1 Temat przez exen

  • exen
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-13
  • Posty: 15

Temat: ZTE MF631 na MR-3420 - nie łączy

Witam!
Pomóżcie chłopaki bo już nie daję rady...
Zainstalowane Gargoyle 1.5.6 (32751), by obsy. Modem ZTE MF631 [PLAY] nie łączy się z siecią - nie pobiera adresów ip.
logi podłączeniu modemu do usb:

Jan  1 01:04:31 Gargoyle user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 4
Jan  1 01:04:31 Gargoyle user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 01:04:31 Gargoyle user.info kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jan  1 01:04:31 Gargoyle user.debug kernel: usb-storage: device found at 4
Jan  1 01:04:31 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 01:04:31 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=MF6310ZTED010000
Jan  1 01:04:31 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:2000 for mode switching
Jan  1 01:04:31 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:2000 on 001/004
Jan  1 01:04:36 Gargoyle user.info kernel: usb 1-1: USB disconnect, address 4
Jan  1 01:04:37 Gargoyle user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 5
Jan  1 01:04:37 Gargoyle user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 01:04:37 Gargoyle user.info kernel: option 1-1:1.0: GSM modem (1-port) converter detected
Jan  1 01:04:37 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Jan  1 01:04:37 Gargoyle user.info kernel: option 1-1:1.1: GSM modem (1-port) converter detected
Jan  1 01:04:37 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Jan  1 01:04:37 Gargoyle user.info kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jan  1 01:04:37 Gargoyle user.info kernel: option 1-1:1.3: GSM modem (1-port) converter detected
Jan  1 01:04:37 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Jan  1 01:04:37 Gargoyle user.debug kernel: usb-storage: device found at 5
Jan  1 01:04:37 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 01:04:38 Gargoyle syslog.notice usb_modeswitch: switched to 19d2:0031 on 001/004
Jan  1 01:04:39 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=MF6310ZTED010000
Jan  1 01:04:39 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:0031 for mode switching
Jan  1 01:04:39 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:0031 on 001/005
Jan  1 01:04:39 Gargoyle user.info kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jan  1 01:04:39 Gargoyle user.info kernel: option 1-1:1.0: device disconnected
Jan  1 01:04:42 Gargoyle user.notice kernel: scsi 3:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
Jan  1 01:04:42 Gargoyle user.notice kernel: sd 3:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:04:42 Gargoyle user.debug kernel: usb-storage: device scan complete
Jan  1 01:04:47 Gargoyle daemon.err pppd[1788]: unrecognized option '/dev/ttyUSB2'
Jan  1 01:05:12 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jan  1 01:05:13 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:0031 on 001/005
Jan  1 01:05:47 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jan  1 01:05:48 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:0031 on 001/005
Jan  1 01:06:21 Gargoyle user.notice usb-modeswitch: switching seemingly failed
Jan  1 01:06:22 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:0031 on 001/005

Próbowałem oczywiście łączyć po /dev/ttyUSB2 ale brak akcji.
Z góry dziękuję!

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,410

Odp: ZTE MF631 na MR-3420 - nie łączy

Czy dobrze widzę? 19d2:2000 przełączył do 19d2:0031 , a później 19d2:0031 próbował przełączył, odłączył interfejsy szeregowe i pojawił się tylko nośnik.

Masz katalog /etc/usb_modeswitch.d/19d2:0031 ?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez exen

  • exen
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-13
  • Posty: 15

Odp: ZTE MF631 na MR-3420 - nie łączy

Taki właśnie dziwny ten modem. W zasadzie z innymi modemami nigdy nie było problemu. Podłączyłem i działało ;]

Tak, jest ten katalog. Co można z tym zrobić?
Mylisz, ze ma szanse to zadziałać?

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,410

Odp: ZTE MF631 na MR-3420 - nie łączy

Wywal go (w sensie katalog 19d2:0031)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez exen

  • exen
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-03-13
  • Posty: 15

Odp: ZTE MF631 na MR-3420 - nie łączy

Cezary napisał/a:

Wywal go (w sensie katalog 19d2:0031)

Jesteś mistrzem - dzięki!

To był plik - nie katalog. Nie miałem wcześniej pewności.
Na początek zmieniłem jego nazwę ale i tak domyślał się, który to plik. Taka sprytna bestyjka.
rm -f 19d2:0031 i po temacie...
dzięki wielkie!

6 Odpowiedź przez Merlinek

  • Zarejestrowany: 2012-08-02
  • Posty: 2

Odp: ZTE MF631 na MR-3420 - nie łączy

Witam

Dla potomności napiszę tylko że połączenie WR1043ND z ZTE MF100 dawało ten sam błąd i wywalenie tego katalogu pomogło smile

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,410

Odp: ZTE MF631 na MR-3420 - nie łączy

Tak, plik. Ale to oznacza że coś jest nie tak jak powinno. W ogóle to dziwny modem że po przełączeniu można go było cofnąć znów do nośnika.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez Merlinek

  • Zarejestrowany: 2012-08-02
  • Posty: 2

Odp: ZTE MF631 na MR-3420 - nie łączy

Chyba za wcześnie się pochwaliłem...

Po restarcie routera, bez podpiętego modemu i późniejszym wpięciu router się po chwili restartuje
Poniżej co pokazują logi od momentu podpięci do restartu:

root@Gargoyle:~$ logread -f
Aug  2 09:19:46 Gargoyle user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 2
Aug  2 09:19:46 Gargoyle user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Aug  2 09:19:46 Gargoyle user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Aug  2 09:19:46 Gargoyle user.debug kernel: usb-storage: device found at 2
Aug  2 09:19:46 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Aug  2 09:19:46 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P671A1NETD010000
Aug  2 09:19:46 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:2000 for mode switching
Aug  2 09:19:47 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:2000 on 001/002
Aug  2 09:19:52 Gargoyle user.info kernel: usb 1-1: USB disconnect, address 2
Aug  2 09:19:57 Gargoyle user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 3
Aug  2 09:19:57 Gargoyle user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Aug  2 09:19:57 Gargoyle user.info kernel: option 1-1:1.0: GSM modem (1-port) converter detected
Aug  2 09:19:57 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Aug  2 09:19:57 Gargoyle user.info kernel: option 1-1:1.1: GSM modem (1-port) converter detected
Aug  2 09:19:57 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Aug  2 09:19:57 Gargoyle user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Aug  2 09:19:57 Gargoyle user.info kernel: option 1-1:1.3: GSM modem (1-port) converter detected
Aug  2 09:19:57 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Aug  2 09:19:57 Gargoyle user.debug kernel: usb-storage: device found at 3
Aug  2 09:19:57 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Aug  2 09:19:58 Gargoyle syslog.notice usb_modeswitch: switched to 19d2:0031 on 001/002
Aug  2 09:20:00 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P671A1NETD010000
Aug  2 09:20:01 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P671A1NETD010000
Aug  2 09:20:01 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P671A1NETD010000
Aug  2 09:20:01 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P671A1NETD010000
Aug  2 09:20:01 Gargoyle user.notice 3g-hotplug: Starting interface wan for device ttyUSB2
Aug  2 09:20:02 Gargoyle user.notice kernel: scsi 1:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
Aug  2 09:20:02 Gargoyle user.debug kernel: usb-storage: device scan complete
Aug  2 09:20:02 Gargoyle user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI removable disk
Aug  2 09:20:06 Gargoyle daemon.notice pppd[1811]: pppd 2.4.5 started by root, uid 0
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: abort on (BUSY)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: abort on (NO CARRIER)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: abort on (ERROR)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: report (CONNECT)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: timeout set to 10 seconds
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: send (AT&F^M)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: expect (OK)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: AT&F^M^M
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: OK
Aug  2 09:20:07 Gargoyle local2.info chat[1816]:  -- got it
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: send (ATE1^M)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: expect (OK)
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: ^M
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: ATE1^M^M
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: OK
Aug  2 09:20:07 Gargoyle local2.info chat[1816]:  -- got it
Aug  2 09:20:07 Gargoyle local2.info chat[1816]: send (AT+CGDCONT=1,"IP","internet"^M)
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: timeout set to 30 seconds
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: expect (OK)
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: ^M
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: AT+CGDCONT=1,"IP","internet"^M^M
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: OK
Aug  2 09:20:08 Gargoyle local2.info chat[1816]:  -- got it
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: send (ATD*99***1#^M)
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: expect (CONNECT)
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: ^M
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: ATD*99***1#^M^M
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: CONNECT
Aug  2 09:20:08 Gargoyle local2.info chat[1816]:  -- got it
Aug  2 09:20:08 Gargoyle local2.info chat[1816]: send ( ^M)
Aug  2 09:20:08 Gargoyle daemon.info pppd[1811]: Serial connection established.
Aug  2 09:20:08 Gargoyle daemon.info pppd[1811]: Using interface 3g-wan
Aug  2 09:20:08 Gargoyle daemon.notice pppd[1811]: Connect: 3g-wan <--> /dev/ttyUSB2
Aug  2 09:20:09 Gargoyle daemon.info pppd[1811]: CHAP authentication succeeded
Aug  2 09:20:09 Gargoyle daemon.notice pppd[1811]: CHAP authentication succeeded
Aug  2 09:20:14 Gargoyle daemon.warn pppd[1811]: Could not determine remote IP address: defaulting to 10.64.64.64
Aug  2 09:20:14 Gargoyle daemon.notice pppd[1811]: local  IP address 37.225.183.160
Aug  2 09:20:14 Gargoyle daemon.notice pppd[1811]: remote IP address 10.64.64.64
Aug  2 09:20:14 Gargoyle daemon.notice pppd[1811]: primary   DNS address 79.163.127.70
Aug  2 09:20:14 Gargoyle daemon.notice pppd[1811]: secondary DNS address 217.116.100.65
Aug  2 09:20:14 Gargoyle user.notice ifup: Enabling Router Solicitations on wan (3g-wan)
Aug  2 09:20:15 Gargoyle user.info firewall: adding wan (3g-wan) to zone wan
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: reading /tmp/resolv.conf.auto
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 217.116.100.65#53
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 79.163.127.70#53
Aug  2 09:20:16 Gargoyle daemon.warn dnsmasq[1349]: ignoring nameserver 192.168.1.1 - local interface
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain micro
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain micro
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain micro
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain oss
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain oss
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain oss
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain null
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain null
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain null
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain ing
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain ing
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain ing
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain indy
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain indy
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain indy
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain gopher
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain gopher
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain gopher
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain geek
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain geek
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain geek
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain fur
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain fur
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain fur
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain free
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain free
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain free
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain bbs
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain bbs
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain bbs
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain dyn
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain dyn
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain dyn
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain parody
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain parody
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain parody
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.142.171.235#53 for domain glue
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 95.211.32.162#53 for domain glue
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 66.244.95.20#53 for domain glue
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 78.47.86.43#53 for domain bit
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using nameserver 178.32.31.41#53 for domain bit
Aug  2 09:20:16 Gargoyle daemon.info dnsmasq[1349]: using local addresses only for domain lan
Aug  2 09:20:19 Gargoyle cron.err crond[2062]: crond (busybox 1.15.3) started, log level 9
Aug  2 09:20:20 Gargoyle user.warn kernel: ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
Aug  2 09:20:20 Gargoyle user.warn kernel:                old minutes west=0, new minutes west=-120

Czy winą może być za mały prąd na USB ?

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,410

Odp: ZTE MF631 na MR-3420 - nie łączy

6s połączenia wytrzymał. Możesz faktycznie sprawdzić z hubem usb zasilanym.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona