FAQ o OpenWrt | Sprzedam różne routery | Oddam

2018-07-22 11:27:27

z automatu było 1500 ustawiłem recznie 1522 problem nie rozwiazany dalej.

edit: po wielu probach resetach i paru straconych wlosach zaczeło działać na takich ustawieniach firewalla

firewall.@defaults[0]=defaults
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='ACCEPT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].network='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].forward='ACCEPT'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].network='wan' 'wan6'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].forward='ACCEPT'
firewall.@zone[1].input='ACCEPT'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fc00::/6'
firewall.@rule[3].dest_ip='fc00::/6'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@rule[7]=rule
firewall.@rule[7].name='Allow-IPSec-ESP'
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].name='Allow-ISAKMP'
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'

czyli jesli w kazdym kierunku jest accept

jednakże na pozostałych urządzeniach działało przy ustawieniach domyślnych. Coś musi być z firewallem w takim razie.

edit2 podziałało chwile i znowu lezy

2018-07-20 09:08:10

Problem jest nawet po kablu. I 10 i mint live te same objawy

2018-07-17 06:32:35

Dzięki Cezary ale V4 jest na 7628 a w 17.01 są obrazy do 7620 obraz od c20 V1 (7620) zadziała na c20 V4 (7628)?

2018-07-16 21:31:35

firewall itp itd sprawdzone to nie to. z hot spota z telefonu dziala tez normalnie jak wyzej napisalem.
Odpalilem teraz linux live problem taki sam jak na win 10, problem wyglada na typowo sprzetowo-programowy.

karta wifi: wca9377
karta lan: Realtek RTL8168/8111

czy w 18.x az tak sie pozmieniało w stosunku do poprzednich wydań?

czy ktos dysponuje lede 17.x albo np 15.05 pod ten router?

2018-07-16 19:57:50

na oryginalnym sofcie dziala normalnie, na wdr3600 - LEDE 17.01.4 dziala normalnie, na 1043 v4 -LEDE 17.01.4 dziala normalnie, hotspot z telefonu działa normalnie.

Sprawa jest o tyle dziwna ze strony się otwierają bez problemu, w Messengerze można normalnie pisac. Nie można tylko załączyć w Messengerze plików, to samo w poczcie itp itd

I w/w problemy dotyczą tylko laptopa z win 10

2018-07-16 16:33:00

sprawdziłem ponownie na czystym:
OpenWrt 18.06.0-rc2 r7141-e4d0ee5af5 / LuCI openwrt-18.06 branch (git-18.196.56128-9112198)
efekt dokladnie taki sam.

Macie pomysł gdzie szukać powodu? system, karta wifi, samo openwrt?

2018-07-16 08:33:39

Witam

Mam problem z VLANami na windows 10.

Sprzęt TP-Link Archer C20 v4.
OpenWrt SNAPSHOT r7493-b123921 / LuCI Master (git-18.196.37553-f29b2a2)

Podzieliłem switcha, dodałem sekcje w firewallu, sieć działa na win XP i win 7.

na windows 10 problem jest następujący internet dziala, ALE dodanie jakiegokolwiek załącznika na messengerze facebookowym jest niemożliwe, dodanie załącznika do poczty przez przeglądarkę jest nie możliwe, załączenie pliku do np weetransfer jest nie możliwe, transfer FTP startuje ~90kb spada do 0 i błąd komunikacji, połączenie wychodzące RDP np działa normalnie.

uci show firewall

firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].forward='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='wan wan6 wan2 wanb'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fc00::/6'
firewall.@rule[3].dest_ip='fc00::/6'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@rule[7]=rule
firewall.@rule[7].name='Allow-IPSec-ESP'
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].name='Allow-ISAKMP'
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@zone[2]=zone
firewall.@zone[2].name='lan2'
firewall.@zone[2].input='ACCEPT'
firewall.@zone[2].forward='REJECT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].network='lan2'
firewall.@zone[3]=zone
firewall.@zone[3].name='lan3'
firewall.@zone[3].input='ACCEPT'
firewall.@zone[3].forward='REJECT'
firewall.@zone[3].output='ACCEPT'
firewall.@zone[3].network='lan3'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].dest='wan'
firewall.@forwarding[1].src='lan2'
firewall.@forwarding[2]=forwarding
firewall.@forwarding[2].dest='wan'
firewall.@forwarding[2].src='lan3'

uci show networki

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd42:12c4:eb9f::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.10.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ifname='eth0.3'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='b0:4e:26:0b:09:25'
network.wan=interface
network.wan.proto='dhcp'
network.wan.ifname='eth0.1'
network.wan.metric='1'
network.wan_dev=device
network.wan_dev.name='eth0.2'
network.wan_dev.macaddr='b0:4e:26:0b:09:26'
network.wan6=interface
network.wan6.proto='dhcpv6'
network.wan6.ifname='eth0.1'
network.wan6.reqaddress='try'
network.wan6.reqprefix='auto'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0 6t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='1 6t'
network.@switch_vlan[2]=switch_vlan
network.@switch_vlan[2].device='switch0'
network.@switch_vlan[2].ports='2 6t'
network.@switch_vlan[2].vlan='3'
network.@switch_vlan[3]=switch_vlan
network.@switch_vlan[3].device='switch0'
network.@switch_vlan[3].ports='3 6t'
network.@switch_vlan[3].vlan='4'
network.@switch_vlan[4]=switch_vlan
network.@switch_vlan[4].device='switch0'
network.@switch_vlan[4].ports='4 6t'
network.@switch_vlan[4].vlan='5'
network.lan2=interface
network.lan2.proto='static'
network.lan2.ipaddr='192.168.20.1'
network.lan2.netmask='255.255.255.0'
network.lan2.ifname='eth0.4'
network.lan3=interface
network.lan3.proto='static'
network.lan3.ipaddr='192.168.30.1'
network.lan3.netmask='255.255.255.0'
network.lan3.ifname='eth0.5'
network.wanb=interface
network.wanb.proto='dhcp'
network.wanb.ifname='eth0.2'
network.wanb.metric='2'

Sytuacja jest identyczna po wifi i po którymkolwiek VLANie. Spotkał się ktoś z takim problemem?

speedtest z xp/7: 30/6
speedtest z 10 : 30/0-0,2

telefony z androidem również działają prawidłowo

2018-02-19 16:40:29

A orientujesz się może jak bedzie wyglądać zasięg wifi w porównaniu z wymienionym tplinkiem używając tych samych anten?

2018-02-19 16:17:46

Witam

Jako że moja zabawa z w/w systemami trwa dalej ale brakuje mi wydajnego sprzętu (wr842nd v2 troszkę niedomaga) pomyślałem nad złożeniem czegoś z x86.

Tanie rozwiązanie to HP T5740, posiada port miniPCIE HALF i tu rodzą się pytania czy wbudowany karta sieciowa będzie działała oraz jaką kartę wifi zamontować? W orginale powinna tam siedzieć AR5BHB92 czy działa ona pod openWRT/LEDE stabilnie? Może ktoś z was ma coś sprawdzonego o w miare przyzwoitej mocy nadawczej?

Pozdrawiam

2017-05-26 11:54:46

iptables -v -L

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
  765 85982 delegate_input  all  --  any    any     anywhere             anywhere

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
 1239  171K delegate_forward  all  --  any    any     anywhere             anywhere

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
  741  168K delegate_output  all  --  any    any     anywhere             anywhere

Chain delegate_forward (1 references)
 pkts bytes target     prot opt in     out     source               destination
 1239  171K forwarding_rule  all  --  any    any     anywhere             anywhere             /* user chain for forwarding */
 1154  166K ACCEPT     all  --  any    any     anywhere             anywhere             ctstate RELATED,ESTABLISHED
    5   320 zone_lan_forward  all  --  br-lan any     anywhere             anywhere
    0     0 zone_wan_forward  all  --  eth0.1 any     anywhere             anywhere
    0     0 zone_wan_forward  all  --  usb0   any     anywhere             anywhere
   80  4762 zone_vlan_forward  all  --  eth0.3 any     anywhere             anywhere
    0     0 reject     all  --  any    any     anywhere             anywhere

Chain delegate_input (1 references)
 pkts bytes target     prot opt in     out     source               destination
    1    76 ACCEPT     all  --  lo     any     anywhere             anywhere
  764 85906 input_rule  all  --  any    any     anywhere             anywhere             /* user chain for input */
  617 67251 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate RELATED,ESTABLISHED
    4   208 syn_flood  tcp  --  any    any     anywhere             anywhere             tcp flags:FIN,SYN,RST,ACK/SYN
   46  5868 zone_lan_input  all  --  br-lan any     anywhere             anywhere
   33  4215 zone_wan_input  all  --  eth0.1 any     anywhere             anywhere
    0     0 zone_wan_input  all  --  usb0   any     anywhere             anywhere
   68  8572 zone_vlan_input  all  --  eth0.3 any     anywhere             anywhere

Chain delegate_output (1 references)
 pkts bytes target     prot opt in     out     source               destination
    1    76 ACCEPT     all  --  any    lo      anywhere             anywhere
  740  168K output_rule  all  --  any    any     anywhere             anywhere             /* user chain for output */
  707  162K ACCEPT     all  --  any    any     anywhere             anywhere             ctstate RELATED,ESTABLISHED
   15  3450 zone_lan_output  all  --  any    br-lan  anywhere             anywhere
   13   952 zone_wan_output  all  --  any    eth0.1  anywhere             anywhere
    0     0 zone_wan_output  all  --  any    usb0    anywhere             anywhere
    5  1378 zone_vlan_output  all  --  any    eth0.3  anywhere             anywhere

Chain forwarding_lan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain forwarding_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain forwarding_vlan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain forwarding_wan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain input_lan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain input_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain input_vlan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain input_wan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain output_lan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain output_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain output_vlan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain output_wan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain reject (7 references)
 pkts bytes target     prot opt in     out     source               destination
    2   193 REJECT     tcp  --  any    any     anywhere             anywhere             reject-with tcp-reset
   30  3990 REJECT     all  --  any    any     anywhere             anywhere             reject-with icmp-port-unreachable

Chain syn_flood (1 references)
 pkts bytes target     prot opt in     out     source               destination
    4   208 RETURN     tcp  --  any    any     anywhere             anywhere             tcp flags:FIN,SYN,RST,ACK/SYN limit: avg 25/sec burst 50
    0     0 DROP       all  --  any    any     anywhere             anywhere

Chain zone_lan_dest_ACCEPT (3 references)
 pkts bytes target     prot opt in     out     source               destination
   15  3450 ACCEPT     all  --  any    br-lan  anywhere             anywhere

Chain zone_lan_dest_REJECT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 reject     all  --  any    br-lan  anywhere             anywhere

Chain zone_lan_forward (1 references)
 pkts bytes target     prot opt in     out     source               destination
    5   320 forwarding_lan_rule  all  --  any    any     anywhere             anywhere             /* user chain for forwarding */
    5   320 zone_wan_dest_ACCEPT  all  --  any    any     anywhere             anywhere             /* forwarding lan -> wan */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port forwards */
    0     0 zone_lan_dest_REJECT  all  --  any    any     anywhere             anywhere

Chain zone_lan_input (1 references)
 pkts bytes target     prot opt in     out     source               destination
   46  5868 input_lan_rule  all  --  any    any     anywhere             anywhere             /* user chain for input */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port redirections */
   46  5868 zone_lan_src_ACCEPT  all  --  any    any     anywhere             anywhere

Chain zone_lan_output (1 references)
 pkts bytes target     prot opt in     out     source               destination
   15  3450 output_lan_rule  all  --  any    any     anywhere             anywhere             /* user chain for output */
   15  3450 zone_lan_dest_ACCEPT  all  --  any    any     anywhere             anywhere

Chain zone_lan_src_ACCEPT (1 references)
 pkts bytes target     prot opt in     out     source               destination
   46  5868 ACCEPT     all  --  br-lan any     anywhere             anywhere

Chain zone_vlan_dest_ACCEPT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    5  1378 ACCEPT     all  --  any    eth0.3  anywhere             anywhere

Chain zone_vlan_dest_REJECT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 reject     all  --  any    eth0.3  anywhere             anywhere

Chain zone_vlan_forward (1 references)
 pkts bytes target     prot opt in     out     source               destination
   80  4762 forwarding_vlan_rule  all  --  any    any     anywhere             anywhere             /* user chain for forwarding */
   80  4762 zone_wan_dest_ACCEPT  all  --  any    any     anywhere             anywhere             /* forwarding vlan -> wan */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port forwards */
    0     0 zone_vlan_dest_REJECT  all  --  any    any     anywhere             anywhere

Chain zone_vlan_input (1 references)
 pkts bytes target     prot opt in     out     source               destination
   68  8572 input_vlan_rule  all  --  any    any     anywhere             anywhere             /* user chain for input */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port redirections */
   68  8572 zone_vlan_src_ACCEPT  all  --  any    any     anywhere             anywhere

Chain zone_vlan_output (1 references)
 pkts bytes target     prot opt in     out     source               destination
    5  1378 output_vlan_rule  all  --  any    any     anywhere             anywhere             /* user chain for output */
    5  1378 zone_vlan_dest_ACCEPT  all  --  any    any     anywhere             anywhere

Chain zone_vlan_src_ACCEPT (1 references)
 pkts bytes target     prot opt in     out     source               destination
   68  8572 ACCEPT     all  --  eth0.3 any     anywhere             anywhere

Chain zone_wan_dest_ACCEPT (3 references)
 pkts bytes target     prot opt in     out     source               destination
   98  6034 ACCEPT     all  --  any    eth0.1  anywhere             anywhere
    0     0 ACCEPT     all  --  any    usb0    anywhere             anywhere

Chain zone_wan_dest_REJECT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 reject     all  --  any    eth0.1  anywhere             anywhere
    0     0 reject     all  --  any    usb0    anywhere             anywhere

Chain zone_wan_forward (2 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 forwarding_wan_rule  all  --  any    any     anywhere             anywhere             /* user chain for forwarding */
    0     0 zone_lan_dest_ACCEPT  esp  --  any    any     anywhere             anywhere             /* @rule[7] */
    0     0 zone_lan_dest_ACCEPT  udp  --  any    any     anywhere             anywhere             udp dpt:isakmp /* @rule[8] */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port forwards */
    0     0 zone_wan_dest_REJECT  all  --  any    any     anywhere             anywhere

Chain zone_wan_input (2 references)
 pkts bytes target     prot opt in     out     source               destination
   33  4215 input_wan_rule  all  --  any    any     anywhere             anywhere             /* user chain for input */
    0     0 ACCEPT     udp  --  any    any     anywhere             anywhere             udp dpt:bootpc /* Allow-DHCP-Renew */
    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere             icmp echo-request /* Allow-Ping */
    1    32 ACCEPT     igmp --  any    any     anywhere             anywhere             /* Allow-IGMP */
    0     0 ACCEPT     all  --  any    any     anywhere             anywhere             ctstate DNAT /* Accept port redirections */
   32  4183 zone_wan_src_REJECT  all  --  any    any     anywhere             anywhere

Chain zone_wan_output (2 references)
 pkts bytes target     prot opt in     out     source               destination
   13   952 output_wan_rule  all  --  any    any     anywhere             anywhere             /* user chain for output */
   13   952 zone_wan_dest_ACCEPT  all  --  any    any     anywhere             anywhere

Chain zone_wan_src_REJECT (1 references)
 pkts bytes target     prot opt in     out     source               destination
   32  4183 reject     all  --  eth0.1 any     anywhere             anywhere
    0     0 reject     all  --  usb0   any     anywhere             anywhere

iptables -v -L -t nat

Chain PREROUTING (policy ACCEPT 235 packets, 46044 bytes)
 pkts bytes target     prot opt in     out     source               destination
  235 46044 delegate_prerouting  all  --  any    any     anywhere             anywhere

Chain INPUT (policy ACCEPT 10 packets, 1291 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 23 packets, 2778 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain POSTROUTING (policy ACCEPT 7 packets, 1562 bytes)
 pkts bytes target     prot opt in     out     source               destination
  116  8354 delegate_postrouting  all  --  any    any     anywhere             anywhere

Chain delegate_postrouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
  116  8354 postrouting_rule  all  --  any    any     anywhere             anywhere             /* user chain for postrouting */
    2   332 zone_lan_postrouting  all  --  any    br-lan  anywhere             anywhere
  109  6792 zone_wan_postrouting  all  --  any    eth0.1  anywhere             anywhere
    0     0 zone_wan_postrouting  all  --  any    usb0    anywhere             anywhere
    5  1230 zone_vlan_postrouting  all  --  any    eth0.3  anywhere             anywhere

Chain delegate_prerouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
  235 46044 prerouting_rule  all  --  any    any     anywhere             anywhere             /* user chain for prerouting */
    5   320 zone_lan_prerouting  all  --  br-lan any     anywhere             anywhere
   48  5899 zone_wan_prerouting  all  --  eth0.1 any     anywhere             anywhere
    0     0 zone_wan_prerouting  all  --  usb0   any     anywhere             anywhere
  182 39825 zone_vlan_prerouting  all  --  eth0.3 any     anywhere             anywhere

Chain postrouting_lan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain postrouting_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain postrouting_vlan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain postrouting_wan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain prerouting_lan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain prerouting_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain prerouting_vlan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain prerouting_wan_rule (1 references)
 pkts bytes target     prot opt in     out     source               destination

Chain zone_lan_postrouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
    2   332 postrouting_lan_rule  all  --  any    any     anywhere             anywhere             /* user chain for postrouting */

Chain zone_lan_prerouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
    5   320 prerouting_lan_rule  all  --  any    any     anywhere             anywhere             /* user chain for prerouting */

Chain zone_vlan_postrouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
    5  1230 postrouting_vlan_rule  all  --  any    any     anywhere             anywhere             /* user chain for postrouting */

Chain zone_vlan_prerouting (1 references)
 pkts bytes target     prot opt in     out     source               destination
  182 39825 prerouting_vlan_rule  all  --  any    any     anywhere             anywhere             /* user chain for prerouting */

Chain zone_wan_postrouting (2 references)
 pkts bytes target     prot opt in     out     source               destination
  109  6792 postrouting_wan_rule  all  --  any    any     anywhere             anywhere             /* user chain for postrouting */
  109  6792 MASQUERADE  all  --  any    any     anywhere             anywhere

Chain zone_wan_prerouting (2 references)
 pkts bytes target     prot opt in     out     source               destination
   48  5899 prerouting_wan_rule  all  --  any    any     anywhere             anywhere             /* user chain for prerouting */

edit:

nie udało mi się wymusić separacji więc rozwiązałem problem za pomocą IPTABLES
iptables -I FORWARD -s 192.168.100.1/24 -d 192.168.10.0/24 -j DROP

2017-05-26 11:48:47

ping , dostep do samby w lan, teraz jeszcze sprawdziłem RDP tez dziala

2017-05-26 11:43:53

ze wzgledu na to że nie działa tak jak powinno utworzyłem konfiguracje na nowo dlatego guest nie Guest . wszystko małymi żeby wykluczyc literówki
zatem:
uci show network:

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fdc8:3f78:d552::/48'
network.lan=interface
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ipaddr='192.168.2.1'
network.lan._orig_ifname='eth0.1 wlan0'
network.lan._orig_bridge='true'
network.lan.ifname='eth0.2'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].vid='1'
network.@switch_vlan[0].ports='4 5t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].vid='2'
network.@switch_vlan[1].ports='1 2 5t'
network.wan=interface
network.wan.proto='dhcp'
network.wan.dns='8.8.8.8 8.8.4.4'
network.wan.peerdns='0'
network.wan._orig_ifname='eth0.2'
network.wan._orig_bridge='false'
network.wan.ifname='eth0.1'
network.modem=interface
network.modem.proto='dhcp'
network.modem.ifname='usb0'
network.@switch_vlan[2]=switch_vlan
network.@switch_vlan[2].device='switch0'
network.@switch_vlan[2].vlan='3'
network.@switch_vlan[2].vid='3'
network.@switch_vlan[2].ports='3 5t'
network.guest=interface
network.guest.proto='static'
network.guest.ifname='eth0.3'
network.guest.ipaddr='192.168.10.1'
network.guest.netmask='255.255.255.0'
network.guest.dns='194.204.152.34 8.8.8.8'

uci show firewall

firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[0].forward='REJECT'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='wan wan6 modem'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fe80::/10'
firewall.@rule[3].src_port='547'
firewall.@rule[3].dest_ip='fe80::/10'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[7]=rule
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@zone[2]=zone
firewall.@zone[2].name='vlan'
firewall.@zone[2].input='ACCEPT'
firewall.@zone[2].forward='REJECT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].network='guest'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].dest='wan'
firewall.@forwarding[1].src='vlan'

lan widzi podsieć wan i guest
guest widzi podsiec wan i lan

probowałem też zgodnie ze strona:
https://wiki.openwrt.org/doc/recipes/guest-wlan
zrobic punkt 4c
ale wtedy lan widzi guest i wan
guest nie widzi nawet samego siebie

uci show firewall

firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[0].forward='REJECT'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='wan wan6 modem'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fe80::/10'
firewall.@rule[3].src_port='547'
firewall.@rule[3].dest_ip='fe80::/10'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[7]=rule
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@zone[2]=zone
firewall.@zone[2].name='guest'
firewall.@zone[2].network='guest'
firewall.@zone[2].forward='REJECT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].input='REJECT'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].src='guest'
firewall.@forwarding[1].dest='wan'
firewall.@rule[9]=rule
firewall.@rule[9].src='guest'
firewall.@rule[9].src_port='67-68'
firewall.@rule[9].dest_port='67-68'
firewall.@rule[9].proto='udp'
firewall.@rule[9].target='ACCEPT'
firewall.@rule[9].name='Allow DHCP request'
firewall.@rule[10]=rule
firewall.@rule[10].src='guest'
firewall.@rule[10].dest_port='53'
firewall.@rule[10].proto='tcpudp'
firewall.@rule[10].target='ACCEPT'
firewall.@rule[10].name='Allow DNS Queries'
firewall.@rule[11]=rule
firewall.@rule[11].src='guest'
firewall.@rule[11].dest='lan'
firewall.@rule[11].name='Deny Guest -> LAN'
firewall.@rule[11].proto='all'
firewall.@rule[11].target='DROP'
firewall.@rule[12]=rule
firewall.@rule[12].target='ACCEPT'
firewall.@rule[12].src='guest'
firewall.@rule[12].dest='wan'
firewall.@rule[12].name='Allow Guest -> WAN http'
firewall.@rule[12].proto='tcp'
firewall.@rule[12].dest_port='80'
firewall.@rule[13]=rule
firewall.@rule[13].target='ACCEPT'
firewall.@rule[13].src='guest'
firewall.@rule[13].dest='wan'
firewall.@rule[13].name='Allow Guest -> WAN https'
firewall.@rule[13].proto='tcp'
firewall.@rule[13].dest_port='443'
firewall.@rule[14]=rule
firewall.@rule[14].src='guest'
firewall.@rule[14].dest='wan'
firewall.@rule[14].name='Deny Guest -> WAN'
firewall.@rule[14].proto='all'
firewall.@rule[14].target='DROP'

2017-05-26 11:29:46

uci show firewall

firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='REJECT'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].forward='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].forward='REJECT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='wan wan6 modem'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src='lan'
firewall.@forwarding[0].dest='wan'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fe80::/10'
firewall.@rule[3].src_port='547'
firewall.@rule[3].dest_ip='fe80::/10'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[7]=rule
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@zone[2]=zone
firewall.@zone[2].name='vlan'
firewall.@zone[2].input='ACCEPT'
firewall.@zone[2].forward='REJECT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].network='guest'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].dest='wan'
firewall.@forwarding[1].src='vlan'

LAN widzi Guest i podsieć w WAN
Guest widzi LAN i podsieć w WAN

2017-05-26 10:01:27

uci show network

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fde8:0272:bc53::/48'
network.lan=interface
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ipaddr='192.168.2.1'
network.lan._orig_ifname='eth0.1 wlan0'
network.lan._orig_bridge='true'
network.lan.ifname='eth0.2'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='4 5t'
network.@switch_vlan[0].vid='1'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='1 2 5t'
network.@switch_vlan[1].vid='2'
network.wan=interface
network.wan.proto='dhcp'
network.wan.dns='8.8.8.8 8.8.4.4'
network.wan.peerdns='0'
network.wan._orig_ifname='eth0.2'
network.wan._orig_bridge='false'
network.wan.ifname='eth0.1'
network.modem=interface
network.modem.proto='dhcp'
network.modem.ifname='usb0'
network.@switch_vlan[2]=switch_vlan
network.@switch_vlan[2].device='switch0'
network.@switch_vlan[2].vlan='3'
network.@switch_vlan[2].vid='3'
network.@switch_vlan[2].ports='3 5t'
network.Guest=interface
network.Guest.proto='static'
network.Guest.ifname='eth0.3'
network.Guest.ipaddr='192.168.10.1'
network.Guest.netmask='255.255.255.0'
network.Guest.dns='8.8.8.8 194.204.152.34'

uci show firewall

firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood='1'
firewall.@defaults[0].input='ACCEPT'
firewall.@defaults[0].output='ACCEPT'
firewall.@defaults[0].forward='DROP'
firewall.@zone[0]=zone
firewall.@zone[0].name='lan'
firewall.@zone[0].input='ACCEPT'
firewall.@zone[0].output='ACCEPT'
firewall.@zone[0].network='lan'
firewall.@zone[0].forward='DROP'
firewall.@zone[1]=zone
firewall.@zone[1].name='wan'
firewall.@zone[1].input='REJECT'
firewall.@zone[1].output='ACCEPT'
firewall.@zone[1].masq='1'
firewall.@zone[1].mtu_fix='1'
firewall.@zone[1].network='wan wan6 modem'
firewall.@zone[1].forward='DROP'
firewall.@rule[0]=rule
firewall.@rule[0].name='Allow-DHCP-Renew'
firewall.@rule[0].src='wan'
firewall.@rule[0].proto='udp'
firewall.@rule[0].dest_port='68'
firewall.@rule[0].target='ACCEPT'
firewall.@rule[0].family='ipv4'
firewall.@rule[1]=rule
firewall.@rule[1].name='Allow-Ping'
firewall.@rule[1].src='wan'
firewall.@rule[1].proto='icmp'
firewall.@rule[1].icmp_type='echo-request'
firewall.@rule[1].family='ipv4'
firewall.@rule[1].target='ACCEPT'
firewall.@rule[2]=rule
firewall.@rule[2].name='Allow-IGMP'
firewall.@rule[2].src='wan'
firewall.@rule[2].proto='igmp'
firewall.@rule[2].family='ipv4'
firewall.@rule[2].target='ACCEPT'
firewall.@rule[3]=rule
firewall.@rule[3].name='Allow-DHCPv6'
firewall.@rule[3].src='wan'
firewall.@rule[3].proto='udp'
firewall.@rule[3].src_ip='fe80::/10'
firewall.@rule[3].src_port='547'
firewall.@rule[3].dest_ip='fe80::/10'
firewall.@rule[3].dest_port='546'
firewall.@rule[3].family='ipv6'
firewall.@rule[3].target='ACCEPT'
firewall.@rule[4]=rule
firewall.@rule[4].name='Allow-MLD'
firewall.@rule[4].src='wan'
firewall.@rule[4].proto='icmp'
firewall.@rule[4].src_ip='fe80::/10'
firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0'
firewall.@rule[4].family='ipv6'
firewall.@rule[4].target='ACCEPT'
firewall.@rule[5]=rule
firewall.@rule[5].name='Allow-ICMPv6-Input'
firewall.@rule[5].src='wan'
firewall.@rule[5].proto='icmp'
firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement'
firewall.@rule[5].limit='1000/sec'
firewall.@rule[5].family='ipv6'
firewall.@rule[5].target='ACCEPT'
firewall.@rule[6]=rule
firewall.@rule[6].name='Allow-ICMPv6-Forward'
firewall.@rule[6].src='wan'
firewall.@rule[6].dest='*'
firewall.@rule[6].proto='icmp'
firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type'
firewall.@rule[6].limit='1000/sec'
firewall.@rule[6].family='ipv6'
firewall.@rule[6].target='ACCEPT'
firewall.@include[0]=include
firewall.@include[0].path='/etc/firewall.user'
firewall.@rule[7]=rule
firewall.@rule[7].src='wan'
firewall.@rule[7].dest='lan'
firewall.@rule[7].proto='esp'
firewall.@rule[7].target='ACCEPT'
firewall.@rule[8]=rule
firewall.@rule[8].src='wan'
firewall.@rule[8].dest='lan'
firewall.@rule[8].dest_port='500'
firewall.@rule[8].proto='udp'
firewall.@rule[8].target='ACCEPT'
firewall.@zone[2]=zone
firewall.@zone[2].input='ACCEPT'
firewall.@zone[2].output='ACCEPT'
firewall.@zone[2].name='VLAN'
firewall.@zone[2].network='VLAN Guest'
firewall.@zone[2].forward='DROP'
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].dest='wan'
firewall.@forwarding[0].src='VLAN'
firewall.@forwarding[1]=forwarding
firewall.@forwarding[1].dest='wan'
firewall.@forwarding[1].src='lan'

2017-05-25 15:15:08

Witam

Mam pytanie odnośnie w/w sprzętu.

Utworzyłem 2 VLANy, każdy z własną strefą firewalla, 1 VLAN podsieć 192.168.0.1 2 VLAN podsieć 192.168.10.1/ W konfiguracji Switcha dla 1 VLANa przydzieliłem 2 porty dla 2 VLANa 1 port. W jakis sposób utworzyć separacje miedzy nimi?
Na te chwile oba VLANy widzą siebie nawzajem co troche wyklucza funkcjonalność VLAN.

Całą konfiguracje wykonałem przez luci jeśli trzeba coś dopisać przez ssh prosiłbym o pomoc.

Pozdrawiam

2017-03-17 10:17:33

ok zaktualizowałem jedno z rządzeń ALE powrócił ADSL w zamian zniknął WAN DSL jakiś pomysł ktoś ma jak to ustrojstwo przekofigurować?

EDIT:

dobra sprawa załatwiona przeniosełem /etc/config/network z orginały wszystko działa dziękuję bardzo

2017-03-16 14:59:06

ok a softy w postaci bin do upgradu ktoś gdzies widzial?

2017-03-15 17:52:14

Tak sie składa że również jestem "Szczęśliwym" posiadaczem kilku sztuk tego sprzętu. Ten plik ".image" jak sie wgrywa?

2016-11-23 17:11:42

po restarcie i wykoaniu :
mount /dev/sda1 /overlay

mount:

root@OpenWrt:~# mount /dev/sda1 /overlay
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/sda1 on /overlay type ext4 (rw,relatime,data=ordered)
root@OpenWrt:~#

logread:

root@OpenWrt:~# logread
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 0.790000] 0x000000670000-0x0000007f0000 : "rootfs_data"
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 0.800000] 0x0000007f0000-0x000000800000 : "art"
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 0.800000] 0x000000020000-0x0000007f0000 : "firmware"
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 0.830000] libphy: ag71xx_mdio: probed
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 1.420000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 1.430000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.020000] ag71xx-mdio.1: Found an AR934X built-in switch
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.060000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.070000] TCP: cubic registered
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.070000] NET: Registered protocol family 17
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.080000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 2.090000] Bridge firewalling registered
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.090000] 8021q: 802.1Q VLAN Support v1.8
Wed Nov 23 17:01:16 2016 kern.err kernel: [ 2.100000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.110000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 2.120000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Wed Nov 23 17:01:16 2016 user.info kernel: [ 3.390000] init: Console is alive
Wed Nov 23 17:01:16 2016 user.info kernel: [ 3.400000] init: - watchdog -
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.520000] usbcore: registered new interface driver usbfs
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.530000] usbcore: registered new interface driver hub
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.530000] usbcore: registered new device driver usb
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 5.580000] SCSI subsystem initialized
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.600000] ehci-platform: EHCI generic platform driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.610000] ehci-platform ehci-platform: EHCI Host Controller
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.620000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.630000] ehci-platform ehci-platform: TX-TX IDP fix enabled
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.630000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.660000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.660000] hub 1-0:1.0: USB hub found
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.670000] hub 1-0:1.0: 1 port detected
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.680000] ohci-platform: OHCI generic platform driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 5.690000] usbcore: registered new interface driver usb-storage
Wed Nov 23 17:01:16 2016 user.info kernel: [ 6.420000] init: - preinit -
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 7.070000] random: procd urandom read with 11 bits of entropy available
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 8.650000] eth1: link up (1000Mbps/Full duplex)
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 9.410000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 9.600000] usb-storage 1-1:1.0: USB Mass Storage device detected
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 9.610000] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 9.610000] scsi host0: usb-storage 1-1:1.0
Wed Nov 23 17:01:16 2016 user.info kernel: [ 10.380000] mount_root: loading kmods from internal overlay
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 10.670000] jffs2: notice: (401) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 23 17:01:16 2016 user.info kernel: [ 10.690000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 10.700000] scsi 0:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Wed Nov 23 17:01:16 2016 user.info kernel: [ 10.710000] block: extroot: device not present, retrying in 5 seconds
Wed Nov 23 17:01:16 2016 user.err kernel: [ 15.720000] block: extroot: cannot find device with UUID d2b644dc-92eb-40d9-8349-9c943a3b81fd
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 15.760000] usb 1-1: USB disconnect, device number 2
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 15.790000] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 23 17:01:16 2016 user.info kernel: [ 15.950000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Wed Nov 23 17:01:16 2016 user.info kernel: [ 15.960000] block: extroot: device not present, retrying in 5 seconds
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 16.220000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 16.410000] usb-storage 1-1:1.2: USB Mass Storage device detected
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 16.420000] scsi host1: usb-storage 1-1:1.2
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 17.420000] scsi 1:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 17.430000] scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 17.440000] sd 1:0:0:1: [sda] Attached SCSI removable disk
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 20.970000] sd 1:0:0:1: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Wed Nov 23 17:01:16 2016 kern.notice kernel: [ 20.980000] sd 1:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 21.080000] sda: sda1 sda2
Wed Nov 23 17:01:16 2016 user.err kernel: [ 21.090000] block: extroot: cannot find device with UUID d2b644dc-92eb-40d9-8349-9c943a3b81fd
Wed Nov 23 17:01:16 2016 user.info kernel: [ 21.100000] mount_root: switching to jffs2 overlay
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 21.130000] eth1: link down
Wed Nov 23 17:01:16 2016 user.info kernel: [ 21.150000] procd: - early -
Wed Nov 23 17:01:16 2016 user.info kernel: [ 21.150000] procd: - watchdog -
Wed Nov 23 17:01:16 2016 user.info kernel: [ 22.050000] procd: - ubus -
Wed Nov 23 17:01:16 2016 user.info kernel: [ 23.080000] procd: - init -
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 24.750000] sda: sda1 sda2
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.070000] Adding 389628k swap on /dev/sda2. Priority:-1 extents:1 across:389628k
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.740000] NET: Registered protocol family 10
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.780000] gre: GRE over IPv4 demultiplexor driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.790000] ip_gre: GRE over IPv4 tunneling driver
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.810000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.850000] u32 classifier
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.850000] input device check on
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.860000] Actions configured
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.860000] Mirror/redirect action on
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.920000] fuse init (API version 7.23)
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.940000] usbcore: registered new interface driver cdc_acm
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.950000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.960000] usbcore: registered new interface driver cdc_wdm
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.970000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.980000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 25.990000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.020000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.070000] usbcore: registered new interface driver usblp
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.090000] usbcore: registered new interface driver usbserial
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.100000] usbcore: registered new interface driver usbserial_generic
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.100000] usbserial: USB Serial support registered for generic
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.180000] xt_time: kernel timezone is -0000
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.190000] cdc_ether 1-1:1.0 usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 36:4b:50:b7:ef:2d
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.210000] usbcore: registered new interface driver cdc_ether
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.230000] usbcore: registered new interface driver cdc_ncm
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.290000] usbcore: registered new interface driver huawei_cdc_ncm
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.380000] PPP generic driver version 2.4.2
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.390000] PPP MPPE Compression module registered
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.390000] NET: Registered protocol family 24
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.400000] PPTP driver version 0.8.5
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.410000] usbcore: registered new interface driver qmi_wwan
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.420000] usbcore: registered new interface driver rndis_host
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.440000] usbcore: registered new interface driver sierra
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.450000] usbserial: USB Serial support registered for Sierra USB modem
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.460000] usbcore: registered new interface driver sierra_net
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.550000] usbcore: registered new interface driver cdc_mbim
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.590000] usbcore: registered new interface driver option
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.590000] usbserial: USB Serial support registered for GSM modem (1-port)
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.730000] usbcore: registered new interface driver qcserial
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.730000] usbserial: USB Serial support registered for Qualcomm USB modem
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: EEPROM regdomain: 0x0
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: EEPROM indicates default country code should be used
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: doing EEPROM country->regdmn map search
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: country maps to regdmn code: 0x3a
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: Country alpha2 being used: US
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.760000] ath: Regpair used: 0x3a
Wed Nov 23 17:01:16 2016 kern.debug kernel: [ 26.780000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Nov 23 17:01:16 2016 kern.info kernel: [ 26.780000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Wed Nov 23 17:01:18 2016 user.emerg syslog: 'radio0' is disabled
Wed Nov 23 17:01:18 2016 user.emerg syslog: 'radio0' is disabled
Wed Nov 23 17:01:20 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Wed Nov 23 17:01:20 2016 kern.notice kernel: [ 32.830000] random: nonblocking pool is initialized
Wed Nov 23 17:01:20 2016 daemon.err block: /dev/mtdblock3 is already mounted
Wed Nov 23 17:01:21 2016 authpriv.info dropbear[1337]: Not backgrounding
Wed Nov 23 17:01:26 2016 kern.info kernel: [ 39.310000] device eth1 entered promiscuous mode
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'lan' is enabled
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 23 17:01:26 2016 kern.info kernel: [ 39.340000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'loopback' is enabled
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'loopback' is now up
Wed Nov 23 17:01:26 2016 daemon.notice netifd: Interface 'wan' is enabled
Wed Nov 23 17:01:26 2016 kern.err kernel: [ 39.380000] cdc_ether 1-1:1.0 usb0: kevent 12 may have been dropped
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Interface 'wan6' is enabled
Wed Nov 23 17:01:27 2016 kern.info kernel: [ 39.410000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Network device 'lo' link is up
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Network device 'usb0' link is up
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Interface 'wan' has link connectivity
Wed Nov 23 17:01:27 2016 daemon.notice netifd: Interface 'wan' is setting up now
Wed Nov 23 17:01:28 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Nov 23 17:01:28 2016 daemon.notice netifd: wan (1733): udhcpc (v1.23.2) started
Wed Nov 23 17:01:29 2016 kern.info kernel: [ 41.410000] eth1: link up (1000Mbps/Full duplex)
Wed Nov 23 17:01:29 2016 kern.info kernel: [ 41.410000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 17:01:29 2016 kern.info kernel: [ 41.420000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 17:01:29 2016 daemon.notice netifd: Network device 'eth1' link is up
Wed Nov 23 17:01:29 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Nov 23 17:01:29 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Nov 23 17:01:29 2016 kern.info kernel: [ 41.470000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Nov 23 17:01:29 2016 daemon.notice netifd: wan (1733): Sending discover...
Wed Nov 23 17:01:29 2016 daemon.notice netifd: wan (1733): Sending select for 192.168.3.182...
Wed Nov 23 17:01:29 2016 daemon.notice netifd: wan (1733): Lease of 192.168.3.182 obtained, lease time 86400
Wed Nov 23 17:01:29 2016 daemon.warn odhcpd[1294]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 17:01:30 2016 daemon.notice netifd: Interface 'wan' is now up
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led WAN
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led LAN1
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led LAN2
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led LAN3
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led LAN4
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led WLAN
Wed Nov 23 17:01:30 2016 user.emerg syslog: setting up led USB
Wed Nov 23 17:01:31 2016 kern.info kernel: [ 43.420000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 17:01:31 2016 daemon.info procd: - init complete -
Wed Nov 23 17:01:31 2016 daemon.warn odhcpd[1294]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 17:01:31 2016 daemon.warn odhcpd[1294]: DHCPV6 REQUEST IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 17:01:34 2016 authpriv.info dropbear[1851]: Child connection from 192.168.1.11:53101
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: started, version 2.73 cachesize 150
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: DNS service limited to local subnets
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq-dhcp[1849]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: using local addresses only for domain lan
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: reading /tmp/resolv.conf.auto
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: using local addresses only for domain lan
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: using nameserver 192.168.3.1#53
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: read /etc/hosts - 1 addresses
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: read /tmp/hosts/dhcp - 1 addresses
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq[1849]: read /tmp/hosts/odhcpd - 1 addresses
Wed Nov 23 17:01:35 2016 daemon.info dnsmasq-dhcp[1849]: read /etc/ethers - 0 addresses
Wed Nov 23 17:08:52 2016 user.notice firewall: Reloading firewall due to ifup of wan (usb0)
Wed Nov 23 17:08:55 2016 user.notice ddns-scripts[2081]: myddns_ipv4: PID '2081' started at 2016-11-23 17:08
Wed Nov 23 17:08:56 2016 user.warn ddns-scripts[2081]: myddns_ipv4: Service section disabled! - TERMINATE
Wed Nov 23 17:08:56 2016 user.warn ddns-scripts[2081]: myddns_ipv4: PID '2081' exit WITH ERROR '1' at 2016-11-23 17:08
Wed Nov 23 17:08:59 2016 authpriv.warn dropbear[1851]: Bad password attempt for 'root' from 192.168.1.11:53101
Wed Nov 23 17:09:01 2016 authpriv.notice dropbear[1851]: Password auth succeeded for 'root' from 192.168.1.11:53101
Wed Nov 23 17:09:16 2016 kern.err kernel: [ 77.270000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Wed Nov 23 17:09:16 2016 kern.err kernel: [ 77.280000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
Wed Nov 23 17:09:16 2016 kern.info kernel: [ 77.380000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

sda1 jest widoczna jako overlay ale do następnego restartu

Końcowe Napisy oznaczją że SDA1 nie moe być EXT4?

2016-11-23 16:55:50

czysty soft

mount:

 ----------------------------------------------------------------
 | Machine: TP-Link TL-WR842N/ND v2                             |
 | Uptime: 0d, 00:02:02                                         |
 | Load: 1.92 0.80 0.30                                         |
 | Flash: total: 1.5MB, free: 1.3MB, used: 17%                  |
 | Memory: total: 27.8MB, free: 11.9MB, used: 57%               |
 | WAN:                                                         |
 | LAN: 192.168.1.1                                             |
 ----------------------------------------------------------------
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)

logread:

 
root@OpenWrt:~# logread
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.600000] NET: Registered protocol family 1
Fri Nov 11 13:58:35 2016 kern.debug kernel: [    0.610000] PCI: CLS 0 bytes, default 32
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.620000] futex hash table entries: 256 (order: -1, 3072 bytes)
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.640000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.650000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.660000] msgmni has been set to 55
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.660000] io scheduler noop registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.670000] io scheduler deadline registered (default)
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.670000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.680000] console [ttyS0] disabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.710000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.710000] console [ttyS0] enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.720000] bootconsole [early0] disabled
Fri Nov 11 13:58:35 2016 kern.warn kernel: [    0.740000] m25p80 spi0.0: found s25fl064k, expected m25p80
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.740000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.750000] 5 tp-link partitions found on MTD device spi0.0
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.750000] Creating 5 MTD partitions on "spi0.0":
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.760000] 0x000000000000-0x000000020000 : "u-boot"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.770000] 0x000000020000-0x0000001467e8 : "kernel"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.770000] 0x0000001467e8-0x0000007f0000 : "rootfs"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.780000] mtd: device 2 (rootfs) set to be root filesystem
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.780000] 1 squashfs-split partitions found on MTD device rootfs
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.790000] 0x000000670000-0x0000007f0000 : "rootfs_data"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.800000] 0x0000007f0000-0x000000800000 : "art"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    0.800000] 0x000000020000-0x0000007f0000 : "firmware"
Fri Nov 11 13:58:35 2016 kern.info kernel: [    0.830000] libphy: ag71xx_mdio: probed
Fri Nov 11 13:58:35 2016 kern.info kernel: [    1.420000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Fri Nov 11 13:58:35 2016 kern.info kernel: [    1.430000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.020000] ag71xx-mdio.1: Found an AR934X built-in switch
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.060000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.070000] TCP: cubic registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.070000] NET: Registered protocol family 17
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.080000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    2.090000] Bridge firewalling registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.090000] 8021q: 802.1Q VLAN Support v1.8
Fri Nov 11 13:58:35 2016 kern.err kernel: [    2.100000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.110000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Fri Nov 11 13:58:35 2016 kern.info kernel: [    2.120000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Fri Nov 11 13:58:35 2016 user.info kernel: [    3.400000] init: Console is alive
Fri Nov 11 13:58:35 2016 user.info kernel: [    3.400000] init: - watchdog -
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.520000] usbcore: registered new interface driver usbfs
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.520000] usbcore: registered new interface driver hub
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.530000] usbcore: registered new device driver usb
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    5.590000] SCSI subsystem initialized
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.610000] ehci-platform: EHCI generic platform driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.610000] ehci-platform ehci-platform: EHCI Host Controller
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.620000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.630000] ehci-platform ehci-platform: TX-TX IDP fix enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.640000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.660000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.660000] hub 1-0:1.0: USB hub found
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.670000] hub 1-0:1.0: 1 port detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.680000] ohci-platform: OHCI generic platform driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [    5.690000] usbcore: registered new interface driver usb-storage
Fri Nov 11 13:58:35 2016 user.info kernel: [    6.420000] init: - preinit -
Fri Nov 11 13:58:35 2016 kern.notice kernel: [    7.070000] random: procd urandom read with 11 bits of entropy available
Fri Nov 11 13:58:35 2016 kern.info kernel: [    8.650000] eth1: link up (1000Mbps/Full duplex)
Fri Nov 11 13:58:35 2016 kern.info kernel: [    9.420000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Fri Nov 11 13:58:35 2016 kern.info kernel: [    9.610000] usb-storage 1-1:1.0: USB Mass Storage device detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [    9.620000] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Fri Nov 11 13:58:35 2016 kern.info kernel: [    9.620000] scsi host0: usb-storage 1-1:1.0
Fri Nov 11 13:58:35 2016 user.info kernel: [   10.380000] mount_root: loading kmods from internal overlay
Fri Nov 11 13:58:35 2016 user.info kernel: [   10.610000] block: attempting to load /etc/config/fstab
Fri Nov 11 13:58:35 2016 user.err kernel: [   10.630000] block: unable to load configuration (fstab: Entry not found)
Fri Nov 11 13:58:35 2016 user.err kernel: [   10.630000] block: no usable configuration
Fri Nov 11 13:58:35 2016 kern.notice kernel: [   10.640000] scsi 0:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 user.notice kernel: [   10.650000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Fri Nov 11 13:58:35 2016 kern.info kernel: [   10.680000] eth1: link down
Fri Nov 11 13:58:35 2016 user.info kernel: [   10.700000] procd: - early -
Fri Nov 11 13:58:35 2016 user.info kernel: [   10.700000] procd: - watchdog -
Fri Nov 11 13:58:35 2016 user.info kernel: [   11.610000] procd: - ubus -
Fri Nov 11 13:58:35 2016 user.info kernel: [   12.640000] procd: - init -
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.820000] NET: Registered protocol family 10
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.850000] gre: GRE over IPv4 demultiplexor driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.850000] ip_gre: GRE over IPv4 tunneling driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.910000] u32 classifier
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.920000]     input device check on
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.920000]     Actions configured
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.930000] Mirror/redirect action on
Fri Nov 11 13:58:35 2016 kern.info kernel: [   14.980000] fuse init (API version 7.23)
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.010000] usbcore: registered new interface driver cdc_acm
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.020000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.030000] usbcore: registered new interface driver cdc_wdm
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.070000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.080000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.200000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.220000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.260000] usbcore: registered new interface driver usblp
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.270000] usbcore: registered new interface driver usbserial
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.280000] usbcore: registered new interface driver usbserial_generic
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.290000] usbserial: USB Serial support registered for generic
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.340000] xt_time: kernel timezone is -0000
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.350000] usbcore: registered new interface driver cdc_ether
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.360000] usbcore: registered new interface driver cdc_ncm
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.430000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.530000] PPP generic driver version 2.4.2
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.540000] PPP MPPE Compression module registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.540000] NET: Registered protocol family 24
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.550000] PPTP driver version 0.8.5
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.560000] usbcore: registered new interface driver qmi_wwan
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.570000] usbcore: registered new interface driver rndis_host
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.580000] usbcore: registered new interface driver sierra
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.580000] usbserial: USB Serial support registered for Sierra USB modem
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.590000] usbcore: registered new interface driver sierra_net
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.680000] usbcore: registered new interface driver cdc_mbim
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.690000] usb 1-1: USB disconnect, device number 2
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.700000] usbcore: registered new interface driver option
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.710000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.730000] usbcore: registered new interface driver qcserial
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.740000] usbserial: USB Serial support registered for Qualcomm USB modem
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: EEPROM regdomain: 0x0
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: EEPROM indicates default country code should be used
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: doing EEPROM country->regdmn map search
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: country maps to regdmn code: 0x3a
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: Country alpha2 being used: US
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.780000] ath: Regpair used: 0x3a
Fri Nov 11 13:58:35 2016 kern.debug kernel: [   15.790000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Nov 11 13:58:35 2016 kern.info kernel: [   15.790000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Fri Nov 11 13:58:35 2016 kern.info kernel: [   16.260000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Fri Nov 11 13:58:35 2016 kern.info kernel: [   16.660000] cdc_ether 1-1:1.0 usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 36:4b:50:b7:ef:2d
Fri Nov 11 13:58:35 2016 kern.info kernel: [   16.690000] usb-storage 1-1:1.2: USB Mass Storage device detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [   16.700000] scsi host1: usb-storage 1-1:1.2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [   17.700000] scsi 1:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [   17.730000] scsi 1:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [   17.760000] sd 1:0:0:1: [sda] Attached SCSI removable disk
Fri Nov 11 13:58:37 2016 user.emerg syslog: 'radio0' is disabled
Fri Nov 11 13:58:37 2016 user.emerg syslog: 'radio0' is disabled
Fri Nov 11 13:58:37 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Nov 11 13:58:38 2016 kern.notice kernel: [   24.860000] sd 1:0:0:1: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Fri Nov 11 13:58:38 2016 kern.notice kernel: [   24.890000] sd 1:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Fri Nov 11 13:58:38 2016 daemon.err block: Unkown action change
Fri Nov 11 13:58:38 2016 kern.info kernel: [   25.000000]  sda: sda1 sda2
Fri Nov 11 13:58:38 2016 daemon.err block: Unkown action change
Fri Nov 11 13:58:44 2016 user.emerg syslog: Generating RSA private key, 1024 bit long modulus
Fri Nov 11 13:58:47 2016 kern.info kernel: [   33.720000] device eth1 entered promiscuous mode
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is setting up now
Fri Nov 11 13:58:47 2016 kern.info kernel: [   33.760000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is now up
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is now up
Fri Nov 11 13:58:47 2016 kern.info kernel: [   33.810000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'wan' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'wan6' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Network device 'lo' link is up
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Nov 11 13:58:48 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Nov 11 13:58:48 2016 kern.info kernel: [   35.320000] eth1: link up (1000Mbps/Full duplex)
Fri Nov 11 13:58:48 2016 kern.info kernel: [   35.320000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:48 2016 kern.info kernel: [   35.330000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:48 2016 daemon.notice netifd: Network device 'eth1' link is up
Fri Nov 11 13:58:48 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Nov 11 13:58:48 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Nov 11 13:58:48 2016 kern.info kernel: [   35.360000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Nov 11 13:58:49 2016 daemon.warn odhcpd[1627]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd7f:e461:b6d4::72e/128
Fri Nov 11 13:58:49 2016 user.emerg syslog: Generating selfsigned certificate with subject 'C=ZZ,ST=Somewhere,L=Uknown,CN=OpenWrt,' and validity 20161111125844-20181111125844
Fri Nov 11 13:58:50 2016 daemon.warn odhcpd[1627]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd7f:e461:b6d4::72e/128
Fri Nov 11 13:58:50 2016 daemon.warn odhcpd[1627]: DHCPV6 REQUEST IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd7f:e461:b6d4::72e/128
Fri Nov 11 13:58:50 2016 kern.info kernel: [   37.330000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:53 2016 daemon.err mount_root: no jffs2 marker found
Fri Nov 11 13:58:53 2016 kern.notice kernel: [   40.200000] jffs2: notice: (2131) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: started, version 2.73 cachesize 150
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: DNS service limited to local subnets
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq-dhcp[2133]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: using local addresses only for domain lan
Fri Nov 11 13:58:53 2016 daemon.warn dnsmasq[2133]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: read /etc/hosts - 1 addresses
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: read /tmp/hosts/dhcp - 1 addresses
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq[2133]: read /tmp/hosts/odhcpd - 1 addresses
Fri Nov 11 13:58:53 2016 daemon.info dnsmasq-dhcp[2133]: read /etc/ethers - 0 addresses
Fri Nov 11 13:58:55 2016 daemon.info mount_root: performing overlay whiteout
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led WAN
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led LAN1
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led LAN2
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led LAN3
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led LAN4
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led WLAN
Fri Nov 11 13:58:55 2016 user.emerg syslog: setting up led USB
Fri Nov 11 13:58:57 2016 daemon.info procd: - init complete -
Fri Nov 11 13:59:14 2016 kern.notice kernel: [   60.780000] random: nonblocking pool is initialized

po zrobieniu zgodnie z poradnikiem:
http://eko.one.pl/?p=openwrt-externalroot

mount:

| Machine: TP-Link TL-WR842N/ND v2 |
| Uptime: 0d, 00:01:27 |
| Load: 1.28 0.52 0.19 |
| Flash: total: 1.5MB, free: 1.2MB, used: 17% |
| Memory: total: 27.8MB, free: 12.4MB, used: 55% |
| WAN: |
| LAN: 192.168.1.1 |
----------------------------------------------------------------
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
root@OpenWrt:~#

logread:

root@OpenWrt:~# logread
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.600000] NET: Registered protocol family 1
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 0.610000] PCI: CLS 0 bytes, default 32
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.620000] futex hash table entries: 256 (order: -1, 3072 bytes)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.640000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.650000] msgmni has been set to 55
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.650000] io scheduler noop registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.660000] io scheduler deadline registered (default)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.660000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.670000] console [ttyS0] disabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.700000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.710000] console [ttyS0] enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.710000] bootconsole [early0] disabled
Fri Nov 11 13:58:35 2016 kern.warn kernel: [ 0.740000] m25p80 spi0.0: found s25fl064k, expected m25p80
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.740000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.750000] 5 tp-link partitions found on MTD device spi0.0
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.750000] Creating 5 MTD partitions on "spi0.0":
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.760000] 0x000000000000-0x000000020000 : "u-boot"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.760000] 0x000000020000-0x0000001467e8 : "kernel"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.770000] 0x0000001467e8-0x0000007f0000 : "rootfs"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.780000] mtd: device 2 (rootfs) set to be root filesystem
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.780000] 1 squashfs-split partitions found on MTD device rootfs
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.790000] 0x000000670000-0x0000007f0000 : "rootfs_data"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.800000] 0x0000007f0000-0x000000800000 : "art"
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 0.800000] 0x000000020000-0x0000007f0000 : "firmware"
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 0.830000] libphy: ag71xx_mdio: probed
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 1.420000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 1.430000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.020000] ag71xx-mdio.1: Found an AR934X built-in switch
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.060000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.070000] TCP: cubic registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.070000] NET: Registered protocol family 17
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.080000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 2.090000] Bridge firewalling registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.090000] 8021q: 802.1Q VLAN Support v1.8
Fri Nov 11 13:58:35 2016 kern.err kernel: [ 2.100000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.110000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 2.120000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Fri Nov 11 13:58:35 2016 user.info kernel: [ 3.390000] init: Console is alive
Fri Nov 11 13:58:35 2016 user.info kernel: [ 3.400000] init: - watchdog -
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.520000] usbcore: registered new interface driver usbfs
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.530000] usbcore: registered new interface driver hub
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.530000] usbcore: registered new device driver usb
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 5.580000] SCSI subsystem initialized
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.600000] ehci-platform: EHCI generic platform driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.610000] ehci-platform ehci-platform: EHCI Host Controller
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.620000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.630000] ehci-platform ehci-platform: TX-TX IDP fix enabled
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.630000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.660000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.660000] hub 1-0:1.0: USB hub found
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.670000] hub 1-0:1.0: 1 port detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.680000] ohci-platform: OHCI generic platform driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 5.690000] usbcore: registered new interface driver usb-storage
Fri Nov 11 13:58:35 2016 user.info kernel: [ 6.420000] init: - preinit -
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 7.070000] random: procd urandom read with 11 bits of entropy available
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 8.650000] eth1: link up (1000Mbps/Full duplex)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 9.410000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 9.600000] usb-storage 1-1:1.0: USB Mass Storage device detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 9.610000] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 9.610000] scsi host0: usb-storage 1-1:1.0
Fri Nov 11 13:58:35 2016 user.info kernel: [ 10.380000] mount_root: loading kmods from internal overlay
Fri Nov 11 13:58:35 2016 user.info kernel: [ 10.610000] block: attempting to load /etc/config/fstab
Fri Nov 11 13:58:35 2016 user.err kernel: [ 10.630000] block: unable to load configuration (fstab: Entry not found)
Fri Nov 11 13:58:35 2016 user.err kernel: [ 10.630000] block: no usable configuration
Fri Nov 11 13:58:35 2016 user.notice kernel: [ 10.640000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 10.670000] eth1: link down
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 10.690000] scsi 0:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 user.info kernel: [ 10.700000] procd: - early -
Fri Nov 11 13:58:35 2016 user.info kernel: [ 10.700000] procd: - watchdog -
Fri Nov 11 13:58:35 2016 user.info kernel: [ 11.590000] procd: - ubus -
Fri Nov 11 13:58:35 2016 user.info kernel: [ 12.620000] procd: - init -
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.820000] NET: Registered protocol family 10
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.850000] gre: GRE over IPv4 demultiplexor driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.850000] ip_gre: GRE over IPv4 tunneling driver
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.860000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.910000] u32 classifier
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.910000] input device check on
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.920000] Actions configured
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.920000] Mirror/redirect action on
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.970000] fuse init (API version 7.23)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.980000] usbcore: registered new interface driver cdc_acm
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 14.990000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.050000] usbcore: registered new interface driver cdc_wdm
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.060000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.070000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.200000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.220000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.260000] usbcore: registered new interface driver usblp
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.280000] usbcore: registered new interface driver usbserial
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.280000] usbcore: registered new interface driver usbserial_generic
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.290000] usbserial: USB Serial support registered for generic
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.340000] xt_time: kernel timezone is -0000
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.350000] usbcore: registered new interface driver cdc_ether
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.360000] usbcore: registered new interface driver cdc_ncm
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.420000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.520000] PPP generic driver version 2.4.2
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.530000] PPP MPPE Compression module registered
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.530000] NET: Registered protocol family 24
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.540000] PPTP driver version 0.8.5
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.550000] usbcore: registered new interface driver qmi_wwan
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.560000] usbcore: registered new interface driver rndis_host
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.570000] usbcore: registered new interface driver sierra
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.570000] usbserial: USB Serial support registered for Sierra USB modem
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.580000] usbcore: registered new interface driver sierra_net
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.650000] usbcore: registered new interface driver cdc_mbim
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.680000] usbcore: registered new interface driver option
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.690000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.710000] usbcore: registered new interface driver qcserial
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.720000] usbserial: USB Serial support registered for Qualcomm USB modem
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.720000] usb 1-1: USB disconnect, device number 2
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: EEPROM regdomain: 0x0
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: EEPROM indicates default country code should be used
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: doing EEPROM country->regdmn map search
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: country maps to regdmn code: 0x3a
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: Country alpha2 being used: US
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.770000] ath: Regpair used: 0x3a
Fri Nov 11 13:58:35 2016 kern.debug kernel: [ 15.780000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 15.780000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 16.320000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 16.990000] cdc_ether 1-1:1.0 usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 36:4b:50:b7:ef:2d
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 17.000000] usb-storage 1-1:1.2: USB Mass Storage device detected
Fri Nov 11 13:58:35 2016 kern.info kernel: [ 17.010000] scsi host1: usb-storage 1-1:1.2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 18.140000] scsi 1:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 18.150000] scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Fri Nov 11 13:58:35 2016 kern.notice kernel: [ 18.160000] sd 1:0:0:1: [sda] Attached SCSI removable disk
Fri Nov 11 13:58:37 2016 user.emerg syslog: 'radio0' is disabled
Fri Nov 11 13:58:37 2016 user.emerg syslog: 'radio0' is disabled
Fri Nov 11 13:58:38 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Nov 11 13:58:38 2016 kern.notice kernel: [ 25.170000] sd 1:0:0:1: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Fri Nov 11 13:58:38 2016 kern.notice kernel: [ 25.200000] sd 1:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Fri Nov 11 13:58:38 2016 daemon.err block: Unkown action change
Fri Nov 11 13:58:38 2016 kern.info kernel: [ 25.300000] sda: sda1 sda2
Fri Nov 11 13:58:38 2016 daemon.err block: Unkown action change
Fri Nov 11 13:58:44 2016 user.emerg syslog: Generating RSA private key, 1024 bit long modulus
Fri Nov 11 13:58:46 2016 kern.info kernel: [ 33.620000] device eth1 entered promiscuous mode
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is setting up now
Fri Nov 11 13:58:47 2016 kern.info kernel: [ 33.660000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'lan' is now up
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' is now up
Fri Nov 11 13:58:47 2016 kern.info kernel: [ 33.710000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'wan' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'wan6' is enabled
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Network device 'lo' link is up
Fri Nov 11 13:58:47 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Nov 11 13:58:47 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Nov 11 13:58:49 2016 kern.info kernel: [ 35.720000] eth1: link up (1000Mbps/Full duplex)
Fri Nov 11 13:58:49 2016 kern.info kernel: [ 35.720000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:49 2016 kern.info kernel: [ 35.730000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:49 2016 daemon.notice netifd: Network device 'eth1' link is up
Fri Nov 11 13:58:49 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Nov 11 13:58:49 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Nov 11 13:58:49 2016 kern.info kernel: [ 35.760000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Nov 11 13:58:49 2016 daemon.warn odhcpd[1631]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Fri Nov 11 13:58:50 2016 daemon.warn odhcpd[1631]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Fri Nov 11 13:58:50 2016 daemon.warn odhcpd[1631]: DHCPV6 REQUEST IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Fri Nov 11 13:58:51 2016 kern.info kernel: [ 37.730000] br-lan: port 1(eth1) entered forwarding state
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: started, version 2.73 cachesize 150
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: DNS service limited to local subnets
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq-dhcp[2078]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: using local addresses only for domain lan
Fri Nov 11 13:58:52 2016 daemon.warn dnsmasq[2078]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: read /etc/hosts - 1 addresses
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: read /tmp/hosts/dhcp - 1 addresses
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq[2078]: read /tmp/hosts/odhcpd - 1 addresses
Fri Nov 11 13:58:52 2016 daemon.info dnsmasq-dhcp[2078]: read /etc/ethers - 0 addresses
Fri Nov 11 13:58:58 2016 user.emerg syslog: Generating selfsigned certificate with subject 'C=ZZ,ST=Somewhere,L=Uknown,CN=OpenWrt,' and validity 20161111125844-20181111125844
Fri Nov 11 13:59:01 2016 daemon.err mount_root: no jffs2 marker found
Fri Nov 11 13:59:02 2016 kern.notice kernel: [ 48.680000] jffs2: notice: (2257) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Fri Nov 11 13:59:03 2016 daemon.info mount_root: performing overlay whiteout
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led WAN
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led LAN1
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led LAN2
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led LAN3
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led LAN4
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led WLAN
Fri Nov 11 13:59:03 2016 user.emerg syslog: setting up led USB
Fri Nov 11 13:59:04 2016 daemon.info procd: - init complete -
Fri Nov 11 13:59:12 2016 kern.notice kernel: [ 59.380000] random: nonblocking pool is initialized
Fri Nov 11 13:59:27 2016 authpriv.info dropbear[2316]: Not backgrounding
Fri Nov 11 13:59:34 2016 authpriv.info dropbear[2319]: Child connection from 192.168.1.11:52081
Fri Nov 11 13:59:40 2016 authpriv.notice dropbear[2319]: Password auth succeeded for 'root' from 192.168.1.11:52081

Następnie dodałem w punktach montowania obie partycje:

Po restarcie:
mount:

root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

logread:

root@OpenWrt:~# logread
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 0.830000] libphy: ag71xx_mdio: probed
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 1.420000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 1.430000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.020000] ag71xx-mdio.1: Found an AR934X built-in switch
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.060000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.070000] TCP: cubic registered
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.070000] NET: Registered protocol family 17
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.080000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 2.090000] Bridge firewalling registered
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.090000] 8021q: 802.1Q VLAN Support v1.8
Wed Nov 23 16:41:22 2016 kern.err kernel: [ 2.100000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.110000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 2.120000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Wed Nov 23 16:41:22 2016 user.info kernel: [ 3.400000] init: Console is alive
Wed Nov 23 16:41:22 2016 user.info kernel: [ 3.400000] init: - watchdog -
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.520000] usbcore: registered new interface driver usbfs
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.530000] usbcore: registered new interface driver hub
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.530000] usbcore: registered new device driver usb
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 5.580000] SCSI subsystem initialized
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.590000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.600000] ehci-platform: EHCI generic platform driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.610000] ehci-platform ehci-platform: EHCI Host Controller
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.610000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.620000] ehci-platform ehci-platform: TX-TX IDP fix enabled
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.630000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.660000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.660000] hub 1-0:1.0: USB hub found
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.670000] hub 1-0:1.0: 1 port detected
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.680000] ohci-platform: OHCI generic platform driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 5.690000] usbcore: registered new interface driver usb-storage
Wed Nov 23 16:41:22 2016 user.info kernel: [ 6.420000] init: - preinit -
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 7.070000] random: procd urandom read with 11 bits of entropy available
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 8.650000] eth1: link up (1000Mbps/Full duplex)
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 9.410000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 9.610000] usb-storage 1-1:1.0: USB Mass Storage device detected
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 9.620000] usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 9.620000] scsi host0: usb-storage 1-1:1.0
Wed Nov 23 16:41:22 2016 user.info kernel: [ 10.380000] mount_root: loading kmods from internal overlay
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 10.670000] jffs2: notice: (401) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 23 16:41:22 2016 user.info kernel: [ 10.690000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 10.700000] scsi 0:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Wed Nov 23 16:41:22 2016 user.info kernel: [ 10.710000] block: extroot: device not present, retrying in 5 seconds
Wed Nov 23 16:41:22 2016 user.err kernel: [ 15.720000] block: extroot: cannot find device with UUID d2b644dc-92eb-40d9-8349-9c943a3b81fd
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 15.740000] usb 1-1: USB disconnect, device number 2
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 15.790000] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Wed Nov 23 16:41:22 2016 user.info kernel: [ 15.950000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Wed Nov 23 16:41:22 2016 user.info kernel: [ 15.960000] block: extroot: device not present, retrying in 5 seconds
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 16.250000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 16.440000] usb-storage 1-1:1.2: USB Mass Storage device detected
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 16.450000] scsi host1: usb-storage 1-1:1.2
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 17.450000] scsi 1:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 17.460000] scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 17.470000] sd 1:0:0:1: [sda] Attached SCSI removable disk
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 20.970000] sd 1:0:0:1: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Wed Nov 23 16:41:22 2016 kern.notice kernel: [ 20.980000] sd 1:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.060000] sda: sda1 sda2
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.070000] sd 1:0:0:1: [sda]
Wed Nov 23 16:41:22 2016 kern.warn kernel: [ 21.070000] Result: hostbyte=0x00 driverbyte=0x08
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.080000] sd 1:0:0:1: [sda]
Wed Nov 23 16:41:22 2016 kern.warn kernel: [ 21.080000] Sense Key : 0x6 [current]
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.090000] sd 1:0:0:1: [sda]
Wed Nov 23 16:41:22 2016 kern.warn kernel: [ 21.090000] ASC=0x28 ASCQ=0x0
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.090000] sd 1:0:0:1: [sda] CDB:
Wed Nov 23 16:41:22 2016 kern.warn kernel: [ 21.090000] cdb[0]=0x28: 28 00 00 00 00 08 00 00 20 00
Wed Nov 23 16:41:22 2016 kern.err kernel: [ 21.100000] blk_update_request: I/O error, dev sda, sector 8
Wed Nov 23 16:41:22 2016 user.err kernel: [ 21.110000] block: extroot: cannot find device with UUID d2b644dc-92eb-40d9-8349-9c943a3b81fd
Wed Nov 23 16:41:22 2016 user.info kernel: [ 21.120000] mount_root: switching to jffs2 overlay
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 21.150000] eth1: link down
Wed Nov 23 16:41:22 2016 user.info kernel: [ 21.160000] procd: - early -
Wed Nov 23 16:41:22 2016 user.info kernel: [ 21.170000] procd: - watchdog -
Wed Nov 23 16:41:22 2016 user.info kernel: [ 22.060000] procd: - ubus -
Wed Nov 23 16:41:22 2016 user.info kernel: [ 23.100000] procd: - init -
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 24.790000] sda: sda1 sda2
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.090000] Adding 389628k swap on /dev/sda2. Priority:-1 extents:1 across:389628k
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.620000] NET: Registered protocol family 10
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.670000] gre: GRE over IPv4 demultiplexor driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.680000] ip_gre: GRE over IPv4 tunneling driver
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.690000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.740000] u32 classifier
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.740000] input device check on
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.740000] Actions configured
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.750000] Mirror/redirect action on
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.830000] fuse init (API version 7.23)
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.840000] usbcore: registered new interface driver cdc_acm
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.850000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.860000] usbcore: registered new interface driver cdc_wdm
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.870000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.880000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.890000] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.910000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.970000] usbcore: registered new interface driver usblp
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 25.990000] usbcore: registered new interface driver usbserial
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.000000] usbcore: registered new interface driver usbserial_generic
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.000000] usbserial: USB Serial support registered for generic
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.050000] xt_time: kernel timezone is -0000
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.070000] cdc_ether 1-1:1.0 usb0: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 36:4b:50:b7:ef:2d
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.080000] usbcore: registered new interface driver cdc_ether
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.100000] usbcore: registered new interface driver cdc_ncm
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.180000] usbcore: registered new interface driver huawei_cdc_ncm
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.260000] PPP generic driver version 2.4.2
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.270000] PPP MPPE Compression module registered
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.270000] NET: Registered protocol family 24
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.280000] PPTP driver version 0.8.5
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.290000] usbcore: registered new interface driver qmi_wwan
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.300000] usbcore: registered new interface driver rndis_host
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.310000] usbcore: registered new interface driver sierra
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.310000] usbserial: USB Serial support registered for Sierra USB modem
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.320000] usbcore: registered new interface driver sierra_net
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.400000] usbcore: registered new interface driver cdc_mbim
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.420000] usbcore: registered new interface driver option
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.420000] usbserial: USB Serial support registered for GSM modem (1-port)
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.450000] usbcore: registered new interface driver qcserial
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.450000] usbserial: USB Serial support registered for Qualcomm USB modem
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: EEPROM regdomain: 0x0
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: EEPROM indicates default country code should be used
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: doing EEPROM country->regdmn map search
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: country maps to regdmn code: 0x3a
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: Country alpha2 being used: US
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.490000] ath: Regpair used: 0x3a
Wed Nov 23 16:41:22 2016 kern.debug kernel: [ 26.510000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Nov 23 16:41:22 2016 kern.info kernel: [ 26.510000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Wed Nov 23 16:41:24 2016 user.emerg syslog: 'radio0' is disabled
Wed Nov 23 16:41:24 2016 user.emerg syslog: 'radio0' is disabled
Wed Nov 23 16:41:26 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Wed Nov 23 16:41:26 2016 kern.notice kernel: [ 32.570000] random: nonblocking pool is initialized
Wed Nov 23 16:41:26 2016 daemon.err block: /dev/mtdblock3 is already mounted
Wed Nov 23 16:41:27 2016 authpriv.info dropbear[1335]: Not backgrounding
Wed Nov 23 16:41:32 2016 kern.info kernel: [ 39.070000] device eth1 entered promiscuous mode
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'lan' is enabled
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'lan' is setting up now
Wed Nov 23 16:41:32 2016 kern.info kernel: [ 39.100000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'lan' is now up
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'loopback' is enabled
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'loopback' is now up
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'wan' is enabled
Wed Nov 23 16:41:32 2016 kern.err kernel: [ 39.140000] cdc_ether 1-1:1.0 usb0: kevent 12 may have been dropped
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'wan6' is enabled
Wed Nov 23 16:41:32 2016 kern.info kernel: [ 39.170000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Network device 'lo' link is up
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Network device 'usb0' link is up
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'wan' has link connectivity
Wed Nov 23 16:41:32 2016 daemon.notice netifd: Interface 'wan' is setting up now
Wed Nov 23 16:41:33 2016 daemon.notice netifd: wan (1694): udhcpc (v1.23.2) started
Wed Nov 23 16:41:33 2016 daemon.notice netifd: wan (1694): Sending discover...
Wed Nov 23 16:41:33 2016 daemon.notice netifd: wan (1694): Sending select for 192.168.3.182...
Wed Nov 23 16:41:33 2016 daemon.notice netifd: wan (1694): Lease of 192.168.3.182 obtained, lease time 86400
Wed Nov 23 16:41:34 2016 daemon.notice netifd: Interface 'wan' is now up
Wed Nov 23 16:41:35 2016 kern.info kernel: [ 41.420000] eth1: link up (1000Mbps/Full duplex)
Wed Nov 23 16:41:35 2016 kern.info kernel: [ 41.440000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 16:41:35 2016 kern.info kernel: [ 41.440000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 16:41:35 2016 daemon.notice netifd: Network device 'eth1' link is up
Wed Nov 23 16:41:35 2016 kern.info kernel: [ 41.450000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Nov 23 16:41:35 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Nov 23 16:41:35 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Nov 23 16:41:35 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Nov 23 16:41:35 2016 daemon.warn odhcpd[1291]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led WAN
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led LAN1
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led LAN2
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led LAN3
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led LAN4
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led WLAN
Wed Nov 23 16:41:35 2016 user.emerg syslog: setting up led USB
Wed Nov 23 16:41:36 2016 daemon.info procd: - init complete -
Wed Nov 23 16:41:37 2016 kern.info kernel: [ 43.440000] br-lan: port 1(eth1) entered forwarding state
Wed Nov 23 16:41:37 2016 daemon.warn odhcpd[1291]: DHCPV6 SOLICIT IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 16:41:37 2016 daemon.warn odhcpd[1291]: DHCPV6 REQUEST IA_NA from 000100011fa7a1eb001fd0058446 on br-lan: ok fd6d:6b1a:81fb::72e/128
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: started, version 2.73 cachesize 150
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: DNS service limited to local subnets
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq-dhcp[1842]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: using local addresses only for domain lan
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: reading /tmp/resolv.conf.auto
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: using local addresses only for domain lan
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: using nameserver 192.168.3.1#53
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: read /etc/hosts - 1 addresses
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: read /tmp/hosts/dhcp - 1 addresses
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq[1842]: read /tmp/hosts/odhcpd - 1 addresses
Wed Nov 23 16:41:39 2016 daemon.info dnsmasq-dhcp[1842]: read /etc/ethers - 0 addresses
Wed Nov 23 16:52:31 2016 user.notice firewall: Reloading firewall due to ifup of wan (usb0)
Wed Nov 23 16:52:32 2016 authpriv.info dropbear[2051]: Child connection from 192.168.1.11:52647
Wed Nov 23 16:52:34 2016 user.notice ddns-scripts[2072]: myddns_ipv4: PID '2072' started at 2016-11-23 16:52
Wed Nov 23 16:52:35 2016 user.warn ddns-scripts[2072]: myddns_ipv4: Service section disabled! - TERMINATE
Wed Nov 23 16:52:35 2016 user.warn ddns-scripts[2072]: myddns_ipv4: PID '2072' exit WITH ERROR '1' at 2016-11-23 16:52
Wed Nov 23 16:52:41 2016 authpriv.notice dropbear[2051]: Password auth succeeded for 'root' from 192.168.1.11:52647

przed wszystkimi logami restart osobny.
SDA1 się nie montuje, natomiast SDA2 jako SWAP bez problemu.

2016-11-23 10:11:48

Ok teraz dla jasności na czystej instalacji bez instalowania czegokolwiek. wchodze w interfejsy przełaczam wan na podajże usb0 (nie ma mnie teraz przy routerze) jako klient DHCP i działa. Wchodze w punkty montowania moge dodawać partycje, z czego wnioskuje że wszystko działa prawidłowo?

W jaki sposób jeszcze moge to zweryfikować coś z loga systemu? Opcjonalnie polecenie przez ssh na czystym systemie?

2016-11-23 10:01:27

modem hilink, partycje i karta widoczne normalnie po starcie systemu. Za dużo na jego temat znaleźć nie mogę. W jaki sposób można przełączyć go na stałe?

2016-11-23 09:57:53

Witam

Próbuje uruchomić extroot i swap na karcie w modemie mf823. O ile swap robi się bez problemu (sda2) tak extroot się nie montuje prawidłowo (sda1) :

block: extroot: cannot find device with UUID 02f6335b-c36e-403b-b9bd-46a1c88e6e1c

UUID prawidłowe, próbowałem montować jako sda1 problem ten sam. System plików na partycji to EXT4.
Ponadto wchodząc w punkty montowania widze prawidlowo SDA1 zamontowane ale dostępne miejsce w root jest domyślnie 1,5MB.

Jeśli zamiast modemu wsadze pendrive działa bez problemu.

Nie zabardzo rozumiem wczym problem bo 2 partycja montuje się normalnie jako SWAP.

Miał ktoś podobny problem? Openwrt wgrane aktualne świeża instalacja.

2015-07-30 14:50:33

dziękuje za pomoc. Problem udało się na szczęście rozwiązać, odpowiedź w poście powyżej.

Pozdrawiam

2015-07-30 14:05:18

Witam ponownie, przepraszam za dłuższą przerwę.

rozumiem że przestawienie w tryb ncm zgodnie z tym poradnikiem?
http://eko.one.pl/forum/viewtopic.php?id=11470

Po przeprowadzeniu całej operacji log:
http://wklej.org/id/1765541/

a w interfejsach z poziomu gui otrzymuje informację nieobsługiwany protokół

z tego co wyczytałem aby działało tak jak należy trzeba wymusić prace tylko w lte. Jak tego dokonać na tym konkretnym modelu?

Edit:

Problem rozwiązny. Przywróciłem ustawienia fabryczne i zgodnie z tematem:
http://eko.one.pl/forum/viewtopic.php?id=10892
wzkonalem przez ssh :
echo "AT^SYSCFGEX=\"0302\",3fffffff,2,4,7fffffffffffffff,, " > /dev/ttyUSB0

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 13 z 14)

Znalezione posty: 301 do 325 z 334

301 Odpowiedź przez batorencjusz 2018-07-22 11:27:27

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

302 Odpowiedź przez batorencjusz 2018-07-20 09:08:10

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

303 Odpowiedź przez batorencjusz 2018-07-17 06:32:35

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

304 Odpowiedź przez batorencjusz 2018-07-16 21:31:35

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

305 Odpowiedź przez batorencjusz 2018-07-16 19:57:50

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

306 Odpowiedź przez batorencjusz 2018-07-16 16:33:00

Odp: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

307 Temat przez batorencjusz 2018-07-16 08:33:39

Temat: Problem z VLAN na windows 10 (17 odpowiedzi, napisanych Oprogramowanie / Software)

308 Odpowiedź przez batorencjusz 2018-02-19 16:40:29

Odp: Dobór sprzętu pod router OpenWRT/LEDE (2 odpowiedzi, napisanych Sprzęt / Hardware)

309 Temat przez batorencjusz 2018-02-19 16:17:46

Temat: Dobór sprzętu pod router OpenWRT/LEDE (2 odpowiedzi, napisanych Sprzęt / Hardware)

310 Odpowiedź przez batorencjusz 2017-05-26 11:54:46

Odp: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

311 Odpowiedź przez batorencjusz 2017-05-26 11:48:47

Odp: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

312 Odpowiedź przez batorencjusz 2017-05-26 11:43:53

Odp: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

313 Odpowiedź przez batorencjusz 2017-05-26 11:29:46

Odp: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

314 Odpowiedź przez batorencjusz 2017-05-26 10:01:27

Odp: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

315 Temat przez batorencjusz 2017-05-25 15:15:08

Temat: EasyBOX 802/ARV752DPW separacja VLAN? (11 odpowiedzi, napisanych Oprogramowanie / Software)

316 Odpowiedź przez batorencjusz 2017-03-17 10:17:33

Odp: Vodofone EasyBox 802 (6 odpowiedzi, napisanych Sprzęt / Hardware)

317 Odpowiedź przez batorencjusz 2017-03-16 14:59:06

Odp: Vodofone EasyBox 802 (6 odpowiedzi, napisanych Sprzęt / Hardware)

318 Odpowiedź przez batorencjusz 2017-03-15 17:52:14

Odp: Vodofone EasyBox 802 (6 odpowiedzi, napisanych Sprzęt / Hardware)

319 Odpowiedź przez batorencjusz 2016-11-23 17:11:42

Odp: 842ND mf823 extroot problem (9 odpowiedzi, napisanych Oprogramowanie / Software)

320 Odpowiedź przez batorencjusz 2016-11-23 16:55:50

Odp: 842ND mf823 extroot problem (9 odpowiedzi, napisanych Oprogramowanie / Software)

321 Odpowiedź przez batorencjusz 2016-11-23 10:11:48

Odp: 842ND mf823 extroot problem (9 odpowiedzi, napisanych Oprogramowanie / Software)

322 Odpowiedź przez batorencjusz 2016-11-23 10:01:27

Odp: 842ND mf823 extroot problem (9 odpowiedzi, napisanych Oprogramowanie / Software)

323 Temat przez batorencjusz 2016-11-23 09:57:53

Temat: 842ND mf823 extroot problem (9 odpowiedzi, napisanych Oprogramowanie / Software)

324 Odpowiedź przez batorencjusz 2015-07-30 14:50:33

Odp: e3372s-153 na routerze 1043nd problem z połączeniem. (16 odpowiedzi, napisanych Oprogramowanie / Software)

325 Odpowiedź przez batorencjusz 2015-07-30 14:05:18

Odp: e3372s-153 na routerze 1043nd problem z połączeniem. (16 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 301 do 325 z 334