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
31.171.154.155 81.99.132.1 255.255.255.255 UGH 0 0 0 eth1.2
81.99.132.0 0.0.0.0 255.255.252.0 U 0 0 0 eth1.2
128.0.0.0 10.7.7.1 128.0.0.0 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan

2018-09-26 17:27:39

hmmmm dodane i dalej leci wszystko przez vpn i chyba teraz to nie wiem gdzie konfigurowac trasy.

plik rc.local mam tak

ip rule add from 192.168.1.101 table vpn
ip route add default via 10.7.7.1 dev tun0 table vpn
ip route flush cache
/etc/openvpn/reconnect.sh &
# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.
exit 0

tylko nie krzycz , ucze sie

2018-09-26 17:08:33

Tak
NordVpn - OpenVPN

2018-09-26 16:56:04

Dobra kolego cezary , przepraszam za cale to zamieszanie.
podarowalem sobie tamten vpn i podlaczylem inny.

mozemy zaczac od poczatku - dziekuje

Mam teraz polaczenie vpn , zalaczam konfigi :
uci show network

root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd67:b398:2b93::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.wan=interface
network.wan.ifname='eth1.2'
network.wan.force_link='1'
network.wan.proto='dhcp'
network.wan.peerdns='0'
network.wan.dns='8.8.8.8' '8.8.4.4'
network.wan6=interface
network.wan6.ifname='eth1.2'
network.wan6.proto='dhcpv6'
network.wan6.reqaddress='try'
network.wan6.reqprefix='auto'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0 1 2 3 5t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='4 6t'
network.@route[0]=route
network.nordvpntun=interface
network.nordvpntun.proto='none'
network.nordvpntun.ifname='tun0'

uci show firewall

root@OpenWrt:~# uci show firewall
firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].forward='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='Vpn wan wan6 vpnonline vpn'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fc00::/6'
firewall.@rule[3].dest_ip='fc00::/6'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@rule[7]=rule
firewall.@rule[7].name='Allow-IPSec-ESP'
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].name='Allow-ISAKMP'
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[9]=rule
firewall.@rule[9]._name='FTP'
firewall.@rule[9].src='wan'
firewall.@rule[9].target='ACCEPT'
firewall.@rule[9].proto='tcp'
firewall.@rule[9].dest_port='21'
firewall.@redirect[0]=redirect
firewall.@redirect[0].target='DNAT'
firewall.@redirect[0].src='wan'
firewall.@redirect[0].dest='lan'
firewall.@redirect[0].proto='tcp udp'
firewall.@redirect[0].src_dport='1083'
firewall.@redirect[0].dest_ip='192.168.1.101'
firewall.@redirect[0].dest_port='1083'
firewall.@redirect[0].name='oscam'
firewall.@redirect[1]=redirect
firewall.@redirect[1].target='DNAT'
firewall.@redirect[1].src='wan'
firewall.@redirect[1].dest='lan'
firewall.@redirect[1].proto='tcp udp'
firewall.@redirect[1].src_dport='83'
firewall.@redirect[1].dest_ip='192.168.1.102'
firewall.@redirect[1].dest_port='83'
firewall.@redirect[1].name='oscam_sypialnia'
firewall.@rule[10]=rule
firewall.@rule[10].name='OpenVPN'
firewall.@rule[10].target='ACCEPT'
firewall.@rule[10].src='wan'
firewall.@rule[10].proto='udp'
firewall.@rule[10].dest_port='993'
firewall.@rule[11]=rule
firewall.@rule[11].enabled='1'
firewall.@rule[11].target='ACCEPT'
firewall.@rule[11].src='wan'
firewall.@rule[11].dest='lan'
firewall.@zone[2]=zone
firewall.@zone[2].name='vpnfirewall'
firewall.@zone[2].input='REJECT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].forward='REJECT'
firewall.@zone[2].masq='1'
firewall.@zone[2].mtu_fix='1'
firewall.@zone[2].network='nordvpntun'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].src='lan'
firewall.@forwarding[1].dest='vpnfirewall'

ifconfig -a

root@OpenWrt:~# ifconfig -a
br-lan Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fd67:b398:2b93::1/60 Scope:Global
inet6 addr: fe80::1491:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16926 errors:0 dropped:0 overruns:0 frame:0
TX packets:14263 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2441323 (2.3 MiB) TX bytes:6747155 (6.4 MiB)
erspan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1450 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
inet6 addr: fe80::1491:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15292 errors:0 dropped:0 overruns:0 frame:0
TX packets:13664 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:532
RX bytes:2717993 (2.5 MiB) TX bytes:6625170 (6.3 MiB)
Interrupt:37
eth0.1 Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14898 errors:0 dropped:1 overruns:0 frame:0
TX packets:13634 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2425230 (2.3 MiB) TX bytes:6566634 (6.2 MiB)
eth1 Link encap:Ethernet HWaddr 14:91:82:2A:76:7B
inet6 addr: fe80::1691:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7437 errors:0 dropped:0 overruns:0 frame:0
TX packets:5855 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:532
RX bytes:5102948 (4.8 MiB) TX bytes:2139351 (2.0 MiB)
Interrupt:36
eth1.2 Link encap:Ethernet HWaddr 14:91:82:2A:76:7B
inet addr:81.99.132.253 Bcast:81.99.135.255 Mask:255.255.252.0
inet6 addr: fe80::1691:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6118 errors:0 dropped:0 overruns:0 frame:0
TX packets:5848 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4900494 (4.6 MiB) TX bytes:2115133 (2.0 MiB)
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-62-00-97-0F-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
gretap0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1462 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:158 errors:0 dropped:0 overruns:0 frame:0
TX packets:158 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14227 (13.8 KiB) TX bytes:14227 (13.8 KiB)
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.7.7.63 P-t-P:10.7.7.63 Mask:255.255.255.0
inet6 addr: fe80::f640:59a8:182c:243c/64 Scope:Link
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:8256 errors:0 dropped:0 overruns:0 frame:0
TX packets:7090 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:4294839 (4.0 MiB) TX bytes:1512970 (1.4 MiB)
wlan0 Link encap:Ethernet HWaddr 16:91:82:2A:76:7D
inet6 addr: fe80::1491:82ff:fe2a:767d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1637 errors:0 dropped:0 overruns:0 frame:0
TX packets:2158 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:414355 (404.6 KiB) TX bytes:642790 (627.7 KiB)
wlan1 Link encap:Ethernet HWaddr 16:91:82:2A:76:7C
inet6 addr: fe80::1491:82ff:fe2a:767c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1860 errors:0 dropped:0 overruns:0 frame:0
TX packets:2165 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:327440 (319.7 KiB) TX bytes:715936 (699.1 KiB)

route -n

root@OpenWrt:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.7.7.1 128.0.0.0 UG 0 0 0 tun0
0.0.0.0 81.99.132.1 0.0.0.0 UG 0 0 0 eth1.2
10.7.7.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
31.171.154.155 81.99.132.1 255.255.255.255 UGH 0 0 0 eth1.2
81.99.132.0 0.0.0.0 255.255.252.0 U 0 0 0 eth1.2
128.0.0.0 10.7.7.1 128.0.0.0 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan

caly ruch idzie przez VPN a ja chce tylko 1 lub 2 ip

2018-09-26 15:36:37

No wlasnie nie wiem teraz co jest grane , po l2tp laczy sie bez zadnego problemu a po pptp nie

2018-09-26 14:48:22

route -n przed zmiana protokolu

root@OpenWrt:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.100.201.254 0.0.0.0 UG 0 0 0 l2tp-vpn online
10.100.201.254 0.0.0.0 255.255.255.255 UH 0 0 0 l2tp-vpn online
81.99.132.0 0.0.0.0 255.255.252.0 U 0 0 0 eth1.2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan
195.201.220.59 81.99.132.1 255.255.255.255 UGH 0 0 0 eth1.2

po zmianie mam w logu tak

Wed Sep 26 14:45:15 2018 daemon.warn pppd[5180]: LCP: timeout sending Config-Requests
Wed Sep 26 14:45:15 2018 daemon.notice pppd[5180]: Connection terminated.
Wed Sep 26 14:45:15 2018 daemon.notice pppd[5180]: Modem hangup
Wed Sep 26 14:45:15 2018 daemon.info pppd[5180]: Exit.
Wed Sep 26 14:45:15 2018 daemon.notice netifd: Interface 'vpnonline' is now down
Wed Sep 26 14:45:15 2018 daemon.notice netifd: Interface 'vpnonline' is setting up now
Wed Sep 26 14:45:15 2018 daemon.info pppd[5422]: Plugin pptp.so loaded.
Wed Sep 26 14:45:15 2018 daemon.info pppd[5422]: PPTP plugin version 1.00
Wed Sep 26 14:45:15 2018 daemon.notice pppd[5422]: pppd 2.4.7 started by root, uid 0
Wed Sep 26 14:45:16 2018 kern.info kernel: [ 114.493369] pptp-vpnonline: renamed from ppp0
Wed Sep 26 14:45:16 2018 daemon.info pppd[5422]: Using interface pptp-vpnonline
Wed Sep 26 14:45:16 2018 daemon.notice pppd[5422]: Connect: pptp-vpnonline <--> pptp (de01.vpnonline.eu)
Wed Sep 26 14:45:47 2018 daemon.warn pppd[5422]: LCP: timeout sending Config-Requests
Wed Sep 26 14:45:47 2018 daemon.notice pppd[5422]: Connection terminated.
Wed Sep 26 14:45:47 2018 daemon.notice pppd[5422]: Modem hangup
Wed Sep 26 14:45:47 2018 daemon.info pppd[5422]: Exit.

no i rote -n

root@OpenWrt:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 81.99.132.1 0.0.0.0 UG 0 0 0 eth1.2
81.99.132.0 0.0.0.0 255.255.252.0 U 0 0 0 eth1.2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan
195.201.220.59 81.99.132.1 255.255.255.255 UGH 0 0 0 eth1.2

2018-09-26 14:31:45

Dalej caly ruch idzie przez VPN

2018-09-26 14:14:11

uci show network:

root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd67:b398:2b93::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.wan=interface
network.wan.ifname='eth1.2'
network.wan.proto='dhcp'
network.wan6=interface
network.wan6.ifname='eth1.2'
network.wan6.proto='dhcpv6'
network.wan6.reqaddress='try'
network.wan6.reqprefix='auto'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0 1 2 3 5t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='4 6t'
network.vpnonline=interface
network.vpnonline.proto='l2tp'
network.vpnonline.username='********'
network.vpnonline.password='**********'
network.vpnonline.ipv6='auto'
network.vpnonline.server='de01.vpnonline.eu'
network.vpnonline.buffering='1'
network.@route[0]=route

uci show firewall

root@OpenWrt:~# uci show firewall
firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].forward='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='Vpn wan wan6 vpnonline'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fc00::/6'
firewall.@rule[3].dest_ip='fc00::/6'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@rule[7]=rule
firewall.@rule[7].name='Allow-IPSec-ESP'
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].name='Allow-ISAKMP'
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[9]=rule
firewall.@rule[9]._name='FTP'
firewall.@rule[9].src='wan'
firewall.@rule[9].target='ACCEPT'
firewall.@rule[9].proto='tcp'
firewall.@rule[9].dest_port='21'
firewall.@redirect[0]=redirect
firewall.@redirect[0].target='DNAT'
firewall.@redirect[0].src='wan'
firewall.@redirect[0].dest='lan'
firewall.@redirect[0].proto='tcp udp'
firewall.@redirect[0].src_dport='1083'
firewall.@redirect[0].dest_ip='192.168.1.101'
firewall.@redirect[0].dest_port='1083'
firewall.@redirect[0].name='oscam'
firewall.@redirect[1]=redirect
firewall.@redirect[1].target='DNAT'
firewall.@redirect[1].src='wan'
firewall.@redirect[1].dest='lan'
firewall.@redirect[1].proto='tcp udp'
firewall.@redirect[1].src_dport='83'
firewall.@redirect[1].dest_ip='192.168.1.102'
firewall.@redirect[1].dest_port='83'
firewall.@redirect[1].name='oscam_sypialnia'
firewall.@rule[10]=rule
firewall.@rule[10].name='OpenVPN'
firewall.@rule[10].target='ACCEPT'
firewall.@rule[10].src='wan'
firewall.@rule[10].proto='udp'
firewall.@rule[10].dest_port='993'
firewall.@rule[11]=rule
firewall.@rule[11].enabled='1'
firewall.@rule[11].target='ACCEPT'
firewall.@rule[11].src='wan'
firewall.@rule[11].dest='lan'

ifconfig -a

root@OpenWrt:~# ifconfig -a
br-lan Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fd67:b398:2b93::1/60 Scope:Global
inet6 addr: fe80::1491:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:695300 errors:0 dropped:0 overruns:0 frame:0
TX packets:1812349 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:102530698 (97.7 MiB) TX bytes:2527874087 (2.3 GiB)
erspan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1450 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
inet6 addr: fe80::1491:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:331008 errors:0 dropped:0 overruns:0 frame:0
TX packets:318751 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:532
RX bytes:54026384 (51.5 MiB) TX bytes:301808142 (287.8 MiB)
Interrupt:37
eth0.1 Link encap:Ethernet HWaddr 16:91:82:2A:76:7B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:325663 errors:0 dropped:67 overruns:0 frame:0
TX packets:318719 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:47852814 (45.6 MiB) TX bytes:300529281 (286.6 MiB)
eth1 Link encap:Ethernet HWaddr 14:91:82:2A:76:7B
inet6 addr: fe80::1691:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2146339 errors:0 dropped:0 overruns:0 frame:0
TX packets:643521 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:532
RX bytes:2543732971 (2.3 GiB) TX bytes:101451485 (96.7 MiB)
Interrupt:36
eth1.2 Link encap:Ethernet HWaddr 14:91:82:2A:76:7B
inet addr:81.99.132.253 Bcast:81.99.135.255 Mask:255.255.252.0
inet6 addr: fe80::1691:82ff:fe2a:767b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1793958 errors:0 dropped:0 overruns:0 frame:0
TX packets:643515 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2488471785 (2.3 GiB) TX bytes:98876713 (94.2 MiB)
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-62-00-50-E2-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
gretap0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1462 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
l2tp-vpnonline Link encap:Point-to-Point Protocol
inet addr:10.100.201.69 P-t-P:10.100.201.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1420 Metric:1
RX packets:6368 errors:0 dropped:0 overruns:0 frame:0
TX packets:4217 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3945564 (3.7 MiB) TX bytes:952068 (929.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:308 errors:0 dropped:0 overruns:0 frame:0
TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28135 (27.4 KiB) TX bytes:28135 (27.4 KiB)
wlan0 Link encap:Ethernet HWaddr 16:91:82:2A:76:7D
inet6 addr: fe80::1491:82ff:fe2a:767d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:276484 errors:0 dropped:0 overruns:0 frame:0
TX packets:1696678 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:42624818 (40.6 MiB) TX bytes:2246585043 (2.0 GiB)
wlan1 Link encap:Ethernet HWaddr 16:91:82:2A:76:7C
inet6 addr: fe80::1491:82ff:fe2a:767c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:109260 errors:0 dropped:0 overruns:0 frame:0
TX packets:108016 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23341754 (22.2 MiB) TX bytes:49535200 (47.2 MiB)

route -n

root@OpenWrt:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.100.201.254 0.0.0.0 UG 0 0 0 l2tp-vpnonline
10.100.201.254 0.0.0.0 255.255.255.255 UH 0 0 0 l2tp-vpnonline
81.99.132.0 0.0.0.0 255.255.252.0 U 0 0 0 eth1.2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan
195.201.220.59 81.99.132.1 255.255.255.255 UGH 0 0 0 eth1.2

2018-09-25 20:49:10

Cezary napisał/a:

Pokaż jaki masz konfig tego vpna.

To jest vpnonline a ustawialem tak jak :
https://vpnonline.pl/openwrt_pptp
Z tym że protokół L2TP.

Jezeli jest nieodpowiedni to będę musiał chyba poszukać innego.

Jak trzeba to zrobię screeny wszystkiego.

2018-09-25 20:37:33

Bardzo bym prosil o "poprowadzenie za reke" z tym problemem (jak dla mnie)
Juz musialem 2 razy instalowac openwrt na ruterze bo tak namieszalem.

2018-09-25 14:40:43

Cezary napisał/a:

vpn masz zrobiony tak że trasę domyślną masz przez vpn, więc cały ruch idzie przez vpn.
Nie rób trasy domyślnej przez vpn.

I tutaj chyba utknalem , dzieki za cierpliwosc do mnie.

Nie bardzo wiem co mam zrobić

2018-09-25 14:25:29

Dobra podszedlem na spokojnie do tego.
Mam polaczenie vpn (protokol L2TP) zrobilem zgodnie z poradnikiem : https://eko.one.pl/?p=openwrt-routing
i dodalem tylko jedno ip (dekodera)

jednak nadal caly ruch idzie przez vpn

Prosze o pomoc

2018-09-24 17:10:22

Poddaje sie , nie dam rady :-(

2018-09-24 15:27:47

Jak narazie to mam problem z tym :
Robie wedlug poradnika
https://vpnonline.pl/openwrt_pptp

ale mam taki log

Mon Sep 24 15:22:57 2018 daemon.info pppd[5801]: Plugin pptp.so loaded.
Mon Sep 24 15:22:57 2018 daemon.info pppd[5801]: PPTP plugin version 1.00
Mon Sep 24 15:22:57 2018 daemon.notice pppd[5801]: pppd 2.4.7 started by root, uid 0
Mon Sep 24 15:22:58 2018 kern.info kernel: [ 261.964610] pptp-vpnonline: renamed from ppp0
Mon Sep 24 15:22:58 2018 daemon.info pppd[5801]: Using interface pptp-vpnonline
Mon Sep 24 15:22:58 2018 daemon.notice pppd[5801]: Connect: pptp-vpnonline <--> pptp (pl01.vpnonline.eu)
Mon Sep 24 15:23:25 2018 daemon.info pppd[5634]: Closing PPTP connection
Mon Sep 24 15:23:28 2018 daemon.warn pppd[5801]: LCP: timeout sending Config-Requests
Mon Sep 24 15:23:28 2018 daemon.notice pppd[5801]: Connection terminated.
Mon Sep 24 15:23:28 2018 daemon.notice pppd[5801]: Modem hangup
Mon Sep 24 15:23:28 2018 daemon.info pppd[5801]: Exit.
Mon Sep 24 15:23:28 2018 daemon.notice netifd: Interface 'vpnonline' is now down
Mon Sep 24 15:23:28 2018 daemon.notice netifd: Interface 'vpnonline' is setting up now
Mon Sep 24 15:23:28 2018 daemon.info pppd[5983]: Plugin pptp.so loaded.
Mon Sep 24 15:23:28 2018 daemon.info pppd[5983]: PPTP plugin version 1.00
Mon Sep 24 15:23:28 2018 daemon.notice pppd[5983]: pppd 2.4.7 started by root, uid 0
Mon Sep 24 15:23:29 2018 kern.info kernel: [ 293.231643] pptp-vpnonline: renamed from ppp0
Mon Sep 24 15:23:29 2018 daemon.info pppd[5983]: Using interface pptp-vpnonline
Mon Sep 24 15:23:29 2018 daemon.notice pppd[5983]: Connect: pptp-vpnonline <--> pptp (pl01.vpnonline.eu)

dobra nie wazne zmienilem protokol i poszlo

teraz konfigi do wybranych ip bo jak narazie to wszystko idzie przez vpn

2018-09-24 11:07:28

Dzięki wielkie.
Po robocie siadam do lektury.
Mam nadzieję że mi się uda :-)

2018-09-24 10:59:07

Dzięki za pomoc. Ze wszystkim sobie poradziłem i teraz wiem co i jak.

Mam jeszcze jedno pytanie.

Chodziło by mi o postawienie clienta VPN do serwera vpnonline (lub jakikolwiek inny) na tym routerze i przekierowaniu go do ip mojego tunera.

2018-09-18 21:26:44

teraz jest

Status: Łączenie z 81.99.132.253:21...
Status: Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status: Niezabezpieczony serwer, nie obsługuje FTP przez TLS.
Status: Zalogowany
Status: Uzyskiwanie listy katalogów...
Status: Otrzymano nieprawidłową sekwencję znaków, wyłączanie UTF-8. Wybierz opcję UTF-8 w Menedżerze Stron, aby wymusić UTF-8.
Status: Listowanie katalogów w "/" zakończone pomyślnie

w pliku /etc/vsftpd_users/pawel
mialem tak :

dirlist_enable=yes
download_enable=yes
write_enable=yes

poprawilem na :

dirlist_enable=yes
dwnload_enable=yes
write_enable=yes

czy te spacje robia roznice ??
nie wiedzialem .
po tej zmianie log jak powyzej.
ale dziekuje za pomoc i cierpliwosc

a jeszcze jedno pytanko ,dlaczego przy probie zmiany hasla mam taki komunikat

root@OpenWrt:~# passwd pawel
Changing password for pawel
New password:
passwd: password for pawel is unchanged

2018-09-18 21:17:37

Ale dostaje taka odpowiedz przy probie logowania

Status: Łączenie z 81.99.132.253:21...
Status: Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status: Niezabezpieczony serwer, nie obsługuje FTP przez TLS.
Polecenie: USER pawel
Odpowiedź 331 Please specify the password.
Polecenie: PASS *********
Odpowiedź 500 OOPS: bad bool value in config file for: dirlist_enable
Błąd: Błąd krytyczny: Nie można połączyć się z serwerem

2018-09-18 20:18:04

Ok dziala jako "anonymous" z uzytkownikiem pawel - ktory ma miec mozliwosc zapisu i odczytu nie.
Jak teraz poprawnie dodac takiego uzytkownika

2018-09-18 17:24:34

To mi podesłał
https://imageshack.com/a/img921/2944/2ujL5x.jpg

2018-09-18 16:52:23

dzieki za pomoc, dam znac jak znajomy sprawdzi (jak wstanie )
ja smigam do wyrka (nocna zmiana)
odezwe sie jutro
pozdrawiam

2018-09-18 16:42:22

ok poprawione + usuniete
to teraz jakie namiary mam dac znajomemu zeby przetestowal polaczenie do ftp??

teraz w filezilla wpisalem dane do ftp i mam taki log

Status: Łączenie z 192.168.1.1:21...
Status: Połączenie nawiązanie, oczekiwanie na wiadomość powitalną...
Status: Niezabezpieczony serwer, nie obsługuje FTP przez TLS.
Polecenie: USER root
Odpowiedź 331 Please specify the password.
Polecenie: PASS *************
Odpowiedź 500 OOPS: vsftpd: refusing to run with writable root inside chroot()
Błąd: Błąd krytyczny: Nie można połączyć się z serwerem

2018-09-18 15:57:16

moun

root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/ubi0_1 on /overlay type ubifs (rw,noatime,ubi=0,vol=1)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
ubi1:syscfg on /tmp/syscfg type ubifs (rw,relatime,ubi=1,vol=0)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/sda1 on /mnt/usb type ext4 (rw,relatime,data=ordered)
root@OpenWrt:~#

cat /etc/passwd

root@OpenWrt:~# cat /etc/passwd
root:x:0:0:root:/root:/bin/ash
daemon:*:1:1:daemon:/var:/bin/false
ftp:x:55:55:ftp:/mnt/usd:/bin/false
network:*:101:101:network:/var:/bin/false
nobody:*:65534:65534:nobody:/var:/bin/false
dnsmasq:x:453:453:dnsmasq:/var/run/dnsmasq:/bin/false

pawel:x:1000:65534:pawel:/mnt/usb:/bin/false
pawel:x:1000:65534:pawel:/mnt/usb:/bin/false
root@OpenWrt:~#

cat /etc/vsftpd_users/ftp

root@OpenWrt:~# cat /etc/vsftpd_users/ftp
dirlist_enable=yes
download_enable=yes
write_enable=yes
anon_upload_enable=yes
anon_other_write_enable=yes
anon_mkdir_write_enable=yes
anon_umask=0000root@OpenWrt:~#

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 2 z 3)

Znalezione posty: 26 do 50 z 53

26 Odpowiedź przez krystiano.kris 2018-09-26 18:06:48

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

27 Odpowiedź przez krystiano.kris 2018-09-26 18:05:37

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

28 Odpowiedź przez krystiano.kris 2018-09-26 17:46:04

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

29 Odpowiedź przez krystiano.kris 2018-09-26 17:27:39

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

30 Odpowiedź przez krystiano.kris 2018-09-26 17:08:33

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

31 Odpowiedź przez krystiano.kris 2018-09-26 16:56:04

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

32 Odpowiedź przez krystiano.kris 2018-09-26 15:36:37

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

33 Odpowiedź przez krystiano.kris 2018-09-26 14:48:22

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

34 Odpowiedź przez krystiano.kris 2018-09-26 14:31:45

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

35 Odpowiedź przez krystiano.kris 2018-09-26 14:14:11

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

36 Odpowiedź przez krystiano.kris 2018-09-25 20:49:10

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

37 Odpowiedź przez krystiano.kris 2018-09-25 20:37:33

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

38 Odpowiedź przez krystiano.kris 2018-09-25 14:40:43

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

39 Odpowiedź przez krystiano.kris 2018-09-25 14:25:29

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

40 Odpowiedź przez krystiano.kris 2018-09-24 17:10:22

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

41 Odpowiedź przez krystiano.kris 2018-09-24 15:27:47

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

42 Odpowiedź przez krystiano.kris 2018-09-24 11:07:28

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

43 Odpowiedź przez krystiano.kris 2018-09-24 10:59:07

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

44 Odpowiedź przez krystiano.kris 2018-09-18 21:26:44

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

45 Odpowiedź przez krystiano.kris 2018-09-18 21:17:37

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

46 Odpowiedź przez krystiano.kris 2018-09-18 20:18:04

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

47 Odpowiedź przez krystiano.kris 2018-09-18 17:24:34

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

48 Odpowiedź przez krystiano.kris 2018-09-18 16:52:23

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

49 Odpowiedź przez krystiano.kris 2018-09-18 16:42:22

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

50 Odpowiedź przez krystiano.kris 2018-09-18 15:57:16

Odp: Ftp linksys wrt1900acs (67 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 26 do 50 z 53